Bio


C. Karen Liu is a professor in the Computer Science Department at Stanford University. Prior to joining Stanford, Liu was a faculty member at the School of Interactive Computing at Georgia Tech. She received her Ph.D. degree in Computer Science from the University of Washington. Liu's research interests are in computer graphics and robotics, including physics-based animation, character animation, optimal control, reinforcement learning, and computational biomechanics. She developed computational approaches to modeling realistic and natural human movements, learning complex control policies for humanoids and assistive robots, and advancing fundamental numerical simulation and optimal control algorithms. The algorithms and software developed in her lab have fostered interdisciplinary collaboration with researchers in robotics, computer graphics, mechanical engineering, biomechanics, neuroscience, and biology. Liu received a National Science Foundation CAREER Award, an Alfred P. Sloan Fellowship, and was named Young Innovators Under 35 by Technology Review. In 2012, Liu received the ACM SIGGRAPH Significant New Researcher Award for her contribution in the field of computer graphics.

Honors & Awards


  • ACM SIGGRAPH Academy, ACM (2021)
  • SIGGRAPH Significant New Research Award, ACM (2012)
  • Alfred P. Sloan Research Fellowship, Alfred P. Sloan Foundation (2010)
  • Young Innovators Under 35, MIT Technology Review (2007)
  • CAREER Award, National Science Foundation (2007)

Professional Education


  • BS, National Taiwan University, Computer Science (1999)
  • MS, University of Washington, Computer Science (2001)
  • PhD, University of Washington, Computer Science (2005)

2024-25 Courses


Stanford Advisees


All Publications


  • A simulation framework to determine optimal strength training and musculoskeletal geometry for sprinting and distance running. PLoS computational biology Van Wouwe, T., Hicks, J., Delp, S., Liu, K. C. 2024; 20 (2): e1011410

    Abstract

    Musculoskeletal geometry and muscle volumes vary widely in the population and are intricately linked to the performance of tasks ranging from walking and running to jumping and sprinting. As an alternative to experimental approaches, where it is difficult to isolate factors and establish causal relationships, simulations can be used to independently vary musculoskeletal geometry and muscle volumes, and develop a fundamental understanding. However, our ability to understand how these parameters affect task performance has been limited due to the high computational cost of modelling the necessary complexity of the musculoskeletal system and solving the requisite multi-dimensional optimization problem. For example, sprinting and running are fundamental to many forms of sport, but past research on the relationships between musculoskeletal geometry, muscle volumes, and running performance has been limited to observational studies, which have not established cause-effect relationships, and simulation studies with simplified representations of musculoskeletal geometry. In this study, we developed a novel musculoskeletal simulator that is differentiable with respect to musculoskeletal geometry and muscle volumes. This simulator enabled us to find the optimal body segment dimensions and optimal distribution of added muscle volume for sprinting and marathon running. Our simulation results replicate experimental observations, such as increased muscle mass in sprinters, as well as a mass in the lower end of the healthy BMI range and a higher leg-length-to-height ratio in marathon runners. The simulations also reveal new relationships, for example showing that hip musculature is vital to both sprinting and marathon running. We found hip flexor and extensor moment arms were maximized to optimize sprint and marathon running performance, and hip muscles the main target when we simulated strength training for sprinters. Our simulation results provide insight to inspire future studies to examine optimal strength training. Our simulator can be extended to other athletic tasks, such as jumping, or to non-athletic applications, such as designing interventions to improve mobility in older adults or individuals with movement disorders.

    View details for DOI 10.1371/journal.pcbi.1011410

    View details for PubMedID 38394308

  • Lower-Limb Exoskeletons Appeal to Both Clinicians and Older Adults, Especially for Fall Prevention and Joint Pain Reduction. IEEE transactions on neural systems and rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society Raitor, M., Ruggles, S. W., Delp, S. L., Liu, C. K., Collins, S. H. 2024; 32: 1577-1585

    Abstract

    Exoskeletons are a burgeoning technology with many possible applications to improve human life; focusing the effort of exoskeleton research and development on the most important features is essential for facilitating adoption and maximizing positive societal impact. To identify important focus areas for exoskeleton research and development, we conducted a survey with 154 potential users (older adults) and another survey with 152 clinicians. The surveys were conducted online and to ensure a consistent concept of an exoskeleton across respondents, an image of a hip exoskeleton was shown during exoskeleton-related prompts. The survey responses indicate that both older adults and clinicians are open to using exoskeletons, fall prevention and joint pain reduction are especially important features, and users are likely to wear an exoskeleton in the scenarios when it has the greatest opportunity to help prevent a fall. These findings can help inform future exoskeleton research and guide the development of devices that are accepted, used, and provide meaningful benefit to users.

