Bio


The Melosh group explores how to apply new methods from the semiconductor and self-assembly fields to important problems in biology, materials, and energy. We think about how to rationally design engineered interfaces to enhance communication with biological cells and tissues, or to improve energy conversion and materials synthesis. In particular, we are interested in seamlessly integrating inorganic structures together with biology for improved cell transfection and therapies, and designing new materials, often using diamondoid molecules as building blocks.
My group is very interested in how to design new inorganic structures that will seamless integrate with biological systems to address problems that are not feasible by other means. This involves both fundamental work such as to deeply understand how lipid membranes interact with inorganic surfaces, electrokinetic phenomena in biologically relevant solutions, and applying this knowledge into new device designs. Examples of this include “nanostraw” drug delivery platforms for direct delivery or extraction of material through the cell wall using a biomimetic gap-junction made using nanoscale semiconductor processing techniques. We also engineer materials and structures for neural interfaces and electronics pertinent to highly parallel data acquisition and recording. For instance, we have created inorganic electrodes that mimic the hydrophobic banding of natural transmembrane proteins, allowing them to ‘fuse’ into the cell wall, providing a tight electrical junction for solid-state patch clamping. In addition to significant efforts at engineering surfaces at the molecular level, we also work on ‘bridge’ projects that span between engineering and biological/clinical needs. My long history with nano- and microfabrication techniques and their interactions with biological constructs provide the skills necessary to fabricate and analyze new bio-electronic systems.


Research Interests:
Bio-inorganic Interface
Molecular materials at interfaces
Self-Assembly and Nucleation and Growth

Administrative Appointments


  • Director, Stanford Nanofabrication Center (2018 - Present)

Professional Education


  • PhD, University of California at Santa Barbara, Materials Science and Engineering (2001)
  • BS, Harvey Mudd College, Chemistry (1996)

2023-24 Courses


Stanford Advisees


All Publications


  • Direct electron beam patterning of electro-optically active PEDOT:PSS NANOPHOTONICS Doshi, S., Ludescher, D., Karst, J., Floess, M., Carlstrom, J., Li, B., Hemed, N., Duh, Y., Melosh, N. A., Hentschel, M., Brongersma, M., Giessen, H. 2024
  • Efficient Photonic Integration of Diamond Color Centers and Thin-Film Lithium Niobate ACS PHOTONICS Riedel, D., Lee, H., Herrmann, J. F., Grzesik, J., Ansari, V., Borit, J., Stokowski, H. S., Aghaeimeibodi, S., Lu, H., McQuade, P. J., Melosh, N. A., Shen, Z., Safavi-Naeini, A. H., Vuckovic, J. 2023; 10 (12): 4236-4243
  • A CMOS-based highly scalable flexible neural electrode interface. Science advances Zhao, E. T., Hull, J. M., Mintz Hemed, N., Uluşan, H., Bartram, J., Zhang, A., Wang, P., Pham, A., Ronchi, S., Huguenard, J. R., Hierlemann, A., Melosh, N. A. 2023; 9 (23): eadf9524

    Abstract

    Perception, thoughts, and actions are encoded by the coordinated activity of large neuronal populations spread over large areas. However, existing electrophysiological devices are limited by their scalability in capturing this cortex-wide activity. Here, we developed an electrode connector based on an ultra-conformable thin-film electrode array that self-assembles onto silicon microelectrode arrays enabling multithousand channel counts at a millimeter scale. The interconnects are formed using microfabricated electrode pads suspended by thin support arms, termed Flex2Chip. Capillary-assisted assembly drives the pads to deform toward the chip surface, and van der Waals forces maintain this deformation, establishing Ohmic contact. Flex2Chip arrays successfully measured extracellular action potentials ex vivo and resolved micrometer scale seizure propagation trajectories in epileptic mice. We find that seizure dynamics in absence epilepsy in the Scn8a+/- model do not have constant propagation trajectories.

    View details for DOI 10.1126/sciadv.adf9524

    View details for PubMedID 37285436

    View details for PubMedCentralID PMC10246892

  • Direct-print three-dimensional electrodes for large- scale, high-density, and customizable neural inter- faces. bioRxiv : the preprint server for biology Wang, P., Wu, E. G., Uluşan, H., Phillips, A. J., Rose Hays, M., Kling, A., Zhao, E. T., Madugula, S., Vilkhu, R. S., Vasireddy, P. K., Hier-Lemann, A., Hong, G., Chichilnisky, E. J., Melosh, N. A. 2023

    Abstract

    Silicon-based planar microelectronics is a powerful tool for scalably recording and modulating neural activity at high spatiotemporal resolution, but it remains challenging to target neural structures in three dimensions (3D). We present a method for directly fabricating 3D arrays of tissue-penetrating microelectrodes onto silicon microelectronics. Leveraging a high-resolution 3D printing technology based on 2-photon polymerization and scalable microfabrication processes, we fabricated arrays of 6,600 microelectrodes 10-130 μm tall and at 35-μm pitch onto a planar silicon-based microelectrode array. The process enables customizable electrode shape, height and positioning for precise targeting of neuron populations distributed in 3D. As a proof of concept, we addressed the challenge of specifically targeting retinal ganglion cell (RGC) somas when interfacing with the retina. The array was customized for insertion into the retina and recording from somas while avoiding the axon layer. We verified locations of the microelectrodes with confocal microscopy and recorded high-resolution spontaneous RGC activity at cellular resolution. This revealed strong somatic and dendritic components with little axon contribution, unlike recordings with planar microelectrode arrays. The technology could be a versatile solution for interfacing silicon microelectronics with neural structures and modulating neural activity at large scale with single-cell resolution.

    View details for DOI 10.1101/2023.05.30.542925

    View details for PubMedID 37398164

    View details for PubMedCentralID PMC10312573

  • On-Demand, Reversible, Ultrasensitive Polymer Membrane Based on Molecular Imprinting Polymer. ACS nano Mintz Hemed, N., Leal-Ortiz, S., Zhao, E. T., Melosh, N. A. 2023

    Abstract

    The development of in vivo, longitudinal, real-time monitoring devices is an essential step toward continuous, precision health monitoring. Molecularly imprinted polymers (MIPs) are popular sensor capture agents that are more robust than antibodies and have been used for sensors, drug delivery, affinity separations, assays, and solid-phase extraction. However, MIP sensors are typically limited to one-time use due to their high binding affinity (>107 M-1) and slow-release kinetics (<10-4 muM/sec). To overcome this challenge, current research has focused on stimuli-responsive MIPs (SR-MIPs), which undergo a conformational change induced by external stimuli to reverse molecular binding, requiring additional chemicals or outside stimuli. Here, we demonstrate fully reversible MIP sensors based on electrostatic repulsion. Once the target analyte is bound within a thin film MIP on an electrode, a small electrical potential successfully releases the bound molecules, enabling repeated, accurate measurements. We demonstrate an electrostatically refreshed dopamine sensor with a 760 pM limit of detection, linear response profile, and accuracy even after 30 sensing-release cycles. These sensors could repeatedly detect <1 nM dopamine released from PC-12 cells in vitro, demonstrating they can longitudinally measure low concentrations in complex biological environments without clogging. Our work provides a simple and effective strategy for enhancing the use of MIPs-based biosensors for all charged molecules in continuous, real-time health monitoring and other sensing applications.

    View details for DOI 10.1021/acsnano.2c11618

    View details for PubMedID 36913954

  • Decoding and Modulation of Spiking Activity of the Sciatic Nerve in an Awake and Moving Rodent Fischer, K. S., Zhao, E. T., Maan, Z., Barrera, J., Noishiki, C., Litmanovich, B., Henn, D., Mojadidi, S. M., Gonzalez, J., Sivaraj, D., Hostler, A., Hahn, W., Chen, K., Melosh, N., Gurtner, G. C. WILEY. 2023: 267-268
  • An integrated perspective for the diagnosis and therapy of neurodevelopmental disorders - From an engineering point of view. Advanced drug delivery reviews Mintz Hemed, N., Melosh, N. A. 2023; 194: 114723

    Abstract

    Neurodevelopmental disorders (NDDs) are complex conditions with largely unknown pathophysiology. While many NDD symptoms are familiar, the cause of these disorders remains unclear and may involve a combination of genetic, biological, psychosocial, and environmental risk factors. Current diagnosis relies heavily on behaviorally defined criteria, which may be biased by the clinical team's professional and cultural expectations, thus a push for new biological-based biomarkers for NDDs diagnosis is underway. Emerging new research technologies offer an unprecedented view into the electrical, chemical, and physiological activity in the brain and with further development in humans may provide clinically relevant diagnoses. These could also be extended to new treatment options, which can start to address the underlying physiological issues. When combined with current speech, language, occupational therapy, and pharmacological treatment these could greatly improve patient outcomes. The current review will discuss the latest technologies that are being used or may be used for NDDs diagnosis and treatment. The aim is to provide an inspiring and forward-looking view for future research in the field.

    View details for DOI 10.1016/j.addr.2023.114723

    View details for PubMedID 36746077

  • Heterologous reporter expression in the planarian Schmidtea mediterranea through somatic mRNA transfection. Cell reports methods Hall, R. N., Weill, U., Drees, L., Leal-Ortiz, S., Li, H., Khariton, M., Chai, C., Xue, Y., Rosental, B., Quake, S. R., Sanchez Alvarado, A., Melosh, N. A., Fire, A. Z., Rink, J. C., Wang, B. 2022; 2 (10): 100298

    Abstract

    Planarians have long been studied for their regenerative abilities. Moving forward, tools for ectopic expression of non-native proteins will be of substantial value. Using a luminescent reporter to overcome the strong autofluorescence of planarian tissues, we demonstrate heterologous protein expression in planarian cells and live animals. Our approach is based on the introduction of mRNA through several nanotechnological and chemical transfection methods. We improve reporter expression by altering untranslated region (UTR) sequences and codon bias, facilitating the measurement of expression kinetics in both isolated cells and whole planarians using luminescence imaging. We also examine protein expression as a function of variations in the UTRs of delivered mRNA, demonstrating a framework to investigate gene regulation at the post-transcriptional level. Together, these advances expand the toolbox for the mechanistic analysis of planarian biology and establish a foundation for the development and expansion of transgenic techniques in this unique model system.

    View details for DOI 10.1016/j.crmeth.2022.100298

    View details for PubMedID 36313809

  • Wafer-scale microfabrication of flexible organic electrochemical transistors FLEXIBLE AND PRINTED ELECTRONICS Thiburce, Q., Melosh, N., Salleo, A. 2022; 7 (3)
  • Ag-Diamond Core-Shell Nanostructures Incorporated with Silicon-Vacancy Centers. ACS materials Au Li, S., Francaviglia, L., Kohler, D. D., Jones, Z. R., Zhao, E. T., Ogletree, D. F., Weber-Bargioni, A., Melosh, N. A., Hamers, R. J. 2022; 2 (2): 85-93

    Abstract

    Silicon-vacancy (SiV) centers in diamond have attracted attention as highly stable fluorophores for sensing and as possible candidates for quantum information science. While prior studies have shown that the formation of hybrid diamond-metal structures can increase the rates of optical absorption and emission, many practical applications require diamond plasmonic structures that are stable in harsh chemical and thermal environments. Here, we demonstrate that Ag nanospheres, produced both in quasi-random arrays by thermal dewetting and in ordered arrays using electron-beam lithography, can be completely encapsulated with a thin diamond coating containing SiV centers, leading to hybrid core-shell nanostructures exhibiting extraordinary chemical and thermal stability as well as enhanced optical properties. Diamond shells with a thickness on the order of 20-100 nm are sufficient to encapsulate and protect the Ag nanostructures with different sizes ranging from 20 nm to hundreds of nanometers, allowing them to withstand heating to temperatures of 1000 °C and immersion in harsh boiling acid for 24 h. Ultrafast photoluminescence lifetime and super-resolution optical imaging experiments were used to study the SiV properties on and off the core-shell structures, which show that the SiV on core-shell structures have higher brightness and faster decay rate. The stability and optical properties of the hybrid Ag-diamond core-shell structures make them attractive candidates for high-efficiency imaging and quantum-based sensing applications.

    View details for DOI 10.1021/acsmaterialsau.1c00027

    View details for PubMedID 36855764

    View details for PubMedCentralID PMC9888652

  • Mechanical Stimulation after Centrifuge-Free Nano-Electroporative Transfection Is Efficient and Maintains Long-Term T Cell Functionalities. Small (Weinheim an der Bergstrasse, Germany) Tay, A., Melosh, N. 2021: e2103198

    Abstract

    Transfection is an essential step in genetic engineering and cell therapies. While a number of non-viral micro- and nano-technologies have been developed to deliver DNA plasmids into the cell cytoplasm, one of the most challenging and least efficient steps is DNA transport to and expression in the nucleus. Here, the magnetic nano-electro-injection (MagNEI) platform is described which makes use of oscillatory mechanical stimulation after cytoplasmic delivery with high aspect-ratio nano-structures to achieve stable (>2 weeks) net transfection efficiency (efficiency*viability) of 50% in primary human T cells. This is, to the best of the authors' knowledge, the highest net efficiency reported for primary T cells using a centrifuge-free, non-viral transfection method, in the absence of cell selection, and with a clinically relevant cargo size (>12kbp). Wireless mechanical stimulation downregulates the expression of microtubule motor protein gene, KIF2A, which increases local DNA concentration near the nuclei, resulting in enhanced DNA transfection. Magnetic forces also accelerate membrane repair by promoting actin cytoskeletal remodeling which preserves key biological attributes including cell proliferation and gene expressions. These results demonstrate MagNEI as a powerful non-viral transfection technique for progress toward fully closed, end-to-end T cell manufacturing with less human labor, lower production cost, and shorter delay.

    View details for DOI 10.1002/smll.202103198

    View details for PubMedID 34396686

  • Quantum Photonic Interface for Tin-Vacancy Centers in Diamond PHYSICAL REVIEW X Rugar, A. E., Aghaeimeibodi, S., Riedel, D., Dory, C., Lu, H., McQuade, P. J., Shen, Z., Melosh, N. A., Vuckovic, J. 2021; 11 (3)
  • Narrow-linewidth tin-vacancy centers in diamond waveguides Rugar, A. E., Aghaeimeibodi, S., Dory, C., Lu, H., McQuade, P. J., Mishra, S., Sun, S., Shen, Z., Melosh, N. A., Vuckovic, J., IEEE IEEE. 2021
  • Narrow-Linewidth Tin-Vacancy Centers in a Diamond Waveguide ACS PHOTONICS Rugar, A. E., Dory, C., Aghaeimeibodi, S., Lu, H., Sun, S., Mishra, S., Shen, Z., Melosh, N. A., Vuckovic, J. 2020; 7 (9): 2356–61
  • Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth. Nano letters Rugar, A. E., Lu, H., Dory, C., Sun, S., McQuade, P. J., Shen, Z., Melosh, N. A., Vuckovic, J. 2020

    Abstract

    Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV-) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV- centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.

    View details for DOI 10.1021/acs.nanolett.9b04495

    View details for PubMedID 32031821

  • Synergistic enhancement of electrocatalytic CO2 reduction to C2 oxygenates at nitrogen-doped nanodiamonds/Cu interface. Nature nanotechnology Wang, H., Tzeng, Y., Ji, Y., Li, Y., Li, J., Zheng, X., Yang, A., Liu, Y., Gong, Y., Cai, L., Li, Y., Zhang, X., Chen, W., Liu, B., Lu, H., Melosh, N. A., Shen, Z., Chan, K., Tan, T., Chu, S., Cui, Y. 2020

    Abstract

    To date, effective control over the electrochemical reduction of CO2 to multicarbon products (C≥2) has been very challenging. Here, we report a design principle for the creation of a selective yet robust catalytic interface for heterogeneous electrocatalysts in the reduction of CO2 to C2 oxygenates, demonstrated by rational tuning of an assembly of nitrogen-doped nanodiamonds and copper nanoparticles. The catalyst exhibits a Faradaic efficiency of ~63% towards C2 oxygenates at applied potentials of only -0.5V versus reversible hydrogen electrode. Moreover, this catalyst shows an unprecedented persistent catalytic performance up to 120h, with steady current and only 19% activity decay. Density functional theory calculations show that CO binding is strengthened at the copper/nanodiamond interface, suppressing CO desorption and promoting C2 production by lowering the apparent barrier for CO dimerization. The inherent compositional and electronic tunability of the catalyst assembly offers an unrivalled degree of control over the catalytic interface, and thereby the reaction energetics and kinetics.

    View details for DOI 10.1038/s41565-019-0603-y

    View details for PubMedID 31907442

  • Massively parallel microwire arrays integrated with CMOS chips for neural recording. Science advances Obaid, A. n., Hanna, M. E., Wu, Y. W., Kollo, M. n., Racz, R. n., Angle, M. R., Müller, J. n., Brackbill, N. n., Wray, W. n., Franke, F. n., Chichilnisky, E. J., Hierlemann, A. n., Ding, J. B., Schaefer, A. T., Melosh, N. A. 2020; 6 (12): eaay2789

    Abstract

    Multi-channel electrical recordings of neural activity in the brain is an increasingly powerful method revealing new aspects of neural communication, computation, and prosthetics. However, while planar silicon-based CMOS devices in conventional electronics scale rapidly, neural interface devices have not kept pace. Here, we present a new strategy to interface silicon-based chips with three-dimensional microwire arrays, providing the link between rapidly-developing electronics and high density neural interfaces. The system consists of a bundle of microwires mated to large-scale microelectrode arrays, such as camera chips. This system has excellent recording performance, demonstrated via single unit and local-field potential recordings in isolated retina and in the motor cortex or striatum of awake moving mice. The modular design enables a variety of microwire types and sizes to be integrated with different types of pixel arrays, connecting the rapid progress of commercial multiplexing, digitisation and data acquisition hardware together with a three-dimensional neural interface.

