Bio
C. Karen Liu is a professor in the Computer Science Department at Stanford University. Prior to joining Stanford, Liu was a faculty member at the School of Interactive Computing at Georgia Tech. She received her Ph.D. degree in Computer Science from the University of Washington. Liu's research interests are in computer graphics and robotics, including physics-based animation, character animation, optimal control, reinforcement learning, and computational biomechanics. She developed computational approaches to modeling realistic and natural human movements, learning complex control policies for humanoids and assistive robots, and advancing fundamental numerical simulation and optimal control algorithms. The algorithms and software developed in her lab have fostered interdisciplinary collaboration with researchers in robotics, computer graphics, mechanical engineering, biomechanics, neuroscience, and biology. Liu received a National Science Foundation CAREER Award, an Alfred P. Sloan Fellowship, and was named Young Innovators Under 35 by Technology Review. In 2012, Liu received the ACM SIGGRAPH Significant New Researcher Award for her contribution in the field of computer graphics.
Academic Appointments
-
Professor, Computer Science
-
Member, Bio-X
-
Faculty Affiliate, Institute for Human-Centered Artificial Intelligence (HAI)
Honors & Awards
-
ACM SIGGRAPH Academy, ACM (2021)
-
SIGGRAPH Significant New Research Award, ACM (2012)
-
Alfred P. Sloan Research Fellowship, Alfred P. Sloan Foundation (2010)
-
Young Innovators Under 35, MIT Technology Review (2007)
-
CAREER Award, National Science Foundation (2007)
Professional Education
-
BS, National Taiwan University, Computer Science (1999)
-
MS, University of Washington, Computer Science (2001)
-
PhD, University of Washington, Computer Science (2005)
2024-25 Courses
- A Hands-On Introduction to Building AI-Enabled Robots
CS 123 (Aut, Spr) - Fundamentals of Computer Graphics: Animation and Simulation
CS 248B (Aut) -
Independent Studies (15)
- Advanced Reading and Research
CS 499 (Aut, Win, Spr, Sum) - Advanced Reading and Research
CS 499P (Aut, Win, Spr, Sum) - Curricular Practical Training
CS 390A (Aut, Win, Spr, Sum) - Curricular Practical Training
CS 390B (Aut, Sum) - Curricular Practical Training
CS 390C (Aut, Win, Spr, Sum) - Directed Investigation
BIOE 392 (Aut, Win, Spr, Sum) - Directed Study
BIOE 391 (Aut, Win, Spr, Sum) - Independent Project
CS 399 (Aut, Win, Spr, Sum) - Independent Project
CS 399P (Aut, Win, Spr, Sum) - Independent Work
CS 199 (Aut, Win, Spr, Sum) - Independent Work
CS 199P (Aut, Win, Spr, Sum) - Part-time Curricular Practical Training
CS 390D (Aut, Win, Spr, Sum) - Senior Project
CS 191 (Aut, Win, Spr, Sum) - Supervised Undergraduate Research
CS 195 (Aut, Win, Spr, Sum) - Writing Intensive Senior Research Project
CS 191W (Aut, Win, Spr)
- Advanced Reading and Research
-
Prior Year Courses
2023-24 Courses
- A Hands-On Introduction to Building AI-Enabled Robots
CS 123 (Aut) - Computer Graphics in the Era of AI
CS 348I (Win) - Fundamentals of Computer Graphics: Animation and Simulation
CS 248B (Aut)
2022-23 Courses
- Character Animation: Modeling, Simulation, and Control of Human Motion
CS 348E (Spr) - Fundamentals of Computer Graphics: Animation and Simulation
CS 248B (Aut)
2021-22 Courses
- Character Animation: Modeling, Simulation, and Control of Human Motion
CS 348E (Spr) - Computer Graphics in the Era of AI
CS 348I (Aut)
- A Hands-On Introduction to Building AI-Enabled Robots
Stanford Advisees
-
Doctoral Dissertation Reader (AC)
Kaylee Burns, Claire Chen, Rianna Jitosho, Sarah Jobalia, Krishnan Srinivasan, Qingqing Zhao -
Postdoctoral Faculty Sponsor
Yao Feng, Pei Xu, Yufei Ye -
Doctoral Dissertation Advisor (AC)
Ken Wang, Keenon Werling -
Master's Program Advisor
Ariel Chen, Jaden Clark, Katie Dektar, Felicity Huang, Vijay Josephs, Ishan Khare, Hannah Kim, Yoonju Kim, Heather Szczesniak, Mia Tang, Naomi Tefera, Zhen Wu -
Doctoral Dissertation Co-Advisor (AC)
Haochen Shi, Sofia Wyetzner -
Doctoral Dissertation Co-Advisor (NonAC)
Chen Wang -
Doctoral (Program)
Joao Araujo, Sirui Chen, Michelle Guo, Jiaman Li, Tyler Lum, Takara Truong, Ruocheng Wang, Keenon Werling, Albert Wu
All Publications
-
A simulation framework to determine optimal strength training and musculoskeletal geometry for sprinting and distance running.
