Wendy Mao
Professor of Earth and Planetary Sciences and of Photon Science
Earth & Planetary Sciences
Academic Appointments
-
Professor, Earth & Planetary Sciences
-
Professor, Photon Science Directorate
-
Principal Investigator, Stanford Institute for Materials and Energy Sciences
-
Member, Stanford PULSE Institute
Administrative Appointments
-
Chair, Earth and Planetary Sciences, Stanford University (2023 - Present)
-
Professor, Stanford University (2019 - Present)
-
Associate Professor, Stanford University (2014 - 2019)
-
Assistant Professor of Geophysics (by courtesy), Stanford University (2009 - Present)
-
Assistant Professor, Stanford University (2007 - 2014)
-
J. R. Oppenheimer Post-doctoral Fellow, Los Alamos National Laboratory (2005 - 2007)
Honors & Awards
-
Fellow, American Geophysical Union (2021)
-
Fellow, Geochemical Society (2021)
-
Award Recipient, Mineralogical Society of America (2013)
-
NSF CAREER Award, National Science Foundation (2011)
-
Fellow, Frederick E. Terman Fellowship (2009 - Present)
-
COMPRES Distinguished Lecturer, Stanford University (2008-2009)
-
Mineral and Rocks Physics Group Student Research Award, University of Chicago (2006)
-
Rosalind Franklin Young Investigator Award, University of Chicago (2006)
-
Fellow, J. R. Oppenheimer Fellowship (2005 - 2007)
-
Phi Beta Kappa, Massachusetts Institute of Technology (1998)
Boards, Advisory Committees, Professional Organizations
-
Advisory Group on Women at SLAC, SLAC National Accelerator Laboratory (2015 - Present)
-
CSEDI Steering Committee, NSF (2015 - Present)
-
Chair, GES Graduate Admissions Committee, Stanford University (2015 - Present)
-
DIF Advisory Committee, Stanford University (2015 - Present)
-
GES Communications Committee, Stanford University (2014 - Present)
-
Co-chair of Extreme Physics and Chemistry Directorate, Deep Carbon Observatory (2013 - Present)
-
GES Graduate Admissions Committee, Stanford University (2012 - Present)
-
Photon Science Integration Committee, SLAC National Accelerator Laboratory (2012 - 2013)
-
Scientific Steering Committee for the Extreme Physics and Chemistry Directorate, Deep Carbon Observatory (2011 - Present)
-
LCLS Users' Executive Committee, SLAC National Accelerator Laboratory (2011 - 2014)
-
Associate Editor, American Mineralogist (2010 - Present)
-
GES representative on SES Educational Outreach Committee, Stanford University (2010 - Present)
-
Pre-Majors Advisor, Stanford University (2010 - Present)
-
SNAP Instrument Design Team - Spallation Neutron Source, ORNL, Oak Ridge National Laboratory (2010 - Present)
-
Chair, Award Committee, Rosalind Frankin Young Investigator Asard (2010 - 2010)
-
COMPRES Facilities Committee, Consortium for Materials Properties Research in Earth Sciences (2009 - Present)
-
Member of APS Users Organization Steering Committee, Advanced Photon Source, Argonne National Laboratory (2009 - Present)
-
GES Dept Seminar Coordinator (w/ Maher), Stanford University (2009 - 2011)
-
Search Committee for Geochronology, Petrology, Geodynamics position, Stanford University (2008 - 2009)
-
GES Long Range Planning Committee, Stanford University (2007 - 2008)
-
West Coast High Pressure Facilities Review Committee, Advanced Light Source, Lawrence Berkeley National Laboratory (2006 - Present)
Professional Education
-
Ph.D., University of Chicago, Geophysical Sciences (2005)
-
B.S., Massachusetts Institute of Technology, Materials Science and Engineering (1998)
Current Research and Scholarly Interests
Research
Pressure induces dramatic changes in materials. I study the behavior of materials under compression which often leads to the discovery of novel phases and new phenomena. This research has a wide variety of applications including improving our understanding the interiors of Earth and other planetary bodies, providing insight into the condensation and evolution of volatiles in planetary systems, and providing guidance for developing new materials for energy related applications like hydrogen fuel storage and advanced batteries.
Teaching
I teach classes on understanding the Earth's interior, mineralogy, and a freshman seminar on diamonds.
2024-25 Courses
- Chemistry of the Earth and Planets
EARTHSYS 2, EPS 2 (Aut) - Survey of research in the Earth & Planetary Sciences
EPS 304 (Win) -
Independent Studies (14)
- Advanced Projects
EPS 399 (Aut, Win, Spr, Sum) - Curricular Practical Training
PHYSICS 291 (Aut, Win, Spr, Sum) - Directed Reading with Earth & Planetary Sciences Faculty
EPS 292 (Aut, Win) - Field Research
EPS 299 (Aut, Win, Spr, Sum) - Graduate Research
EPS 400 (Aut, Win, Spr, Sum) - Graduate Teaching Experience in Geological Sciences
EPS 386 (Aut, Win, Spr, Sum) - Honors Program
EPS 199 (Aut, Win) - Practical Experience in the Geosciences
EPS 385 (Aut, Win, Spr, Sum) - Research
PHYSICS 490 (Aut, Win, Spr, Sum) - Research in the Field
EPS 190 (Aut, Win, Sum) - Senior Thesis
EPS 197 (Aut, Win) - Teaching in Geological Sciences
EPS 398 (Aut, Win, Spr, Sum) - Undergraduate Research in Earth & Planetary Sciences
EPS 192 (Aut, Win) - Undergraduate Research in Geophysics
GEOPHYS 196 (Aut, Win, Spr, Sum)
- Advanced Projects
-
Prior Year Courses
2023-24 Courses
- Chemistry of the Earth and Planets
EARTHSYS 2, EPS 2 (Aut) - Survey of research in the Earth & Planetary Sciences
EPS 304 (Aut)
2022-23 Courses
- Chemistry of the Earth and Planets
EARTHSYS 2, GEOLSCI 2 (Aut)
2021-22 Courses
- Chemistry of the Earth and Planets
EARTHSYS 2, GEOLSCI 2 (Spr) - Journey to the Center of the Earth
GEOLSCI 107, GEOLSCI 207, GEOPHYS 184, GEOPHYS 274 (Win)
- Chemistry of the Earth and Planets
Stanford Advisees
-
Doctoral Dissertation Reader (AC)
Christina Deschene -
Postdoctoral Faculty Sponsor
Anna Celeste, Di Peng, Mengnan Wang, Yanyao Zhang -
Doctoral Dissertation Advisor (AC)
Cindy Wang -
Doctoral (Program)
Minkyung Han
All Publications
-
Making the most of metastability.
Science (New York, N.Y.)
2022; 377 (6608): 814-815
Abstract
Researchers seek to preserve materials that are formed at high pressure.
View details for DOI 10.1126/science.add5433
View details for PubMedID 35981027
-
Preservation of high-pressure volatiles in nanostructured diamond capsules.
Nature
2022; 608 (7923): 513-517
Abstract
High pressure induces dramatic changes and novel phenomena in condensed volatiles1,2 that are usually not preserved after recovery from pressure vessels. Here we report a process that pressurizes volatiles into nanopores of type1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0gigapascals embedded in nanocrystalline diamond, energy-dispersive X‑ray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type2 glassy carbon can be used as the precursor container material. Further experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.
View details for DOI 10.1038/s41586-022-04955-z
View details for PubMedID 35978124
-
Ultrafast structural response of shock-compressed plagioclase
METEORITICS & PLANETARY SCIENCE
2022
View details for DOI 10.1111/maps.13785
View details for Web of Science ID 000755921800001
-
Engineering Bright and Mechanosensitive Alkaline-Earth Rare-Earth Upconverting Nanoparticles.
The journal of physical chemistry letters
2022: 1547-1553
Abstract
Upconverting nanoparticles (UCNPs) are an emerging platform for mechanical force sensing at the nanometer scale. An outstanding challenge in realizing nanometer-scale mechano-sensitive UCNPs is maintaining a high mechanical force responsivity in conjunction with bright optical emission. This Letter reports mechano-sensing UCNPs based on the lanthanide dopants Yb3+ and Er3+, which exhibit a strong ratiometric change in emission spectra and bright emission under applied pressure. We synthesize and analyze the pressure response of five different types of nanoparticles, including cubic NaYF4 host nanoparticles and alkaline-earth host materials CaLuF, SrLuF, SrYbF, and BaLuF, all with lengths of 15 nm or less. By combining optical spectroscopy in a diamond anvil cell with single-particle brightness, we determine the noise equivalent sensitivity (GPa/√Hz) of these particles. The SrYb0.72Er0.28F@SrLuF particles exhibit an optimum noise equivalent sensitivity of 0.26 ± 0.04 GPa/√Hz. These particles present the possibility of robust nanometer-scale mechano-sensing.
View details for DOI 10.1021/acs.jpclett.1c03841
View details for PubMedID 35133831
-
Femtosecond Visualization of hcp-Iron Strength and Plasticity under Shock Compression.
Physical review letters
2021; 127 (20): 205501
Abstract
Iron is a key constituent of planets and an important technological material. Here, we combine insitu ultrafast x-ray diffraction with laser-induced shock compression experiments on Fe up to 187(10)GPa and 4070(285)K at 10^{8}s^{-1} in strain rate to study the plasticity of hexagonal-close-packed (hcp)-Fe under extreme loading states. {101[over ]2} deformation twinning controls the polycrystalline Fe microstructures and occurs within 1ns, highlighting the fundamental role of twinning in hcp polycrystals deformation at high strain rates. The measured deviatoric stress initially increases to a significant elastic overshoot before the onset of flow, attributed to a slower defect nucleation and mobility. The initial yield strength of materials deformed at high strain rates is thus several times larger than their longer-term flow strength. These observations illustrate how time-resolved ultrafast studies can reveal distinctive plastic behavior in materials under extreme environments.
View details for DOI 10.1103/PhysRevLett.127.205501
View details for PubMedID 34860050
-
Pressure-induced suppression of Jahn-Teller distortions and enhanced electronic properties in high-entropy oxide (Mg0.2Ni0.2Co0.2Zn0.2Cu0.2)O
APPLIED PHYSICS LETTERS
2021; 119 (15)
View details for DOI 10.1063/5.0067432
View details for Web of Science ID 000754619000011
-
Sub-10-nm graphene nanoribbons with atomically smooth edges from squashed carbon nanotubes
NATURE ELECTRONICS
2021
View details for DOI 10.1038/s41928-021-00633-6
View details for Web of Science ID 000692947500001
-
Characteristics and implications of podiform-chromite hosted silicate inclusions in the Zedang ophiolite, Southern Tibet
LITHOS
2021; 396
View details for DOI 10.1016/j.lithos.2021.106218
View details for Web of Science ID 000670299900004
-
Ultrafast X-ray Diffraction Study of a Shock-Compressed Iron Meteorite above 100 GPa
MINERALS
2021; 11 (6)
View details for DOI 10.3390/min11060567
View details for Web of Science ID 000666047800001
-
Mineralogy of the deep lower mantle in the presence of H2O.
National science review
2021; 8 (4): nwaa098
Abstract
Understanding the mineralogy of the Earth's interior is a prerequisite for unravelling the evolution and dynamics of our planet. Here, we conducted high pressure-temperature experiments mimicking the conditions of the deep lower mantle (DLM, 1800-2890 km in depth) and observed surprising mineralogical transformations in the presence of water. Ferropericlase, (Mg, Fe)O, which is the most abundant oxide mineral in Earth, reacts with H2O to form a previously unknown (Mg, Fe)O2H x (x ≤ 1) phase. The (Mg, Fe)O2H x has a pyrite structure and it coexists with the dominant silicate phases, bridgmanite and post-perovskite. Depending on Mg content and geotherm temperatures, the transformation may occur at 1800 km for (Mg0.6Fe0.4)O or beyond 2300 km for (Mg0.7Fe0.3)O. The (Mg, Fe)O2H x is an oxygen excess phase that stores an excessive amount of oxygen beyond the charge balance of maximum cation valences (Mg2+, Fe3+ and H+). This important phase has a number of far-reaching implications including extreme redox inhomogeneity, deep-oxygen reservoirs in the DLM and an internal source for modulating oxygen in the atmosphere.