    View details for DOI 10.1126/sciadv.aay2789

    View details for PubMedID 32219158

    View details for PubMedCentralID PMC7083623

  • Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth Nano Letters Rugars, A. E., Lu, H., Dory, C., Sun, S., McQuade, P., Shen, Z., Melosh, N., Vučković, J. 2020; 20 (3): 1614-1619
  • CHIME: CMOS-Hosted in vivo Microelectrodes for Massively Scalable Neuronal Recordings. Frontiers in neuroscience Kollo, M., Racz, R., Hanna, M., Obaid, A., Angle, M. R., Wray, W., Kong, Y., Muller, J., Hierlemann, A., Melosh, N. A., Schaefer, A. T. 2020; 14: 834

    Abstract

    Mammalian brains consist of 10s of millions to 100s of billions of neurons operating at millisecond time scales, of which current recording techniques only capture a tiny fraction. Recording techniques capable of sampling neural activity at high spatiotemporal resolution have been difficult to scale. The most intensively studied mammalian neuronal networks, such as the neocortex, show a layered architecture, where the optimal recording technology samples densely over large areas. However, the need for application-specific designs as well as the mismatch between the three-dimensional architecture of the brain and largely two-dimensional microfabrication techniques profoundly limits both neurophysiological research and neural prosthetics. Here, we discuss a novel strategy for scalable neuronal recording by combining bundles of glass-ensheathed microwires with large-scale amplifier arrays derived from high-density CMOS in vitro MEA systems or high-speed infrared cameras. High signal-to-noise ratio (<25 muV RMS noise floor, SNR up to 25) is achieved due to the high conductivity of core metals in glass-ensheathed microwires allowing for ultrathin metal cores (down to <1 mum) and negligible stray capacitance. Multi-step electrochemical modification of the tip enables ultra-low access impedance with minimal geometric area, which is largely independent of the core diameter. We show that the microwire size can be reduced to virtually eliminate damage to the blood-brain-barrier upon insertion and we demonstrate that microwire arrays can stably record single-unit activity. Combining microwire bundles and CMOS arrays allows for a highly scalable neuronal recording approach, linking the progress in electrical neuronal recordings to the rapid progress in silicon microfabrication. The modular design of the system allows for custom arrangement of recording sites. Our approach of employing bundles of minimally invasive, highly insulated and functionalized microwires to extend a two-dimensional CMOS architecture into the 3rd dimension can be translated to other CMOS arrays, such as electrical stimulation devices.

    View details for DOI 10.3389/fnins.2020.00834

    View details for PubMedID 32848584

  • Site-controlled generation of tin-vacancy centers in diamond via shallow ion implantation and diamond overgrowth Rugar, A. E., Lu, H., Dory, C., Sun, S., McQuade, P. J., Shen, Z., Melosh, N. A., Vuckovic, J., IEEE IEEE. 2020
  • Transfection with Nanostructure Electro-Injection is Minimally Perturbative ADVANCED THERAPEUTICS Tay, A., Melosh, N. 2019; 2 (12)
  • Transfection with nanostructure electro-injection is minimally perturbative. Advanced therapeutics Tay, A., Melosh, N. 2019; 2 (12)

    Abstract

    Transfection is a critical step for gene editing and cell-based therapies. Nanoscale technologies have shown great promise to provide higher transfection efficiency and lower cell perturbation than conventional viral, biochemical and electroporation techniques due to their small size and localized effect. Although this has significant implications for using cells post-transfection, it has not been thoroughly studied. Here, we developed the nano-electro-injection (NEI) platform which makes use of localized electric fields to transiently open pores on cell membrane followed by electrophoretic delivery of DNA into cells. NEI provided two-folds higher net transfection efficiency than biochemicals and electroporation in Jurkat cells. Analysis of cell doubling time, intracellular calcium levels and mRNA expression changes after these gene delivery methods revealed that viruses and electroporation adversely affected cell behavior. Cell doubling times increased by more than 40% using virus and electroporation methods indicative of higher levels of cell stress, unlike NEI which only minimally affected cell division. Finally, electroporation, but not NEI, greatly altered the expression of immune-associated genes related to immune cell activation and trafficking. These results highlight that nanoscale delivery tools can have significant advantages from a cell health perspective for cell-based research and therapeutic applications.

    View details for DOI 10.1002/adtp.201900133

    View details for PubMedID 37448511

    View details for PubMedCentralID PMC10343936

  • Impact of Rigidity on Molecular Self-Assembly. Langmuir : the ACS journal of surfaces and colloids King, E. M., Gebbie, M. A., Melosh, N. A. 2019

    Abstract

    Rigid, cage-like molecules, like diamondoids, show unique self-assembly behavior, such as templating 1-D nanomaterial assembly via pathways that are typically blocked for such bulky substituents. We investigate molecular forces between diamondoids to explore why molecules with high structural rigidity exhibit these novel assembly pathways. The rigid nature of diamondoids significantly lowers configurational entropy, and we hypothesize that this influences molecular interaction forces. To test this concept, we calculated the distance-dependent impact of entropy on assembly using molecular dynamics simulations. To isolate pairwise entropic and enthalpic contributions to assembly, we considered pairs of molecules in a thermal bath, fixed at set intermolecular separations but otherwise allowed to freely move. By comparing diamondoids to linear alkanes, we draw out the impact of rigidity on the entropy and enthalpy of pairwise interactions. We find that linear alkanes actually exhibit stronger van der Waals interactions than diamondoids at contact, because the bulky structure of diamondoids induces larger net atomic separations. Yet, we also find that diamondoids pay lower entropic penalties when assembling into contact pairs. Thus, the cage-like shape of diamondoids introduces an enthalpic penalty at contact, but the penalty is counterbalanced by entropic effects. Investigating the distance dependence of entropic forces provides a mechanism to explore how rigidity influences molecular assembly. Our results show that low entropic penalties paid by diamondoids can explain the effectiveness of diamondoids in templating nanomaterial assembly. Hence, tuning molecular rigidity can be an effective strategy for controlling the assembly of functional materials, such as biomimetic surfaces and nanoscale materials.

    View details for DOI 10.1021/acs.langmuir.9b01824

    View details for PubMedID 31610658

  • Surface Photovoltage-Induced Ultralow Work Function Material for Thermionic Energy Converters ACS ENERGY LETTERS Schindler, P., Riley, D. C., Bargatin, I., Sahasrahuddhe, K., Schwede, J. W., Sun, S., Pianetta, P., Shen, Z., Howe, R. T., Melosh, N. A. 2019; 4 (10): 2436–43

    Abstract

    Low work function materials are essential for efficient thermionic energy converters (TECs), electronics, and electron emission devices. Much effort has been put into finding thermally stable material combinations that exhibit low work functions. Submonolayer coatings of alkali metals have proven to significantly reduce the work function; however, a work function less than 1 eV has not been reached. We report a record-low work function of 0.70 eV by inducing a surface photovoltage (SPV) in an n-type semiconductor with an alkali metal coating. Ultraviolet photoelectron spectroscopy indicates a work function of 1.06 eV for cesium/oxygen-activated GaAs consistent with density functional theory model predictions. By illuminating with a 532 nm laser we induce an additional shift down to 0.70 eV due to the SPV. Further, we apply the SPV to the collector of an experimental TEC and demonstrate an I-V curve shift consistent with the collector work function reduction. This method opens an avenue toward efficient TECs and next-generation electron emission devices.

    View details for DOI 10.1021/acsenergylett.9b01214

    View details for Web of Science ID 000490365500011

    View details for PubMedID 31633034

    View details for PubMedCentralID PMC6792473

  • Nanodiamond Integration with Photonic Devices LASER & PHOTONICS REVIEWS Rodulaski, M., Zhang, J., Tzeng, Y., Lagoudakis, K. G., Ishiwata, H., Dory, C., Fischer, K. A., Kelaita, Y. A., Sun, S., Maurer, P. C., Alassaad, K., Ferro, G., Shen, Z., Melosh, N. A., Chu, S., Vuckovic, J. 2019
  • Micron-gap spacers with ultrahigh thermal resistance and mechanical robustness for direct energy conversion. Microsystems & nanoengineering Nicaise, S. M., Lin, C., Azadi, M., Bozorg-Grayeli, T., Adebayo-Ige, P., Lilley, D. E., Pfitzer, Y., Cha, W., Van Houten, K., Melosh, N. A., Howe, R. T., Schwede, J. W., Bargatin, I. 2019; 5: 31

    Abstract

    In thermionic energy converters, the absolute efficiency can be increased up to 40% if space-charge losses are eliminated by using a sub-10-µm gap between the electrodes. One practical way to achieve such small gaps over large device areas is to use a stiff and thermally insulating spacer between the two electrodes. We report on the design, fabrication and characterization of thin-film alumina-based spacers that provided robust 3-8 μm gaps between planar substrates and had effective thermal conductivities less than those of aerogels. The spacers were fabricated on silicon molds and, after release, could be manually transferred onto any substrate. In large-scale compression testing, they sustained compressive stresses of 0.4-4 MPa without fracture. Experimentally, the thermal conductance was 10-30 mWcm-2K-1 and, surprisingly, independent of film thickness (100-800 nm) and spacer height. To explain this independence, we developed a model that includes the pressure-dependent conductance of locally distributed asperities and sparse contact points throughout the spacer structure, indicating that only 0.1-0.5% of the spacer-electrode interface was conducting heat. Our spacers show remarkable functionality over multiple length scales, providing insulating micrometer gaps over centimeter areas using nanoscale films. These innovations can be applied to other technologies requiring high thermal resistance in small spaces, such as thermophotovoltaic converters, insulation for spacecraft and cryogenic devices.

    View details for DOI 10.1038/s41378-019-0071-4

    View details for PubMedID 31636923

    View details for PubMedCentralID PMC6799816

  • Micron-gap spacers with ultrahigh thermal resistance and mechanical robustness for direct energy conversion MICROSYSTEMS & NANOENGINEERING Nicaise, S. M., Lin, C., Azadi, M., Bozorg-Grayeli, T., Adebayo-Ige, P., Lilley, D. E., Pfitzer, Y., Cha, W., Van Houten, K., Melosh, N. A., Howe, R. T., Schwede, J. W., Bargatin, I. 2019; 5
  • Sparking to life. Nature materials Melosh, N. A. 2019

    View details for DOI 10.1038/s41563-019-0510-5

    View details for PubMedID 31562493

  • Nanostructured Materials for Intracellular Cargo Delivery. Accounts of chemical research Tay, A. n., Melosh, N. n. 2019

    Abstract

    Intracellular cargo delivery is an essential step in many biomedical applications including gene editing and biologics therapy. Examples of cargo include nucleic acids (RNA and DNA), proteins, small biomolecules, and drugs, which can vary substantially in terms of their sizes, charges, solubility, and stability. Viruses have been used traditionally to deliver nucleic acids into cells, but the method suffers from limitations such as small cargo size, safety concerns, and viral genome integration into host cells, all of which complicate therapeutic applications. Commercially available techniques using biochemicals and bulk electroporation are, in general, poorly compatible with primary cells such as human induced pluripotent stem cells and immune cells, which are increasingly important candidates for adoptive cell therapy. Nanostructures, with dimensions ranging from tens of nanometers to a few micrometers, may play a critical role in overcoming cellular manipulation and delivery challenges and provide a powerful alternative to conventional techniques. A critical feature that differentiates nanostructures from viral, biochemical, and bulk electroporation techniques is that they interface with cells at a scale measuring ten to hundreds of nanometers in size. This highly local interaction enables application of stronger and more direct stimuli such as mechanical force, heat, or electric fields than would be possible in a bulk treatment. Compared to popular viral, biochemical, and bulk electroporation methods, nanostructures were found to minimally perturb cells with cells remaining in good health during postdelivery culture. These advantages have enabled nanostructures such as nanowires and nanotubes to successfully interface with a wide variety of cells, including primary immune cells and cardiomyocytes, for in vitro and in vivo applications. This Account is focused on using nanostructures for cargo delivery into biological cells. In this Account, we will first outline the historical developments using nanostructures for interfacing with cells. We will highlight how mechanistic understanding of nano-bio interactions has evolved over the last decade and how this improved knowledge has motivated coupling of electric and magnetic fields to nanostructures to improve delivery outcomes. There will also be an in-depth discussion on the merits of nanostructures in comparison to conventional methods using viruses, biochemicals, and bulk electroporation. Finally, motivated by our observations on the lack of consistency in reporting key metrics such as efficiency in literature, we suggest a set of metrics for documenting experimental results with the aim to promote standardization in reporting and ease in comparing. We suggest the use of more sophisticated tools such as RNA transcriptomics for thorough assessment of cell perturbation attributed to intracellular delivery. We hope that this Account can effectively capture the progress of nanostructure-mediated cargo delivery and encourage new innovations.

    View details for DOI 10.1021/acs.accounts.9b00272

    View details for PubMedID 31465200

  • Frequency Tunable Single-Photon Emission From a Single Atomic Defect in a Solid Sun, S., Zhang, J., Fischer, K. A., Burek, M. J., Dory, C., Lagoudakis, K. G., Tzeng, Y., Radulaski, M., Kelaita, Y., Safavi-Naeini, A., Shen, Z., Melosh, N. A., Chu, S., Loncar, M., Vuckovic, J., IEEE IEEE. 2019
  • Cavity-Enhanced Raman Emission from a Single Color Center in a Solid. Physical review letters Sun, S., Zhang, J. L., Fischer, K. A., Burek, M. J., Dory, C., Lagoudakis, K. G., Tzeng, Y., Radulaski, M., Kelaita, Y., Safavi-Naeini, A., Shen, Z., Melosh, N. A., Chu, S., Loncar, M., Vuckovic, J. 2018; 121 (8): 083601

    Abstract

    We demonstrate cavity-enhanced Raman emission from a single atomic defect in a solid. Our platform is a single silicon-vacancy center in diamond coupled with a monolithic diamond photonic crystal cavity. The cavity enables an unprecedented frequency tuning range of the Raman emission (100GHz) that significantly exceeds the spectral inhomogeneity of silicon-vacancy centers in diamond nanostructures. We also show that the cavity selectively suppresses the phonon-induced spontaneous emission that degrades the efficiency of Raman photon generation. Our results pave the way towards photon-mediated many-body interactions between solid-state quantum emitters in a nanophotonic platform.

    View details for PubMedID 30192607

  • An Ultrastrong Double-Layer Nanodiamond Interface for Stable Lithium Metal Anodes JOULE Liu, Y., Tzeng, Y., Lin, D., Pei, A., Lu, H., Melosh, N. A., Shen, Z., Chu, S., Cui, Y. 2018; 2 (8): 1595–1609
  • Experimental measurement of the diamond nucleation landscape reveals classical and nonclassical features. Proceedings of the National Academy of Sciences of the United States of America Gebbie, M. A., Ishiwata, H., McQuade, P. J., Petrak, V., Taylor, A., Freiwald, C., Dahl, J. E., Carlson, R. M., Fokin, A. A., Schreiner, P. R., Shen, Z., Nesladek, M., Melosh, N. A. 2018

    Abstract

    Nucleation is a core scientific concept that describes the formation of new phases and materials. While classical nucleation theory is applied across wide-ranging fields, nucleation energy landscapes have never been directly measured at the atomic level, and experiments suggest that nucleation rates often greatly exceed the predictions of classical nucleation theory. Multistep nucleation via metastable states could explain unexpectedly rapid nucleation in many contexts, yet experimental energy landscapes supporting such mechanisms are scarce, particularly at nanoscale dimensions. In this work, we measured the nucleation energy landscape of diamond during chemical vapor deposition, using a series of diamondoid molecules as atomically defined protonuclei. We find that 26-carbon atom clusters, which do not contain a single bulk atom, are postcritical nuclei and measure the nucleation barrier to be more than four orders of magnitude smaller than prior bulk estimations. These data support both classical and nonclassical concepts for multistep nucleation and growth during the gas-phase synthesis of diamond and other semiconductors. More broadly, these measurements provide experimental evidence that agrees with recent conceptual proposals of multistep nucleation pathways with metastable molecular precursors in diverse processes, ranging from cloud formation to protein crystallization, and nanoparticle synthesis.

    View details for PubMedID 30068609

  • Electronic and Ionic Materials for Neurointerfaces ADVANCED FUNCTIONAL MATERIALS Ferro, M. D., Melosh, N. A. 2018; 28 (12)
  • Sterically controlled mechanochemistry under hydrostatic pressure NATURE Yan, H., Yang, F., Pan, D., Lin, Y., Hohman, J., Solis-Ibarra, D., Li, F., Dahl, J. P., Carlson, R. K., Tkachenko, B. A., Fokin, A. A., Schreiner, P. R., Galli, G., Mao, W. L., Shen, Z., Melosh, N. A. 2018; 554 (7693): 505-+

    Abstract

    Mechanical stimuli can modify the energy landscape of chemical reactions and enable reaction pathways, offering a synthetic strategy that complements conventional chemistry. These mechanochemical mechanisms have been studied extensively in one-dimensional polymers under tensile stress using ring-opening and reorganization, polymer unzipping and disulfide reduction as model reactions. In these systems, the pulling force stretches chemical bonds, initiating the reaction. Additionally, it has been shown that forces orthogonal to the chemical bonds can alter the rate of bond dissociation. However, these bond activation mechanisms have not been possible under isotropic, compressive stress (that is, hydrostatic pressure). Here we show that mechanochemistry through isotropic compression is possible by molecularly engineering structures that can translate macroscopic isotropic stress into molecular-level anisotropic strain. We engineer molecules with mechanically heterogeneous components-a compressible ('soft') mechanophore and incompressible ('hard') ligands. In these 'molecular anvils', isotropic stress leads to relative motions of the rigid ligands, anisotropically deforming the compressible mechanophore and activating bonds. Conversely, rigid ligands in steric contact impede relative motion, blocking reactivity. We combine experiments and computations to demonstrate hydrostatic-pressure-driven redox reactions in metal-organic chalcogenides that incorporate molecular elements that have heterogeneous compressibility, in which bending of bond angles or shearing of adjacent chains activates the metal-chalcogen bonds, leading to the formation of the elemental metal. These results reveal an unexplored reaction mechanism and suggest possible strategies for high-specificity mechanosynthesis.