    View details for DOI 10.1109/TNSRE.2024.3381979

    View details for PubMedID 38536680

  • From Skin to Skeleton: Towards Biomechanically Accurate 3D Digital Humans ACM TRANSACTIONS ON GRAPHICS Keller, M., Werling, K., Shin, S., Delp, S., Pujades, S., Liu, C., Black, M. J. 2023; 42 (6)

    View details for DOI 10.1145/3618381

    View details for Web of Science ID 001139790400081

  • Object Motion Guided Human Motion Synthesis ACM TRANSACTIONS ON GRAPHICS Li, J., Wu, J., Liu, C. 2023; 42 (6)

    View details for DOI 10.1145/3618333

    View details for Web of Science ID 001139790400025

  • AddBiomechanics: Automating model scaling, inverse kinematics, and inverse dynamics from human motion data through sequential optimization. PloS one Werling, K., Bianco, N. A., Raitor, M., Stingel, J., Hicks, J. L., Collins, S. H., Delp, S. L., Liu, C. K. 2023; 18 (11): e0295152

    Abstract

    Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subject's skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2 cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.

    View details for DOI 10.1371/journal.pone.0295152

    View details for PubMedID 38033114

  • AddBiomechanics: Automating model scaling, inverse kinematics, and inverse dynamics from human motion data through sequential optimization. bioRxiv : the preprint server for biology Werling, K., Bianco, N. A., Raitor, M., Stingel, J., Hicks, J. L., Collins, S. H., Delp, S. L., Liu, C. K. 2023

    Abstract

    Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subjecťs skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.

    View details for DOI 10.1101/2023.06.15.545116

    View details for PubMedID 37398034

    View details for PubMedCentralID PMC10312696

  • Simulating the effect of ankle plantarflexion and inversion-eversion exoskeleton torques on center of mass kinematics during walking. PLoS computational biology Bianco, N. A., Collins, S. H., Liu, K., Delp, S. L. 2023; 19 (8): e1010712

    Abstract

    Walking balance is central to independent mobility, and falls due to loss of balance are a leading cause of death for people 65 years of age and older. Bipedal gait is typically unstable, but healthy humans use corrective torques to counteract perturbations and stabilize gait. Exoskeleton assistance could benefit people with neuromuscular deficits by providing stabilizing torques at lower-limb joints to replace lost muscle strength and sensorimotor control. However, it is unclear how applied exoskeleton torques translate to changes in walking kinematics. This study used musculoskeletal simulation to investigate how exoskeleton torques applied to the ankle and subtalar joints alter center of mass kinematics during walking. We first created muscle-driven walking simulations using OpenSim Moco by tracking experimental kinematics and ground reaction forces recorded from five healthy adults. We then used forward integration to simulate the effect of exoskeleton torques applied to the ankle and subtalar joints while keeping muscle excitations fixed based on our previous tracking simulation results. Exoskeleton torque lasted for 15% of the gait cycle and was applied between foot-flat and toe-off during the stance phase, and changes in center of mass kinematics were recorded when the torque application ended. We found that changes in center of mass kinematics were dependent on both the type and timing of exoskeleton torques. Plantarflexion torques produced upward and backward changes in velocity of the center of mass in mid-stance and upward and smaller forward velocity changes near toe-off. Eversion and inversion torques primarily produced lateral and medial changes in velocity in mid-stance, respectively. Intrinsic muscle properties reduced kinematic changes from exoskeleton torques. Our results provide mappings between ankle plantarflexion and inversion-eversion torques and changes in center of mass kinematics which can inform designers building exoskeletons aimed at stabilizing balance during walking. Our simulations and software are freely available and allow researchers to explore the effects of applied torques on balance and gait.