View details for DOI 10.1093/nsr/nwaa098
View details for PubMedID 34691606
View details for PubMedCentralID PMC8288427
-
Evidence for oxygenation of Fe-Mg oxides at mid-mantle conditions and the rise of deep oxygen.
National science review
2021; 8 (4): nwaa096
Abstract
As the reaction product of subducted water and the iron core, FeO2 with more oxygen than hematite (Fe2O3) has been recently recognized as an important component in the D" layer just above the Earth's core-mantle boundary. Here, we report a new oxygen-excess phase (Mg, Fe)2O3+ δ (0 < δ < 1, denoted as 'OE-phase'). It forms at pressures greater than 40 gigapascal when (Mg, Fe)-bearing hydrous materials are heated over 1500 kelvin. The OE-phase is fully recoverable to ambient conditions for ex situ investigation using transmission electron microscopy, which indicates that the OE-phase contains ferric iron (Fe3+) as in Fe2O3 but holds excess oxygen through interactions between oxygen atoms. The new OE-phase provides strong evidence that H2O has extraordinary oxidation power at high pressure. Unlike the formation of pyrite-type FeO2Hx which usually requires saturated water, the OE-phase can be formed with under-saturated water at mid-mantle conditions, and is expected to be more ubiquitous at depths greater than 1000 km in the Earth's mantle. The emergence of oxygen-excess reservoirs out of primordial or subducted (Mg, Fe)-bearing hydrous materials may revise our view on the deep-mantle redox chemistry.
View details for DOI 10.1093/nsr/nwaa096
View details for PubMedID 34691604
View details for PubMedCentralID PMC8288346
-
Probing the Electronic Band Gap of Solid Hydrogen by Inelastic X-Ray Scattering up to 90GPa.
Physical review letters
2021; 126 (3): 036402
Abstract
Metallization of hydrogen as a key problem in modern physics is the pressure-induced evolution of the hydrogen electronic band from a wide-gap insulator to a closed gap metal. However, due to its remarkably high energy, the electronic band gap of insulating hydrogen has never before been directly observed under pressure. Using high-brilliance, high-energy synchrotron radiation, we developed an inelastic x-ray probe to yield the hydrogen electronic band information insitu under high pressures in a diamond-anvil cell. The dynamic structure factor of hydrogen was measured over a large energy range of 45eV. The electronic band gap was found to decrease linearly from 10.9 to 6.57eV, with an 8.6 times densification (rho/rho_{0}8.6) from zero pressure up to 90GPa.
View details for DOI 10.1103/PhysRevLett.126.036402
View details for PubMedID 33543962
-
Pressure-induced excimer formation and fluorescence enhancement of an anthracene derivative
JOURNAL OF MATERIALS CHEMISTRY C
2021; 9 (3): 934–38
View details for DOI 10.1039/d0tc04677a
View details for Web of Science ID 000612717600017
-
Polyamorphism in a solute-lean Al-Ce metallic glass
JOURNAL OF APPLIED PHYSICS
2021; 129 (2)
View details for DOI 10.1063/5.0036328
View details for Web of Science ID 000609820900001
-
Preserving a robust CsPbI3 perovskite phase via pressure-directed octahedral tilt.
Nature communications
2021; 12 (1): 461
Abstract
Functional CsPbI3 perovskite phases are not stable at ambient conditions and spontaneously convert to a non-perovskite δ phase, limiting their applications as solar cell materials. We demonstrate the preservation of a black CsPbI3 perovskite structure to room temperature by subjecting the δ phase to pressures of 0.1 - 0.6 GPa followed by heating and rapid cooling. Synchrotron X-ray diffraction and Raman spectroscopy indicate that this perovskite phase is consistent with orthorhombic γ-CsPbI3. Once formed, γ-CsPbI3 could be then retained after releasing pressure to ambient conditions and shows substantial stability at 35% relative humidity. First-principles density functional theory calculations indicate that compression directs the out-of-phase and in-phase tilt between the [PbI6]4- octahedra which in turn tune the energy difference between δ- and γ-CsPbI3, leading to the preservation of γ-CsPbI3. Here, we present a high-pressure strategy for manipulating the (meta)stability of halide perovskites for the synthesis of desirable phases with enhanced materials functionality.
View details for DOI 10.1038/s41467-020-20745-5
View details for PubMedID 33469021
-
Revealing Local Disorder in a Silver-Bismuth Halide Perovskite upon Compression.
The journal of physical chemistry letters
2020: 532–36
Abstract
The halide double perovskite Cs2AgBiBr6 has emerged as a promising nontoxic alternative to the lead halide perovskites APbX3 (A = organic cation or Cs; X = I or Br). Here, we perform high-pressure synchrotron X-ray total scattering on Cs2AgBiBr6 and discover local disorder that is hidden from conventional Bragg analysis. While our powder diffraction data show that the average structure remains cubic up to 2.1 GPa, analysis of the X-ray pair distribution function reveals that the local structure is better described by a monoclinic space group, with significant distortion within the Ag-Br and Bi-Br octahedra and off-centering of the Cs atoms. By tracking the distribution of interatomic Cs-Br distances, we find that the local disorder is enhanced upon compression, and we corroborate these results with molecular dynamics simulations. The observed local disorder affords new understanding of this promising material and potentially offers a new parameter to tune in halide perovskite lattices.
View details for DOI 10.1021/acs.jpclett.0c03412
View details for PubMedID 33377386
-
Synthesis of Atomically Thin Hexagonal Diamond with Compression.
Nano letters
2020
Abstract
Atomically thin diamond, also called diamane, is a two-dimensional carbon allotrope and has attracted considerable scientific interest because of its potential physical properties. However, the successful synthesis of a pristine diamane has up until now not been achieved. We demonstrate the realization of a pristine diamane through diamondization of mechanically exfoliated few-layer graphene via compression. Resistance, optical absorption, and X-ray diffraction measurements reveal that hexagonal diamane (h-diamane) with a bandgap of 2.8 ± 0.3 eV forms by compressing trilayer and thicker graphene to above 20 GPa at room temperature and can be preserved upon decompression to 1.0 GPa. Theoretical calculations indicate that a (-2110)-oriented h-diamane is energetically stable and has a lower enthalpy than its few-layer graphene precursor above the transition pressure. Compared to gapless graphene, semiconducting h-diamane offers exciting possibilities for carbon-based electronic devices.
View details for DOI 10.1021/acs.nanolett.0c01872
View details for PubMedID 32578991
-
Origin of Plasticity in Nanostructured Silicon.
Physical review letters
2020; 124 (18): 185701
Abstract
The mechanism of plasticity in nanostructured Si has been intensively studied over the past decade but still remains elusive. Here, we used in situ high-pressure radial x-ray diffraction to simultaneously monitor the deformation and structural evolution of a large number of randomly oriented Si nanoparticles (SiNPs). In contrast to the high-pressure β-Sn phase dominated plasticity observed in large SiNPs (∼100 nm), small SiNPs (∼9 nm) display a high-pressure simple hexagonal phase dominated plasticity. Meanwhile, dislocation activity exists in all of the phases, but significantly weakens as the particle size decreases and only leads to subtle plasticity in the initial diamond cubic phase. Furthermore, texture simulations identify major active slip systems in all of the phases. These findings elucidate the origin of plasticity in nanostructured Si under stress and provide key guidance for the application of nanostructured Si.
View details for DOI 10.1103/PhysRevLett.124.185701
View details for PubMedID 32441959
-
Origin of Plasticity in Nanostructured Silicon
PHYSICAL REVIEW LETTERS
2020; 124 (18)
View details for DOI 10.1103/PhysRevLett.124.185701
View details for Web of Science ID 000530756500012
-
Key problems of the four-dimensional Earth system
MATTER AND RADIATION AT EXTREMES
2020; 5 (3)
View details for DOI 10.1063/1.5139023
View details for Web of Science ID 000531438700001
-
Crystallography of low Z material at ultrahigh pressure: Case study on solid hydrogen
MATTER AND RADIATION AT EXTREMES
2020; 5 (3)
View details for DOI 10.1063/5.0003288
View details for Web of Science ID 000531438500001
-
Facile diamond synthesis from lower diamondoids.
Science advances
2020; 6 (8): eaay9405
Abstract
Carbon-based nanomaterials have exceptional properties that make them attractive for a variety of technological applications. Here, we report on the use of diamondoids (diamond-like, saturated hydrocarbons) as promising precursors for laser-induced high-pressure, high-temperature diamond synthesis. The lowest pressure and temperature (P-T) conditions that yielded diamond were 12 GPa (at ~2000 K) and 900 K (at ~20 GPa), respectively. This represents a substantially reduced transformation barrier compared with diamond synthesis from conventional (hydro)carbon allotropes, owing to the similarities in the structure and full sp3 hybridization of diamondoids and bulk diamond. At 20 GPa, diamondoid-to-diamond conversion occurs rapidly within <19 μs. Molecular dynamics simulations indicate that once dehydrogenated, the remaining diamondoid carbon cages reconstruct themselves into diamond-like structures at high P-T. This study is the first successful mapping of the P-T conditions and onset timing of the diamondoid-to-diamond conversion and elucidates the physical and chemical factors that facilitate diamond synthesis.
View details for DOI 10.1126/sciadv.aay9405
View details for PubMedID 32128417
View details for PubMedCentralID PMC7034983
-
Diamondoids Under Pressure
CARBON IN EARTH'S INTERIOR
2020; 249: 341-349
View details for DOI 10.1002/9781119508229.ch27
View details for Web of Science ID 000637614700028
-
Nitrogen in black phosphorus structure.
Science advances
2020; 6 (23): eaba9206
Abstract
Group V elements in crystal structure isostructural to black phosphorus with unique puckered two-dimensional layers exhibit exciting physical and chemical phenomena. However, as the first element of group V, nitrogen has never been found in the black phosphorus structure. Here, we report the synthesis of the black phosphorus-structured nitrogen at 146 GPa and 2200 K. Metastable black phosphorus-structured nitrogen was retained after quenching it to room temperature under compression and characterized in situ during decompression to 48 GPa, using synchrotron x-ray diffraction and Raman spectroscopy. We show that the original molecular nitrogen is transformed into extended single-bonded structure through gauche and trans conformations. Raman spectroscopy shows that black phosphorus-structured nitrogen is strongly anisotropic and exhibits high Raman intensities in two Ag normal modes. Synthesis of black phosphorus-structured nitrogen provides a firm base for exploring new type of high-energy-density nitrogen and a new direction of two-dimensional nitrogen.
View details for DOI 10.1126/sciadv.aba9206
View details for PubMedID 32537513
View details for PubMedCentralID PMC7269656
-
In situ X-ray diffraction of silicate liquids and glasses under dynamic and static compression to megabar pressures.
Proceedings of the National Academy of Sciences of the United States of America
2020
Abstract
Properties of liquid silicates under high-pressure and high-temperature conditions are critical for modeling the dynamics and solidification mechanisms of the magma ocean in the early Earth, as well as for constraining entrainment of melts in the mantle and in the present-day core-mantle boundary. Here we present in situ structural measurements by X-ray diffraction of selected amorphous silicates compressed statically in diamond anvil cells (up to 157 GPa at room temperature) or dynamically by laser-generated shock compression (up to 130 GPa and 6,000 K along the MgSiO3 glass Hugoniot). The X-ray diffraction patterns of silicate glasses and liquids reveal similar characteristics over a wide pressure and temperature range. Beyond the increase in Si coordination observed at 20 GPa, we find no evidence for major structural changes occurring in the silicate melts studied up to pressures and temperatures exceeding Earth's core mantle boundary conditions. This result is supported by molecular dynamics calculations. Our findings reinforce the widely used assumption that the silicate glasses studies are appropriate structural analogs for understanding the atomic arrangement of silicate liquids at these high pressures.
View details for DOI 10.1073/pnas.1920470117
View details for PubMedID 32414927
-
Tuning Emission and Electron-Phonon Coupling in Lead-Free Halide Double Perovskite Cs2AgBiCl6 under Pressure
ACS ENERGY LETTERS
2019; 4 (12): 2975–82
View details for DOI 10.1021/acsenergylett.9b02155
View details for Web of Science ID 000503114500026
-
Ultrahigh-pressure isostructural electronic transitions in hydrogen.