    View details for PubMedID 29469090

  • Monochromatic Photocathodes from Graphene-Stabilized Diamondoids NANO LETTERS Yan, H., Narasimha, K. T., Denlinger, J., Li, F., Mo, S., Hohman, J., Dahl, J. P., Carlson, R. K., Tkachenko, B. A., Fokin, A. A., Schreiner, P. R., Hussain, Z., Shen, Z., Melosh, N. A. 2018; 18 (2): 1099–1103

    Abstract

    The monochromatic photoemission from diamondoid monolayers provides a new strategy to create electron sources with low energy dispersion and enables compact electron guns with high brightness and low beam emittance for aberration-free imaging, lithography, and accelerators. However, these potential applications are hindered by degradation of diamondoid monolayers under photon irradiation and electron bombardment. Here, we report a graphene-protected diamondoid monolayer photocathode with 4-fold enhancement of stability compared to the bare diamondoid counterpart. The single-layer graphene overcoating preserves the monochromaticity of the photoelectrons, showing 12.5 meV ful width at half-maximum distribution of kinetic energy. Importantly, the graphene coating effectively suppresses desorption of the diamondoid monolayer, enhancing its thermal stability by at least 100 K. Furthermore, by comparing the decay rate at different photon energies, we identify electron bombardment as the principle decay pathway for diamondoids under graphene protection. This provides a generic approach for stabilizing volatile species on photocathode surfaces, which could greatly improve performance of electron emitters.

    View details for PubMedID 29286670

  • Strongly Cavity-Enhanced Spontaneous Emission from Silicon-Vacancy Centers in Diamond NANO LETTERS Zhang, J., Sun, S., Burek, M. J., Dory, C., Tzeng, Y., Fischer, K. A., Kelaita, Y., Lardakis, K. G., Radulaski, M., Shen, Z., Melosh, N. A., Chu, S., Loncar, M., Vuckovic, J. 2018; 18 (2): 1360–65

    Abstract

    Quantum emitters are an integral component for a broad range of quantum technologies, including quantum communication, quantum repeaters, and linear optical quantum computation. Solid-state color centers are promising candidates for scalable quantum optics due to their long coherence time and small inhomogeneous broadening. However, once excited, color centers often decay through phonon-assisted processes, limiting the efficiency of single-photon generation and photon-mediated entanglement generation. Herein, we demonstrate strong enhancement of spontaneous emission rate of a single silicon-vacancy center in diamond embedded within a monolithic optical cavity, reaching a regime in which the excited-state lifetime is dominated by spontaneous emission into the cavity mode. We observe 10-fold lifetime reduction and 42-fold enhancement in emission intensity when the cavity is tuned into resonance with the optical transition of a single silicon-vacancy center, corresponding to 90% of the excited-state energy decay occurring through spontaneous emission into the cavity mode. We also demonstrate the largest coupling strength (g/2π = 4.9 ± 0.3 GHz) and cooperativity (C = 1.4) to date for color-center-based cavity quantum electrodynamics systems, bringing the system closer to the strong coupling regime.

    View details for DOI 10.1021/acs.nanolett.7b05075

    View details for Web of Science ID 000425559700102

    View details for PubMedID 29377701

  • Functionalisation of Detonation Nanodiamond for Monodispersed, Soluble DNA-Nanodiamond Conjugates Using Mixed Silane Bead-Assisted Sonication Disintegration SCIENTIFIC REPORTS Edgington, R., Spillane, K. M., Papageorgiou, G., Wray, W., Ishiwata, H., Labarca, M., Leal-Ortiz, S., Reid, G., Webb, M., Foord, J., Melosh, N., Schaefer, A. T. 2018; 8: 728

    Abstract

    Nanodiamonds have many attractive properties that make them suitable for a range of biological applications, but their practical use has been limited because nanodiamond conjugates tend to aggregate in solution during or after functionalisation. Here we demonstrate the production of DNA-detonation nanodiamond (DNA-DND) conjugates with high dispersion and solubility using an ultrasonic, mixed-silanization chemistry protocol based on the in situ Bead-Assisted Sonication Disintegration (BASD) silanization method. We use two silanes to achieve these properties: (1) 3-(trihydroxysilyl)propyl methylphosphonate (THPMP); a negatively charged silane that imparts high zeta potential and solubility in solution; and (2) (3-aminopropyl)triethoxysilane (APTES); a commonly used functional silane that contributes an amino group for subsequent bioconjugation. We target these amino groups for covalent conjugation to thiolated, single-stranded DNA oligomers using the heterobifunctional crosslinker sulfosuccinimidyl 4-(N-maleimidomethyl)cyclohexane-1-carboxylate (Sulfo-SMCC). The resulting DNA-DND conjugates are the smallest reported to date, as determined by Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM). The functionalisation method we describe is versatile and can be used to produce a wide variety of soluble DND-biomolecule conjugates.

    View details for PubMedID 29335424

  • Roadmap on semiconductor-cell biointerfaces. Physical biology Tian, B., Xu, S., Rogers, J. A., Cestellos-Blanco, S., Yang, P., Carvalho-de-Souza, J. L., Bezanilla, F., Liu, J., Bao, Z., Hjort, M., Cao, Y., Melosh, N., Lanzani, G., Benfenati, F., Galli, G., Gygi, F., Kautz, R., Gorodetsky, A. A., Kim, S. S., Lu, T. K., Anikeeva, P., Cifra, M., Krivosudsky, O., Havelka, D., Jiang, Y. 2018; 15 (3): 031002

    Abstract

    This roadmap outlines the role semiconductor-based materials play in understanding the complex biophysical dynamics at multiple length scales, as well as the design and implementation of next-generation electronic, optoelectronic, and mechanical devices for biointerfaces. The roadmap emphasizes the advantages of semiconductor building blocks in interfacing, monitoring, and manipulating the activity of biological components, and discusses the possibility of using active semiconductor-cell interfaces for discovering new signaling processes in the biological world.

    View details for DOI 10.1088/1478-3975/aa9f34

    View details for PubMedID 29205173

  • Cellular Differentiation of Human Monocytes Is Regulated by Time-Dependent Interleukin-4 Signaling and the Transcriptional Regulator NCOR2 IMMUNITY Sander, J., Schmidt, S. V., Cirovic, B., McGovern, N., Papantonopoulou, O., Hardt, A., Aschenbrenner, A. C., Kreer, C., Quast, T., Xu, A. M., Schmidleithner, L. M., Theis, H., Lan Do Thi Huong, Bin Sumatoh, H., Lauterbach, M. R., Schulte-Schrepping, J., Guenther, P., Xue, J., Bassler, K., Ulas, T., Klee, K., Katzmarski, N., Herresthal, S., Krebs, W., Martin, B., Latz, E., Haendler, K., Kraut, M., Kolanus, W., Beyer, M., Falk, C. S., Wiegmann, B., Burgdorf, S., Melosh, N. A., Newell, E. W., Ginhoux, F., Schlitzer, A., Schultze, J. L. 2017; 47 (6): 1051-+

    Abstract

    Human in vitro generated monocyte-derived dendritic cells (moDCs) and macrophages are used clinically, e.g., to induce immunity against cancer. However, their physiological counterparts, ontogeny, transcriptional regulation, and heterogeneity remains largely unknown, hampering their clinical use. High-dimensional techniques were used to elucidate transcriptional, phenotypic, and functional differences between human in vivo and in vitro generated mononuclear phagocytes to facilitate their full potential in the clinic. We demonstrate that monocytes differentiated by macrophage colony-stimulating factor (M-CSF) or granulocyte macrophage colony-stimulating factor (GM-CSF) resembled in vivo inflammatory macrophages, while moDCs resembled in vivo inflammatory DCs. Moreover, differentiated monocytes presented with profound transcriptomic, phenotypic, and functional differences. Monocytes integrated GM-CSF and IL-4 stimulation combinatorically and temporally, resulting in a mode- and time-dependent differentiation relying on NCOR2. Finally, moDCs are phenotypically heterogeneous and therefore necessitate the use of high-dimensional phenotyping to open new possibilities for better clinical tailoring of these cellular therapies.

    View details for PubMedID 29262348

    View details for PubMedCentralID PMC5772172

  • Self-Assembly of Mesoscale Artificial Clathrin Mimics ACS NANO Kong, Y., Hanna, M. S., Zhuo, D., Chang, K. G., Bozorg-Grayeli, T., Melosh, N. A. 2017; 11 (10): 9889–97

    Abstract

    Fluidic control and sampling in complex environments is an important process in biotechnology, materials synthesis, and microfluidics. An elegant solution to this problem has evolved in nature through cellular endocytosis, where the dynamic recruitment, self-assembly, and spherical budding of clathrin proteins allows cells to sample their external environment. Yet despite the importance and utility of endocytosis, artificial systems which can replicate this dynamic behavior have not been developed. Guided by clathrin's unusual structure, we created simplified metallic microparticles that capture the three-legged shape, particle curvature, and interfacial attachment characteristics of clathrin. These artificial clathrin mimics successfully recreate biomimetic analogues of clathrin's recruitment, assembly, and budding, ultimately forming extended networks at fluid interfaces and invaginating immiscible phases into spheres under external fields. Particle curvature was discovered to be a critical structural motif, greatly limiting irreversible aggregation and inducing the legs' selective tip-to-tip attraction. This architecture provides a template for a class of active self-assembly units to drive structural and dimensional transformations of liquid-liquid interfaces and microscale fluidic sampling.

    View details for PubMedID 28921943

  • Quantifying and Elucidating Thermally Enhanced Minority Carrier Diffusion Length Using Radius-Controlled Rutile Nanowires NANO LETTERS Zhang, L., Sun, L., Guan, Z., Lee, S., Li, Y., Deng, H. D., Li, Y., Ahlborg, N. L., Boloor, M., Melosh, N. A., Chueh, W. C. 2017; 17 (9): 5264–72

    Abstract

    The minority carrier diffusion length (LD) is a crucial property that determines the performance of light absorbers in photoelectrochemical (PEC) cells. Many transition-metal oxides are stable photoanodes for solar water splitting but exhibit a small to moderate LD, ranging from a few nanometers (such as α-Fe2O3 and TiO2) to a few tens of nanometers (such as BiVO4). Under operating conditions, the temperature of PEC cells can deviate substantially from ambient, yet the temperature dependence of LD has not been quantified. In this work, we show that measuring the photocurrent as a function of both temperature and absorber dimensions provides a quantitative method for evaluating the temperature-dependent minority carrier transport. By measuring photocurrents of nonstoichiometric rutile TiO2-x nanowires as a function of wire radius (19-75 nm) and temperature (10-70 °C), we extract the minority carrier diffusion length along with its activation energy. The minority carrier diffusion length in TiO2-x increases from 5 nm at 25 °C to 10 nm at 70 °C, implying that enhanced carrier mobility outweighs the increase in the recombination rate with temperature. Additionally, by comparing the temperature-dependent photocurrent in BiVO4, TiO2, and α-Fe2O3, we conclude that the ratio of the minority carrier diffusion length to the depletion layer width determines the extent of temperature enhancement, and reconcile the widespread temperature coefficients, which ranged from 0.6 to 1.7% K-1. This insight provides a general design rule to select light absorbers for large thermally activated photocurrents and to predict PEC cell characteristics at a range of temperatures encountered during realistic device operation.

    View details for PubMedID 28817772

  • Electron-emission materials: Advances, applications, and models MRS BULLETIN Trucchi, D. M., Melosh, N. A. 2017; 42 (7): 488–92
  • Nondestructive nanostraw intracellular sampling for longitudinal cell monitoring PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA Cao, Y., Hjort, M., Chen, H., Birey, F., Leal-Ortiz, S. A., Han, C. M., Santiago, J. G., Pasca, S. P., Wu, J. C., Melosh, N. A. 2017; 114 (10): E1866–E1874
  • Temperature-dependent optical properties of titanium nitride APPLIED PHYSICS LETTERS Briggs, J. A., Naik, G. V., Zhao, Y., Petach, T. A., Sahasrabuddhe, K., Goldhaber-Gordon, D., Melosh, N. A., Dionne, J. A. 2017; 110 (10)

    View details for DOI 10.1063/1.4977840

    View details for Web of Science ID 000397871800011

  • Hybrid metal-organic chalcogenide nanowires with electrically conductive inorganic core through diamondoid-directed assembly. Nature materials Yan, H., Hohman, J. N., Li, F. H., Jia, C., Solis-Ibarra, D., Wu, B., Dahl, J. E., Carlson, R. M., Tkachenko, B. A., Fokin, A. A., Schreiner, P. R., Vailionis, A., Kim, T. R., Devereaux, T. P., Shen, Z., Melosh, N. A. 2017; 16 (3): 349-355

    Abstract

    Controlling inorganic structure and dimensionality through structure-directing agents is a versatile approach for new materials synthesis that has been used extensively for metal-organic frameworks and coordination polymers. However, the lack of 'solid' inorganic cores requires charge transport through single-atom chains and/or organic groups, limiting their electronic properties. Here, we report that strongly interacting diamondoid structure-directing agents guide the growth of hybrid metal-organic chalcogenide nanowires with solid inorganic cores having three-atom cross-sections, representing the smallest possible nanowires. The strong van der Waals attraction between diamondoids overcomes steric repulsion leading to a cis configuration at the active growth front, enabling face-on addition of precursors for nanowire elongation. These nanowires have band-like electronic properties, low effective carrier masses and three orders-of-magnitude conductivity modulation by hole doping. This discovery highlights a previously unexplored regime of structure-directing agents compared with traditional surfactant, block copolymer or metal-organic framework linkers.

    View details for DOI 10.1038/nmat4823

    View details for PubMedID 28024157

  • Nondestructive nanostraw intracellular sampling for longitudinal cell monitoring. Proceedings of the National Academy of Sciences of the United States of America Cao, Y., Hjort, M., Chen, H., Birey, F., Leal-Ortiz, S. A., Han, C. M., Santiago, J. G., Pasca, S. P., Wu, J. C., Melosh, N. A. 2017

    Abstract

    Here, we report a method for time-resolved, longitudinal extraction and quantitative measurement of intracellular proteins and mRNA from a variety of cell types. Cytosolic contents were repeatedly sampled from the same cell or population of cells for more than 5 d through a cell-culture substrate, incorporating hollow 150-nm-diameter nanostraws (NS) within a defined sampling region. Once extracted, the cellular contents were analyzed with conventional methods, including fluorescence, enzymatic assays (ELISA), and quantitative real-time PCR. This process was nondestructive with >95% cell viability after sampling, enabling long-term analysis. It is important to note that the measured quantities from the cell extract were found to constitute a statistically significant representation of the actual contents within the cells. Of 48 mRNA sequences analyzed from a population of cardiomyocytes derived from human induced pluripotent stem cells (hiPSC-CMs), 41 were accurately quantified. The NS platform samples from a select subpopulation of cells within a larger culture, allowing native cell-to-cell contact and communication even during vigorous activity such as cardiomyocyte beating. This platform was applied both to cell lines and to primary cells, including CHO cells, hiPSC-CMs, and human astrocytes derived in 3D cortical spheroids. By tracking the same cell or group of cells over time, this method offers an avenue to understand dynamic cell behavior, including processes such as induced pluripotency and differentiation.

    View details for DOI 10.1073/pnas.1615375114

    View details for PubMedID 28223521

  • Vertical-Substrate MPCVD Epitaxial Nanodiamond Growth. Nano letters Tzeng, Y., Zhang, J. L., Lu, H., Ishiwata, H., Dahl, J., Carlson, R. M., Yan, H., Schreiner, P. R., Vuckovic, J., Shen, Z., Melosh, N., Chu, S. 2017

    Abstract

    Color center-containing nanodiamonds have many applications in quantum technologies and biology. Diamondoids, molecular-sized diamonds have been used as seeds in chemical vapor deposition (CVD) growth. However, optimizing growth conditions to produce high crystal quality nanodiamonds with color centers requires varying growth conditions that often leads to ad-hoc and time-consuming, one-at-a-time testing of reaction conditions. In order to rapidly explore parameter space, we developed a microwave plasma CVD technique using a vertical, rather than horizontally oriented stage-substrate geometry. With this configuration, temperature, plasma density, and atomic hydrogen density vary continuously along the vertical axis of the substrate. This variation allowed rapid identification of growth parameters that yield single crystal diamonds down to 10 nm in size and 75 nm diameter optically active center silicon-vacancy (Si-V) nanoparticles. Furthermore, this method may provide a means of incorporating a wide variety of dopants in nanodiamonds without ion irradiation damage.

    View details for DOI 10.1021/acs.nanolett.6b04543

    View details for PubMedID 28182433

  • Back-gated graphene anode for more efficient thermionic energy converters NANO ENERGY Yuan, H., Riley, D. C., Shen, Z., Pianetta, P. A., Melosh, N. A., Howe, R. T. 2017; 32: 67-72
  • Direct Intracellular Delivery of Cell Impermeable Probes of Protein Glycosylation Using Nanostraws. Chembiochem Xu, A. M., Wang, D. S., Shieh, P., Cao, Y., Melosh, N. 2017

    Abstract

    Bioorthogonal chemistry is an effective tool for elucidating metabolic pathways and measuring cellular activity, yet its use is currently limited by the difficulty of getting probes past the cell membrane and into the cytoplasm, especially if more complex probes are desired. Here we present a simple and minimally perturbative technique to deliver functional probes of glycosylation into cells by using a nanostructured "nanostraw" delivery system. Nanostraws provide direct intracellular access to cells through fluid conduits that remain small enough to minimize cell perturbation. First, we demonstrate that our platform can deliver an unmodified azidosugar, N-azidoacetylmannosamine, into cells with similar effectiveness to a chemical modification strategy (peracetylation). We then show that the nanostraw platform enables direct delivery of an azidosugar modified with a charged uridine diphosphate group (UDP) that prevents intracellular penetration, thereby bypassing multiple enzymatic processing steps. By effectively removing the requirement for cell permeability from the probe, the nanostraws expand the toolbox of bioorthogonal probes that can be used to study biological processes on a single, easy-to-use platform.