    View details for DOI 10.1371/journal.pcbi.1010712

    View details for PubMedID 37549183

  • Anatomically Detailed Simulation of Human Torso ACM TRANSACTIONS ON GRAPHICS Lee, S., Jiang, Y., Liu, C. 2023; 42 (4)

    View details for DOI 10.1145/3592425

    View details for Web of Science ID 001044671300006

  • Hierarchical Planning and Control for Box Loco-Manipulation PROCEEDINGS OF THE ACM ON COMPUTER GRAPHICS AND INTERACTIVE TECHNIQUES Xie, Z., Tseng, J., Starke, S., De Panne, M., Liu, C. 2023; 6 (3)

    View details for DOI 10.1145/3606931

    View details for Web of Science ID 001059100600013

  • Trajectory and Sway Prediction Towards Fall Prevention. IEEE International Conference on Robotics and Automation : ICRA : [proceedings]. IEEE International Conference on Robotics and Automation Wang, W., Raitor, M., Collins, S., Liu, C. K., Kennedy, M. 2023; 2023: 10483-10489

    Abstract

    Falls are the leading cause of fatal and non-fatal injuries, particularly for older persons. Imbalance can result from the body's internal causes (illness), or external causes (active or passive perturbation). Active perturbation results from applying an external force to a person, while passive perturbation results from human motion interacting with a static obstacle. This work proposes a metric that allows for the monitoring of the persons torso and its correlation to active and passive perturbations. We show that large changes in the torso sway can be strongly correlated to active perturbations. We also show that we can reasonably predict the future path and expected change in torso sway by conditioning the expected path and torso sway on the past trajectory, torso motion, and the surrounding scene. This could have direct future applications to fall prevention. Results demonstrate that the torso sway is strongly correlated with perturbations. And our model is able to make use of the visual cues presented in the panorama and condition the prediction accordingly.

    View details for DOI 10.1109/icra48891.2023.10161361

    View details for PubMedID 38009123

    View details for PubMedCentralID PMC10671274

  • Ego-Body Pose Estimation via Ego-Head Pose Estimation Li, J., Liu, C., Wu, J., IEEE IEEE COMPUTER SOC. 2023: 17142-17151
  • DROP: Dynamics Responses from Human Motion Prior and Projective Dynamics ACM SIGGRAPH Jiang, Y., Won, J., Ye, Y., Liu, C. 2023
  • Sequential Dexterity: Chaining Dexterous Policies for Long-Horizon Manipulation Conference on Robot Learning (CoRL) Chen, Y., Wang, C., Li, F., Liu, C. 2023
  • On Designing a Learning Robot: Improving Morphology for Enhanced Task Performance and Learning Sorokin, M., Fu, C., Tan, J., Liu, K. C., Bai, Y., Lu, W., Ha, S., Khansari, M., IEEE IEEE. 2023: 487-494
  • CIRCLE: Capture In Rich Contextual Environments Araujo, J., Li, J., Vetrivel, K., Agarwal, R., Wu, J., Gopinath, D., Clegg, A., Liu, C., IEEE IEEE COMPUTER SOC. 2023: 21211-21221
  • <i>NeMo</i>: 3D <i>Ne</i>ural <i>Mo</i>tion Fields from Multiple Video Instances of the Same Action Wang, K., Weng, Z., Xenochristou, M., Araujo, J., Gu, J., Liu, C., Yeung, S., IEEE IEEE COMPUTER SOC. 2023: 22129-22138
  • EDGE: Editable Dance Generation From Music Tseng, J., Castellon, R., Liu, C., IEEE IEEE COMPUTER SOC. 2023: 448-458
  • Reinforcement Learning Enables Real-Time Planning and Control of Agile Maneuvers for Soft Robot Arms Conference on Robot Learning (CoRL) Jitosho, R., Lum, T., Okamura, A., Liu, C. 2023
  • Synthesizing Dexterous Nonprehensile Pregrasp for Ungraspable Objects Chen, S., Wu, A., Liu, C., Spencer, S. N. ASSOC COMPUTING MACHINERY. 2023
  • Characterizing Multidimensional Capacitive Servoing for Physical Human-Robot Interaction IEEE TRANSACTIONS ON ROBOTICS Erickson, Z., Clever, H. M., Gangaram, V., Xing, E., Turk, G., Liu, C., Kemp, C. C. 2022
  • A Survey on Reinforcement Learning Methods in Character Animation Kwiatkowski, A., Alvarado, E., Kalogeiton, V., Liu, C., Pettre, J., van de Panne, M., Cani, M. WILEY. 2022: 613-639