Nature
2019; 573 (7775): 558–62
Abstract
High-pressure transitions are thought to modify hydrogen molecules to a molecular metallic solid and finally to an atomic metal1, which is predicted to have exotic physical properties and the topology of a two-component (electron and proton) superconducting superfluid condensate2,3. Therefore, understanding such transitions remains an important objective in condensed matter physics4,5. However, measurements of the crystal structure of solid hydrogen, which provides crucial information about the metallization of hydrogen under compression, are lacking for most high-pressure phases, owing to the considerable technical challenges involved in X-ray and neutron diffraction measurements under extreme conditions. Here we present a single-crystal X-ray diffraction study of solid hydrogen at pressures of up to 254 gigapascals that reveals the crystallographic nature of the transitions from phase I to phases III and IV. Under compression, hydrogen molecules remain in the hexagonal close-packed (hcp) crystal lattice structure, accompanied by a monotonic increase in anisotropy. In addition, the pressure-dependent decrease of the unit cell volume exhibits a slope change when entering phase IV, suggesting a second-order isostructural phase transition. Our results indicate that the precursor to the exotic two-component atomic hydrogen may consist of electronic transitions caused by a highly distorted hcp Brillouin zone and molecular-symmetry breaking.
View details for DOI 10.1038/s41586-019-1565-9
View details for PubMedID 31554980
-
Pressure-Induced Emission (PIE) and Phase Transition of a Two-dimensional Halide Double Perovskite (BA)4AgBiBr8 (BA = CH3(CH2)3NH3+).
Angewandte Chemie (International ed. in English)
2019
Abstract
Two-dimensional (2D) halide perovskites have attracted significant attention due in part to their compositional flexibility and electronic diversity. Understanding the structure property relationships in 2D double perovskites is essential for their development for optoelectronic applications. In this work, we observed the emergence of pressure-induced emission (PIE) at 2.5 GPa with a broad emission band and large Stokes shift from initially nonfluorescent (BA)4AgBiBr8 (BA = CH3(CH2)3NH3+). The emission intensity increased significantly upon further compression up to 8.2 GPa. Moreover, the bandgap narrowed from the starting 2.61 eV to 2.19 eV at 25.0 GPa accompanied by a color change from light yellow to dark yellow. Analysis of combined in situ high-pressure photolu-minescence, absorption, and angle-dispersive X-ray diffraction data indicates that the observed PIE can be attributed to the emission from self-trapped excitons. This coincides with [AgBr6]5- and [BiBr6]3- inter-octahedral tilting which cause a structural phase transition. High-pressure study on (BA)4AgBiBr8 sheds light upon the relationship between the structure and optical properties that may improve the material's potential applications in the fields of pressure sensing, information storage and trademark security.
View details for DOI 10.1002/anie.201906311
View details for PubMedID 31448859
-
Halide perovskites under pressure
AMER CHEMICAL SOC. 2019
View details for Web of Science ID 000525061501426
-
Electronic spin transition in FeO2: Evidence for Fe(II) with peroxide O-2(2-)
PHYSICAL REVIEW B
2019; 100 (1)
View details for DOI 10.1103/PhysRevB.100.014418
View details for Web of Science ID 000475497200003
-
Applications for Nanoscale X-ray Imaging at High Pressure
ENGINEERING
2019; 5 (3): 479–89
View details for DOI 10.1016/j.eng.2019.01.006
View details for Web of Science ID 000472062600023
-
Structure-Controlled Oxygen Concentration in Fe2O3 and FeO2
INORGANIC CHEMISTRY
2019; 58 (9): 5476–82
View details for DOI 10.1021/acs.inorgchem.8b02764
View details for Web of Science ID 000467351100020
-
Anomalous behavior of nonequilibrium excitations in UO2
PHYSICAL REVIEW B
2019; 99 (13)
View details for DOI 10.1103/PhysRevB.99.134307
View details for Web of Science ID 000465151400002
-
Tuning Optical and Electronic Properties in Low-Toxicity Organic-Inorganic Hybrid (CH3NH3)(3)Bi2I9 under High Pressure
JOURNAL OF PHYSICAL CHEMISTRY LETTERS
2019; 10 (8): 1676–83
View details for DOI 10.1021/acs.jpclett.9b00595
View details for Web of Science ID 000465507700005
-
Phase transformations of Al-bearing high-entropy alloys AlxCoCrFeNi (x=0, 0.1, 0.3, 0.75, 1.5) at high pressure
APPLIED PHYSICS LETTERS
2019; 114 (9)
View details for DOI 10.1063/1.5079868
View details for Web of Science ID 000460820600017
-
Altered chemistry of oxygen and iron under deep Earth conditions
NATURE COMMUNICATIONS
2019; 10
View details for DOI 10.1038/s41467-018-08071-3
View details for Web of Science ID 000455473700021
-
Diffusion-controlled alloying of single-phase multi-principal transition metal carbides with high toughness and low thermal diffusivity
APPLIED PHYSICS LETTERS
2019; 114 (1)
View details for DOI 10.1063/1.5054954
View details for Web of Science ID 000455893000014
-
High Compression-Induced Conductivity in a Layered Cu-Br Perovskite.
Angewandte Chemie (International ed. in English)
2019
Abstract
We show that the onset pressure for appreciable conductivity in layered copper-halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu-Cl perovskites require pressures >50 GPa to show a conductivity of 10-4 S·cm-1, whereas here a Cu-Br congener, (EA)2CuBr4 (EA = ethylammonium), exhibits conductivity as high as 2 × 10-3 S·cm-1 at only 2.6 GPa, and 0.17 S·cm-1 at 59 GPa. Substitution of higher-energy Br 4p for Cl 3p orbitals lowers the charge-transfer bandgap of the perovskite by 0.9 eV. This 1.7 eV bandgap decreases to 0.3 eV at 65 GPa. High-pressure X-ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression-induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression-induced conductivity of Cu-halide perovskites to more technologically accessible pressures.
View details for DOI 10.1002/anie.201912575
View details for PubMedID 31883194
-
Superconducting transition temperatures in the electronic and magnetic phase diagrams of Sr<sub>2</sub>VFeAsO<sub>3-<i>delta</i></sub>, a superconductor.
Journal of physics. Condensed matter : an Institute of Physics journal
2018
Abstract
We unveil magnetic phases and superconducting transition temperatures (<i>T</i><sub>c</sub>) in an iron-based superconductor with a thick-blocking layer of a perovskite-related transition metal oxide, Sr<sub>2</sub>VFeAsO<sub>3-delta</sub> (21113V). 21113V exhibits a superconducting phase in 0.031 ≦ <i>delta</i> ≦ 0.145 at temperatures (<i>T</i>) < 37.1 K. Antiferromagnetic (AFM) iron sublattice are observed in 0.267 ≦ <i>delta</i> ≦ 0.664. A mixed valent vanadium exhibits a dominant AFM phase in 0.031 ≦ <i>delta</i> ≦ 0.088, while a partial ferrimagnetic (Ferri.) phase of the vanadium appears in 0.124 ≦ <i>delta</i> ≦ 0.664. The partial Ferri. phase becomes the most dominant for <i>delta</i>~0.267, in which the Fe shows AFM phase at <i>T</i> < 20 K. A volume fraction of the superconducting phase is suppressed by increasing of spontaneous magnetic moments due to the partial Ferri. vanadium; i.e the magnetic phase of the vanadium dominates superconductivity in 21113V. The <i>T</i><sub>c</sub>-<i>delta</i> curve shows two maxima. The lower maximum of Tc are observed for <i>delta</i> = 0.073. It is noted that the highest Tc of 21113V appears for <i>delta</i> = 0.145, which exists in a phase boundary between AFM and the partial Ferri. phases of the vanadium. 21113V is a platform to verify new mechanism for enhancing <i>T</i><sub>c</sub> in iron-based superconductors.
View details for DOI 10.1088/1361-648X/aaf7e0
View details for PubMedID 30537680
-
The effect of nickel on the strength of iron nickel alloys: Implications for the Earth's inner core
PHYSICS OF THE EARTH AND PLANETARY INTERIORS
2018; 283: 43–47
View details for DOI 10.1016/j.pepi.2018.08.003
View details for Web of Science ID 000447109000005
-
Mechanosensitive upconverting nanoparticles for visualizing mechanical forces in vivo
AMER CHEMICAL SOC. 2018
View details for Web of Science ID 000447600003857
-
Revealing the formation mechanism of ultrahard nanotwinned diamond from onion carbon
CARBON
2018; 129: 159–67
View details for DOI 10.1016/j.carbon.2017.12.027
View details for Web of Science ID 000424885800018
-
Radiation-induced disorder in compressed lanthanide zirconates
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
2018; 20 (9): 6187–97
Abstract
The effects of swift heavy ion irradiation-induced disordering on the behavior of lanthanide zirconate compounds (Ln2Zr2O7 where Ln = Sm, Er, or Nd) at high pressures are investigated. After irradiation with 2.2 GeV 197Au ions, the initial ordered pyrochlore structure (Fd3[combining macron]m) transformed to a defect-fluorite structure (Fm3[combining macron]m) in Sm2Zr2O7 and Nd2Zr2O7. For irradiated Er2Zr2O7, which has a defect-fluorite structure, ion irradiation induces local disordering by introducing Frenkel defects despite retention of the initial structure. When subjected to high pressures (>29 GPa) in the absence of irradiation, all of these compounds transform to a cotunnite-like (Pnma) phase, followed by sluggish amorphization with further compression. However, if these compounds are irradiated prior to compression, the high pressure cotunnite-like phase is not formed. Rather, they transform directly from their post-irradiation defect-fluorite structure to an amorphous structure upon compression (>25 GPa). Defects and disordering induced by swift heavy ion irradiation alter the transformation pathways by raising the energetic barriers for the transformation to the high pressure cotunnite-like phase, rendering it inaccessible. As a result, the high pressure stability field of the amorphous phase is expanded to lower pressures when irradiation is coupled with compression. The responses of materials in the lanthanide zirconate system to irradiation and compression, both individually and in tandem, are strongly influenced by the specific lanthanide composition, which governs the defect energetics at extreme conditions.
View details for PubMedID 29431823
-
Sterically controlled mechanochemistry under hydrostatic pressure
NATURE
2018; 554 (7693): 505-+
Abstract
Mechanical stimuli can modify the energy landscape of chemical reactions and enable reaction pathways, offering a synthetic strategy that complements conventional chemistry. These mechanochemical mechanisms have been studied extensively in one-dimensional polymers under tensile stress using ring-opening and reorganization, polymer unzipping and disulfide reduction as model reactions. In these systems, the pulling force stretches chemical bonds, initiating the reaction. Additionally, it has been shown that forces orthogonal to the chemical bonds can alter the rate of bond dissociation. However, these bond activation mechanisms have not been possible under isotropic, compressive stress (that is, hydrostatic pressure). Here we show that mechanochemistry through isotropic compression is possible by molecularly engineering structures that can translate macroscopic isotropic stress into molecular-level anisotropic strain. We engineer molecules with mechanically heterogeneous components-a compressible ('soft') mechanophore and incompressible ('hard') ligands. In these 'molecular anvils', isotropic stress leads to relative motions of the rigid ligands, anisotropically deforming the compressible mechanophore and activating bonds. Conversely, rigid ligands in steric contact impede relative motion, blocking reactivity. We combine experiments and computations to demonstrate hydrostatic-pressure-driven redox reactions in metal-organic chalcogenides that incorporate molecular elements that have heterogeneous compressibility, in which bending of bond angles or shearing of adjacent chains activates the metal-chalcogen bonds, leading to the formation of the elemental metal. These results reveal an unexplored reaction mechanism and suggest possible strategies for high-specificity mechanosynthesis.