    View details for DOI 10.1002/cbic.201600689

    View details for PubMedID 28130882

  • Complete Coherent Control of Silicon-Vacancies in Diamond Nanopillars Containing Single Defect Centers Zhang, J., Lagoudakis, K. G., Tzeng, Y., Dory, C., Radulaski, M., Kelaita, Y., Fischer, K. A., Shen, Z., Melosh, N. A., Chu, S., Vuckovic, J., IEEE IEEE. 2017
  • Complete coherent control of silicon vacancies in diamond nanopillars containing single defect centers OPTICA Zhang, J. L., Lagoudakis, K. G., Tzeng, Y., Dory, C., Radulaski, M., Kelaita, Y., Fischer, K. A., Sun, S., Shen, Z., Melosh, N., Chu, S., Vuckovic, J. 2017; 4 (11): 1317-1321

    View details for DOI 10.1364/OPTICA.4.001317

  • Electronic devices: Nanoparticles make salty circuits. Nature nanotechnology Yan, H., Melosh, N. 2016; 11 (7): 579-580

    View details for DOI 10.1038/nnano.2016.46

    View details for PubMedID 26974955

  • Fabrication of Sealed Nanostraw Microdevices for Oral Drug Delivery ACS NANO Fox, C. B., Cao, Y., Nemeth, C. L., Chirra, H. D., Chevalier, R. W., Xu, A. M., Melosh, N. A., Desai, T. A. 2016; 10 (6): 5873-5881

    Abstract

    The oral route is preferred for systemic drug administration and provides direct access to diseased tissue of the gastrointestinal (GI) tract. However, many drugs have poor absorption upon oral administration due to damaging enzymatic and pH conditions, mucus and cellular permeation barriers, and limited time for drug dissolution. To overcome these limitations and enhance oral drug absorption, micron-scale devices with planar, asymmetric geometries, termed microdevices, have been designed to adhere to the lining of the GI tract and release drug at high concentrations directly toward GI epithelium. Here we seal microdevices with nanostraw membranes-porous nanostructured biomolecule delivery substrates-to enhance the properties of these devices. We demonstrate that the nanostraws facilitate facile drug loading and tunable drug release, limit the influx of external molecules into the sealed drug reservoir, and increase the adhesion of devices to epithelial tissue. These findings highlight the potential of nanostraw microdevices to enhance the oral absorption of a wide range of therapeutics by binding to the lining of the GI tract, providing prolonged and proximal drug release, and reducing the exposure of their payload to drug-degrading biomolecules.

    View details for DOI 10.1021/acsnano.6b00809

    View details for Web of Science ID 000378973700030

    View details for PubMedID 27268699

  • Ultralow effective work function surfaces using diamondoid monolayers. Nature nanotechnology Narasimha, K. T., Ge, C., Fabbri, J. D., Clay, W., Tkachenko, B. A., Fokin, A. A., Schreiner, P. R., Dahl, J. E., Carlson, R. M., Shen, Z. X., Melosh, N. A. 2016; 11 (3): 267-272

    Abstract

    Electron emission is critical for a host of modern fabrication and analysis applications including mass spectrometry, electron imaging and nanopatterning. Here, we report that monolayers of diamondoids effectively confer dramatically enhanced field emission properties to metal surfaces. We attribute the improved emission to a significant reduction of the work function rather than a geometric enhancement. This effect depends on the particular diamondoid isomer, with [121]tetramantane-2-thiol reducing gold's work function from ∼5.1 eV to 1.60 ± 0.3 eV, corresponding to an increase in current by a factor of over 13,000. This reduction in work function is the largest reported for any organic species and also the largest for any air-stable compound. This effect was not observed for sp(3)-hybridized alkanes, nor for smaller diamondoid molecules. The magnitude of the enhancement, molecule specificity and elimination of gold metal rearrangement precludes geometric factors as the dominant contribution. Instead, we attribute this effect to the stable radical cation of diamondoids. Our computed enhancement due to a positively charged radical cation was in agreement with the measured work functions to within ±0.3 eV, suggesting a new paradigm for low-work-function coatings based on the design of nanoparticles with stable radical cations.

    View details for DOI 10.1038/nnano.2015.277

    View details for PubMedID 26641529

  • Hybrid Group IV Nanophotonic Structures Incorporating Diamond Silicon-Vacancy Color Centers. Nano letters Zhang, J. L., Ishiwata, H., Babinec, T. M., Radulaski, M., Müller, K., Lagoudakis, K. G., Dory, C., Dahl, J., Edgington, R., Soulière, V., Ferro, G., Fokin, A. A., Schreiner, P. R., Shen, Z. X., Melosh, N. A., Vučković, J. 2016; 16 (1): 212-7

    Abstract

    We demonstrate a new approach for engineering group IV semiconductor-based quantum photonic structures containing negatively charged silicon-vacancy (SiV(-)) color centers in diamond as quantum emitters. Hybrid diamond-SiC structures are realized by combining the growth of nano- and microdiamonds on silicon carbide (3C or 4H polytype) substrates, with the subsequent use of these diamond crystals as a hard mask for pattern transfer. SiV(-) color centers are incorporated in diamond during its synthesis from molecular diamond seeds (diamondoids), with no need for ion-implantation or annealing. We show that the same growth technique can be used to grow a diamond layer controllably doped with SiV(-) on top of a high purity bulk diamond, in which we subsequently fabricate nanopillar arrays containing high quality SiV(-) centers. Scanning confocal photoluminescence measurements reveal optically active SiV(-) lines both at room temperature and low temperature (5 K) from all fabricated structures, and, in particular, very narrow line widths and small inhomogeneous broadening of SiV(-) lines from all-diamond nanopillar arrays, which is a critical requirement for quantum computation. At low temperatures (5 K) we observe in these structures the signature typical of SiV(-) centers in bulk diamond, consistent with a double lambda. These results indicate that high quality color centers can be incorporated into nanophotonic structures synthetically with properties equivalent to those in bulk diamond, thereby opening opportunities for applications in classical and quantum information processing.

    View details for DOI 10.1021/acs.nanolett.5b03515

    View details for PubMedID 26695059

  • Hybrid Group IV Nanophotonic Structures Incorporating Diamond Silicon-Vacancy Color Centers NANO LETTERS Zhang, J. L., Ishiwata, H., Babinec, T. M., Radulaski, M., Mueller, K., Lagoudakis, K. G., Dory, C., Dahl, J., Edgington, R., Souliere, V., Ferro, G., Fokin, A. A., Schreiner, P. R., Shen, Z., Melosh, N. A., Vuckovic, J. 2016; 16 (1): 212-217

    Abstract

    We demonstrate a new approach for engineering group IV semiconductor-based quantum photonic structures containing negatively charged silicon-vacancy (SiV(-)) color centers in diamond as quantum emitters. Hybrid diamond-SiC structures are realized by combining the growth of nano- and microdiamonds on silicon carbide (3C or 4H polytype) substrates, with the subsequent use of these diamond crystals as a hard mask for pattern transfer. SiV(-) color centers are incorporated in diamond during its synthesis from molecular diamond seeds (diamondoids), with no need for ion-implantation or annealing. We show that the same growth technique can be used to grow a diamond layer controllably doped with SiV(-) on top of a high purity bulk diamond, in which we subsequently fabricate nanopillar arrays containing high quality SiV(-) centers. Scanning confocal photoluminescence measurements reveal optically active SiV(-) lines both at room temperature and low temperature (5 K) from all fabricated structures, and, in particular, very narrow line widths and small inhomogeneous broadening of SiV(-) lines from all-diamond nanopillar arrays, which is a critical requirement for quantum computation. At low temperatures (5 K) we observe in these structures the signature typical of SiV(-) centers in bulk diamond, consistent with a double lambda. These results indicate that high quality color centers can be incorporated into nanophotonic structures synthetically with properties equivalent to those in bulk diamond, thereby opening opportunities for applications in classical and quantum information processing.

    View details for DOI 10.1021/acs.nanolett.5b03515

    View details for Web of Science ID 000368322700034

  • Low Strain Silicon-Vacancy Color Centers in Diamond Nanopillar Arrays Zhang, J., Ishiwata, H., Babinec, T. M., Radulaski, M., Muller, K., Lagoudakis, K. G., Dory, C., Shen, Z., Melosh, N. A., Vuckovic, J., IEEE IEEE. 2016
  • Emitter-Cavity Coupling in Hybrid Silicon Carbide-Nanodiamond Microdisk Resonators Radulaski, M., Tzeng, Y., Zhang, J., Ishiwata, H., Lagoudakis, K. G., Souliere, V., Ferro, G., Shen, Z., Melosh, N. A., Chu, S., Vuckovic, J., IEEE IEEE. 2016
  • Temporally resolved direct delivery of second messengers into cells using nanostraws LAB ON A CHIP Xu, A. M., Kim, S. A., Wang, D. S., Aalipour, A., Melosh, N. A. 2016; 16 (13): 2434-2439

    Abstract

    Second messengers are biomolecules with the critical role of conveying information to intracellular targets. They are typically membrane-impermeable and only enter cells through tightly regulated transporters. Current methods for manipulating second messengers in cells require preparation of modified cell lines or significant disruptions in cell function, especially at the cell membrane. Here we demonstrate that 100 nm diameter 'nanostraws' penetrate the cell membrane to directly modulate second messenger concentrations within cells. Nanostraws are hollow vertical nanowires that provide a fluidic conduit into cells to allow time-resolved delivery of the signaling ion Ca(2+) without chemical permeabilization or genetic modification, minimizing cell perturbation. By integrating the nanostraw platform into a microfluidic device, we demonstrate coordinated delivery of Ca(2+) ions into hundreds of cells at the time scale of several seconds with the ability to deliver complex signal patterns, such as oscillations over time. The diffusive nature of nanostraw delivery gives the platform unique versatility, opening the possibility for time-resolved delivery of any freely diffusing molecules.

    View details for DOI 10.1039/c6lc00463f

    View details for Web of Science ID 000378941700008

    View details for PubMedID 27292263

  • Significantly enhanced photocurrent for water oxidation in monolithic Mo:BiVO4/SnO2/Si by thermally increasing the minority carrier diffusion length ENERGY & ENVIRONMENTAL SCIENCE Zhang, L., Ye, X., Boloor, M., Poletayev, A., Melosh, N. A., Chueh, W. C. 2016; 9 (6): 2044-2052

    View details for DOI 10.1039/c6ee00036c

    View details for Web of Science ID 000378244200013

  • Determining the Time Window for Dynamic Nanowire Cell Penetration Processes ACS NANO Xie, X., Aalipour, A., Gupta, S. V., Melosh, N. A. 2015; 9 (12): 11667-11677

    Abstract

    Nanowire (NW) arrays offer opportunities for parallel, nondestructive intracellular access for biomolecule delivery, intracellular recording, and sensing. Spontaneous cell membrane penetration by vertical nanowires is essential for these applications, yet the time- and geometry-dependent penetration process is still poorly understood. In this work, the dynamic NW-cell interface during cell spreading was examined through experimental cell penetration measurements combined with two mechanical models based on substrate adhesion force or cell traction forces. Penetration was determined by comparing the induced tension at a series of given membrane configurations to the critical membrane failure tension. The adhesion model predicts that penetration occurs within a finite window shortly after initial cell contact and adhesion, while the traction model predicts increasing penetration over a longer period. NW penetration rates determined from a cobalt ion delivery assay are compared to the predicted results from the two models. In addition, the effects of NW geometry and cell properties are systematically evaluated to identify the key factors for penetration.

    View details for DOI 10.1021/acsnano.5b05498

    View details for Web of Science ID 000367280100016

  • Engineering Ultra-Low Work Function of Graphene NANO LETTERS Yuan, H., Chang, S., Bargatin, I., Wang, N. C., Riley, D. C., Wang, H., Schwede, J. W., Provine, J., Pop, E., Shen, Z., Pianetta, P. A., Melosh, N. A., Howe, R. T. 2015; 15 (10): 6475-6480

    Abstract

    Low work function materials are critical for energy conversion and electron emission applications. Here, we demonstrate for the first time that an ultralow work function graphene is achieved by combining electrostatic gating with a Cs/O surface coating. A simple device is built from large-area monolayer graphene grown by chemical vapor deposition, transferred onto 20 nm HfO2 on Si, enabling high electric fields capacitive charge accumulation in the graphene. We first observed over 0.7 eV work function change due to electrostatic gating as measured by scanning Kelvin probe force microscopy and confirmed by conductivity measurements. The deposition of Cs/O further reduced the work function, as measured by photoemission in an ultrahigh vacuum environment, which reaches nearly 1 eV, the lowest reported to date for a conductive, nondiamond material.

    View details for DOI 10.1021/acs.nanolett.5b01916

    View details for PubMedID 26401728

  • Fabrication of sub-cell size "spiky" nanoparticles and their interfaces with biological cells. Journal of materials chemistry. B Xie, X., Melosh, N. A. 2015; 3 (26): 5155-5160

    Abstract

    Chip-based arrays of vertical nanowires (NWs) have attracted biomedical research interest for their one dimensional architecture and cell-interface properties, yet delivery of these devices in solution is not possible due to the inherent attachment of NWs to a planar substrate. To overcome this structural limitation, we report synthesis of hierarchical nanoparticles covered with stiff NWs, namely "spiky particles" which combine the advantages of supported vertical nanowires and aqueous delivery of suspended nanoparticles. ZnO NWs were grown onto SiO2 nanoparticles using a solution-based synthesis to avoid dispersing particles grown on solid substrates, and increase the particle quantity. These spiky particles can be fabricated with tunable particle and nanowire dimensions. The cell membrane interface with these hierarchical nanostructures were examined using scanning electron microscopy to determine the extent of engulfment and interaction.

    View details for DOI 10.1039/c5tb00452g

    View details for PubMedID 32262589

  • Nanotechnology and neurophysiology CURRENT OPINION IN NEUROBIOLOGY Angle, M. R., Cui, B., Melosh, N. A. 2015; 32: 132-140

    Abstract

    Neuroscience would be revolutionized by a technique to measure intracellular electrical potentials that would not disrupt cellular physiology and could be massively parallelized. Though such a technology does not yet exist, the technical hurdles for fabricating minimally disruptive, solid-state electrical probes have arguably been overcome in the field of nanotechnology. Nanoscale devices can be patterned with features on the same length scale as biological components, and several groups have demonstrated that nanoscale electrical probes can measure the transmembrane potential of electrogenic cells. Developing these nascent technologies into robust intracellular recording tools will now require a better understanding of device-cell interactions, especially the membrane-inorganic interface. Here we review the state-of-the art in nanobioelectronics, emphasizing the characterization and design of stable interfaces between nanoscale devices and cells.

    View details for DOI 10.1016/j.conb.2015.03.014

    View details for Web of Science ID 000356198900018

  • Nanotechnology and neurophysiology. Current opinion in neurobiology Angle, M. R., Cui, B., Melosh, N. A. 2015; 32: 132-140

    Abstract

    Neuroscience would be revolutionized by a technique to measure intracellular electrical potentials that would not disrupt cellular physiology and could be massively parallelized. Though such a technology does not yet exist, the technical hurdles for fabricating minimally disruptive, solid-state electrical probes have arguably been overcome in the field of nanotechnology. Nanoscale devices can be patterned with features on the same length scale as biological components, and several groups have demonstrated that nanoscale electrical probes can measure the transmembrane potential of electrogenic cells. Developing these nascent technologies into robust intracellular recording tools will now require a better understanding of device-cell interactions, especially the membrane-inorganic interface. Here we review the state-of-the art in nanobioelectronics, emphasizing the characterization and design of stable interfaces between nanoscale devices and cells.

    View details for DOI 10.1016/j.conb.2015.03.014

    View details for PubMedID 25889532

  • Nanostraws: A Nanofabricated Platform for Delivery of Cell-Impermeable, Synthetic Biomolecules Xu, A., Shieh, P., Sanman, L., Melosh, N. CELL PRESS. 2015: 149A
  • Bioorthogonal Calcium Modulation by Direct Intracellular Access using Nanostraws Xu, A., Aalipour, A., Kim, S., Melosh, N. CELL PRESS. 2015: 568A
  • Membrane indentation triggers clathrin lattice reorganization and fluidization SOFT MATTER Cordella, N., Lampo, T. J., Melosh, N., Spakowitz, A. J. 2015; 11 (3): 439-448

    Abstract

    Clathrin-mediated endocytosis involves the coordinated assembly of clathrin cages around membrane indentations, necessitating fluid-like reorganization followed by solid-like stabilization. This apparent duality in clathrin's in vivo behavior provides some indication that the physical interactions between clathrin triskelia and the membrane effect a local response that triggers fluid-solid transformations within the clathrin lattice. We develop a computational model to study the response of clathrin protein lattices to spherical deformations of the underlying flexible membrane. These deformations are similar to the shapes assumed during intracellular trafficking of nanoparticles. Through Monte Carlo simulations of clathrin-on-membrane systems, we observe that these membrane indentations give rise to a greater than normal defect density within the overlaid clathrin lattice. In many cases, the bulk surrounding lattice remains in a crystalline phase, and the extra defects are localized to the regions of large curvature. This can be explained by the fact that the in-plane elastic stress in the clathrin lattice are reduced by coupling defects to highly curved regions. The presence of defects brought about by indentation can result in the fluidization of a lattice that would otherwise be crystalline, resulting in an indentation-driven, defect-mediated phase transition. Altering subunit elasticity or membrane properties is shown to drive a similar transition, and we present phase diagrams that map out the combined effects of these parameters on clathrin lattice properties.

    View details for DOI 10.1039/c4sm01650e

    View details for Web of Science ID 000346911600002

  • Hybrid Diamond-Silicon Carbide Structures Incorporating Silicon-Vacancies in Diamond as Quantum Emitters Zhang, J., Ishiwata, H., Radulaski, M., Babinec, T. M., Mueller, K., Lagoudakis, K. G., Edgington, R., Alassaad, K., Ferro, G., Melosh, N. A., Shen, Z., Vuckovic, J., IEEE IEEE. 2015
  • Physical properties of materials derived from diamondoid molecules REPORTS ON PROGRESS IN PHYSICS Clay, W. A., Dahl, J. E., Carlson, R. M., Melosh, N. A., Shen, Z. 2015; 78 (1)
  • Thermally-enhanced minority carrier collection in hematite during photoelectrochemical water and sulfite oxidation JOURNAL OF MATERIALS CHEMISTRY A Ye, X., Yang, J., Boloor, M., Melosh, N. A., Chueh, W. C. 2015; 3 (20): 10801-10810

    View details for DOI 10.1039/c5ta02108a

    View details for Web of Science ID 000354395400024

  • Physical properties of materials derived from diamondoid molecules. Reports on progress in physics. Physical Society (Great Britain) CLAY, W. A., Dahl, J. E., Carlson, R. M., Melosh, N. A., Shen, Z. 2015; 78 (1): 016501-?