    View details for DOI 10.1111/cgf.14504

    View details for Web of Science ID 000802723900045

  • Learning to Navigate Sidewalks in Outdoor Environments IEEE ROBOTICS AND AUTOMATION LETTERS Sorokin, M., Tan, J., Liu, C., Ha, S. 2022; 7 (2): 3906-3913
  • DCL: Differential Contrastive Learning for Geometry-Aware Depth Synthesis IEEE ROBOTICS AND AUTOMATION LETTERS Shen, Y., Yang, Y., Zheng, Y., Liu, C., Guibas, L. J. 2022; 7 (2): 4845-4852
  • GIMO: Gaze-Informed Human Motion Prediction in Context Zheng, Y., Yang, Y., Mo, K., Li, J., Yu, T., Liu, Y., Liu, C., Guibas, L. J., Avidan, S., Brostow, G., Cisse, M., Farinella, G. M., Hassner, T. SPRINGER INTERNATIONAL PUBLISHING AG. 2022: 676-694
  • Learning Diverse and Physically Feasible Dexterous Grasps with Generative Model and Bilevel Optimization Conference on Robot Learning (CoRL) Wu, A., Guo, M., Liu, C. 2022
  • Transformer Inertial Poser: Real-time Human Motion Reconstruction from Sparse IMUs with Simultaneous Terrain Generation Proceedings of SIGGRAPH Asia Jiang, Y., Ye, Y., Gopinath, D., Won, J., Winkler, A., Liu, C. 2022
  • BEHAVIOR-1K: A Benchmark for Embodied AI with 1,000 Everyday Activities and Realistic Simulation Conference on Robot Learning (CoRL) Li, C. 2022
  • ADeLA: Automatic Dense Labeling with Attention for Viewpoint Adaptation in Semantic Segmentation Conference on Computer Vision and Pattern Recognition (CVPR) Yang, Y., Ren, H., Wang, H., Shen, B., Fan, Q., Zheng, Y., Liu, C., Guibas, L. 2022
  • Data-Augmented Contact Model for Rigid Body Simulation Learning for Dynamics & Control Conference (L4DC) Jian, Y., Sun, J., Liu, C. 2022
  • Real-time Model Predictive Control and System Identification Using Differentiable Physics Simulation IEEE Robotics and Automation Letters, Chen, S., Werling, K., Wu, A., Liu, C. 2022
  • Scene Synthesis from Human Motion Proceedings of ACM SIGGRAPH Asia Ye, S., Wang, Y., Li, J., Park, D., Liu, C., Xu, H., Wu, J. 2022
  • Task-Specific Design Optimization and Fabrication for Inflated-Beam Soft Robots with Growable Discrete Joints IEEE International Conference on Robotics and Automation (ICRA) Exachos, I., Wang, K., Do, B., Stroppa, F., Coad, M., Okamura, A., Liu, C. 2022
  • Learning Human Search Behavior from Egocentric Visual Inputs COMPUTER GRAPHICS FORUM Sorokin, M., Yu, W., Ha, S., Liu, C. 2021; 40 (2): 389-398

    View details for DOI 10.1111/cgf.142641

    View details for Web of Science ID 000657959600032

  • The Role of Physics-Based Simulators in Robotics ANNUAL REVIEW OF CONTROL, ROBOTICS, AND AUTONOMOUS SYSTEMS, VOL 4, 2021 Liu, C., Negrut, D., Leonard, N. E. 2021; 4: 35-58
  • Protective Policy Transfer Yu, W., Turk, G., Liu, C. K. 2021
  • SimGAN: Hybrid Simulator Identification for Domain Adaptation via Adversarial Reinforcement Learning Jiang, Y., Zhang, T., Ho, D., Bai, Y., Liu, C. K., Levine, S., Tan, J. 2021
  • Policy Transfer via Kinematic Domain Randomization and Adaptation Exarchos, I., Jiang, Y., Yu, W., Liu, C. K. 2021
  • Fast and Feature-Complete Differentiable Physics for Articulated Rigid Bodies with Contact Werling, K., Omens, D., Lee, J., Exarchos, I., Liu, C. K. 2021
  • Error-Aware Policy Learning: Zero-Shot Generalization in Partially Observable Dynamic Environments Kumar, V. C., Ha, S., Liu, C. K. 2021
  • Learning Task-Agnostic Action Spaces for Movement Optimization IEEE Transactions on Computer Graphics and Visualization Babadi, A., van de Panne, M., Liu, C. K., Hämäläinen, P. 2021
  • COCOI: Contact-aware Online Context Inference for Generalizable Non-planar Pushing Xu, Z., Yu, W., Herzog, A., Lu, W., Fu, C., Tomizuka, M., Bai, Y., Liu, C. K., Ho, D. 2021
  • iGibson 2.0: Object-Centric Simulation for Robot Learning of Everyday Household Tasks Li, C., Xia, F., Martin-Martin, R., Lingelbach, M., Srivastava, S., Shen, B., Vainio, K., Gokmen, C., Dharan, G., Jain, T., Kurenkov, A., Liu, C. K., Gweon, H., Wu, J., Fei-Fei, L., Savarese, S. 2021
  • Co-GAIL Learning Diverse Strategies for Human-Robot Collaboration Wang, C., Pérez-D'Arpino, C., Xu, D., Fei-Fei, L., Liu, C. K., Savarese, S. 2021
  • BEHAVIOR: Benchmark for Everyday Household Activities in Virtual, Interactive, and Ecological Environments Srivastava, S., Li, C., Lingelbach, M., Martin-Martin, R., Xia, F., Vainio, K., Lian, Z., Gokmen, C., Buch, S., Liu, C. K., Savarese, S., Gweon, H., Wu, J., Fei-Fei, L. 2021
  • DASH: Modularized Human Manipulation Simulation with Vision and Language for Embodied AI Jiang, Y., Guo, M., Li, J., Exarchos, I., Wu, J., Liu, C. K. 2021
  • Learning to Manipulate Amorphous Materials ACM TRANSACTIONS ON GRAPHICS Zhang, Y., Yu, W., Liu, C., Kemp, C., Turk, G. 2020; 39 (6)
  • Learning to Collaborate From Simulation for Robot-Assisted Dressing IEEE ROBOTICS AND AUTOMATION LETTERS Clegg, A., Erickson, Z., Grady, P., Turk, G., Kemp, C. C., Liu, C. 2020; 5 (2): 2746–53
  • Visualizing Movement Control Optimization Landscapes. IEEE transactions on visualization and computer graphics Hamalainen, P. n., Toikka, J. n., Babadi, A. n., Liu, K. n. 2020; PP