View details for PubMedID 29469090
-
A(2)TiO(5) (A = Dy, Gd, Er, Yb) at High Pressure
INORGANIC CHEMISTRY
2018; 57 (4): 2269–77
Abstract
The structural evolution of lanthanide A2TiO5 (A = Dy, Gd, Yb, Er) at high pressure is investigated using synchrotron X-ray diffraction. The effects of A-site cation size and of the initial structure are systematically examined by varying the composition of the isostructural lanthanide titanates and the structure of dysprosium titanate polymorphs (orthorhombic, hexagonal, and cubic), respectively. All samples undergo irreversible high-pressure phase transformations, but with different onset pressures depending on the initial structure. While each individual phase exhibits different phase transformation histories, all samples commonly experience a sluggish transformation to a defect cotunnite-like (Pnma) phase for a certain pressure range. Orthorhombic Dy2TiO5 and Gd2TiO5 form P21am at pressures below 9 GPa and Pnma above 13 GPa. Pyrochlore-type Dy2TiO5 and Er2TiO5 as well as defect-fluorite-type Yb2TiO5 form Pnma at ∼21 GPa, followed by Im3̅m. Hexagonal Dy2TiO5 forms Pnma directly, although a small amount of remnants of hexagonal Dy2TiO5 is observed even at the highest pressure (∼55 GPa) reached, indicating kinetic limitations in the hexagonal Dy2TiO5 phase transformations at high pressure. Decompression of these materials leads to different metastable phases. Most interestingly, a high-pressure cubic X-type phase (Im3̅m) is confirmed using high-resolution transmission electron microscopy on recovered pyrochlore-type Er2TiO5. The kinetic constraints on this metastable phase yield a mixture of both the X-type phase and amorphous domains upon pressure release. This is the first observation of an X-type phase for an A2BO5 composition at high pressure.
View details for PubMedID 29420026
-
Swift-heavy ion irradiation response and annealing behavior of A(2)TiO(5) (A = Nd, Gd, and Yb)
JOURNAL OF SOLID STATE CHEMISTRY
2018; 258: 108–16
View details for DOI 10.1016/j.jssc.2017.09.028
View details for Web of Science ID 000423650400015
-
Phase transformation pathways of ultrafast-laser-irradiated Ln(2)O(3) (Ln = Er-Lu)
PHYSICAL REVIEW B
2018; 97 (2)
View details for DOI 10.1103/PhysRevB.97.024104
View details for Web of Science ID 000419704200004
-
Bright, Mechanosensitive Upconversion with Cubic-Phase Heteroepitaxial Core-Shell Nanoparticles.
Nano letters
2018
Abstract
Lanthanide-doped nanoparticles are an emerging class of optical sensors, exhibiting sharp emission peaks, high signal-to-noise ratio, photostability, and a ratiometric color response to stress. The same centrosymmetric crystal field environment that allows for high mechanosensitivity in the cubic-phase (α), however, contributes to low upconversion quantum yield (UCQY). In this work, we engineer brighter mechanosensitive upconverters using a core-shell geometry. Sub-25 nm α-NaYF4:Yb,Er cores are shelled with an optically inert surface passivation layer of ∼4.5 nm thickness. Using different shell materials, including NaGdF4, NaYF4, and NaLuF4, we study how compressive to tensile strain influences the nanoparticles' imaging and sensing properties. All core-shell nanoparticles exhibit enhanced UCQY, up to 0.14% at 150 W/cm2, which rivals the efficiency of unshelled hexagonal-phase (β) nanoparticles. Additionally, strain at the core-shell interface can tune mechanosensitivity. In particular, the compressive Gd shell results in the largest color response from yellow-green to orange or, quantitatively, a change in the red to green ratio of 12.2 ± 1.2% per GPa. For all samples, the ratiometric readouts are consistent over three pressure cycles from ambient to 5 GPa. Therefore, heteroepitaxial shelling significantly improves signal brightness without compromising the core's mechano-sensing capabilities and further, promotes core-shell cubic-phase nanoparticles as upcoming in vivo and in situ optical sensors.
View details for PubMedID 29927609
-
Lanthanide stannate pyrochlores (Ln(2)Sn(2)O(7); Ln = Nd, Gd, Er) at high pressure
JOURNAL OF PHYSICS-CONDENSED MATTER
2017; 29 (50)
View details for DOI 10.1088/1361-648X/aa9960
View details for Web of Science ID 000425265700001
-
Lanthanide stannate pyrochlores (Ln2Sn2O7; Ln = Nd, Gd, Er) at high pressure.
Journal of physics. Condensed matter : an Institute of Physics journal
2017; 29 (50): 504005
Abstract
Lanthanide stannate pyrochlores (Ln2Sn2O7; Ln = Nd, Gd, and Er) were investigated in situ to 50 GPa in order to determine their structural response to compression and compare their response to that of lanthanide titanate, zirconate, and hafnate pyrochlores. The cation radius ratio of A3+/B4+ in pyrochlore oxides (A2B2O7) is thought to be the dominant feature that influences their response on compression. The ionic radius of Sn4+ is intermediate to that of Ti4+, Zr4+, and Hf4+, but the 〈Sn-O〉 bond in stannate pyrochlore is more covalent than the 〈B-O〉 bonds in titanates, zirconate, and hafnates. In stannates, based on in situ Raman spectroscopy, pyrochlore cation and anion sublattices begin to disorder with the onset of compression, first measured at 0.3 GPa. The extent of sublattice disorder versus pressure is greater in stannates with a smaller Ln3+ cation. Stannate pyrochlores (Fd-3m) begin a sluggish transformation to an orthorhombic, cotunnite-like structure at ~28 GPa; similar transitions have been observed in titanate, zirconate, and hafnate pyrochlores at varying pressures (18-40 GPa) with cation radius ratio. The extent of the phase transition versus pressure varies directly with the size of the Ln3+ cation. Post-decompression from ~50 GPa, Er2Sn2O7 and Gd2Sn2O7 adopt a pyrochlore structure, rather than the multi-scale defect-fluorite + weberite-type structure adopted by Nd2Sn2O7 that is characteristic of titanate, zirconate, and hafnate pyrochlores under similar conditions. Like pyrochlore titanates, zirconates, and hafnates, the bulk modulus, B 0, of stannates varies linearly and inversely with cation radius ratio from 1 1 1 GPa (Nd2Sn2O7) to 251 GPa (Er2Sn2O7). The trends of bulk moduli in stannates in this study are in excellent agreement with previous experimental studies on stannates and suggest that the size of the Ln3+ cation is the primary determining factor of B 0. Additionally, when normalized to r A/r B, the bulk moduli of stannates are comparable to those of zirconates and hafnates, which vary from titanates. Our results suggest that the cation radius ratio strongly influences the bulk moduli of stannates, as well as their overall compression response.
View details for DOI 10.1088/1361-648X/aa9960
View details for PubMedID 29176046
-
Hydrogen-bearing iron peroxide and the origin of ultralow-velocity zones
NATURE
2017; 551 (7681): 494-+
Abstract
Ultralow-velocity zones (ULVZs) at Earth's core-mantle boundary region have important implications for the chemical composition and thermal structure of our planet, but their origin has long been debated. Hydrogen-bearing iron peroxide (FeO2Hx) in the pyrite-type crystal structure was recently found to be stable under the conditions of the lowermost mantle. Using high-pressure experiments and theoretical calculations, we find that iron peroxide with a varying amount of hydrogen has a high density and high Poisson ratio as well as extremely low sound velocities consistent with ULVZs. Here we also report a reaction between iron and water at 86 gigapascals and 2,200 kelvin that produces FeO2Hx. This would provide a mechanism for generating the observed volume occupied by ULVZs through the reaction of about one-tenth the mass of Earth's ocean water in subducted hydrous minerals with the effectively unlimited reservoir of iron in Earth's core. Unlike other candidates for the composition of ULVZs, FeO2Hx synthesized from the superoxidation of iron by water would not require an extra transportation mechanism to migrate to the core-mantle boundary. These dense FeO2Hx-rich domains would be expected to form directly in the core-mantle boundary region and their properties would provide an explanation for the many enigmatic seismic features that are observed in ULVZs.
View details for PubMedID 29168804
-
Lanthanide stannate pyrochlores (Ln<sub>2</sub>Sn<sub>2</sub>O<sub>7</sub>; Ln = Nd, Gd, Er) at high pressure.
Journal of physics. Condensed matter : an Institute of Physics journal
2017
Abstract
Lanthanide stannate pyrochlores (Ln2Sn2O7; Ln=Nd, Gd, and Er) were investigated in situ to 50 GPa in order to determine their structural response to compression and compare it to that of lanthanide titanate, zirconate, and hafnate pyrochlores. The cation radius ratio of A3+/B4+ in pyrochlore oxides (A2B2O7) is thought to be the dominant property that influences their compression response. The ionic radius of Sn4+ is intermediate to that of Ti4+, Zr4+, and Hf4+, but the <Sn-O> bond in stannate pyrochlore is more covalent than the <B-O> bonds in titanates, zirconate, and hafnates. In stannates, the pyrochlore cation and anion sublattices begin to disorder at 0.3 GPa. The extent of sublattice disorder vs. pressure is greater in stannates with a smaller Ln3+ cation. Stannate pyrochlores (Fd-3m) begin a sluggish transformation to a cotunnite-like structure (Pnma) at ~28 GPa; similar transitions have been observed in titanate, zirconate, and hafnate pyrochlore at varying pressures with cation radius ratio. The extent of the phase transition vs. pressure varies directly with the size of the Ln3+ cation. Post-decompression from ~50 GPa, Er2Sn2O7 and Gd2Sn2O7 adopt a pyrochlore structure, rather than the multiscale defect-fluorite + weberite structure adopted by Nd2Sn2O7 that is characteristic of titanate, zirconate, and hafnate pyrochlore treated to similar conditions. Like pyrochlore titanates, zirconates, and hafnates, the bulk modulus, B0, of stannates varies linearly and inversely with cation radius ratio. The trends of bulk moduli in stannates in this study are in excellent agreement with previous experimental studies on stannates, and suggest that the size of the Ln3+ cation is a primary determining factor of B0. Additionally, when normalized to rA/rB, the bulk moduli of stannates are comparable to those of zirconates and hafnates, which vary from titanates. Our results suggest that the cation radius ratio strongly influences the bulk moduli of stannates as well as their overall compression response.
View details for DOI 10.1088/1361-648X/aa9960
View details for PubMedID 29120343
-
When water meets iron at Earth's core-mantle boundary
NATIONAL SCIENCE REVIEW
2017; 4 (6): 870–78
View details for DOI 10.1093/nsr/nwx109
View details for Web of Science ID 000424321000024
-
Hydrogen-Bond Symmetrization Breakdown and Dehydrogenation Mechanism of FeO2H at High Pressure.
Journal of the American Chemical Society
2017; 139 (35): 12129-12132
Abstract
The cycling of hydrogen plays an important role in the geochemical evolution of our planet. Under high-pressure conditions, asymmetric hydroxyl bonds tend to form a symmetric O-H-O configuration in which H is positioned at the center of two O atoms. The symmetrization of O-H bonds improves their thermal stability and as such, water-bearing minerals can be present deeper in the Earth's lower mantle. However, how exactly H is recycled from the deep mantle remains unclear. Here, we employ first-principles free-energy landscape sampling methods together with high pressure-high temperature experiments to reveal the dehydrogenation mechanism of a water-bearing mineral, FeO2H, at deep mantle conditions. Experimentally, we show that ∼50% H is released from symmetrically hydrogen-bonded ε-FeO2H upon transforming to a pyrite-type phase (Py-phase). By resolving the lowest-energy transition pathway from ε-FeO2H to the Py-phase, we demonstrate that half of the O-H bonds in the mineral rupture during the structural transition, leading toward the breakdown of symmetrized hydrogen bonds and eventual dehydrogenation. Our study sheds new light on the stability of symmetric hydrogen bonds during structural transitions and provides a dehydrogenation mechanism for hydrous minerals existing in the deep mantle.