PLoS computational biology
2024; 20 (2): e1011410
Abstract
Musculoskeletal geometry and muscle volumes vary widely in the population and are intricately linked to the performance of tasks ranging from walking and running to jumping and sprinting. As an alternative to experimental approaches, where it is difficult to isolate factors and establish causal relationships, simulations can be used to independently vary musculoskeletal geometry and muscle volumes, and develop a fundamental understanding. However, our ability to understand how these parameters affect task performance has been limited due to the high computational cost of modelling the necessary complexity of the musculoskeletal system and solving the requisite multi-dimensional optimization problem. For example, sprinting and running are fundamental to many forms of sport, but past research on the relationships between musculoskeletal geometry, muscle volumes, and running performance has been limited to observational studies, which have not established cause-effect relationships, and simulation studies with simplified representations of musculoskeletal geometry. In this study, we developed a novel musculoskeletal simulator that is differentiable with respect to musculoskeletal geometry and muscle volumes. This simulator enabled us to find the optimal body segment dimensions and optimal distribution of added muscle volume for sprinting and marathon running. Our simulation results replicate experimental observations, such as increased muscle mass in sprinters, as well as a mass in the lower end of the healthy BMI range and a higher leg-length-to-height ratio in marathon runners. The simulations also reveal new relationships, for example showing that hip musculature is vital to both sprinting and marathon running. We found hip flexor and extensor moment arms were maximized to optimize sprint and marathon running performance, and hip muscles the main target when we simulated strength training for sprinters. Our simulation results provide insight to inspire future studies to examine optimal strength training. Our simulator can be extended to other athletic tasks, such as jumping, or to non-athletic applications, such as designing interventions to improve mobility in older adults or individuals with movement disorders.
View details for DOI 10.1371/journal.pcbi.1011410
View details for PubMedID 38394308
-
Lower-Limb Exoskeletons Appeal to Both Clinicians and Older Adults, Especially for Fall Prevention and Joint Pain Reduction.
IEEE transactions on neural systems and rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society
2024; 32: 1577-1585
Abstract
Exoskeletons are a burgeoning technology with many possible applications to improve human life; focusing the effort of exoskeleton research and development on the most important features is essential for facilitating adoption and maximizing positive societal impact. To identify important focus areas for exoskeleton research and development, we conducted a survey with 154 potential users (older adults) and another survey with 152 clinicians. The surveys were conducted online and to ensure a consistent concept of an exoskeleton across respondents, an image of a hip exoskeleton was shown during exoskeleton-related prompts. The survey responses indicate that both older adults and clinicians are open to using exoskeletons, fall prevention and joint pain reduction are especially important features, and users are likely to wear an exoskeleton in the scenarios when it has the greatest opportunity to help prevent a fall. These findings can help inform future exoskeleton research and guide the development of devices that are accepted, used, and provide meaningful benefit to users.
View details for DOI 10.1109/TNSRE.2024.3381979
View details for PubMedID 38536680
-
Object Motion Guided Human Motion Synthesis
ACM TRANSACTIONS ON GRAPHICS
2023; 42 (6)
View details for DOI 10.1145/3618333
View details for Web of Science ID 001139790400025
-
From Skin to Skeleton: Towards Biomechanically Accurate 3D Digital Humans
ACM TRANSACTIONS ON GRAPHICS
2023; 42 (6)
View details for DOI 10.1145/3618381
View details for Web of Science ID 001139790400081
-
AddBiomechanics: Automating model scaling, inverse kinematics, and inverse dynamics from human motion data through sequential optimization.
PloS one
2023; 18 (11): e0295152
Abstract
Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subject's skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2 cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.