    Abstract

    Diamondoids are small hydrocarbon molecules which have the same rigid cage structure as bulk diamond. They can be considered the smallest nanoparticles of diamond. They exhibit a mixture of properties inherited from bulk cubic diamond as well as a number of unique properties related to their size and structure. Diamondoids with different sizes and shapes can be separated and purified, enabling detailed studies of the effects of size and structure on the diamondoids' properties and also allowing the creation of chemically functionalized diamondoids which can be used to create new materials. Most notable among these new materials are self-assembled monolayers of diamondoid-thiols, which exhibit a number of unique electron emission properties.

    View details for DOI 10.1088/0034-4885/78/1/016501

    View details for PubMedID 25551840

  • Fabrication of sub-cell size "spiky'' nanoparticles and their interfaces with biological cells JOURNAL OF MATERIALS CHEMISTRY B Xie, X., Melosh, N. A. 2015; 3 (26): 5155-5160

    View details for DOI 10.1039/c5tb00452g

    View details for Web of Science ID 000356964700003

  • Membrane indentation triggers clathrin lattice reorganization and fluidization. Soft matter Cordella, N., Lampo, T. J., Melosh, N., Spakowitz, A. J. 2014; 11 (3): 439-448

    Abstract

    Clathrin-mediated endocytosis involves the coordinated assembly of clathrin cages around membrane indentations, necessitating fluid-like reorganization followed by solid-like stabilization. This apparent duality in clathrin's in vivo behavior provides some indication that the physical interactions between clathrin triskelia and the membrane effect a local response that triggers fluid-solid transformations within the clathrin lattice. We develop a computational model to study the response of clathrin protein lattices to spherical deformations of the underlying flexible membrane. These deformations are similar to the shapes assumed during intracellular trafficking of nanoparticles. Through Monte Carlo simulations of clathrin-on-membrane systems, we observe that these membrane indentations give rise to a greater than normal defect density within the overlaid clathrin lattice. In many cases, the bulk surrounding lattice remains in a crystalline phase, and the extra defects are localized to the regions of large curvature. This can be explained by the fact that the in-plane elastic stress in the clathrin lattice are reduced by coupling defects to highly curved regions. The presence of defects brought about by indentation can result in the fluidization of a lattice that would otherwise be crystalline, resulting in an indentation-driven, defect-mediated phase transition. Altering subunit elasticity or membrane properties is shown to drive a similar transition, and we present phase diagrams that map out the combined effects of these parameters on clathrin lattice properties.

    View details for DOI 10.1039/c4sm01650e

    View details for PubMedID 25412023

  • Penetration of Cell Membranes and Synthetic Lipid Bilayers by Nanoprobes (vol 107, pg 2091, 2014) BIOPHYSICAL JOURNAL Angle, M. A., Wang, A., Thomas, A., Schaefer, A. T., Melosh, N. A. 2014; 107 (12): 3034
  • Penetration of Cell Membranes and Synthetic Lipid Bilayers by Nanoprobes BIOPHYSICAL JOURNAL Angle, M. R., Wang, A., Thomas, A., Schaefer, A. T., Melosh, N. A. 2014; 107 (9): 2091-2100

    Abstract

    Nanoscale devices have been proposed as tools for measuring and controlling intracellular activity by providing electrical and/or chemical access to the cytosol. Unfortunately, nanostructures with diameters of 50-500 nm do not readily penetrate the cell membrane, and rationally optimizing nanoprobes for cell penetration requires real-time characterization methods that are capable of following the process of membrane penetration with nanometer resolution. Although extensive work has examined the rupture of supported synthetic lipid bilayers, little is known about the applicability of these model systems to living cell membranes with complex lipid compositions, cytoskeletal attachment, and membrane proteins. Here, we describe atomic force microscopy (AFM) membrane penetration experiments in two parallel systems: live HEK293 cells and stacks of synthetic lipid bilayers. By using the same probes in both systems, we were able to clearly identify membrane penetration in synthetic bilayers and compare these events with putative membrane penetration events in cells. We examined membrane penetration forces for three tip geometries and 18 chemical modifications of the probe surface, and in all cases the median forces required to penetrate cellular and synthetic lipid bilayers with nanoprobes were greater than 1 nN. The penetration force was sensitive to the probe's sharpness, but not its surface chemistry, and the force did not depend on cell surface or cytoskeletal properties, with cells and lipid stacks yielding similar forces. This systematic assessment of penetration under various mechanical and chemical conditions provides insights into nanoprobe-cell interactions and informs the design of future intracellular nanoprobes.

    View details for DOI 10.1016/j.bpj.2014.09.023

    View details for Web of Science ID 000344232500011

    View details for PubMedCentralID PMC4223211

  • Penetration of cell membranes and synthetic lipid bilayers by nanoprobes. Biophysical journal Angle, M. R., Wang, A., Thomas, A., Schaefer, A. T., Melosh, N. A. 2014; 107 (9): 2091-100

    Abstract

    Nanoscale devices have been proposed as tools for measuring and controlling intracellular activity by providing electrical and/or chemical access to the cytosol. Unfortunately, nanostructures with diameters of 50-500 nm do not readily penetrate the cell membrane, and rationally optimizing nanoprobes for cell penetration requires real-time characterization methods that are capable of following the process of membrane penetration with nanometer resolution. Although extensive work has examined the rupture of supported synthetic lipid bilayers, little is known about the applicability of these model systems to living cell membranes with complex lipid compositions, cytoskeletal attachment, and membrane proteins. Here, we describe atomic force microscopy (AFM) membrane penetration experiments in two parallel systems: live HEK293 cells and stacks of synthetic lipid bilayers. By using the same probes in both systems, we were able to clearly identify membrane penetration in synthetic bilayers and compare these events with putative membrane penetration events in cells. We examined membrane penetration forces for three tip geometries and 18 chemical modifications of the probe surface, and in all cases the median forces required to penetrate cellular and synthetic lipid bilayers with nanoprobes were greater than 1 nN. The penetration force was sensitive to the probe's sharpness, but not its surface chemistry, and the force did not depend on cell surface or cytoskeletal properties, with cells and lipid stacks yielding similar forces. This systematic assessment of penetration under various mechanical and chemical conditions provides insights into nanoprobe-cell interactions and informs the design of future intracellular nanoprobes.

    View details for DOI 10.1016/j.bpj.2014.09.023

    View details for PubMedID 25418094

    View details for PubMedCentralID PMC4223211

  • Plasma Membrane and Actin Cytoskeleton as Synergistic Barriers to Nanowire Cell Penetration LANGMUIR Aalipour, A., Xu, A. M., Leal-Ortiz, S., Garner, C. C., Melosh, N. A. 2014; 30 (41): 12362-12367

    Abstract

    Nanowires are a rapidly emerging platform for manipulation of and material delivery directly into the cell cytosol. These high aspect ratio structures can breach the lipid membrane; however, the yield of penetrant structures is low, and the mechanism is largely unknown. In particular, some nanostructures appear to defeat the membrane transiently, while others can retain long-term access. Here, we examine if local dissolution of the lipid membrane, actin cytoskeleton, or both can enhance nanowire penetration. It is possible that, during cell contact, membrane rupture occurs; however, if the nanostructures do not penetrate the cytoskeleton, the membrane may reclose over a relatively short time frame. We show with quantitative analysis of the number of penetrating nanowires that the lipid bilayer and actin cytoskeleton are synergistic barriers to nanowire cell access, yet chemical poration through both is still insufficient to increase long-term access for adhered cells.

    View details for DOI 10.1021/la502273f

    View details for Web of Science ID 000343638800032

  • Plasma membrane and actin cytoskeleton as synergistic barriers to nanowire cell penetration. Langmuir Aalipour, A., Xu, A. M., Leal-Ortiz, S., Garner, C. C., Melosh, N. A. 2014; 30 (41): 12362-12367

    Abstract

    Nanowires are a rapidly emerging platform for manipulation of and material delivery directly into the cell cytosol. These high aspect ratio structures can breach the lipid membrane; however, the yield of penetrant structures is low, and the mechanism is largely unknown. In particular, some nanostructures appear to defeat the membrane transiently, while others can retain long-term access. Here, we examine if local dissolution of the lipid membrane, actin cytoskeleton, or both can enhance nanowire penetration. It is possible that, during cell contact, membrane rupture occurs; however, if the nanostructures do not penetrate the cytoskeleton, the membrane may reclose over a relatively short time frame. We show with quantitative analysis of the number of penetrating nanowires that the lipid bilayer and actin cytoskeleton are synergistic barriers to nanowire cell access, yet chemical poration through both is still insufficient to increase long-term access for adhered cells.

    View details for DOI 10.1021/la502273f

    View details for PubMedID 25244597

  • Microfabricated Thermally Isolated Low Work-Function Emitter JOURNAL OF MICROELECTROMECHANICAL SYSTEMS Lee, J., Bargatin, I., Vancil, B. K., Gwinn, T. O., Maboudian, R., Melosh, N. A., Howe, R. T. 2014; 23 (5): 1182-1187
  • Intracellular nanoprobes: Membrane penetration Angle, M., Melosh, N. A. AMER CHEMICAL SOC. 2014
  • Integrating membrane electrodes for cell recording Melosh, N. AMER CHEMICAL SOC. 2014
  • Rheology and simulation of 2-dimensional clathrin protein network assembly. Soft matter VanDersarl, J. J., Mehraeen, S., Schoen, A. P., Heilshorn, S. C., Spakowitz, A. J., Melosh, N. A. 2014; 10 (33): 6219-6227

    Abstract

    Clathrin is a three-legged protein complex that assembles into lattice structures on the cell membrane and transforms into fullerene-like cages during endocytosis. This dynamic structural flexibility makes clathrin an attractive building block for guided assembly. The assembly dynamics and the mechanical properties of clathrin protein lattices are studied using rheological measurements and theoretical modelling in an effort to better understand two dynamic processes: protein adsorption to the interface and assembly into a network. We find that percolation models for protein network formation are insufficient to describe clathrin network formation, but with Monte Carlo simulations we can describe the dynamics of network formation very well. Insights from this work can be used to design new bio-inspired nano-assembly systems.

    View details for DOI 10.1039/c4sm00025k

    View details for PubMedID 25012232

  • Rapid Calcium Modulation in Cells: Direct Intracellular Access using Nanostraws Xu, A., Kim, S. A., Aalipour, A., Melosh, N. A. CELL PRESS. 2014: 432A
  • Rough-smooth-rough dynamic interface growth in supported lipid bilayers PHYSICAL REVIEW E Verma, P., Mager, M. D., Melosh, N. A. 2014; 89 (1)

    Abstract

    The role of lipid bilayer viscoelasticity and the substrate-bilayer interactions on the spreading behavior of supported phospholipid bilayer membranes is studied using fluorescence microscopy. Unlike the monotonic roughening observed on silica or in other dynamic interface growth systems, a unique rough-smooth-rough (RSR) interface transition occurred on chromium oxide with a roughness exponent of 0.45 ± 0.04. This RSR transition is attributed to the elasticity of the lipid bilayer which is initially under compression due to surface interactions, and is well approximated by adding an elastic term to the quenched noise Edwards-Wilkinson equation. A phase diagram depicting the conditions necessary to observe RSR transitions in dynamic interface systems is derived, revealing the classes of dynamically evolving systems is broader than previously thought, and the viscoelastic nature of the lipid bilayer may play a role in supported membrane behavior.

    View details for DOI 10.1103/PhysRevE.89.012404

    View details for Web of Science ID 000332162500012

    View details for PubMedID 24580234

  • Quantification of nanowire penetration into living cells. Nature communications Xu, A. M., Aalipour, A., Leal-Ortiz, S., Mekhdjian, A. H., Xie, X., Dunn, A. R., Garner, C. C., Melosh, N. A. 2014; 5: 3613-?

    Abstract

    High-aspect ratio nanostructures such as nanowires and nanotubes are a powerful new tool for accessing the cell interior for delivery and sensing. Controlling and optimizing cellular access is a critical challenge for this new technology, yet even the most basic aspect of this process, whether these structures directly penetrate the cell membrane, is still unknown. Here we report the first quantification of hollow nanowires-nanostraws-that directly penetrate the membrane by observing dynamic ion delivery from each 100-nm diameter nanostraw. We discover that penetration is a rare event: 7.1±2.7% of the nanostraws penetrate the cell to provide cytosolic access for an extended period for an average of 10.7±5.8 penetrations per cell. Using time-resolved delivery, the kinetics of the first penetration event are shown to be adhesion dependent and coincident with recruitment of focal adhesion-associated proteins. These measurements provide a quantitative basis for understanding nanowire-cell interactions, and a means for rapidly assessing membrane penetration.

    View details for DOI 10.1038/ncomms4613

    View details for PubMedID 24710350

  • Quantification of nanowire penetration into living cells. Nature communications Xu, A. M., Aalipour, A., Leal-Ortiz, S., Mekhdjian, A. H., Xie, X., Dunn, A. R., Garner, C. C., Melosh, N. A. 2014; 5: 3613-?

    Abstract

    High-aspect ratio nanostructures such as nanowires and nanotubes are a powerful new tool for accessing the cell interior for delivery and sensing. Controlling and optimizing cellular access is a critical challenge for this new technology, yet even the most basic aspect of this process, whether these structures directly penetrate the cell membrane, is still unknown. Here we report the first quantification of hollow nanowires-nanostraws-that directly penetrate the membrane by observing dynamic ion delivery from each 100-nm diameter nanostraw. We discover that penetration is a rare event: 7.1±2.7% of the nanostraws penetrate the cell to provide cytosolic access for an extended period for an average of 10.7±5.8 penetrations per cell. Using time-resolved delivery, the kinetics of the first penetration event are shown to be adhesion dependent and coincident with recruitment of focal adhesion-associated proteins. These measurements provide a quantitative basis for understanding nanowire-cell interactions, and a means for rapidly assessing membrane penetration.

    View details for DOI 10.1038/ncomms4613

    View details for PubMedID 24710350

  • Mechanical Model of Vertical Nanowire Cell Penetration NANO LETTERS Xie, X., Xu, A. M., Angle, M. R., Tayebi, N., Verma, P., Melosh, N. A. 2013; 13 (12): 6002-6008

    Abstract

    Direct access into cells' interiors is essential for biomolecular delivery, gene transfection, and electrical recordings yet is challenging due to the cell membrane barrier. Recently, molecular delivery using vertical nanowires (NWs) has been demonstrated for introducing biomolecules into a large number of cells in parallel. However, the microscopic understanding of how and when the nanowires penetrate cell membranes is still lacking, and the degree to which actual membrane penetration occurs is controversial. Here we present results from a mechanical continuum model of elastic cell membrane penetration through two mechanisms, namely through "impaling" as cells land onto a bed of nanowires, and through "adhesion-mediated" penetration, which occurs as cells spread on the substrate and generate adhesion force. Our results reveal that penetration is much more effective through the adhesion mechanism, with NW geometry and cell stiffness being critically important. Stiffer cells have higher penetration efficiency, but are more sensitive to NW geometry. These results provide a guide to designing nanowires for applications in cell membrane penetration.

    View details for DOI 10.1021/nl403201a

    View details for Web of Science ID 000328439200039

    View details for PubMedID 24237230

  • Sterically directed chalcogenides: Self-assembling superstructures of n-dimensional materials Hohman, J., Yan, H., Melosh, N. A. AMER CHEMICAL SOC. 2013
  • A semiconductor/mixed ion and electron conductor heterojunction for elevated-temperature water splitting. Physical chemistry chemical physics Ye, X., Melas-Kyriazi, J., Feng, Z. A., Melosh, N. A., Chueh, W. C. 2013; 15 (37): 15459-15469

    Abstract

    Photoelectrochemical cells (PECs) have been studied extensively for dissociating water into hydrogen and oxygen. Key bottlenecks for achieving high solar-to-hydrogen efficiency in PECs include increasing solar spectrum utilization, surmounting overpotential losses, and aligning the absorber/electrochemical redox levels. We propose a new class of solid-state PECs based on mixed ionic and electronic conducting (MIEC) oxides that operates at temperatures significantly above ambient and utilizes both the light and thermal energy available from concentrated sunlight to dissociate water vapor. Unlike thermochemical and hybrid photo-thermochemical water-splitting routes, the elevated-temperature PEC is a single-step approach operating isothermally. At the heart of the solid-state PEC is a semiconductor light absorber coated with a thin MIEC layer for improved catalytic activity, electrochemical stability, and ionic conduction. The MIEC, placed between the gas phase and the semiconductor light absorber, provides a facile path for minority carriers to reach the water vapor as well as a path for the ionic carriers to reach the solid electrolyte. Elevated temperature operation allows reasonable band misalignments at the interfaces to be overcome, reduces the required overpotential, and facilitates rapid product diffusion away from the surface. In this work, we simulate the behavior of an oxygen-ion-conducting photocathode in 1-D. Using the detailed-balance approach, in conjunction with recombination and electrochemical reaction rates, the practical efficiency is calculated as a function of temperature, solar flux, and select material properties. For a non-degenerate light absorber with a 2.0 eV band-gap and an uphill band offset of 0.3 eV, an efficiency of 17% and 11% is predicted at 723 and 873 K, respectively.

