Qianying Wu is a PhD candidate in the Mechanical Engineering Department at Stanford.

Growing up in a hot and humid climate in south China, Qianying developed her particular interest in thermal management. In the Nanoheat lab and advised by Prof. Ken Goodson, she is currently working on the design and fabrication of microporous wicking structures for capillary-driven two-phase heat and mass transfer, the simulation and integration of such engineered structures in novel high heat flux cooling devices, and exploring ways to utilize these technologies for positive energy and sustainability impact.

Qianying received her B.S in Engineering with top honors from Tsinghua University, where she was awarded the Xia An Shi Prize and National Scholarship, and her B. Econ from the School of Economics and Management at Tsinghua, where she was supported by a Fu Lai Chun Scholarship.

Honors & Awards

  • TomKat Center Graduate Fellow for Translational Research, TomKat Center for Sustainable Energy (2021)
  • Graduated with Honors, Tsinghua University (2018)

Education & Certifications

  • B.Eng, Tsinghua University, Building Science (2018)
  • B.Econ, Tsinghua University, Economics (2018)

Lab Affiliations

Work Experience

  • Summer Intern, Nokia Bell Labs (6/7/2021 - 8/13/2021)


    Murray Hill, NJ

All Publications

  • Techno-economic feasibility analysis of an extreme heat flux micro-cooler. iScience Dede, E. M., Zhang, C., Wu, Q., Seyedhassantehrani, N., Shattique, M., Roy, S., Palko, J. W., Narumanchi, S., Kekelia, B., Hazra, S., Goodson, K. E., Giglio, R., Asheghi, M. 2023; 26 (1): 105812


    An estimated 70% of the electricity in the United States currently passes through power conversion electronics, and this percentage is projected to increase eventually to up to 100%. At a global scale, wide adoption of highly efficient power electronics technologies is thus anticipated to have a major impact on worldwide energy consumption. As described in this perspective, for power conversion, outstanding thermal management for semiconductor devices is one key to unlocking this potentially massive energy savings. Integrated microscale cooling has been positively identified for such thermal management of future high-heat-flux, i.e., 1kW/cm2, wide-bandgap (WBG) semiconductor devices. In this work, we connect this advanced cooling approach to the energy impact of using WBG devices and further present a techno-economic analysis to clarify the projected status of performance, manufacturing approaches, fabrication costs, and remaining barriers to the adoption of such cooling technology.

    View details for DOI 10.1016/j.isci.2022.105812

    View details for PubMedID 36624838

  • A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies. Scientific reports Hazra, S., Zhang, C., Wu, Q., Asheghi, M., Goodson, K., Dede, E. M., Palko, J., Narumanchi, S. 2022; 12 (1): 12180


    This letter solves a major hurdle that mars photolithography-based fabrication of micro-mesoscale structures in silicon. Conventional photolithography is usually performed on smooth, flat wafer surfaces to lay a 2D design and subsequently etch it to create single-level features. It is, however, unable to process non-flat surfaces or already etched wafers and create more than one level in the structure. In this study, we have described a novel cleanroom-based process flow that allows for easy creation of such multi-level, hierarchical 3D structures in a substrate. This is achieved by introducing an ultra-thin sacrificial silicon dioxide hardmask layer on the substrate which is first 3D patterned via multiple rounds of lithography. This 3D pattern is then scaled vertically by a factor of 200-300 and transferred to the substrate underneath via a single shot deep etching step. The proposed method is also easily characterizable-using features of different topographies and dimensions, the etch rates and selectivities were quantified; this characterization information was later used while fabricating specific target structures. Furthermore, this study comprehensively compares the novel pattern transfer technique to already existing methods of creating multi-level structures, like grayscale lithography and chip stacking. The proposed process was found to be cheaper, faster, and easier to standardize compared to other methods-this made the overall process more reliable and repeatable. We hope it will encourage more research into hybrid structures that hold the key to dramatic performance improvements in several micro-mesoscale devices.

    View details for DOI 10.1038/s41598-022-16281-5

    View details for PubMedID 35842450

  • Two-phase thermofluidic modeling and validation of a multi-zone microchannel evaporator 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm) Wu, Q., Salamon, T. 2022
  • Partitioning of airborne PAEs on indoor impermeable surfaces: A microscopic view of the sorption process. Journal of hazardous materials Chen, Z., Wu, Q., Xu, Y., Mo, J. 2021; 424 (Pt A): 127326


    Organic films were widely found on indoor impermeable surfaces exposed to gaseous organic compounds, but few studies have addressed the film growth details on different indoor substrates. In this study, we observed the topography evolution of phthalic acid ester (PAE) organic films on three impermeable substrates: polished glass (G-P), mirror-polished stainless steel (SS-M) and drawn stainless steel (SS-D). PAE organic films were preferentially formed upon the flat surface with sparse inherent nano-peaks of substrate G-P and in valleys of substrate SS-M and SS-D. Surface uniformity of substrates and viscosity of PAE molecules were inferred as critical parameters determining the surface average adhesion forces. We obtained the partition coefficients of DEP, DnBP, BBP and DEHP on substrate G-P, SS-M and SS-D by fitting the initial monolayer adsorption process. Organic films continuously grew instead of reaching adsorption equilibrium after long-term PAE exposure, indicating that multilayer adsorption may occur. The organic film growth rates in saturated gas-phase PAE concentrations were quantified as about one-tenth of the results in previous studies where substrates were simultaneously exposed to multiple pollutants. To sum up, the results outline PAE adsorption details on impermeable materials and provide a reference for better estimation on PAE exposure assessment.

    View details for DOI 10.1016/j.jhazmat.2021.127326

    View details for PubMedID 34597933

  • CONTACT ANGLE TUNING OF COPPER MICROPOROUS STRUCTURES Soroush, F., Liu, T., Wu, Q., Asheghi, M., Goodson, K. E., Marco, L., Christian, E., Martin, R., Amer Soc Mech Engineers AMER SOC MECHANICAL ENGINEERS. 2021
  • A HYBRID MICROPOROUS COPPER STRUCTURE FOR HIGH PEROFMRANCE CAPILLARY-DRIVEN Soroush, F., Liu, T., Wu, Q., Zhang, C., Asheghi, M., Goodson, K. E., Marco, L., Christian, E., Martin, R., Amer Soc Mech Engineers AMER SOC MECHANICAL ENGINEERS. 2021
  • Design and Fabrication of Graded Copper Inverse Opals (g-CIOs) for Capillary-Fed Boiling in High Heat Flux Cooling Applications ASME 2020 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems Wu, Q., Zhang, C., Asheghi, M., Goodson, K. 2020

    View details for DOI 10.1115/ipack2020-2603