View details for DOI 10.1021/jacs.7b06528
View details for PubMedID 28829596
-
Synthesis of quenchable amorphous diamond
NATURE COMMUNICATIONS
2017; 8: 322
Abstract
Diamond owes its unique mechanical, thermal, optical, electrical, chemical, and biocompatible materials properties to its complete sp 3-carbon network bonding. Crystallinity is another major controlling factor for materials properties. Although other Group-14 elements silicon and germanium have complementary crystalline and amorphous forms consisting of purely sp 3 bonds, purely sp 3-bonded tetrahedral amorphous carbon has not yet been obtained. In this letter, we combine high pressure and in situ laser heating techniques to convert glassy carbon into "quenchable amorphous diamond", and recover it to ambient conditions. Our X-ray diffraction, high-resolution transmission electron microscopy and electron energy-loss spectroscopy experiments on the recovered sample and computer simulations confirm its tetrahedral amorphous structure and complete sp 3 bonding. This transparent quenchable amorphous diamond has, to our knowledge, the highest density among amorphous carbon materials, and shows incompressibility comparable to crystalline diamond.Diamond's properties are dictated by its crystalline, fully tetrahedrally bonded structure. Here authors synthesize a bulk sp 3-bonded amorphous form of carbon under high pressure and temperature, show that it has bulk modulus comparable to crystalline diamond and that it can be recovered under ambient conditions.
View details for PubMedID 28831044
-
Pressure-induced structural modifications of rare-earth hafnate pyrochlore.
Journal of physics. Condensed matter : an Institute of Physics journal
2017; 29 (25): 255401-?
Abstract
Complex oxides with the pyrochlore (A2B2O7) and defect-fluorite ((A,B)4O7) structure-types undergo structural transformations under high-pressure. Rare-earth hafnates (A2Hf2O7) form the pyrochlore structure for A = La-Tb and the defect-fluorite structure for A = Dy-Lu. High-pressure transformations in A2Hf2O7 pyrochlore (A = Sm, Eu, Gd) and defect-fluorite (A = Dy, Y, Yb) were investigated up to ~50 GPa and characterized by in situ Raman spectroscopy and synchrotron x-ray diffraction (XRD). Raman spectra at ambient pressure revealed that all compositions, including the defect-fluorites, have some pyrochlore-type short-range order. In situ high-pressure synchrotron XRD showed that all of the rare earth hafnates investigated undergo a pressure-induced phase transition to a cotunnite-like (orthorhombic) structure that begins between 18 and 25 GPa. The phase transition to the cotunnite-like structure is not complete at 50 GPa, and upon release of pressure, the hafnates transform to defect-fluorite with an amorphous component. For all compositions, in situ Raman spectroscopy showed that disordering occurs gradually with increasing pressure. Pyrochlore-structured hafnates retain their short-range order to a higher pressure (30 GPa vs. <10 GPa) than defect-fluorite-structured hafnates. Rare earth hafnates quenched from 50 GPa show Raman spectra consistent with weberite-type structures, as also reported for irradiated rare-earth stannates. The second-order Birch-Murnaghan equation of state fit gives a bulk modulus of ~250 GPa for hafnates with the pyrochlore structure, and ~400 GPa for hafnates with the defect-fluorite structure. Dy2Hf2O7 is intermediate in its response, with some pyrochlore-type ordering, based on Raman spectroscopy and the equation of state, with a bulk modulus of ~300 GPa. As predicted based on the similar ionic radius of Zr(4+) and Hf(4+), rare-earth hafnates show similar behavior to that reported for rare earth zirconates at high pressure.
View details for DOI 10.1088/1361-648X/aa7148
View details for PubMedID 28541929
-
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
NATURE COMMUNICATIONS
2017; 8
Abstract
High-entropy alloys, near-equiatomic solid solutions of five or more elements, represent a new strategy for the design of materials with properties superior to those of conventional alloys. However, their phase space remains constrained, with transition metal high-entropy alloys exhibiting only face- or body-centered cubic structures. Here, we report the high-pressure synthesis of a hexagonal close-packed phase of the prototypical high-entropy alloy CrMnFeCoNi. This martensitic transformation begins at 14 GPa and is attributed to suppression of the local magnetic moments, destabilizing the initial fcc structure. Similar to fcc-to-hcp transformations in Al and the noble gases, the transformation is sluggish, occurring over a range of >40 GPa. However, the behaviour of CrMnFeCoNi is unique in that the hcp phase is retained following decompression to ambient pressure, yielding metastable fcc-hcp mixtures. This demonstrates a means of tuning the structures and properties of high-entropy alloys in a manner not achievable by conventional processing techniques.
View details for DOI 10.1038/ncomms15634
View details for Web of Science ID 000401966000001
View details for PubMedID 28541277
-
Strain engineered pyrochlore at high pressure.
Scientific reports
2017; 7 (1): 2236-?
Abstract
Strain engineering is a promising method for next-generation materials processing techniques. Here, we use mechanical milling and annealing followed by compression in diamond anvil cell to tailor the intrinsic and extrinsic strain in pyrochlore, Dy2Ti2O7 and Dy2Zr2O7. Raman spectroscopy, X-ray pair distribution function analysis, and X-ray diffraction were used to characterize atomic order over short-, medium-, and long-range spatial scales, respectively, under ambient conditions. Raman spectroscopy and X-ray diffraction were further employed to interrogate the material in situ at high pressure. High-pressure behavior is found to depend on the species and concentration of defects in the sample at ambient conditions. Overall, we show that defects can be engineered to lower the phase transformation onset pressure by ~50% in the ordered pyrochlore Dy2Ti2O7, and lower the phase transformation completion pressure by ~20% in the disordered pyrochlore Dy2Zr2O7. These improvements are achieved without significantly sacrificing mechanical integrity, as characterized by bulk modulus.
View details for DOI 10.1038/s41598-017-02637-9
View details for PubMedID 28533513
-
The structure and unconventional dihydrogen bonding of a pressure-stabilized hydrogen-rich (NH3BH3)(H-2)(x) (x=1.5) compound
JOURNAL OF MATERIALS CHEMISTRY A
2017; 5 (15): 7111-7117
View details for DOI 10.1039/c7ta01005b
View details for Web of Science ID 000398889600036
-
Pressure-Induced Metallization of the Halide Perovskite (CH3NH3)PbI3
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
2017; 139 (12): 4330-4333
View details for DOI 10.1021/jacs.7b01162
View details for Web of Science ID 000398247100024
-
Dehydrogenation of goethite in Earth's deep lower mantle.
Proceedings of the National Academy of Sciences of the United States of America
2017; 114 (7): 1498-1501
Abstract
The cycling of hydrogen influences the structure, composition, and stratification of Earth's interior. Our recent discovery of pyrite-structured iron peroxide (designated as the P phase) and the formation of the P phase from dehydrogenation of goethite FeO2H implies the separation of the oxygen and hydrogen cycles in the deep lower mantle beneath 1,800 km. Here we further characterize the residual hydrogen, x, in the P-phase FeO2Hx Using a combination of theoretical simulations and high-pressure-temperature experiments, we calibrated the x dependence of molar volume of the P phase. Within the current range of experimental conditions, we observed a compositional range of P phase of 0.39 < x < 0.81, corresponding to 19-61% dehydrogenation. Increasing temperature and heating time will help release hydrogen and lower x, suggesting that dehydrogenation could be approaching completion at the high-temperature conditions of the lower mantle over extended geological time. Our observations indicate a fundamental change in the mode of hydrogen release from dehydration in the upper mantle to dehydrogenation in the deep lower mantle, thus differentiating the deep hydrogen and hydrous cycles.
View details for DOI 10.1073/pnas.1620644114
View details for PubMedID 28143928
View details for PubMedCentralID PMC5320987
-
High-pressure behavior of A(2)B(2)O(7) pyrochlore (A=Eu, Dy; B=Ti, Zr)
JOURNAL OF APPLIED PHYSICS
2017; 121 (4)
View details for DOI 10.1063/1.4974871
View details for Web of Science ID 000393480100066
-
Dynamic Optical Tuning of Interlayer Interactions in the Transition Metal Dichalcogenides.
Nano letters
2017; 17 (12): 7761–66
Abstract
Modulation of weak interlayer interactions between quasi-two-dimensional atomic planes in the transition metal dichalcogenides (TMDCs) provides avenues for tuning their functional properties. Here we show that above-gap optical excitation in the TMDCs leads to an unexpected large-amplitude, ultrafast compressive force between the two-dimensional layers, as probed by in situ measurements of the atomic layer spacing at femtosecond time resolution. We show that this compressive response arises from a dynamic modulation of the interlayer van der Waals interaction and that this represents the dominant light-induced stress at low excitation densities. A simple analytic model predicts the magnitude and carrier density dependence of the measured strains. This work establishes a new method for dynamic, nonequilibrium tuning of correlation-driven dispersive interactions and of the optomechanical functionality of TMDC quasi-two-dimensional materials.
View details for PubMedID 29119791
-
High-pressure compressibility and vibrational properties of (Ca,Mn)CO3
AMERICAN MINERALOGIST
2016; 101 (12): 2723-2730
View details for DOI 10.2138/am-2016-5742
View details for Web of Science ID 000392291600013
-
Effects of Molecular Geometry on the Properties of Compressed Diamondoid Crystals
JOURNAL OF PHYSICAL CHEMISTRY LETTERS
2016; 7 (22): 4641-4647
Abstract
Diamondoids are an intriguing group of carbon-based nanomaterials, which combine desired properties of inorganic nanomaterials and small hydrocarbon molecules with atomic-level uniformity. In this Letter, we report the first comparative study on the effect of pressure on a series of diamondoid crystals with systematically varying molecular geometries and shapes, including zero-dimensional (0D) adamantane; one-dimensional (1D) diamantane, [121]tetramantane, [123]tetramantane, and [1212]pentamantane; two-dimensional (2D) [12312]hexamantane; and three-dimensional (3D) triamantane and [1(2,3)4]pentamantane. We find the bulk moduli of these diamondoid crystals are strongly dependent on the diamondoids' molecular geometry with 3D [1(2,3)4]pentamantane being the least compressible and 0D adamantane being the most compressible. These diamondoid crystals possess excellent structural rigidity and are able to sustain large volume deformation without structural failure even after repetitive pressure loading cycles. These properties are desirable for constructing cushioning devices. We also demonstrate that lower diamondoids outperform the conventional cushioning materials in both the working pressure range and energy absorption density.
View details for DOI 10.1021/acs.jpclett.6b02161
View details for PubMedID 27801594
-
Substantial tensile ductility in sputtered Zr-Ni-Al nano-sized metallic glass
ACTA MATERIALIA
2016; 118: 270-285
View details for DOI 10.1016/j.actamat.2016.07.050
View details for Web of Science ID 000383935800027
-
Pressure tuning the lattice and optical response of silver sulfide
APPLIED PHYSICS LETTERS
2016; 108 (26)
View details for DOI 10.1063/1.4954801
View details for Web of Science ID 000379178200013
-
High-pressure behavior of the polymorphs of FeOOH
AMERICAN MINERALOGIST
2016; 101 (5-6): 1483-1488
View details for DOI 10.2138/am-2016-5449
View details for Web of Science ID 000378185600047
-
Pressure-dependent isotopic composition of iron alloys
SCIENCE
2016; 352 (6285): 580-582
Abstract
Our current understanding of Earth's core formation is limited by the fact that this profound event is far removed from us physically and temporally. The composition of the iron metal in the core was a result of the conditions of its formation, which has important implications for our planet's geochemical evolution and physical history. We present experimental and theoretical evidence for the effect of pressure on iron isotopic composition, which we found to vary according to the alloy tested (FeO, FeH(x), or Fe3C versus pure Fe). These results suggest that hydrogen or carbon is not the major light-element component in the core. The pressure dependence of iron isotopic composition provides an independent constraint on Earth's core composition.
View details for DOI 10.1126/science.aad9945
View details for Web of Science ID 000374998600043
View details for PubMedID 27126042
-
High-Pressure Single-Crystal Structures of 3D Lead-Halide Hybrid Perovskites and Pressure Effects on their Electronic and Optical Properties.
