Honors & Awards
HFSP Postdoctoral Fellowship, Human Frontier Science Program (07/01/2021)
NSERC Postdoctoral Fellow, Natural Sciences and Engineering Research Council of Canada (04/01/2021)
Bachelor of Science, McMaster University (2013)
Doctor of Philosophy, University of Toronto (2019)
Endothelialized collagen based pseudo-islets enables tuneable subcutaneous diabetes therapy
2020; 232: 119710
Pancreatic islets are fragile cell clusters and many isolated islets are not suitable for transplantation. Furthermore, following transplantation, islets will experience a state of hypoxia and poor nutrient diffusion before revascularization, which is detrimental to islet survival; this is affected by islet size and health. Here we engineered tuneable size-controlled pseudo-islets created by dispersing de-aggregated islets in an endothelialized collagen scaffold. This supported subcutaneous engraftment, which returned streptozotocin-induced diabetic mice to normoglycemia. Whole-implant imaging after tissue clearing demonstrated pseudo-islets regenerated their vascular architecture and insulin-secreting β-cells were within 5 μm of a perfusable vessel - a feature unique to this approach. By using an endothelialized collagen scaffold, this work highlights a novel "bottom-up" approach to islet engineering that provides control over the size and composition of the constructs, while enabling the critical ability to revascularize and engraft when transplanted into the clinically useful subcutaneous space.
View details for DOI 10.1016/j.biomaterials.2019.119710
View details for Web of Science ID 000514748200021
View details for PubMedID 31901691
A scalable device-less biomaterial approach for subcutaneous islet transplantation
View details for DOI 10.1016/j.biomaterials.2020.120499
Modular tissue engineering for the vascularization of subcutaneously transplanted pancreatic islets
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2017; 114 (35): 9337–42
The transplantation of pancreatic islets, following the Edmonton Protocol, is a promising treatment for type I diabetics. However, the need for multiple donors to achieve insulin independence reflects the large loss of islets that occurs when islets are infused into the portal vein. Finding a less hostile transplantation site that is both minimally invasive and able to support a large transplant volume is necessary to advance this approach. Although the s.c. site satisfies both these criteria, the site is poorly vascularized, precluding its utility. To address this problem, we demonstrate that modular tissue engineering results in an s.c. vascularized bed that enables the transplantation of pancreatic islets. In streptozotocin-induced diabetic SCID/beige mice, the injection of 750 rat islet equivalents embedded in endothelialized collagen modules was sufficient to restore and maintain normoglycemia for 21 days; the same number of free islets was unable to affect glucose levels. Furthermore, using CLARITY, we showed that embedded islets became revascularized and integrated with the host's vasculature, a feature not seen in other s.c.Collagen-embedded islets drove a small (albeit not significant) shift toward a proangiogenic CD206+MHCII-(M2-like) macrophage response, which was a feature of module-associated vascularization. While these results open the potential for using s.c. islet delivery as a treatment option for type I diabetes, the more immediate benefit may be for the exploration of revascularized islet biology.
View details for DOI 10.1073/pnas.1619216114
View details for Web of Science ID 000408536000043
View details for PubMedID 28814629
View details for PubMedCentralID PMC5584405
Endothelialized collagen modules for islet tissue engineering
Transplantation, Bioengineering, and Regeneration of the Endocrine Pancreas
Elsevier Inc.. 2019: 277–287
View details for DOI https://doi.org/10.1016/B978-0-12-814831-0.00020-8
- Interpenetrating Alginate-Collagen Polymer Network Microspheres for Modular Tissue Engineering ACS BIOMATERIALS SCIENCE & ENGINEERING 2018; 4 (11): 3704–12
- Muted fibrosis from protected islets NATURE BIOMEDICAL ENGINEERING 2018; 2 (11): 791–92
Interpenetrating Alginate-Collagen Polymer Network Microspheres for Modular Tissue Engineering.
ACS biomaterials science & engineering
2018; 4 (11): 3704–12
The lack of vascularization limits the creation of engineered tissue constructs with clinically relevant sizes. We pioneered a bottom-up process (modular tissue engineering) in which constructs with intrinsic vasculature were assembled from endothelialized building blocks. In this study, we prepared an interpenetrating polymer network (IPN) hydrogel from a collagen-alginate blend and evaluated its use as microspheres in modular tissue engineering. Ionotropic gelation of alginate was combined with collagen fibrillogenesis, and the resulting hydrogel was stiffer and had greater resistance to enzymatic degradation relative to that of collagen alone; the viability of embedded mesenchymal stromal cells (adMSC) was unaltered. IPN microspheres were fabricated by a coaxial air-flow technique, and an additional step of collagen coating was required to have human umbilical vein endothelial cells (HUVEC) attach and proliferate. When implanted subcutaneously in SCID/bg mice, adMSC-HUVEC microspheres promoted more blood vessels at day 7 relative to microspheres without adMSC but coated with HUVEC. Perfusion studies confirmed that these vessels were connected to the host vasculature. Fewer vessels were detected in both groups at day 21, but in adMSC-HUVEC explants, more smooth muscle cells had wrapped around vessels, and CLARITY processing of whole explants revealed a restricted leakage of blood. The capacity for rapid gelation and high throughput production are promising features for the use of these microspheres in modular tissue engineering.