    Abstract

    A large body of animation research focuses on optimization of movement control, either as action sequences or policy parameters. However, as closed-form expressions of the objective functions are often not available, our understanding of the optimization problems is limited. Building on recent work on analyzing neural network training, we contribute novel visualizations of high-dimensional control optimization landscapes; this yields insights into why control optimization is hard and why common practices like early termination and spline-based action parameterizations make optimization easier. For example, our experiments show how trajectory optimization can become increasingly ill-conditioned with longer trajectories, but parameterizing control as partial target states-e.g., target angles converted to torques using a PD-controller-can act as an efficient preconditioner. Both our visualizations and quantitative empirical data also indicate that neural network policy optimization scales better than trajectory optimization for long planning horizons. Our work advances the understanding of movement optimization and our visualizations should also provide value in educational use.

    View details for DOI 10.1109/TVCG.2020.3018187

    View details for PubMedID 32816675

  • Estimating Mass Distribution of Articulated Objects using Non-prehensile Manipulation Kumar, K. N., Essa, I., Ha, S., Liu, C. K. 2020
  • Learning a Control Policy for Fall Prevention on an Assistive Walking Device Kumar, V., Ha, S., Sawicki, G., Liu, C. K. 2020
  • Learning a Control Policy for Fall Prevention on an Assistive Walking Device Kumar, V. C., Ha, S., Sawicki, G., Liu, C. K. 2020
  • Assistive Gym: A Physics Simulation Framework for Assistive Robotics Erickson, Z., Gangaram, V., Kapusta, A., Liu, C. K., Kemp, C. C. 2020
  • Bodies at Rest: 3D Human Pose and Shape Estimation from a Pressure Image using Synthetic Data Clever, H. M., Erickson, Z., Kapusta, A., Turk, G., Liu, C., Kemp, C. C., IEEE IEEE. 2020: 6214–23
  • Personalized collaborative plans for robot-assisted dressing via optimization and simulation AUTONOMOUS ROBOTS Kapusta, A., Erickson, Z., Clever, H. M., Yu, W., Liu, C., Turk, G., Kemp, C. C. 2019; 43 (8): 2183–2207
  • Synthesis of Biologically Realistic Human Motion Using Joint Torque Actuation ACM TRANSACTIONS ON GRAPHICS Jiang, Y., Van Wouwe, T., De Groote, F., Liu, C. 2019; 38 (4)
  • Sim-to-Real Transfer for Biped Locomotion IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) Yu, W., Kumar, V. C., Turk, G., Liu, C. 2019
  • Policy Transfer with Strategy Optimization Yu, W., Liu, C., Turk, G. 2019
  • Multidimensional Capacitive Sensing for Robot-Assisted Dressing and Bathing Erickson, Z., Clever, H. M., Gangaram, V., Turk, G., Liu, C., Kemp, C. C. 2019