ACS central science
2016; 2 (4): 201-209
Abstract
We report the first high-pressure single-crystal structures of hybrid perovskites. The crystalline semiconductors (MA)PbX3 (MA = CH3NH3 (+), X = Br(-) or I(-)) afford us the rare opportunity of understanding how compression modulates their structures and thereby their optoelectronic properties. Using atomic coordinates obtained from high-pressure single-crystal X-ray diffraction we track the perovskites' precise structural evolution upon compression. These structural changes correlate well with pressure-dependent single-crystal photoluminescence (PL) spectra and high-pressure bandgaps derived from density functional theory. We further observe dramatic piezochromism where the solids become lighter in color and then transition to opaque black with compression. Indeed, electronic conductivity measurements of (MA)PbI3 obtained within a diamond-anvil cell show that the material's resistivity decreases by 3 orders of magnitude between 0 and 51 GPa. The activation energy for conduction at 51 GPa is only 13.2(3) meV, suggesting that the perovskite is approaching a metallic state. Furthermore, the pressure response of mixed-halide perovskites shows new luminescent states that emerge at elevated pressures. We recently reported that the perovskites (MA)Pb(Br x I1-x )3 (0.2 < x < 1) reversibly form light-induced trap states, which pin their PL to a low energy. This may explain the low voltages obtained from solar cells employing these absorbers. Our high-pressure PL data indicate that compression can mitigate this PL redshift and may afford higher steady-state voltages from these absorbers. These studies show that pressure can significantly alter the transport and thermodynamic properties of these technologically important semiconductors.
View details for DOI 10.1021/acscentsci.6b00055
View details for PubMedID 27163050
View details for PubMedCentralID PMC4850512
-
In situ measurement of lithiation-induced stress in silicon nanoparticles using micro-Raman spectroscopy
NANO ENERGY
2016; 22: 105-110
View details for DOI 10.1016/j.nanoen.2016.02.005
View details for Web of Science ID 000374625300012
-
General 2.5 power law of metallic glasses
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2016; 113 (7): 1714-1718
Abstract
Metallic glass (MG) is an important new category of materials, but very few rigorous laws are currently known for defining its "disordered" structure. Recently we found that under compression, the volume (V) of an MG changes precisely to the 2.5 power of its principal diffraction peak position (1/q1). In the present study, we find that this 2.5 power law holds even through the first-order polyamorphic transition of a Ce68Al10Cu20Co2 MG. This transition is, in effect, the equivalent of a continuous "composition" change of 4f-localized "big Ce" to 4f-itinerant "small Ce," indicating the 2.5 power law is general for tuning with composition. The exactness and universality imply that the 2.5 power law may be a general rule defining the structure of MGs.
View details for DOI 10.1073/pnas.1525390113
View details for Web of Science ID 000370220000029
View details for PubMedID 26831105
View details for PubMedCentralID PMC4763748
-
High-pressure single-crystal structures of 3D lead-halide hybrid perovskites and pressure effects on their electronic and optical properties
ACS Cent. Sci
2016; 2: 201
Abstract
We report the first high-pressure single-crystal structures of hybrid perovskites. The crystalline semiconductors (MA)PbX3 (MA = CH3NH3 (+), X = Br(-) or I(-)) afford us the rare opportunity of understanding how compression modulates their structures and thereby their optoelectronic properties. Using atomic coordinates obtained from high-pressure single-crystal X-ray diffraction we track the perovskites' precise structural evolution upon compression. These structural changes correlate well with pressure-dependent single-crystal photoluminescence (PL) spectra and high-pressure bandgaps derived from density functional theory. We further observe dramatic piezochromism where the solids become lighter in color and then transition to opaque black with compression. Indeed, electronic conductivity measurements of (MA)PbI3 obtained within a diamond-anvil cell show that the material's resistivity decreases by 3 orders of magnitude between 0 and 51 GPa. The activation energy for conduction at 51 GPa is only 13.2(3) meV, suggesting that the perovskite is approaching a metallic state. Furthermore, the pressure response of mixed-halide perovskites shows new luminescent states that emerge at elevated pressures. We recently reported that the perovskites (MA)Pb(Br x I1-x )3 (0.2 < x < 1) reversibly form light-induced trap states, which pin their PL to a low energy. This may explain the low voltages obtained from solar cells employing these absorbers. Our high-pressure PL data indicate that compression can mitigate this PL redshift and may afford higher steady-state voltages from these absorbers. These studies show that pressure can significantly alter the transport and thermodynamic properties of these technologically important semiconductors.
View details for DOI 10.1021/acscentsci.6b00055
View details for PubMedCentralID PMC4850512
-
Potentially biogenic carbon preserved in a 4.1 billion-year-old zircon
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2015; 112 (47): 14518-14521
Abstract
Evidence of life on Earth is manifestly preserved in the rock record. However, the microfossil record only extends to ∼ 3.5 billion years (Ga), the chemofossil record arguably to ∼ 3.8 Ga, and the rock record to 4.0 Ga. Detrital zircons from Jack Hills, Western Australia range in age up to nearly 4.4 Ga. From a population of over 10,000 Jack Hills zircons, we identified one >3.8-Ga zircon that contains primary graphite inclusions. Here, we report carbon isotopic measurements on these inclusions in a concordant, 4.10 ± 0.01-Ga zircon. We interpret these inclusions as primary due to their enclosure in a crack-free host as shown by transmission X-ray microscopy and their crystal habit. Their δ(13)CPDB of -24 ± 5‰ is consistent with a biogenic origin and may be evidence that a terrestrial biosphere had emerged by 4.1 Ga, or ∼ 300 My earlier than has been previously proposed.
View details for DOI 10.1073/pnas.1517557112
View details for Web of Science ID 000365173100049
View details for PubMedID 26483481
View details for PubMedCentralID PMC4664351
-
Fractal atomic-level percolation in metallic glasses
SCIENCE
2015; 349 (6254): 1306-1310
Abstract
Metallic glasses are metallic alloys that exhibit exotic material properties. They may have fractal structures at the atomic level, but a physical mechanism for their organization without ordering has not been identified. We demonstrated a crossover between fractal short-range (<2 atomic diameters) and homogeneous long-range structures using in situ x-ray diffraction, tomography, and molecular dynamics simulations. A specific class of fractal, the percolation cluster, explains the structural details for several metallic-glass compositions. We postulate that atoms percolate in the liquid phase and that the percolating cluster becomes rigid at the glass transition temperature.
View details for DOI 10.1126/science.aab1233
View details for Web of Science ID 000361357700041
View details for PubMedID 26383945
-
A Novel Phase of Li15Si4 Synthesized under Pressure
ADVANCED ENERGY MATERIALS
2015; 5 (12)
View details for DOI 10.1002/aenm.201500214
View details for Web of Science ID 000356440900010
-
Pressure-induced phase transition in MnCO3 and its implications on the deep carbon cycle
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
2015; 120 (6): 4069-4079
View details for DOI 10.1002/2015JB011901
View details for Web of Science ID 000357993000005
-
Structural transition and amorphization in compressed alpha-Sb2O3
PHYSICAL REVIEW B
2015; 91 (18)
View details for DOI 10.1103/PhysRevB.91.184112
View details for Web of Science ID 000355090300003
-
High pressure: Compressed hydrogen heats up.
Nature materials
2015; 14 (5): 466-8
View details for DOI 10.1038/nmat4245
View details for PubMedID 25707021
-
Strain-induced modification of optical selection rules in lanthanide-based upconverting nanoparticles.
Nano letters
2015; 15 (3): 1891-1897
Abstract
NaYF4:Yb(3+),Er(3+) nanoparticle upconverters are hindered by low quantum efficiencies arising in large part from the parity-forbidden nature of their optical transitions and the nonoptimal spatial separations between lanthanide ions. Here, we use pressure-induced lattice distortion to systematically modify both parameters. Although hexagonal-phase nanoparticles exhibit a monotonic decrease in upconversion emission, cubic-phase particles experience a nearly 2-fold increase in efficiency. In-situ X-ray diffraction indicates that these emission changes require only a 1% reduction in lattice constant. Our work highlights the intricate relationship between upconversion efficiency and lattice geometry and provides a promising approach to modifying the quantum efficiency of any lanthanide upconverter.
View details for DOI 10.1021/nl504738k
View details for PubMedID 25647523
-
Pressure-Induced Conductivity and Yellow-to-Black Piezochromism in a Layered Cu-Cl Hybrid Perovskite.
Journal of the American Chemical Society
2015; 137 (4): 1673-1678
Abstract
Pressure-induced changes in the electronic structure of two-dimensional Cu-based materials have been a subject of intense study. In particular, the possibility of suppressing the Jahn-Teller distortion of d(9) Cu centers with applied pressure has been debated over a number of decades. We studied the structural and electronic changes resulting from the application of pressures up to ca. 60 GPa on a two-dimensional copper(II)-chloride perovskite using diamond anvil cells (DACs), through a combination of in situ powder X-ray diffraction, electronic absorption and vibrational spectroscopy, dc resistivity measurements, and optical observations. Our measurements show that compression of this charge-transfer insulator initially yields a first-order structural phase transition at ca. 4 GPa similar to previous reports on other Cu(II)-Cl perovskites, during which the originally translucent yellow solid turns red. Further compression induces a previously unreported phase transition at ca. 8 GPa and dramatic piezochromism from translucent red-orange to opaque black. Two-probe dc resistivity measurements conducted within the DAC show the first instance of appreciable conductivity in Cu(II)-Cl perovskites. The conductivity increases by 5 orders of magnitude between 7 and 50 GPa, with a maximum measured conductivity of 2.9 × 10(-4) S·cm(-1) at 51.4 GPa. Electronic absorption spectroscopy and variable-temperature conductivity measurements indicate that the perovskite behaves as a 1.0 eV band-gap semiconductor at 39.7 GPa and has an activation energy for electronic conduction of 0.232(1) eV at 40.2 GPa. Remarkably, all these changes are reversible: the material reverts to a translucent yellow solid upon decompression, and ambient pressure powder X-ray diffraction data taken before and after compression up to 60 GPa show that the original structure is maintained with minimal hysteresis.
View details for DOI 10.1021/ja512396m
View details for PubMedID 25580620
-
Strain-induced modification of optical selection rules in lanthanide-based upconverting nanoparticles
Nano Letters
2015: 1891–97
Abstract
NaYF4:Yb(3+),Er(3+) nanoparticle upconverters are hindered by low quantum efficiencies arising in large part from the parity-forbidden nature of their optical transitions and the nonoptimal spatial separations between lanthanide ions. Here, we use pressure-induced lattice distortion to systematically modify both parameters. Although hexagonal-phase nanoparticles exhibit a monotonic decrease in upconversion emission, cubic-phase particles experience a nearly 2-fold increase in efficiency. In-situ X-ray diffraction indicates that these emission changes require only a 1% reduction in lattice constant. Our work highlights the intricate relationship between upconversion efficiency and lattice geometry and provides a promising approach to modifying the quantum efficiency of any lanthanide upconverter.
View details for DOI 10.1021/nl504738k
-
Ultrafast visualization of crystallization and grain growth in shock-compressed SiO2.
Nature communications
2015; 6: 8191-?
Abstract
Pressure- and temperature-induced phase transitions have been studied for more than a century but very little is known about the non-equilibrium processes by which the atoms rearrange. Shock compression generates a nearly instantaneous propagating high-pressure/temperature condition while in situ X-ray diffraction (XRD) probes the time-dependent atomic arrangement. Here we present in situ pump-probe XRD measurements on shock-compressed fused silica, revealing an amorphous to crystalline high-pressure stishovite phase transition. Using the size broadening of the diffraction peaks, the growth of nanocrystalline stishovite grains is resolved on the nanosecond timescale just after shock compression. At applied pressures above 18 GPa the nuclueation of stishovite appears to be kinetically limited to 1.4±0.4 ns. The functional form of this grain growth suggests homogeneous nucleation and attachment as the growth mechanism. These are the first observations of crystalline grain growth in the shock front between low- and high-pressure states via XRD.
View details for DOI 10.1038/ncomms9191
View details for PubMedID 26337754
-
Tetrahedrally coordinated carbonates in Earth's lower mantle.
Nature communications
2015; 6: 6311-?
Abstract
Carbonates are the main species that bring carbon deep into our planet through subduction. They are an important rock-forming mineral group, fundamentally distinct from silicates in the Earth's crust in that carbon binds to three oxygen atoms, while silicon is bonded to four oxygens. Here we present experimental evidence that under the sufficiently high pressures and high temperatures existing in the lower mantle, ferromagnesian carbonates transform to a phase with tetrahedrally coordinated carbons. Above 80 GPa, in situ synchrotron infrared experiments show the unequivocal spectroscopic signature of the high-pressure phase of (Mg,Fe)CO3. Using ab-initio calculations, we assign the new infrared signature to C-O bands associated with tetrahedrally coordinated carbon with asymmetric C-O bonds. Tetrahedrally coordinated carbonates are expected to exhibit substantially different reactivity than low-pressure threefold coordinated carbonates, as well as different chemical properties in the liquid state. Hence, this may have significant implications for carbon reservoirs and fluxes, and the global geodynamic carbon cycle.