View details for DOI 10.1371/journal.pone.0295152
View details for PubMedID 38033114
-
AddBiomechanics: Automating model scaling, inverse kinematics, and inverse dynamics from human motion data through sequential optimization.
bioRxiv : the preprint server for biology
2023
Abstract
Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subjecťs skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.
View details for DOI 10.1101/2023.06.15.545116
View details for PubMedID 37398034
View details for PubMedCentralID PMC10312696
-
Simulating the effect of ankle plantarflexion and inversion-eversion exoskeleton torques on center of mass kinematics during walking.
PLoS computational biology
2023; 19 (8): e1010712
Abstract
Walking balance is central to independent mobility, and falls due to loss of balance are a leading cause of death for people 65 years of age and older. Bipedal gait is typically unstable, but healthy humans use corrective torques to counteract perturbations and stabilize gait. Exoskeleton assistance could benefit people with neuromuscular deficits by providing stabilizing torques at lower-limb joints to replace lost muscle strength and sensorimotor control. However, it is unclear how applied exoskeleton torques translate to changes in walking kinematics. This study used musculoskeletal simulation to investigate how exoskeleton torques applied to the ankle and subtalar joints alter center of mass kinematics during walking. We first created muscle-driven walking simulations using OpenSim Moco by tracking experimental kinematics and ground reaction forces recorded from five healthy adults. We then used forward integration to simulate the effect of exoskeleton torques applied to the ankle and subtalar joints while keeping muscle excitations fixed based on our previous tracking simulation results. Exoskeleton torque lasted for 15% of the gait cycle and was applied between foot-flat and toe-off during the stance phase, and changes in center of mass kinematics were recorded when the torque application ended. We found that changes in center of mass kinematics were dependent on both the type and timing of exoskeleton torques. Plantarflexion torques produced upward and backward changes in velocity of the center of mass in mid-stance and upward and smaller forward velocity changes near toe-off. Eversion and inversion torques primarily produced lateral and medial changes in velocity in mid-stance, respectively. Intrinsic muscle properties reduced kinematic changes from exoskeleton torques. Our results provide mappings between ankle plantarflexion and inversion-eversion torques and changes in center of mass kinematics which can inform designers building exoskeletons aimed at stabilizing balance during walking. Our simulations and software are freely available and allow researchers to explore the effects of applied torques on balance and gait.
View details for DOI 10.1371/journal.pcbi.1010712
View details for PubMedID 37549183
-
Hierarchical Planning and Control for Box Loco-Manipulation
PROCEEDINGS OF THE ACM ON COMPUTER GRAPHICS AND INTERACTIVE TECHNIQUES
2023; 6 (3)
View details for DOI 10.1145/3606931
View details for Web of Science ID 001059100600013
-
Anatomically Detailed Simulation of Human Torso
ACM TRANSACTIONS ON GRAPHICS
2023; 42 (4)
View details for DOI 10.1145/3592425
View details for Web of Science ID 001044671300006
-
Trajectory and Sway Prediction Towards Fall Prevention.
IEEE International Conference on Robotics and Automation : ICRA : [proceedings]. IEEE International Conference on Robotics and Automation
2023; 2023: 10483-10489
Abstract
Falls are the leading cause of fatal and non-fatal injuries, particularly for older persons. Imbalance can result from the body's internal causes (illness), or external causes (active or passive perturbation). Active perturbation results from applying an external force to a person, while passive perturbation results from human motion interacting with a static obstacle. This work proposes a metric that allows for the monitoring of the persons torso and its correlation to active and passive perturbations. We show that large changes in the torso sway can be strongly correlated to active perturbations. We also show that we can reasonably predict the future path and expected change in torso sway by conditioning the expected path and torso sway on the past trajectory, torso motion, and the surrounding scene. This could have direct future applications to fall prevention. Results demonstrate that the torso sway is strongly correlated with perturbations. And our model is able to make use of the visual cues presented in the panorama and condition the prediction accordingly.