    View details for DOI 10.1039/c3cp52536h

    View details for PubMedID 23939203

  • Covalent attachment of diamondoid phosphonic Acid dichlorides to tungsten oxide surfaces. Langmuir Li, F. H., Fabbri, J. D., Yurchenko, R. I., Mileshkin, A. N., Hohman, J. N., Yan, H., Yuan, H., Tran, I. C., Willey, T. M., Bagge-Hansen, M., Dahl, J. E., Carlson, R. M., Fokin, A. A., Schreiner, P. R., Shen, Z., Melosh, N. A. 2013; 29 (31): 9790-9797

    Abstract

    Diamondoids (nanometer-sized diamond-like hydrocarbons) are a novel class of carbon nanomaterials that exhibit negative electron affinity (NEA) and strong electron-phonon scattering. Surface-bound diamondoid monolayers exhibit monochromatic photoemission, a unique property that makes them ideal electron sources for electron-beam lithography and high-resolution electron microscopy. However, these applications are limited by the stability of the chemical bonding of diamondoids on surfaces. Here we demonstrate the stable covalent attachment of diamantane phosphonic dichloride on tungsten/tungsten oxide surfaces. X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared (FTIR) spectroscopy revealed that diamondoid-functionalized tungsten oxide films were stable up to 300-350 °C, a substantial improvement over conventional diamondoid thiolate monolayers on gold, which dissociate at 100-200 °C. Extreme ultraviolet (EUV) light stimulated photoemission from these diamondoid phosphonate monolayers exhibited a characteristic monochromatic NEA peak with 0.2 eV full width at half-maximum (fwhm) at room temperature, showing that the unique monochromatization property of diamondoids remained intact after attachment. Our results demonstrate that phosphonic dichloride functionality is a promising approach for forming stable diamondoid monolayers for elevated temperature and high-current applications such as electron emission and coatings in micro/nano electromechanical systems (MEMS/NEMS).

    View details for DOI 10.1021/la401781e

    View details for PubMedID 23855923

  • High-Bandwidth AFM Probes for Imaging in Air and Fluid JOURNAL OF MICROELECTROMECHANICAL SYSTEMS Vijayraghavan, K., Gellineau, A. A., Wang, A., Butte, M. J., Melosh, N. A., Solgaard, O. 2013; 22 (3): 603-612
  • Nanostraw-electroporation system for highly efficient intracellular delivery and transfection. ACS nano Xie, X., Xu, A. M., Leal-Ortiz, S., Cao, Y., Garner, C. C., Melosh, N. A. 2013; 7 (5): 4351-4358

    Abstract

    Nondestructive introduction of genes, proteins, and small molecules into mammalian cells with high efficiency is a challenging, yet critical, process. Here we demonstrate a simple nanoelectroporation platform to achieve highly efficient molecular delivery and high transfection yields with excellent uniformity and cell viability. The system is built on alumina nanostraws extending from a track-etched membrane, forming an array of hollow nanowires connected to an underlying microfluidic channel. Cellular engulfment of the nanostraws provides an intimate contact, significantly reducing the necessary electroporation voltage and increasing homogeneity over a large area. Biomolecule delivery is achieved by diffusion through the nanostraws and enhanced by electrophoresis during pulsing. The system was demonstrated to offer excellent spatial, temporal, and dose control for delivery, as well as providing high-yield cotransfection and sequential transfection.

    View details for DOI 10.1021/nn400874a

    View details for PubMedID 23597131

  • Measurement of elastic properties in fluid using high bandwidth atomic force microscope probes APPLIED PHYSICS LETTERS Vijayraghavan, K., Wang, A., Solgaard, O., Butte, M. J., Melosh, N. A. 2013; 102 (10)

    View details for DOI 10.1063/1.4795598

    View details for Web of Science ID 000316501200074

  • Nanostraw-Mediated Intracellular Delivery: Direct Observation of Cell/Nanotube Interfaces 57th Annual Meeting of the Biophysical-Society Xu, A. M., Aalipour, A., Melosh, N. A. CELL PRESS. 2013: 194A–194A
  • Microbead-separated thermionic energy converter with enhanced emission current PHYSICAL CHEMISTRY CHEMICAL PHYSICS Littau, K. A., Sahasrabuddhe, K., Barfield, D., Yuan, H., Shen, Z., Howe, R. T., Melosh, N. A. 2013; 15 (34): 14442-14446

    Abstract

    The efficiency of thermionic energy converters is a strong function of the inter-electrode separation due to space-charge limitations. Here we demonstrate vacuum thermionic energy converters constructed using barium dispenser cathodes and thin film tungsten anodes, separated by size specific alumina microbeads for simple device fabrication and inter-electrode gap control. The current and device efficiency at the maximum power point are strongly dependent on the inter-electrode gap, with a maximum device efficiency of 0.61% observed for a gap on the order of 5 μm. Paths to further reductions in space charge and improved anode work function are outlined with potential for over an order of magnitude improvement in output power and efficiency.

    View details for DOI 10.1039/c3cp52895b

    View details for Web of Science ID 000322725000036

    View details for PubMedID 23881241

  • Photon-enhanced thermionic emission from heterostructures with low interface recombination. Nature communications Schwede, J. W., Sarmiento, T., NARASIMHAN, V. K., Rosenthal, S. J., Riley, D. C., Schmitt, F., Bargatin, I., Sahasrabuddhe, K., Howe, R. T., Harris, J. S., Melosh, N. A., Shen, Z. 2013; 4: 1576-?

    Abstract

    Photon-enhanced thermionic emission is a method of solar-energy conversion that promises to combine photon and thermal processes into a single mechanism, overcoming fundamental limits on the efficiency of photovoltaic cells. Photon-enhanced thermionic emission relies on vacuum emission of photoexcited electrons that are in thermal equilibrium with a semiconductor lattice, avoiding challenging non-equilibrium requirements and exotic material properties. However, although previous work demonstrated the photon-enhanced thermionic emission effect, efficiency has until now remained very low. Here we describe electron-emission measurements on a GaAs/AlGaAs heterostructure that introduces an internal interface, decoupling the basic physics of photon-enhanced thermionic emission from the vacuum emission process. Quantum efficiencies are dramatically higher than in previous experiments because of low interface recombination and are projected to increase another order of magnitude with more stable, low work-function coatings. The results highlight the effectiveness of the photon-enhanced thermionic emission process and demonstrate that efficient photon-enhanced thermionic emission is achievable, a key step towards realistic photon-enhanced thermionic emission based energy conversion.

    View details for DOI 10.1038/ncomms2577

    View details for PubMedID 23481384

  • Nanostraw–Electroporation System for Highly Efficient Intracellular Delivery and Transfection Acs Nano Xie, X., Xu, A., M., Leal-Ortiz, S., Cao, Y., Garner, C., C., Melosh, N., A. 2013
  • Power-independent wavelength determination by hot carrier collection in metal-insulator-metal devices Nat Commun Wang, F., Melosh, N., A. 2013; 4: 1711
  • Measurement of elastic properties in fluid using high bandwidth atomic force microscope probes Applied Physics Letters Vijayraghavan, K., Wang, A., Solgaard, O., Butte, M., J., Melosh, N., A. 2013; 102: 103111 (4 pp.)-103111 (4 pp.)
  • Photon-enhanced thermionic emission from heterostructures with low interface recombination Nat Commun Schwede, J., W., Sarmiento, T., Narasimhan, V., K., Rosenthal, S., J., Riley, D., C., Schmitt, F., Melosh, Nicholas, A. 2013; 4: 1576
  • Photon-enhanced thermionic emission from heterostructures with low interface recombination. Nature communications Schwede, J. W., Sarmiento, T., NARASIMHAN, V. K., Rosenthal, S. J., Riley, D. C., Schmitt, F., Bargatin, I., Sahasrabuddhe, K., Howe, R. T., Harris, J. S., Melosh, N. A., Shen, Z. 2013; 4: 1576-?

    Abstract

    Photon-enhanced thermionic emission is a method of solar-energy conversion that promises to combine photon and thermal processes into a single mechanism, overcoming fundamental limits on the efficiency of photovoltaic cells. Photon-enhanced thermionic emission relies on vacuum emission of photoexcited electrons that are in thermal equilibrium with a semiconductor lattice, avoiding challenging non-equilibrium requirements and exotic material properties. However, although previous work demonstrated the photon-enhanced thermionic emission effect, efficiency has until now remained very low. Here we describe electron-emission measurements on a GaAs/AlGaAs heterostructure that introduces an internal interface, decoupling the basic physics of photon-enhanced thermionic emission from the vacuum emission process. Quantum efficiencies are dramatically higher than in previous experiments because of low interface recombination and are projected to increase another order of magnitude with more stable, low work-function coatings. The results highlight the effectiveness of the photon-enhanced thermionic emission process and demonstrate that efficient photon-enhanced thermionic emission is achievable, a key step towards realistic photon-enhanced thermionic emission based energy conversion.

    View details for DOI 10.1038/ncomms2577

    View details for PubMedID 23481384

  • Power-independent wavelength determination by hot carrier collection in metal-insulator-metal devices. Nature communications Wang, F., Melosh, N. A. 2013; 4: 1711-?

    Abstract

    Wavelength separation and detection is generally performed by spatial dispersal of incident light onto separate detectors, or by appropriate wavelength-selective filters. Here we demonstrate direct wavelength determination of monochromatic light in a power-independent fashion with a single metal-insulator-metal device. This simple platform allows facile fabrication and scaling, and may be useful for on-chip optical communications. Although a single wavelength is power-independent, with two or more concurrent input signals, the output obeys a simple current sum rule, allowing the output to be tuned by choosing the input wavelengths and power. Finally, we demonstrate real-time deconvolution of three different wavelength asynchronous signals.

    View details for DOI 10.1038/ncomms2728

    View details for PubMedID 23591878

  • Photocathode device using diamondoid and cesium bromide films APPLIED PHYSICS LETTERS Clay, W. A., Maldonado, J. R., Pianetta, P., Dahl, J. E., Carlson, R. M., Schreiner, P. R., Fokin, A. A., Tkachenko, B. A., Melosh, N. A., Shen, Z. 2012; 101 (24)

    View details for DOI 10.1063/1.4769043

    View details for Web of Science ID 000312490000024

  • A model for emission yield from planar photocathodes based on photon-enhanced thermionic emission or negative-electron-affinity photoemission JOURNAL OF APPLIED PHYSICS Sahasrabuddhe, K., Schwede, J. W., Bargatin, I., Jean, J., Howe, R. T., Shen, Z., Melosh, N. A. 2012; 112 (9)

    View details for DOI 10.1063/1.4764106

    View details for Web of Science ID 000311968400139

  • Diamondoid coating enables disruptive approach for chemical and magnetic imaging with 10 nm spatial resolution APPLIED PHYSICS LETTERS Ishiwata, H., Acremann, Y., Scholl, A., Rotenberg, E., Hellwig, O., Dobisz, E., Doran, A., Tkachenko, B. A., Fokin, A. A., Schreiner, P. R., Dahl, J. E., Carlson, R. M., Melosh, N., Shen, Z., Ohldag, H. 2012; 101 (16)

    View details for DOI 10.1063/1.4756893

    View details for Web of Science ID 000310669300052

  • Nanostraws for Direct Fluidic Intracellular Access NANO LETTERS VanDersarl, J. J., Xu, A. M., Melosh, N. A. 2012; 12 (8): 3881-3886

    Abstract

    Nanomaterials are promising candidates to improve the delivery efficiency and control of active agents such as DNA or drugs directly into cells. Here we demonstrate cell-culture platforms of nanotemplated "nanostraws" that pierce the cell membrane, providing a permanent fluidic pipeline into the cell for direct cytosolic access. Conventional polymeric track-etch cell culture membranes are alumina coated and etched to produce fields of nanostraws with controllable diameter, thickness, and height. Small molecules and ions were successfully transported into the cytosol with 40 and 70% efficiency, respectively, while GFP plasmids were successfully delivered and expressed. These platforms open the way for active, reproducible delivery of a wide variety of species into cells without endocytosis.

    View details for DOI 10.1021/nl204051v

    View details for Web of Science ID 000307211000001

    View details for PubMedID 22166016

  • Shape Matters: Intravital Microscopy Reveals Surprising Geometrical Dependence for Nanoparticles in Tumor Models of Extravasation NANO LETTERS Smith, B. R., Kempen, P., Bouley, D., Xu, A., Liu, Z., Melosh, N., Dai, H., Sinclair, R., Gambhir, S. S. 2012; 12 (7): 3369-3377

    Abstract

    Delivery is one of the most critical obstacles confronting nanoparticle use in cancer diagnosis and therapy. For most oncological applications, nanoparticles must extravasate in order to reach tumor cells and perform their designated task. However, little understanding exists regarding the effect of nanoparticle shape on extravasation. Herein we use real-time intravital microscopic imaging to meticulously examine how two different nanoparticles behave across three different murine tumor models. The study quantitatively demonstrates that high-aspect ratio single-walled carbon nanotubes (SWNTs) display extravasational behavior surprisingly different from, and counterintuitive to, spherical nanoparticles although the nanoparticles have similar surface coatings, area, and charge. This work quantitatively indicates that nanoscale extravasational competence is highly dependent on nanoparticle geometry and is heterogeneous.

    View details for DOI 10.1021/nl204175t

    View details for Web of Science ID 000306296200004

    View details for PubMedID 22650417

    View details for PubMedCentralID PMC3495189

  • Optimal emitter-collector gap for thermionic energy converters APPLIED PHYSICS LETTERS Lee, J., Bargatin, I., Melosh, N. A., Howe, R. T. 2012; 100 (17)

    View details for DOI 10.1063/1.4707379

    View details for Web of Science ID 000303340300106

  • Mesoporous Thin-Film on Highly-Sensitive Resonant Chemical Sensor for Relative Humidity and CO2 Detection ANALYTICAL CHEMISTRY Lee, H. J., Park, K. K., Kupnik, M., Melosh, N. A., Khuri-Yakub, B. T. 2012; 84 (7): 3063-3066

    Abstract

    Distributed sensing of gas-phase chemicals is a promising application for mesoporous materials when combined with highly sensitive miniaturized gas sensors. We present a direct application of a mesoporous silica thin film on a highly sensitive miniaturized resonant chemical sensor with a mass sensitivity at the zeptogram scale for relative humidity and CO(2) detection. Using mesoporous silica thin-film, we report one of the lowest volume resolutions and a sensitive detection of 5.1 × 10(-4)% RH/Hz to water vapor in N(2), which is 70 times higher than a device with a nontemplated silica layer. In addition, a mesoporous thin-film that is functionalized with an amino-group is directly applied on the resonant sensor, which exhibits a volume sensitivity of 1.6 × 10(-4)%/Hz and a volume resolution of 1.82 × 10(-4)% to CO(2) in N(2).

    View details for DOI 10.1021/ac300225c

    View details for Web of Science ID 000302829800006

    View details for PubMedID 22372606

  • Energetics and dynamics of direct cell-penetrating peptide translocation using atomic force microscopy Hager-Barnard, E., Wang, A., Melosh, N. A. AMER CHEMICAL SOC. 2012
  • Direct Penetration of Cell-Penetrating Peptides Across Lipid Bilayers Wang, A., Melosh, N. CELL PRESS. 2012: 487A
  • Mechanical Model of Cell Membrane Penetration by Vertical Nanowires Xie, X., Melosh, N. A. CELL PRESS. 2012: 205A
  • Novel Nanoscale Patch-Clamp Arrays for Probing Neuronal Electrical Activities Tayebi, N., Chang, K. G., Melosh, N. CELL PRESS. 2012: 299A
  • Nanostraws for Direct Fluidic Intracellular Access Xu, A. M., VanDersarl, J. J., Melosh, N. A. CELL PRESS. 2012: 583A
  • MICROFABRICATED SILICON CARBIDE THERMIONIC ENERGY CONVERTER FOR SOLAR ELECTRICITY GENERATION 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS) Lee, J. H., Bargatin, I., Gwinn, T. O., Vincent, M., Littau, K. A., Maboudian, R., Shen, Z., Melosh, N. A., Howe, R. T. IEEE. 2012
  • Diamondoid coating enables disruptive approach for chemical and magnetic imaging with 10 nm spatial resolution Applied Physics Letters Ishiwata, H., Acremann, Y., Scholl, A., Rotenberg, E., Hellwig, O., Dobisz, E., Melosh, Nicholas, A. 2012; 101: 163101 (5 pp.)-163101 (5 pp.)163101 (5 pp.)
  • Optimal emitter-collector gap for thermionic energy converters Applied Physics Letters Lee, J., H., Bargatin, I., Melosh, N., A., Howe, R., T. 2012; 100
  • A model for emission yield from planar photocathodes based on photon-enhanced thermionic emission or negative-electron-affinity photoemission Journal of Applied Physics Sahasrabuddhe, K., Schwede, J., W., Bargatin, I., Jean, J., Howe, R., T., Shen, Z., X., Melosh, Nicholas, A. 2012; 112: 094907 (10 pp.)-094907 (10 pp.)094907 (10 pp.)
  • Photocathode device using diamondoid and cesium bromide films Applied Physics Letters Clay, W., A., Maldonado, J., R., Pianetta, P., Dahl, J., E.P., Carlson, R., M.K., Schreiner, P., R., Melosh, Nicholas, A. 2012; 101: 241605 (5 pp.)-241605 (5 pp.)
  • Plasmonic Energy Collection through Hot Carrier Extraction NANO LETTERS Wang, F., Melosh, N. A. 2011; 11 (12): 5426-5430

    Abstract

    Conversion of light into direct current is important for applications ranging from energy conversion to photodetection, yet often challenging over broad photon frequencies. Here we show a new architecture based on surface plasmon excitation within a metal-insulator-metal device that produces power based on spatial confinement of electron excitation through plasmon absorption. Plasmons excited in the upper metal are absorbed, creating a high concentration of hot electrons which can inject above or tunnel through the thin insulating barrier, producing current. The theoretical power conversion efficiency enhancement achieved can be almost 40 times larger than that of direct illumination while utilizing a broad spectrum of IR to visible wavelengths. Here we present both theoretical estimates of the power conversion efficiency and experimental device measurements, which show clear rectification and power conversion behavior.