View details for DOI 10.1038/ncomms7311
View details for PubMedID 25692448
-
Compressed hydrogen heats up
Nature Materials
2015
View details for DOI 10.1038/nmat4245
-
Pressure induced metallization with absence of structural transition in layered molybdenum diselenide.
Nature communications
2015; 6: 7312-?
Abstract
Layered transition-metal dichalcogenides have emerged as exciting material systems with atomically thin geometries and unique electronic properties. Pressure is a powerful tool for continuously tuning their crystal and electronic structures away from the pristine states. Here, we systematically investigated the pressurized behavior of MoSe2 up to ∼60 GPa using multiple experimental techniques and ab-initio calculations. MoSe2 evolves from an anisotropic two-dimensional layered network to a three-dimensional structure without a structural transition, which is a complete contrast to MoS2. The role of the chalcogenide anions in stabilizing different layered patterns is underscored by our layer sliding calculations. MoSe2 possesses highly tunable transport properties under pressure, determined by the gradual narrowing of its band-gap followed by metallization. The continuous tuning of its electronic structure and band-gap in the range of visible light to infrared suggest possible energy-variable optoelectronics applications in pressurized transition-metal dichalcogenides.
View details for DOI 10.1038/ncomms8312
View details for PubMedID 26088416
-
Pressure induced metallization with absence of structural transition in layered molybdenum diselenide.
Nature communications
2015; 6: 7312-?
Abstract
Layered transition-metal dichalcogenides have emerged as exciting material systems with atomically thin geometries and unique electronic properties. Pressure is a powerful tool for continuously tuning their crystal and electronic structures away from the pristine states. Here, we systematically investigated the pressurized behavior of MoSe2 up to ∼60 GPa using multiple experimental techniques and ab-initio calculations. MoSe2 evolves from an anisotropic two-dimensional layered network to a three-dimensional structure without a structural transition, which is a complete contrast to MoS2. The role of the chalcogenide anions in stabilizing different layered patterns is underscored by our layer sliding calculations. MoSe2 possesses highly tunable transport properties under pressure, determined by the gradual narrowing of its band-gap followed by metallization. The continuous tuning of its electronic structure and band-gap in the range of visible light to infrared suggest possible energy-variable optoelectronics applications in pressurized transition-metal dichalcogenides.
View details for DOI 10.1038/ncomms8312
View details for PubMedID 26088416
-
High-pressure storage of hydrogen fuel: ammonia borane and its related compounds
CHINESE SCIENCE BULLETIN
2014; 59 (36): 5235-5240
View details for DOI 10.1007/s11434-014-0624-8
View details for Web of Science ID 000345381500012
-
Deviatoric stress-induced phase transitions in diamantane
JOURNAL OF CHEMICAL PHYSICS
2014; 141 (15)
Abstract
The high-pressure behavior of diamantane was investigated using angle-dispersive synchrotron x-ray diffraction (XRD) and Raman spectroscopy in diamond anvil cells. Our experiments revealed that the structural transitions in diamantane were extremely sensitive to deviatoric stress. Under non-hydrostatic conditions, diamantane underwent a cubic (space group Pa3) to a monoclinic phase transition at below 0.15 GPa, the lowest pressure we were able to measure. Upon further compression to 3.5 GPa, this monoclinic phase transformed into another high-pressure monoclinic phase which persisted to 32 GPa, the highest pressure studied in our experiments. However, under more hydrostatic conditions using silicone oil as a pressure medium, the transition pressure to the first high-pressure monoclinic phase was elevated to 7-10 GPa, which coincided with the hydrostatic limit of silicone oil. In another experiment using helium as a pressure medium, no phase transitions were observed to the highest pressure we reached (13 GPa). In addition, large hysteresis and sluggish transition kinetics were observed upon decompression. Over the pressure range where phase transitions were confirmed by XRD, only continuous changes in the Raman spectra were observed. This suggests that these phase transitions are associated with unit cell distortions and modifications in molecular packing rather than the formation of new carbon-carbon bonds under pressure.
View details for DOI 10.1063/1.4897252
View details for Web of Science ID 000344346000022
-
Deviatoric stress-induced phase transitions in diamantane.
journal of chemical physics
2014; 141 (15): 154305-?
Abstract
The high-pressure behavior of diamantane was investigated using angle-dispersive synchrotron x-ray diffraction (XRD) and Raman spectroscopy in diamond anvil cells. Our experiments revealed that the structural transitions in diamantane were extremely sensitive to deviatoric stress. Under non-hydrostatic conditions, diamantane underwent a cubic (space group Pa3) to a monoclinic phase transition at below 0.15 GPa, the lowest pressure we were able to measure. Upon further compression to 3.5 GPa, this monoclinic phase transformed into another high-pressure monoclinic phase which persisted to 32 GPa, the highest pressure studied in our experiments. However, under more hydrostatic conditions using silicone oil as a pressure medium, the transition pressure to the first high-pressure monoclinic phase was elevated to 7-10 GPa, which coincided with the hydrostatic limit of silicone oil. In another experiment using helium as a pressure medium, no phase transitions were observed to the highest pressure we reached (13 GPa). In addition, large hysteresis and sluggish transition kinetics were observed upon decompression. Over the pressure range where phase transitions were confirmed by XRD, only continuous changes in the Raman spectra were observed. This suggests that these phase transitions are associated with unit cell distortions and modifications in molecular packing rather than the formation of new carbon-carbon bonds under pressure.
View details for DOI 10.1063/1.4897252
View details for PubMedID 25338894
-
Bandgap closure and reopening in CsAuI3 at high pressure
PHYSICAL REVIEW B
2014; 89 (24)
View details for DOI 10.1103/PhysRevB.89.245109
View details for Web of Science ID 000336976400003
-
Pressure induced second-order structural transition in Sr3Ir2O7
JOURNAL OF PHYSICS-CONDENSED MATTER
2014; 26 (21)
View details for DOI 10.1088/0953-8984/26/21/215402
View details for Web of Science ID 000336245700008
-
Disproportionation of (Mg,Fe)SiO3 perovskite in Earth's deep lower mantle.
Science
2014; 344 (6186): 877-882
Abstract
The mineralogical constitution of the Earth's mantle dictates the geophysical and geochemical properties of this region. Previous models of a perovskite-dominant lower mantle have been built on the assumption that the entire lower mantle down to the top of the D″ layer contains ferromagnesian silicate [(Mg,Fe)SiO3] with nominally 10 mole percent Fe. On the basis of experiments in laser-heated diamond anvil cells, at pressures of 95 to 101 gigapascals and temperatures of 2200 to 2400 kelvin, we found that such perovskite is unstable; it loses its Fe and disproportionates to a nearly Fe-free MgSiO3 perovskite phase and an Fe-rich phase with a hexagonal structure. This observation has implications for enigmatic seismic features beyond ~2000 kilometers depth and suggests that the lower mantle may contain previously unidentified major phases.
View details for DOI 10.1126/science.1250274
View details for PubMedID 24855264
-
Tuning the crystal structure and electronic states of Ag2Se: Structural transitions and metallization under pressure
PHYSICAL REVIEW B
2014; 89 (18)
View details for DOI 10.1103/PhysRevB.89.180102
View details for Web of Science ID 000340626400001
-
Universal fractional noncubic power law for density of metallic glasses.
Physical review letters
2014; 112 (18): 185502-?
Abstract
As a fundamental property of a material, density is controlled by the interatomic distances and the packing of microscopic constituents. The most prominent atomistic feature in a metallic glass (MG) that can be measured is its principal diffraction peak position (q_{1}) observable by x-ray, electron, or neutron diffraction, which is closely associated with the average interatomic distance in the first shell. Density (and volume) would naturally be expected to vary under compression in proportion to the cube of the one-dimensional interatomic distance. However, by using high pressure as a clean tuning parameter and high-resolution in situ techniques developed specifically for probing the density of amorphous materials, we surprisingly found that the density of a MG varies with the 5/2 power of q_{1}, instead of the expected cubic relationship. Further studies of MGs of different compositions repeatedly produced the same fractional power law of 5/2 in all three MGs we investigated, suggesting a universal feature in MG.
View details for PubMedID 24856706
-
High Pressure Raman and X-ray Diffraction Study of [121] Tetramantane
JOURNAL OF PHYSICAL CHEMISTRY C
2014; 118 (14): 7683-7689
View details for DOI 10.1021/jp500431k
View details for Web of Science ID 000334571700050
-
Phase transitions in metastable phases of silicon
JOURNAL OF APPLIED PHYSICS
2014; 115 (10)
View details for DOI 10.1063/1.4868156
View details for Web of Science ID 000333083100023
-
Strain derivatives of T-c in HgBa2CuO4+delta: The CuO2 plane alone is not enough
PHYSICAL REVIEW B
2014; 89 (2)
View details for DOI 10.1103/PhysRevB.89.024515
View details for Web of Science ID 000332295200003
-
Five-dimensional visualization of phase transition in BiNiO3 under high pressure
APPLIED PHYSICS LETTERS
2014; 104 (4)
View details for DOI 10.1063/1.4863229
View details for Web of Science ID 000331209900069
-
Five-dimensional visualization of phase transition in BiNiO3 under high pressure.
Applied physics letters
2014; 104 (4): 043108
Abstract
Colossal negative thermal expansion was recently discovered in BiNiO3 associated with a low density to high density phase transition under high pressure. The varying proportion of co-existing phases plays a key role in the macroscopic behavior of this material. Here, we utilize a recently developed X-ray Absorption Near Edge Spectroscopy Tomography method and resolve the mixture of high/low pressure phases as a function of pressure at tens of nanometer resolution taking advantage of the charge transfer during the transition. This five-dimensional (X, Y, Z, energy, and pressure) visualization of the phase boundary provides a high resolution method to study the interface dynamics of high/low pressure phase.
View details for DOI 10.1063/1.4863229
View details for PubMedID 24753622
View details for PubMedCentralID PMC3977758
-
Evidence for photo-induced monoclinic metallic VO2 under high pressure
APPLIED PHYSICS LETTERS
2014; 104 (2)
View details for DOI 10.1063/1.4862197
View details for Web of Science ID 000330431000045
-
Pressure-induced densification in GeO2 glass: A transmission x-ray microscopy study
APPLIED PHYSICS LETTERS
2013; 103 (26)
View details for DOI 10.1063/1.4860993
View details for Web of Science ID 000329977400027
-
Elastic moduli of polycrystalline Li15Si4 produced in lithium ion batteries
JOURNAL OF POWER SOURCES
2013; 242: 732-735
View details for DOI 10.1016/j.jpowsour.2013.05.121
View details for Web of Science ID 000323628100092
-
High-pressure Raman spectroscopy of phase change materials
APPLIED PHYSICS LETTERS
2013; 103 (19)
View details for DOI 10.1063/1.4829358
View details for Web of Science ID 000327817000029
-
Formation of an interconnected network of iron melt at Earth's lower mantle conditions
NATURE GEOSCIENCE
2013; 6 (11): 971-975
View details for DOI 10.1038/NGEO1956
View details for Web of Science ID 000326505800023
-
Nanoscale Elemental Sensitivity Study of Nd2Fe14B Using Absorption Correlation Tomography
MICROSCOPY RESEARCH AND TECHNIQUE
2013; 76 (11): 1112-1117
Abstract
Transmission X-ray microscopy (TXM) is a rapidly developing technique with the capability of nanoscale three dimensional (3D) real-space imaging. Combined with the wide range in energy tunability from synchrotron sources, TXM enables the retrieval of 3D microstructural information with elemental/chemical sensitivity that would otherwise be inaccessible. The differential absorption contrast above and below absorption edges has been used to reconstruct the distributions of different elements, assuming the absorption edges of the interested elements are fairly well separated. Here we present an "Absorption Correlation Tomography" (ACT) method based on the correlation of the material absorption across multiple edges. ACT overcomes the significant limitation caused by overlapping absorption edges, significantly expands the capabilities of TXM, and makes it possible for fully quantitative nano-scale 3D structural investigation with chemical/elemental sensitivity. The capability and robustness of this new methodology is demonstrated in a case study of an important type of rare earth magnet (Nd₂Fe₁₄B).