View details for DOI 10.1109/icra48891.2023.10161361
View details for PubMedID 38009123
View details for PubMedCentralID PMC10671274
-
On Designing a Learning Robot: Improving Morphology for Enhanced Task Performance and Learning
IEEE. 2023: 487-494
View details for DOI 10.1109/IROS55552.2023.10341905
View details for Web of Science ID 001133658800052
- Reinforcement Learning Enables Real-Time Planning and Control of Agile Maneuvers for Soft Robot Arms Conference on Robot Learning (CoRL) 2023
- DROP: Dynamics Responses from Human Motion Prior and Projective Dynamics ACM SIGGRAPH 2023
-
Synthesizing Dexterous Nonprehensile Pregrasp for Ungraspable Objects
ASSOC COMPUTING MACHINERY. 2023
View details for DOI 10.1145/3588432.3591528
View details for Web of Science ID 001117690500010
-
EDGE: Editable Dance Generation From Music
IEEE COMPUTER SOC. 2023: 448-458
View details for DOI 10.1109/CVPR52729.2023.00051
View details for Web of Science ID 001058542600043
-
<i>NeMo</i>: 3D <i>Ne</i>ural <i>Mo</i>tion Fields from Multiple Video Instances of the Same Action
IEEE COMPUTER SOC. 2023: 22129-22138
View details for DOI 10.1109/CVPR52729.2023.02119
View details for Web of Science ID 001062531306044
-
Ego-Body Pose Estimation via Ego-Head Pose Estimation
IEEE COMPUTER SOC. 2023: 17142-17151
View details for DOI 10.1109/CVPR52729.2023.01644
View details for Web of Science ID 001062531301043
-
CIRCLE: Capture In Rich Contextual Environments
IEEE COMPUTER SOC. 2023: 21211-21221
View details for DOI 10.1109/CVPR52729.2023.02032
View details for Web of Science ID 001062531305053
- Sequential Dexterity: Chaining Dexterous Policies for Long-Horizon Manipulation Conference on Robot Learning (CoRL) 2023
-
Characterizing Multidimensional Capacitive Servoing for Physical Human-Robot Interaction
IEEE TRANSACTIONS ON ROBOTICS
2022
View details for DOI 10.1109/TRO.2022.3190217
View details for Web of Science ID 000836673100001
-
A Survey on Reinforcement Learning Methods in Character Animation
WILEY. 2022: 613-639
View details for DOI 10.1111/cgf.14504
View details for Web of Science ID 000802723900045
-
Learning to Navigate Sidewalks in Outdoor Environments
IEEE ROBOTICS AND AUTOMATION LETTERS
2022; 7 (2): 3906-3913
View details for DOI 10.1109/LRA.2022.3145947
View details for Web of Science ID 000756831900035
-
DCL: Differential Contrastive Learning for Geometry-Aware Depth Synthesis
IEEE ROBOTICS AND AUTOMATION LETTERS
2022; 7 (2): 4845-4852
View details for DOI 10.1109/LRA.2022.3148788
View details for Web of Science ID 000766627200001
- Task-Specific Design Optimization and Fabrication for Inflated-Beam Soft Robots with Growable Discrete Joints IEEE International Conference on Robotics and Automation (ICRA) 2022
-
GIMO: Gaze-Informed Human Motion Prediction in Context
SPRINGER INTERNATIONAL PUBLISHING AG. 2022: 676-694
View details for DOI 10.1007/978-3-031-19778-9_39
View details for Web of Science ID 000897100100039
- ADeLA: Automatic Dense Labeling with Attention for Viewpoint Adaptation in Semantic Segmentation Conference on Computer Vision and Pattern Recognition (CVPR) 2022
- Data-Augmented Contact Model for Rigid Body Simulation Learning for Dynamics & Control Conference (L4DC) 2022
- Learning Diverse and Physically Feasible Dexterous Grasps with Generative Model and Bilevel Optimization Conference on Robot Learning (CoRL) 2022
- Transformer Inertial Poser: Real-time Human Motion Reconstruction from Sparse IMUs with Simultaneous Terrain Generation Proceedings of SIGGRAPH Asia 2022
- BEHAVIOR-1K: A Benchmark for Embodied AI with 1,000 Everyday Activities and Realistic Simulation Conference on Robot Learning (CoRL) 2022
- Real-time Model Predictive Control and System Identification Using Differentiable Physics Simulation IEEE Robotics and Automation Letters, 2022
- Scene Synthesis from Human Motion Proceedings of ACM SIGGRAPH Asia 2022
-
Learning Human Search Behavior from Egocentric Visual Inputs
COMPUTER GRAPHICS FORUM
2021; 40 (2): 389-398
View details for DOI 10.1111/cgf.142641
View details for Web of Science ID 000657959600032
-
The Role of Physics-Based Simulators in Robotics
ANNUAL REVIEW OF CONTROL, ROBOTICS, AND AUTONOMOUS SYSTEMS, VOL 4, 2021
2021; 4: 35-58
View details for DOI 10.1146/annurev-control-072220-093055