    View details for DOI 10.1021/nl203196z

    View details for Web of Science ID 000297950200056

    View details for PubMedID 22023372

  • Photoluminescence of diamondoid crystals JOURNAL OF APPLIED PHYSICS Clay, W. A., Sasagawa, T., Iwasa, A., Liu, Z., Dahl, J. E., Carlson, R. M., Kelly, M., Melosh, N., Shen, Z. 2011; 110 (9)

    View details for DOI 10.1063/1.3657522

    View details for Web of Science ID 000297062100028

  • Molecular Structure Influences the Stability of Membrane Penetrating Biointerfaces NANO LETTERS Almquist, B. D., Melosh, N. A. 2011; 11 (5): 2066-2070

    Abstract

    Nanoscale patterning of hydrophobic bands on otherwise hydrophilic surfaces allows integration of inorganic structures through biological membranes, reminiscent of transmembrane proteins. Here we show that a set of innate molecular properties of the self-assembling hydrophobic band determine the resulting interface stability. Surprisingly, hydrophobicity is found to be a secondary factor with monolayer crystallinity the major determinate of interface strength. These results begin to establish guidelines for seamless bioinorganic integration of nanoscale probes with lipid membranes.

    View details for DOI 10.1021/nl200542m

    View details for Web of Science ID 000290373000037

    View details for PubMedID 21469728

  • Engineering cell access with nano-functionalized posts 241st National Meeting and Exposition of the American-Chemical-Society (ACS) Verma, P., Tayebi, N., Almquist, B., Melosh, N. AMER CHEMICAL SOC. 2011
  • Theoretical analysis of hot electron collection in metal-insulator-metal devices Conference on Next Generation (Nano) Photonic and Cell Technologies for Solar Energy Conversion II Wang, F., Melosh, N. A. SPIE-INT SOC OPTICAL ENGINEERING. 2011

    View details for DOI 10.1117/12.894250

    View details for Web of Science ID 000303797800011

  • Photoluminescence of Diamond Crystals Journal of Applied Physics Clay, W., A., Sasagawa, T., Iwasa, A., Liu, Z., Dahl, J., E., Carlson, R., M.K., Melosh, Nicholas, A. 2011
  • Plasmonic energy collection through hot carrier extraction Nano Letters Wang, F., Melosh, N., A. 2011; 11: 5426-30
  • Nanostraws for Direct Fluidic Intracellular Access Nano Letters Vandersarl, J., J., Xu, A., M., Melosh, N., A. 2011
  • Rapid spatial and temporal controlled signal delivery over large cell culture areas LAB ON A CHIP VanDersarl, J. J., Xu, A. M., Melosh, N. A. 2011; 11 (18): 3057-3063

    Abstract

    Controlled chemical delivery in microfluidic cell culture devices often relies on slowly evolving diffusive gradients, as the spatial and temporal control provided by fluid flow results in significant cell-perturbation. In this paper we introduce a microfluidic device architecture that allows for rapid spatial and temporal soluble signal delivery over large cell culture areas without fluid flow over the cells. In these devices the cell culture well is divided from a microfluidic channel located directly underneath the chamber by a nanoporous membrane. This configuration requires chemical signals in the microchannel to only diffuse through the thin membrane into large cell culture area, rather than diffuse in from the sides. The spatial chemical pattern within the microfluidic channel was rapidly transferred to the cell culture area with good fidelity through diffusion. The cellular temporal response to a step-function signal showed that dye reached the cell culture surface within 45 s, and achieved a static concentration in under 6 min. Chemical pulses of less than one minute were possible by temporally alternating the signal within the microfluidic channel, enabling rapid flow-free chemical microenvironment control for large cell culture areas.

    View details for DOI 10.1039/c1lc20311h

    View details for Web of Science ID 000294263400004

    View details for PubMedID 21805010

  • Nanoscale patterning controls inorganic-membrane interface structure NANOSCALE Almquist, B. D., Verma, P., Cai, W., Melosh, N. A. 2011; 3 (2): 391-400

    Abstract

    The ability to non-destructively integrate inorganic structures into or through biological membranes is essential to realizing full bio-inorganic integration, including arrayed on-chip patch-clamps, drug delivery, and biosensors. Here we explore the role of nanoscale patterning on the strength of biomembrane-inorganic interfaces. AFM measurements show that inorganic probes functionalized with hydrophobic bands with thicknesses complimentary to the hydrophobic lipid bilayer core exhibit strong attachment in the bilayer. As hydrophobic band thickness increases to 2-3 times the bilayer core the interfacial strength decreases, comparable to homogeneously hydrophobic probes. Analytical calculations and molecular dynamics simulations predict a transition between a 'fused' interface and a 'T-junction' that matches the experimental results, showing lipid disorder and defect formation for thicker bands. These results show that matching biological length scales leads to more intimate bio-inorganic junctions, enabling rational design of non-destructive membrane interfaces.

    View details for DOI 10.1039/c0nr00486c

    View details for Web of Science ID 000287363500006

    View details for PubMedID 20931126

  • ENZYME ASSAYS Detection by failure NATURE CHEMISTRY Melosh, N. A. 2010; 2 (12): 1006-1007

    View details for DOI 10.1038/nchem.914

    View details for Web of Science ID 000284527300004

    View details for PubMedID 21107359

  • Effects of tip-induced material reorganization in dynamic force spectroscopy PHYSICAL REVIEW E Hager-Barnard, E. A., Melosh, N. A. 2010; 82 (3)

    Abstract

    Dynamic force spectroscopy (DFS) has become a well-established method for characterizing bond strength, yet may also be useful for examining more complex phenomena such as dynamic processes or multiple reaction pathways. Here, we analyze the case where contact between an atomic force microscopy (AFM) tip and the sample induces sample reorganization during testing. Surface contact often causes molecular rearrangement in soft materials, which could also result in an altered reaction energy landscape. We model this situation by allowing the energy barrier position and magnitude to be time-dependent functions with a characteristic time scale τ . We find dynamic energy barriers result in two linear regimes with a dramatic transition near t=τ in the DFS analysis. The sharp transition region is a hallmark of a moving energy barrier and indicates the time scale of reorganization. These results illustrate that DFS may be useful to monitor dynamic transitions and also highlight the importance of extending the loading rate range used in DFS studies.

    View details for DOI 10.1103/PhysRevE.82.031911

    View details for Web of Science ID 000282133400008

    View details for PubMedID 21230112

  • Photon-enhanced thermionic emission for solar concentrator systems NATURE MATERIALS Schwede, J. W., Bargatin, I., Riley, D. C., Hardin, B. E., Rosenthal, S. J., Sun, Y., Schmitt, F., Pianetta, P., Howe, R. T., Shen, Z., Melosh, N. A. 2010; 9 (9): 762-767

    Abstract

    Solar-energy conversion usually takes one of two forms: the 'quantum' approach, which uses the large per-photon energy of solar radiation to excite electrons, as in photovoltaic cells, or the 'thermal' approach, which uses concentrated sunlight as a thermal-energy source to indirectly produce electricity using a heat engine. Here we present a new concept for solar electricity generation, photon-enhanced thermionic emission, which combines quantum and thermal mechanisms into a single physical process. The device is based on thermionic emission of photoexcited electrons from a semiconductor cathode at high temperature. Temperature-dependent photoemission-yield measurements from GaN show strong evidence for photon-enhanced thermionic emission, and calculated efficiencies for idealized devices can exceed the theoretical limits of single-junction photovoltaic cells. The proposed solar converter would operate at temperatures exceeding 200 degrees C, enabling its waste heat to be used to power a secondary thermal engine, boosting theoretical combined conversion efficiencies above 50%.

    View details for DOI 10.1038/NMAT2814

    View details for Web of Science ID 000281178400029

    View details for PubMedID 20676086

  • Gigaohm resistance membrane seals with stealth probe electrodes APPLIED PHYSICS LETTERS Verma, P., Melosh, N. A. 2010; 97 (3)

    View details for DOI 10.1063/1.3464954

    View details for Web of Science ID 000280255800104

  • An Electrostatic Model for DNA Surface Hybridization BIOPHYSICAL JOURNAL Wong, I. Y., Melosh, N. A. 2010; 98 (12): 2954-2963

    Abstract

    DNA hybridization at surfaces is a crucial process for biomolecular detection, genotyping, and gene expression analysis. However, hybridization density and kinetics can be strongly inhibited by electric fields from the negatively charged DNA as the reaction proceeds. Here, we develop an electrostatic model to optimize hybridization density and kinetics as a function of DNA surface density, salt concentrations, and applied voltages. The electrostatic repulsion from a DNA surface layer is calculated numerically and incorporated into a modified Langmuir scheme, allowing kinetic suppression of hybridization. At the low DNA probe densities typically used in assays (<10(13)/cm(2)), electrostatics effects are largely screened and hybridization is completed with fast kinetics. However, higher hybridization densities can be achieved at intermediate DNA surface densities, albeit with slower kinetics. The application of positive voltages circumvents issues resulting from the very high DNA probe density, allowing highly enhanced hybridization densities and accelerated kinetics, and validating recent experimental measurements.

    View details for DOI 10.1016/j.bpj.2010.03.017

    View details for Web of Science ID 000278913500024

    View details for PubMedID 20550908

    View details for PubMedCentralID PMC2884251

  • Dynamic actuation using nano-bio interfaces MATERIALS TODAY Wong, I. Y., Almquist, B. D., Melosh, N. A. 2010; 13 (6): 14-22
  • Continuum model of mechanical interactions between biological cells and artificial nanostructures BIOINTERPHASES Verma, P., Wong, I. Y., Melosh, N. A. 2010; 5 (2): 37-44

    Abstract

    The controlled insertion of artificial nanostructures into biological cells has been utilized for patch clamping, targeted drug delivery, cell lysing, and cell mechanics measurements. In this work, an elastic continuum model is implemented to treat the deformation of spherical cells in solution due to their interaction with cylindrical probes. At small deformations, the force varies nonlinearly with indentation due to global deformation of the cell shape. However, at large indentations, the force varies linearly with indentation due to more localized deformations. These trends are consistent with experimental measurements under comparable conditions and can be used to develop design rules for optimizing probe-cell interactions.

    View details for DOI 10.1116/1.3431960

    View details for Web of Science ID 000282333300003

    View details for PubMedID 20831347

  • Single-Step Process to Reconstitute Cell Membranes on Solid Supports LANGMUIR Mager, M. D., Melosh, N. A. 2010; 26 (7): 4635-4638

    Abstract

    A new technique is presented to create supported lipid bilayers from whole cell lipids without the use of detergent or solvent extraction. In a modification of the bubble collapse deposition (BCD) technique, an air bubble is created underwater and brought into contact with a population of cells. The high-energy air/water interface extracts the lipid component of the cell membrane, which can subsequently be redeposited as a fluid bilayer on another substrate. The resulting bilayers were characterized with fluorescence microscopy, and it was found that both leaflets of the cell membrane are transferred but the cytoskeleton is not. The resulting supported bilayer was fluid over an area much larger than a single cell, demonstrating the capacity to create large, continuous bilayer samples. This capability to create fluid, biologically relevant bilayers will facilitate the use of high-resolution scanning microscopy techniques in the study of membrane-related processes.

    View details for DOI 10.1021/la100583f

    View details for Web of Science ID 000275995100020

    View details for PubMedID 20205459

  • Fusion of biomimetic stealth probes into lipid bilayer cores PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA Almquist, B. D., Melosh, N. A. 2010; 107 (13): 5815-5820

    Abstract

    Many biomaterials are designed to regulate the interactions between artificial and natural surfaces. However, when materials are inserted through the cell membrane itself the interface formed between the interior edge of the membrane and the material surface is not well understood and poorly controlled. Here we demonstrate that by replicating the nanometer-scale hydrophilic-hydrophobic-hydrophilic architecture of transmembrane proteins, artificial "stealth" probes spontaneously insert and anchor within the lipid bilayer core, forming a high-strength interface. These nanometer-scale hydrophobic bands are readily fabricated on metallic probes by functionalizing the exposed sidewall of an ultrathin evaporated Au metal layer rather than by lithography. Penetration and adhesion forces for butanethiol and dodecanethiol functionalized probes were directly measured using atomic force microscopy (AFM) on thick stacks of lipid bilayers to eliminate substrate effects. The penetration dynamics were starkly different for hydrophobic versus hydrophilic probes. Both 5- and 10 nm thick hydrophobically functionalized probes naturally resided within the lipid core, while hydrophilic probes remained in the aqueous region. Surprisingly, the barrier to probe penetration with short butanethiol chains (E(o,5 nm) = 21.8k(b)T, E(o,10 nm) = 15.3k(b)T) was dramatically higher than longer dodecanethiol chains (E(o,5 nm) = 14.0k(b)T, E(o,10 nm) = 10.9k(b)T), indicating that molecular mobility and orientation also play a role in addition to hydrophobicity in determining interface stability. These results highlight a new strategy for designing artificial cell interfaces that can nondestructively penetrate the lipid bilayer.

    View details for DOI 10.1073/pnas.0909250107

    View details for Web of Science ID 000276159500024

    View details for PubMedID 20212151

    View details for PubMedCentralID PMC2851869

  • Lateral fusion of lipid membranes to nanoscale functionalized Almquist, B., Melosh, N. AMER CHEMICAL SOC. 2010
  • Clathrin protein assemblies as a biotemplate VanDersarl, J. J., Melosh, N. A. AMER CHEMICAL SOC. 2010
  • AFM force spectroscopy on TAT membrane penetration Hager-Barnard, E. A., Almquist, B. D., Melosh, N. A. AMER CHEMICAL SOC. 2010
  • Gigaohm resistance membrane seals with stealth probe electrodes Applied Physics Letters Verma, P., Melosh, N., A. 2010; 97
  • AFM Force Spectroscopy on TAT Membrane Penetration Hager-Barnard, E. A., Almquist, B. D., Melosh, N. A. CELL PRESS. 2010: 217A–218A
  • Fusion of Biomimetic 'Stealth' Probes into Lipid Bilayer Cores Almquist, B., Melosh, N. CELL PRESS. 2010: 596A
  • Fusion of Biomimetic ‘Stealth’ Probes into Lipid Bilayer Cores Almquist, B., D., Melosh, N., A. 2010
  • Effects of tip-induced material reorganization in dynamic force spectroscopy Phys. Rev. E Hager-Barnard, E., Melosh, N., A. 2010; 82: 31911
  • ENZYME ASSAYS: Detection by failure Nature Chemistry Melosh, N., A. 2010; 2: 1006-1007
  • Directed Hybridization and Melting of DNA Linkers using Counterion-Screened Electric Fields NANO LETTERS Wong, I. Y., Melosh, N. A. 2009; 9 (10): 3521-3526

    Abstract

    Dynamic self-assembly using responsive, "smart" materials such as DNA is a promising route toward reversible assembly and patterning of nanostructures for error-corrected fabrication, enhanced biosensors, drug delivery and gene therapy. DNA linkers were designed with strategically placed mismatches, allowing rapid attachment and release from a surface in a counterion-screened electric field. These electrostatic fields are inherently highly localized, directing assembly with nanometer precision while avoiding harmful electrochemical reactions. We show that depending on the sign of the applied field, the DNA hybridization density is strongly enhanced or diminished due to the high negative charge density of immobilized DNA. This use of dynamic fields rather than static templates enables fabrication of heterogeneously hybridized electrodes with different functional moieties, despite the use of identical linker sequences.

    View details for DOI 10.1021/nl901710n

    View details for Web of Science ID 000270670500025

    View details for PubMedID 19606816

  • Determining orientational structure of diamondoid thiols attached to silver using near-edge X-ray absorption fine structure spectroscopy JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA Willey, T. M., Lee, J. R., Fabbri, J. D., Wang, D., Nielsen, M. H., Randel, J. C., Schreiner, P. R., Fokin, A. A., Tkachenko, B. A., Fokina, N. A., Dahl, J. E., Carlson, R. M., Terminello, L. J., Melosh, N. A., van Buuren, T. 2009; 172 (1-3): 69-77
  • Influence of electrostatic fields in self assembly Melosh, N. A. AMER CHEMICAL SOC. 2009
  • Identification and Passivation of Defects in Self-Assembled Monolayers LANGMUIR Preiner, M. J., Melosh, N. A. 2009; 25 (5): 2585-2587

    Abstract

    We demonstrate imaging of nanoscale defects in self-assembled monolayers (SAMs). Atomic layer deposition of aluminum oxide (AlO(x)) onto hydrophobic SAMs is followed by imaging using scanning electron microscopy (SEM). The insulating AlO(x) selectively deposits onto the exposed substrate at defect sites and becomes charged during imaging, providing high contrast even for nanometer scale defects. The deposited AlO(x) also acts as a barrier for electron transfer, thereby simultaneously electrically passivating the defects in the SAM as it labels them.

    View details for DOI 10.1021/la804162a

    View details for Web of Science ID 000263770800009

    View details for PubMedID 19437743

  • Lipid Membrane Penetration Forces from AFM Force Spectroscopy Hager-Barnard, E. A., Almquist, B. D., Melosh, N. A. CELL PRESS. 2009: 389A
  • Fusion of Biomimetic 'Stealth' Probes into Lipid Bilayer Cores Almquist, B. D., Melosh, N. A. CELL PRESS. 2009: 354A
  • An Internally Amplified Signal SOI Nano-bridge Biosensor for Electrical Detection of DNA Hybridization IEEE International SOI Conference 2009 Parizi, K. B., Melosh, N., Nishi, Y. IEEE. 2009: 67–68
  • Determining orientational structure of diamondoid thiols attached to silver using near-edge X-ray absorption fine structure spectroscopy Journal of Electron Spectroscopy and Related Phenomena Willey, T., M., Lee, J., R.I., Fabbri, J., D., Wang, D., Nielsen, M., H., Randel, J., C., Melosh, Nicholas, A. 2009; 172: 69-77
  • Origin of the Monochromatic Photoemission Peak in Diamondoid Monolayers NANO LETTERS Clay, W. A., Liu, Z., Yang, W., Fabbri, J. D., Dahl, J. E., Carlson, R. M., Sun, Y., Schreiner, P. R., Fokin, A. A., Tkachenko, B. A., Fokina, N. A., Pianetta, P. A., Melosh, N., Shen, Z. 2009; 9 (1): 57-61

    Abstract

    Recent photoemission experiments have discovered a highly monochromatized secondary electron peak emitted from diamondoid self-assembled monolayers on metal substrates. New experimental data and simulation results are presented to show that a combination of negative electron affinity and strong electron-phonon scattering is responsible for this behavior. The simulation results are generated using a simple Monte Carlo transport algorithm. The simulated spectra recreate the main spectral features of the measured ones.