View details for DOI 10.1021/acsbiomaterials.7b00356
View details for PubMedID 33429609
Injectable and inherently vascularizing semi-interpenetrating polymer network for delivering cells to the subcutaneous space
2017; 131: 27–35
Injectable hydrogels are suitable for local cell delivery to the subcutaneous space, but the lack of vasculature remains a limiting factor. Previously we demonstrated that biomaterials containing methacrylic acid promoted vascularization. Here we report the preparation of a semi-interpenetrating polymer network (SIPN), and its evaluation as an injectable carrier to deliver cells and generate blood vessels in a subcutaneous implantation site. The SIPN was prepared by reacting a blend of vinyl sulfone-terminated polyethylene glycol (PEG-VS) and sodium polymethacrylate (PMAA-Na) with dithiothreitol. The swelling of SIPN was sensitive to the PMAA-Na content but only small differences in gelation time, permeability and stiffness were noted. SIPN containing 20 mol% PMAA-Na generated a vascular network in the surrounding tissues, with 2-3 times as many vessels as was obtained with 10 mol% PMAA-Na or PEG alone. Perfusion studies showed that the generated vessels were perfused and connected to the host vasculature as early as seven days after transplantation. Islets embedded in SIPN were viable and responsive to glucose stimulation in vitro. In a proof of concept study in a streptozotocin-induced diabetic mouse model, a progressive return to normoglycemia was observed and the presence of insulin positive islets was confirmed when islets were embedded in SIPN prior to delivery. Our approach proposes a biomaterial-mediated strategy to deliver cells while enhancing vascularization.
View details for DOI 10.1016/j.biomaterials.2017.03.032
View details for Web of Science ID 000401393600003
View details for PubMedID 28371625
Using Del-1 to Tip the Angiogenic Balance in Endothelial Cells in Modular Constructs
TISSUE ENGINEERING PART A
2014; 20 (7-8): 1222–34
Modular tissue engineering is a method of building vascularized tissue-engineered constructs. Submillimeter-sized collagen pieces (modules) coated with a layer of endothelial cells (EC; vascular component), and with embedded functional cells, are self-assembled into a larger, three-dimensional tissue. In this study, we examined the use of developmental endothelial locus-1 (Del-1), an extracellular matrix protein with proangiogenic properties, as a means of tipping the angiogenic balance in human umbilical vein endothelial cells incorporated in modular tissue-engineered constructs. The motivation was to enhance the vascularization of these constructs upon transplantation in vivo, in this case, without the use of exogenous mesenchymal stromal cells. EC were transduced using a lentiviral construct to overexpress Del-1. The Del-1 EC formed more sprouts in a fibrin gel sprouting assay in vitro compared with eGFP (control) transduced EC, as expected. Del-1 EC had a distinct profile of gene expression (upregulation of matrix metalloproteinase-9 [MMP-9], urokinase-type plasminogen activator [uPA/PLAU], vascular endothelial growth factor [VEGF-A], and intercellular adhesion molecule-1 [ICAM-1]; downregulation of angiopoietin-2 [Ang2]), also supporting the notion of "tipping the angiogenic balance". On the other hand, contrary to our expectations, when Del-1 EC-coated modules were implanted subcutaneously in a severe combined immunodeficient/beige animal model, the proangiogenic effect of Del-1 was less remarkable. There was only a small increase in the number of blood vessels formed in Del-1 implants compared with the eGFP implants, and only few blood vessels formed at the implant site in both cases. This was presumed due to limited EC survival after transplantation. We speculate that if we could improve EC survival in our study (for example, by adding other prosurvival factors or supporting cells), we would see a greater Del-1-induced angiogenic benefit in vivo as a consequence of increased Del-1 secretion by a higher number of surviving cells.
View details for DOI 10.1089/ten.tea.2013.0241
View details for Web of Science ID 000334110000011
View details for PubMedID 24138448
View details for PubMedCentralID PMC3993075