View details for Web of Science ID 000652492900002
- Protective Policy Transfer 2021
- SimGAN: Hybrid Simulator Identification for Domain Adaptation via Adversarial Reinforcement Learning 2021
- Policy Transfer via Kinematic Domain Randomization and Adaptation 2021
- Fast and Feature-Complete Differentiable Physics for Articulated Rigid Bodies with Contact 2021
- Error-Aware Policy Learning: Zero-Shot Generalization in Partially Observable Dynamic Environments 2021
- Learning Task-Agnostic Action Spaces for Movement Optimization IEEE Transactions on Computer Graphics and Visualization 2021
- COCOI: Contact-aware Online Context Inference for Generalizable Non-planar Pushing 2021
- iGibson 2.0: Object-Centric Simulation for Robot Learning of Everyday Household Tasks 2021
- Co-GAIL Learning Diverse Strategies for Human-Robot Collaboration 2021
- BEHAVIOR: Benchmark for Everyday Household Activities in Virtual, Interactive, and Ecological Environments 2021
- DASH: Modularized Human Manipulation Simulation with Vision and Language for Embodied AI 2021
-
Learning to Manipulate Amorphous Materials
ACM TRANSACTIONS ON GRAPHICS
2020; 39 (6)
View details for DOI 10.1145/3414685.3417868
View details for Web of Science ID 000595589100029
-
Learning to Collaborate From Simulation for Robot-Assisted Dressing
IEEE ROBOTICS AND AUTOMATION LETTERS
2020; 5 (2): 2746–53
View details for DOI 10.1109/LRA.2020.2972852
View details for Web of Science ID 000526702500017
-
Visualizing Movement Control Optimization Landscapes.
IEEE transactions on visualization and computer graphics
2020; PP
Abstract
A large body of animation research focuses on optimization of movement control, either as action sequences or policy parameters. However, as closed-form expressions of the objective functions are often not available, our understanding of the optimization problems is limited. Building on recent work on analyzing neural network training, we contribute novel visualizations of high-dimensional control optimization landscapes; this yields insights into why control optimization is hard and why common practices like early termination and spline-based action parameterizations make optimization easier. For example, our experiments show how trajectory optimization can become increasingly ill-conditioned with longer trajectories, but parameterizing control as partial target states-e.g., target angles converted to torques using a PD-controller-can act as an efficient preconditioner. Both our visualizations and quantitative empirical data also indicate that neural network policy optimization scales better than trajectory optimization for long planning horizons. Our work advances the understanding of movement optimization and our visualizations should also provide value in educational use.
View details for DOI 10.1109/TVCG.2020.3018187
View details for PubMedID 32816675
-
Assistive Gym: A Physics Simulation Framework for Assistive Robotics
2020
View details for DOI 10.1109/ICRA40945.2020.9197411
-
Bodies at Rest: 3D Human Pose and Shape Estimation from a Pressure Image using Synthetic Data
IEEE. 2020: 6214–23
View details for DOI 10.1109/CVPR42600.2020.00625
View details for Web of Science ID 000620679506049
- Estimating Mass Distribution of Articulated Objects using Non-prehensile Manipulation 2020
-
Learning a Control Policy for Fall Prevention on an Assistive Walking Device
2020
View details for DOI 10.1109/ICRA40945.2020.9196798
-
Learning a Control Policy for Fall Prevention on an Assistive Walking Device
2020
View details for DOI 10.1109/ICRA40945.2020.9196798
-
Personalized collaborative plans for robot-assisted dressing via optimization and simulation
AUTONOMOUS ROBOTS
2019; 43 (8): 2183–2207
View details for DOI 10.1007/s10514-019-09865-0
View details for Web of Science ID 000487951900014
-
Synthesis of Biologically Realistic Human Motion Using Joint Torque Actuation
ACM TRANSACTIONS ON GRAPHICS
2019; 38 (4)
View details for DOI 10.1145/3306346.3322966
View details for Web of Science ID 000475740600046
-
Sim-to-Real Transfer for Biped Locomotion
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2019
View details for DOI 10.1109/IROS40897.2019.8968053
- Policy Transfer with Strategy Optimization 2019
- Multidimensional Capacitive Sensing for Robot-Assisted Dressing and Bathing 2019