    View details for DOI 10.1021/nl802310k

    View details for Web of Science ID 000262519100010

    View details for PubMedID 18975993

  • Nanopore-Spanning Lipid Bilayers for Controlled Chemical Release ADVANCED MATERIALS Mager, M. D., Melosh, N. A. 2008; 20 (23): 4423-4427
  • Formation and Characterization of Fluid Lipid Bilayers on Alumina LANGMUIR Mager, M. D., Almquist, B., Melosh, N. A. 2008; 24 (22): 12734-12737

    Abstract

    Fluid lipid bilayers were deposited on alumina substrates with the use of bubble collapse deposition (BCD). Previous studies using vesicle rupture have required the use of charged lipids or surface functionalization to induce bilayer formation on alumina, but these modifications are not necessary with BCD. Photobleaching experiments reveal that the diffusion coefficient of POPC on alumina is 0.6 microm (2)/s, which is much lower than the 1.4-2.0 microm (2)/s reported on silica. Systematically accounting for roughness, immobile regions and membrane viscosity shows that pinning sites account for about half of this drop in diffusivity. The remainder of the difference is attributed to a more tightly bound water state on the alumina surface, which induces a larger drag on the bilayer.

    View details for DOI 10.1021/la802726u

    View details for Web of Science ID 000260874800004

    View details for PubMedID 18942863

  • Diamondoids as low-kappa dielectric materials APPLIED PHYSICS LETTERS Clay, W. A., Sasagawa, T., Kelly, M., Dahl, J. E., Carlson, R. M., Melosh, N., Shen, Z. 2008; 93 (17)

    View details for DOI 10.1063/1.3010379

    View details for Web of Science ID 000260571800066

  • Near-edge X-ray absorption fine structure spectroscopy of diamondoid thiol monolayers on gold JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Willey, T. M., Fabbri, J. D., Lee, J. R., Schreiner, P. R., Fokin, A. A., Tkachenko, B. A., Fokina, N. A., Dahl, J. E., Carlson, R. M., Vance, A. L., Yang, W., Terminello, L. J., van Buuren, T., Melosh, N. A. 2008; 130 (32): 10536-10544

    Abstract

    Diamondoids, hydrocarbon molecules with cubic-diamond-cage structures, have unique properties with potential value for nanotechnology. The availability and ability to selectively functionalize this special class of nanodiamond materials opens new possibilities for surface modification, for high-efficiency field emitters in molecular electronics, as seed crystals for diamond growth, or as robust mechanical coatings. The properties of self-assembled monolayers (SAMs) of diamondoids are thus of fundamental interest for a variety of emerging applications. This paper presents the effects of thiol substitution position and polymantane order on diamondoid SAMs on gold using near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and X-ray photoelectron spectroscopy (XPS). A framework to determine both molecular tilt and twist through NEXAFS is presented and reveals highly ordered diamondoid SAMs, with the molecular orientation controlled by the thiol location. C 1s and S 2p binding energies are lower in adamantane thiol than alkane thiols on gold by 0.67 +/- 0.05 and 0.16 +/- 0.04 eV, respectively. These binding energies vary with diamondoid monolayer structure and thiol substitution position, consistent with different degrees of steric strain and electronic interaction with the substrate. This work demonstrates control over the assembly, in particular the orientational and electronic structure, providing a flexible design of surface properties with this exciting new class of diamond nanoparticles.

    View details for DOI 10.1021/ja711131e

    View details for Web of Science ID 000258293800038

    View details for PubMedID 18642809

  • Interfacial effects in thin films of polymeric semiconductors JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B Rivnay, J., Jimison, L. H., Toney, M. F., Preiner, M., Melosh, N. A., Salleo, A. 2008; 26 (4): 1454-1460

    View details for DOI 10.1116/1.2952454

    View details for Web of Science ID 000258494400036

  • Electronically activated actin protein polymerization and alignment JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Wong, I. Y., Footer, M. J., Melosh, N. A. 2008; 130 (25): 7908-7915

    Abstract

    Biological systems are the paragon of dynamic self-assembly, using a combination of spatially localized protein complexation, ion concentration, and protein modification to coordinate a diverse set of self-assembling components. Biomimetic materials based upon biologically inspired design principles or biological components have had some success at replicating these traits, but have difficulty capturing the dynamic aspects and diversity of biological self-assembly. Here, we demonstrate that the polymerization of ion-sensitive proteins can be dynamically regulated using electronically enhanced ion mixing and monomer concentration. Initially, the global activity of the cytoskeletal protein actin is inhibited using a low-ionic strength buffer that minimizes ion complexation and protein-protein interactions. Nucleation and growth of actin filaments are then triggered by a low-frequency AC voltage, which causes local enhancement of the actin monomer concentration and mixing with Mg(2+). The location and extent of polymerization are governed by the voltage and frequency, producing highly ordered structures unprecedented in bulk experiments. Polymerization rate and filament orientation could be independently controlled using a combination of low-frequency (approximately 100 Hz) and high frequency (1 MHz) AC voltages, creating a range of macromolecular architectures from network hydrogel microparticles to highly aligned arrays of actin filaments with approximately 750 nm periodicity. Since a wide range of proteins are activated upon complexation with charged species, this approach may be generally applicable to a variety of biopolymers and proteins.

    View details for DOI 10.1021/ja7103284

    View details for Web of Science ID 000256962000042

    View details for PubMedID 18507467

  • Creating large area molecular electronic junctions using atomic layer deposition APPLIED PHYSICS LETTERS Preiner, M. J., Melosh, N. A. 2008; 92 (21)

    View details for DOI 10.1063/1.2917870

    View details for Web of Science ID 000256303500073

  • A nonvolatile plasmonic switch employing photochromic molecules NANO LETTERS Pala, R. A., Shimizu, K. T., Melosh, N. A., Brongersma, M. L. 2008; 8 (5): 1506-1510

    Abstract

    We demonstrate a surface plasmon-polariton (SPP) waveguide all-optical switch that combines the unique physical properties of small molecules and metallic (plasmonic) nanostructures. The switch consists of a pair of gratings defined in an aluminum film coated with a 65 nm thick layer of photochromic (PC) molecules. The first grating couples a signal beam consisting of free space photons to SPPs that interact effectively with the PC molecules. These molecules can reversibly be switched between transparent and absorbing states using a free space optical pump. In the transparent (signal "on") state, the SPPs freely propagate through the molecular layer, and in the absorbing (signal "off") state, the SPPs are strongly attenuated. The second grating serves to decouple the SPPs back into a free space optical beam, enabling measurement of the modulated signal with a far-field detector. In a preliminary study, the switching behavior of the PC molecules themselves was confirmed and quantified by surface plasmon resonance spectroscopy. The excellent (16%) overlap of the SPP mode profile with the thin layer of switching molecules enabled efficient switching with power densities of approximately 6.0 mW/cm2 in 1.5 microm x 8 microm devices, resulting in plasmonic switching powers of 0.72 nW per device. Calculations further showed that modulation depths in access of 20 dB can easily be attained in optimized designs. The quantitative experimental and theoretical analysis of the nonvolatile switching behavior in this letter guides the design of future nanoscale optically or electrically pumped optical switches.

    View details for DOI 10.1021/nl0808839

    View details for Web of Science ID 000255906400042

    View details for PubMedID 18412401

  • Efficient optical coupling into metal-insulator-metal plasmon modes with subwavelength diffraction gratings APPLIED PHYSICS LETTERS Preiner, M. J., Shimizu, K. T., White, J. S., Melosh, N. A. 2008; 92 (11)

    View details for DOI 10.1063/1.2898509

    View details for Web of Science ID 000254292400085

  • Suspension of nanoparticles in SU-8: Processing and characterization of nanocomposite polymers European Nano System Conference (ENS '05) Chiamori, H. C., Brown, J. W., Adhiprakasha, E. V., Hantsoo, E. T., Straalsund, J. B., Melosh, N. A., Pruitt, B. L. ELSEVIER SCI LTD. 2008: 228–36
  • Diamondoids as low-kappa dielectric materials Applied Physics Letters Clay, W., A., Sasagawa, T., Kelly, M., Dahl, J., E., Carlson, R., M.K., Melosh, N. 2008; 93: 172901
  • Efficient optical coupling into metal-insulator-metal plasmon modes with subwavelength diffraction gratings Applied Physics Letters Preiner, M., J., Shimizu, K., T., White, J., S., Melosh, N., A. 2008; 92: 113109-1-3
  • Creating large area molecular electronic junctions using atomic layer deposition Applied Physics Letters Preiner, M., J., Melosh, N., A. 2008; 92
  • Lipid bilayer deposition and patterning via air bubble collapse LANGMUIR Mager, M. D., Melosh, N. A. 2007; 23 (18): 9369-9377

    Abstract

    We report a new method for forming patterned lipid bilayers on solid substrates. In bubble collapse deposition (BCD), an air bubble is first "inked" with a monolayer of phospholipid molecules and then touched to the surface of a thermally oxidized silicon wafer and the air is slowly withdrawn. As the bubble shrinks, the lipid monolayer pressure increases. Once the monolayer exceeds the collapse pressure, it folds back on itself, depositing a stable lipid bilayer on the surface. These bilayer disks have lateral diffusion coefficients consistent with high quality supported bilayers. By sequentially depositing bilayers in overlapping areas, fluid connections between bilayers of different compositions are formed. Performing vesicle rupture on the open substrate surrounding this bilayer patch results in a fluid but spatially isolated bilayer. Very little intermixing was observed between the vesicle rupture and bubble-deposited bilayers.

    View details for DOI 10.1021/la701372b

    View details for Web of Science ID 000248886700037

    View details for PubMedID 17683151

  • COLL 108-Lateral fusion of lipid membranes to nanoscale functionalized posts Almquist, B. D., Melosh, N. A. AMER CHEMICAL SOC. 2007
  • BIOT 53-Nanoscale reservoirs for spatially and temporally controlled biointerfaces Melosh, N. A., VanDersarl, J. J., Hagar-Barnard, E., Yenilmez, E. AMER CHEMICAL SOC. 2007
  • Monochromatic electron photoemission from diamondoid monolayers SCIENCE Yang, W. L., Fabbri, J. D., Willey, T. M., Lee, J. R., Dahl, J. E., Carlson, R. M., Schreiner, P. R., Fokin, A. A., Tkachenko, B. A., Fokina, N. A., Meevasana, W., Mannella, N., Tanaka, K., Zhou, X. J., van Buuren, T., Kelly, M. A., Hussain, Z., Melosh, N. A., Shen, Z. 2007; 316 (5830): 1460-1462

    Abstract

    We found monochromatic electron photoemission from large-area self-assembled monolayers of a functionalized diamondoid, [121]tetramantane-6-thiol. Photoelectron spectra of the diamondoid monolayers exhibited a peak at the low-kinetic energy threshold; up to 68% of all emitted electrons were emitted within this single energy peak. The intensity of the emission peak is indicative of diamondoids being negative electron affinity materials. With an energy distribution width of less than 0.5 electron volts, this source of monochromatic electrons may find application in technologies such as electron microscopy, electron beam lithography, and field-emission flat-panel displays.

    View details for DOI 10.1126/science.1141811

    View details for PubMedID 17556579

  • Dynamic control of biomolecular activity using electrical interfaces. Soft matter Wong, I. Y., Footer, M. J., Melosh, N. A. 2007; 3 (3): 267-274

    Abstract

    The development of novel interfaces between electronic devices and biological systems is a rapidly evolving research area that may lead to new insights into biological behavior, clinical diagnostics and therapeutic treatments. Full electrical integration into biological networks will require bioactuators which can translate an electrical pulse into a specific biochemical signal the system can understand. One approach has been the use of electrostatic fields near the surface of an electrode to locally alter the ionic and electrostatic environment within an ionic double layer. In this scheme, normally active biological macromolecules are suspended in a 'low-salt buffer' that is depleted of necessary ions, such as Mg2+, rendering them inactive. Upon application of an electrical potential these ions are concentrated at the electrode surface, locally activating biomolecular function. An initial demonstration of this method is presented for the dynamic polymerization of actin filaments from electrode surfaces. In principle, electrodes functionalized with different proteins could be individually activated to translate an electrical potential into a specific biochemical signal or behavior.

    View details for DOI 10.1039/b607279h

    View details for PubMedID 32900143

  • Dynamic control of biomolecular activity using electrical interfaces SOFT MATTER Wong, I. Y., Footer, M. J., Melosh, N. A. 2007; 3 (3): 267-274

    View details for DOI 10.1039/b607279h

    View details for Web of Science ID 000246006700003

  • Monochromatic Electron Emission from Negative Electron Affinity Diamondoid Monolayers Science Yang, W., L., Fabbri, J., D., Willey, T., M., Lee, J., R.I., Dahl, J., E., Carlson, R., M.K., Melosh, Nicholas, A. 2007; 315: 1460-1462
  • Probing molecular junctions using surface plasmon resonance spectroscopy NANO LETTERS Shimizu, K. T., Pala, R. A., Fabbri, J. D., Brongersma, M. L., Melosh, N. A. 2006; 6 (12): 2797-2803

    Abstract

    The optical absorption spectra of nanometer-thick organic films and molecular monolayers sandwiched between two metal contacts have been measured successfully using surface plasmon resonance spectroscopy (SPRS). The electric field within metal-insulator (organic)-metal (MIM) cross-bar junctions created by surface plasmon-polaritons excited on the metal surface allows sensitive measurement of molecular optical properties. Specifically, this spectroscopic technique extracts the real and imaginary indices of the organic layer for each wavelength of interest. The SPRS sensitivity was calculated for several device architectures, metals, and layer thicknesses to optimize the organic film absorptivity measurements. Distinct optical absorption features were clearly observed for R6G layers as thin as a single molecular monolayer between two metal electrodes. This method also enables dynamic measurement of molecular conformation inside metallic junctions, as shown by following the optical switching of a thin spiropyran/polymer film upon exposure to UV light. Finally, optical and electrical measurements can be made simultaneously to study the effect of electrical bias and current on molecular conformation, which may have significant impact in areas such as molecular and organic electronics.

    View details for DOI 10.1021/nl061893h

    View details for Web of Science ID 000242786500029

    View details for PubMedID 17163708

  • Soft deposition of large-area metal contacts for molecular electronics ADVANCED MATERIALS Shimizu, K. T., Fabbri, J. D., Jelincic, J. J., Melosh, N. A. 2006; 18 (12): 1499-?
  • Soft Deposition of Large Area Metal Contacts for Molecular Electronics Advanced Materials Shimizu, K., T., Fabbri, J., D., Jelincic, J., J., Melosh, N., A. 2006; 18: 1499-1504
  • Probing molecular junctions using surface plasmon resonance spectroscopy Nano Letters Shimizu, K., T., Pala, R., A., Fabbri, J., D., Brongersma, M., L., Melosh, N., A. 2006; 6: 2797-2803
  • Silicon chip-based patch-clamp electrodes integrated with PDMS microfluidics 49th Annual Meeting of the Biophysical-Society Nagarah, J. M., Wang, P., Luo, Y., Pantoja, R., Melosh, N. A., Starace, D. M., Blunk, R., Bezanilla, F., Heath, J. R. CELL PRESS. 2005: 522A–522A
  • Fabrication of conducting Si nanowire arrays JOURNAL OF APPLIED PHYSICS Beckman, R. A., Johnston-Halperin, E., Melosh, N. A., Luo, Y., Green, J. E., Heath, J. R. 2004; 96 (10): 5921-5923

    View details for DOI 10.1063/1.1801155

    View details for Web of Science ID 000224926000089

  • Silicon chip-based patch-clamp electrodes integrated with PDMS microfluidics BIOSENSORS & BIOELECTRONICS Pantoja, R., Nagarah, J. M., Starace, D. M., Melosh, N. A., Blunck, R., Bezanilla, F., Heath, J. R. 2004; 20 (3): 509-517

    Abstract

    We report on a silicon wafer-based device that can be used for recording macroscopic ion channel protein activities across a diverse group of cell-types. Gigaohm seals were achieved for CHO-K1 and RIN m5F cells, and both cell-attached and whole-cell mode configurations were also demonstrated. Two distinct intrinsic potassium ion channels were recorded in whole-cell mode for HIT-T15 and RAW 264.7 cells. Polydimethylsiloxane (PDMS) microfluidics were also coupled with the micromachined silicon chips in order to demonstrate that a single cell could be selectively directed to a micropore, and membrane protein currents could subsequently be recorded. These silicon chip-based devices have significant advantages over traditional micropipette approaches, and may serve as combinatorial tools for investigating membrane biophysics, pharmaceutical screening, and other bio-sensing tasks.

    View details for DOI 10.1016/j.bios.2004.02.020

    View details for Web of Science ID 000225009000016

    View details for PubMedID 15494233

  • Ultrahigh-density nanowire lattices and circuits SCIENCE Melosh, N. A., Boukai, A., Diana, F., Gerardot, B., Badolato, A., Petroff, P. M., Heath, J. R. 2003; 300 (5616): 112-115

    Abstract

    We describe a general method for producing ultrahigh-density arrays of aligned metal and semiconductor nanowires and nanowire circuits. The technique is based on translating thin film growth thickness control into planar wire arrays. Nanowires were fabricated with diameters and pitches (center-to-center distances) as small as 8 nanometers and 16 nanometers, respectively. The nanowires have high aspect ratios (up to 10(6)), and the process can be carried out multiple times to produce simple circuits of crossed nanowires with a nanowire junction density in excess of 10(11) per square centimeter. The nanowires can also be used in nanomechanical devices; a high-frequency nanomechanical resonator is demonstrated.

    View details for DOI 10.1126/science.1081940

    View details for Web of Science ID 000181988900043

    View details for PubMedID 12637672

  • Ultrahigh-density nanowire lattices and circuits Science Melosh, N., A., Boukai, A., Diana, F., Gerardot, B., Badolato, A., Petroff, P., M. 2003; 300: 112-15
  • Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores Science Zhao, D., Y., Feng, J., L., Huo, Q., S., Melosh, N., Fredrickson, G., H., Chmelka, B., F. 1998; 279: 548-552