View details for DOI 10.1002/jemt.22273
View details for Web of Science ID 000326023800003
View details for PubMedID 23922210
-
Bonding and electronic changes in rhodochrosite at high pressure
AMERICAN MINERALOGIST
2013; 98 (10): 1817-1823
View details for DOI 10.2138/am.2013.4497
View details for Web of Science ID 000326357400019
-
Symmetrization driven spin transition in epsilon-FeOOH at high pressure
EARTH AND PLANETARY SCIENCE LETTERS
2013; 379: 49-55
View details for DOI 10.1016/j.epsl.2013.08.012
View details for Web of Science ID 000327418800005
-
Pressure-induced structural transitions and metallization in Ag2Te
PHYSICAL REVIEW B
2013; 88 (2)
View details for DOI 10.1103/PhysRevB.88.024120
View details for Web of Science ID 000322677300001
-
Strength of iron at core pressures and evidence for a weak Earth's inner core
NATURE GEOSCIENCE
2013; 6 (7): 571-574
View details for DOI 10.1038/NGEO1808
View details for Web of Science ID 000321002700022
-
Sound velocities for hexagonally close-packed iron compressed hydrostatically to 136GPa from phonon density of states
GEOPHYSICAL RESEARCH LETTERS
2013; 40 (12): 2983-2987
View details for DOI 10.1002/grl.50588
View details for Web of Science ID 000321951300019
-
Elastic and inelastic behavior of graphitic C3N4 under high pressure
CHEMICAL PHYSICS LETTERS
2013; 575: 67-70
View details for DOI 10.1016/j.cplett.2013.04.065
View details for Web of Science ID 000320720500012
-
Three-dimensional coherent x-ray diffraction imaging of molten iron in mantle olivine at nanoscale resolution.
Physical review letters
2013; 110 (20): 205501
Abstract
We report quantitative 3D coherent x-ray diffraction imaging of a molten Fe-rich alloy and crystalline olivine sample, synthesized at 6 GPa and 1800 °C, with nanoscale resolution. The 3D mass density map is determined and the 3D distribution of the Fe-rich and Fe-S phases in the olivine-Fe-S sample is observed. Our results indicate that the Fe-rich melt exhibits varied 3D shapes and sizes in the olivine matrix. This work has potential for not only improving our understanding of the complex interactions between Fe-rich core-forming melts and mantle silicate phases but also paves the way for quantitative 3D imaging of materials at nanoscale resolution under extreme pressures and temperatures.
View details for DOI 10.1103/PhysRevLett.110.205501
View details for PubMedID 25167424
-
Three-Dimensional Coherent X-Ray Diffraction Imaging of Molten Iron in Mantle Olivine at Nanoscale Resolution
PHYSICAL REVIEW LETTERS
2013; 110 (20)
Abstract
We report quantitative 3D coherent x-ray diffraction imaging of a molten Fe-rich alloy and crystalline olivine sample, synthesized at 6 GPa and 1800 °C, with nanoscale resolution. The 3D mass density map is determined and the 3D distribution of the Fe-rich and Fe-S phases in the olivine-Fe-S sample is observed. Our results indicate that the Fe-rich melt exhibits varied 3D shapes and sizes in the olivine matrix. This work has potential for not only improving our understanding of the complex interactions between Fe-rich core-forming melts and mantle silicate phases but also paves the way for quantitative 3D imaging of materials at nanoscale resolution under extreme pressures and temperatures.
View details for DOI 10.1103/PhysRevLett.110.205501
View details for Web of Science ID 000319062300013
-
The effect of composition on pressure-induced devitrification in metallic glasses
APPLIED PHYSICS LETTERS
2013; 102 (17)
View details for DOI 10.1063/1.4803539
View details for Web of Science ID 000318553000021
-
Single-crystal structure determination of (Mg,Fe)SiO3 postperovskite
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2013; 110 (16): 6292-6295
Abstract
Knowledge of the structural properties of mantle phases is critical for understanding the enigmatic seismic features observed in the Earth's lower mantle down to the core-mantle boundary. However, our knowledge of lower mantle phase equilibria at high pressure (P) and temperature (T) conditions has been based on limited information provided by powder X-ray diffraction technique and theoretical calculations. Here, we report the in situ single-crystal structure determination of (Mg,Fe)SiO3 postperovskite (ppv) at high P and after temperature quenching in a diamond anvil cell. Using a newly developed multigrain single-crystal X-ray diffraction analysis technique in a diamond anvil cell, crystallographic orientations of over 100 crystallites were simultaneously determined at high P in a coarse-grained polycrystalline sample containing submicron ppv grains. Conventional single-crystal structural analysis and refinement methods were applied for a few selected ppv crystallites, which demonstrate the feasibility of the in situ study of crystal structures of submicron crystallites in a multiphase polycrystalline sample contained within a high P device. The similarity of structural models for single-crystal Fe-bearing ppv (~10 mol% Fe) and Fe-free ppv from previous theoretical calculations suggests that the Fe content in the mantle has a negligible effect on the crystal structure of the ppv phase.
View details for DOI 10.1073/pnas.1304402110
View details for Web of Science ID 000318041500023
View details for PubMedID 23576761
View details for PubMedCentralID PMC3631663
-
Pressure-induced symmetry breaking in tetragonal CsAuI3
PHYSICAL REVIEW B
2013; 87 (5)
View details for DOI 10.1103/PhysRevB.87.054104
View details for Web of Science ID 000314681400001
-
Pressure-induced tetragonal-orthorhombic phase transitions in CeRuPO
APPLIED PHYSICS LETTERS
2013; 102 (5)
View details for DOI 10.1063/1.4791690
View details for Web of Science ID 000314770300040
-
Novel pressure-induced phase transitions in Co3O4
APPLIED PHYSICS LETTERS
2013; 102 (4)
View details for DOI 10.1063/1.4790387
View details for Web of Science ID 000314723600034
-
Giant atomic displacement at a magnetic phase transition in metastable Mn3O4
PHYSICAL REVIEW B
2013; 87 (1)
View details for DOI 10.1103/PhysRevB.87.014417
View details for Web of Science ID 000313423300002
-
Nanoprobes for Deep Carbon
CARBON IN EARTH
2013; 75: 423-448
View details for DOI 10.2138/rmg.2013.75.13
View details for Web of Science ID 000322045500013
-
Lithographically fabricated gratings for the interferometric measurement of material shear moduli under extreme conditions
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B
2012; 30 (6)
View details for DOI 10.1116/1.4767323
View details for Web of Science ID 000311667300011
-
Pressure-induced tuning of a magnetic phase separation in Nd0.53Sr0.47MnO3
PHYSICAL REVIEW B
2012; 86 (9)
View details for DOI 10.1103/PhysRevB.86.094407
View details for Web of Science ID 000308392400002
-
Long-Range Ordered Carbon Clusters: A Crystalline Material with Amorphous Building Blocks
SCIENCE
2012; 337 (6096): 825-828
Abstract
Solid-state materials can be categorized by their structures into crystalline (having periodic translation symmetry), amorphous (no periodic and orientational symmetry), and quasi-crystalline (having orientational but not periodic translation symmetry) phases. Hybridization of crystalline and amorphous structures at the atomic level has not been experimentally observed. We report the discovery of a long-range ordered material constructed from units of amorphous carbon clusters that was synthesized by compressing solvated fullerenes. Using x-ray diffraction, Raman spectroscopy, and quantum molecular dynamics simulation, we observed that, although carbon-60 cages were crushed and became amorphous, the solvent molecules remained intact, playing a crucial role in maintaining the long-range periodicity. Once formed, the high-pressure phase is quenchable back to ambient conditions and is ultra-incompressible, with the ability to indent diamond.
View details for DOI 10.1126/science.1220522
View details for Web of Science ID 000307535600038
View details for PubMedID 22904007
-
Bonding and structural changes in siderite at high pressure
AMERICAN MINERALOGIST
2012; 97 (8-9): 1421-1426
View details for DOI 10.2138/am.2012.4001
View details for Web of Science ID 000307415100018
-
High pressure nano-tomography using an iterative method
6th International Conference on the Study of Matter at Extreme Conditions (SMEC)
AMER INST PHYSICS. 2012
View details for DOI 10.1063/1.4726249
View details for Web of Science ID 000305401400027
-
Families of Superhard Crystalline Carbon Allotropes Constructed via Cold Compression of Graphite and Nanotubes
PHYSICAL REVIEW LETTERS
2012; 108 (13)
Abstract
We report a general scheme to systematically construct two classes of structural families of superhard sp(3) carbon allotropes of cold-compressed graphite through the topological analysis of odd 5+7 or even 4+8 membered carbon rings stemmed from the stacking of zigzag and armchair chains. Our results show that the previously proposed M, bct-C(4), W and Z allotropes belong to our currently proposed families and that depending on the topological arrangement of the native carbon rings numerous other members are found that can help us understand the structural phase transformation of cold-compressed graphite and carbon nanotubes (CNTs). In particular, we predict the existence of two simple allotropes, R and P carbon, which match well the experimental x-ray diffraction patterns of cold-compressed graphite and CNTs, respectively, display a transparent wide-gap insulator ground state and possess a large Vickers hardness comparable to diamond.
View details for DOI 10.1103/PhysRevLett.108.135501
View details for Web of Science ID 000302019600007
View details for PubMedID 22540712
-
Ultrafast pump-probe measurements of short small-polaron lifetimes in the mixed-valence perovskite Cs2Au2I6 under high pressures
PHYSICAL REVIEW B
2012; 85 (8)
View details for DOI 10.1103/PhysRevB.85.081102
View details for Web of Science ID 000299901600002
-
Effect of pressure and composition on lattice parameters and unit-cell volume of (Fe,Mg)SiO3 post-perovskite
EARTH AND PLANETARY SCIENCE LETTERS
2012; 317: 120-125
View details for DOI 10.1016/j.epsl.2011.11.038
View details for Web of Science ID 000301616700012
-
Experimental and Theoretical Studies on a High Pressure Monoclinic Phase of Ammonia Borane
JOURNAL OF PHYSICAL CHEMISTRY C
2012; 116 (3): 2172-2178
View details for DOI 10.1021/jp206726t
View details for Web of Science ID 000299584400017
-
Crystal structures of (Mg1-x,Fe-x)SiO3 postperovskite at high pressures
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2012; 109 (4): 1035-1040
Abstract
X-ray diffraction experiments on postperovskite (ppv) with compositions (Mg(0.9)Fe(0.1))SiO(3) and (Mg(0.6)Fe(0.4))SiO(3) at Earth core-mantle boundary pressures reveal different crystal structures. The former adopts the CaIrO(3)-type structure with space group Cmcm, whereas the latter crystallizes in a structure with the Pmcm (Pmma) space group. The latter has a significantly higher density (ρ = 6.119(1) g/cm(3)) than the former (ρ = 5.694(8) g/cm(3)) due to both the larger amount of iron and the smaller ionic radius of Fe(2+) as a result of an electronic spin transition observed by X-ray emission spectroscopy (XES). The smaller ionic radius for low-spin compared to high-spin Fe(2+) also leads to an ordered cation distribution in the M1 and M2 crystallographic sites of the higher density ppv structure. Rietveld structure refinement indicates that approximately 70% of the total Fe(2+) in that phase occupies the M2 site. XES results indicate a loss of 70% of the unpaired electronic spins consistent with a low spin M2 site and high spin M1 site. First-principles calculations of the magnetic ordering confirm that Pmcm with a two-site model is energetically more favorable at high pressure, and predict that the ordered structure is anisotropic in its electrical and elastic properties. These results suggest that interpretations of seismic structure in the deep mantle need to treat a broader range of mineral structures than previously considered.
View details for DOI 10.1073/pnas.1118076108
View details for Web of Science ID 000299412600015
View details for PubMedID 22223656
View details for PubMedCentralID PMC3268314
-
Nanoscale diffraction imaging of the high-pressure transition in Fe1-xO
APPLIED PHYSICS LETTERS
2012; 100 (4)
View details for DOI 10.1063/1.3679117
View details for Web of Science ID 000300064500023
- Pressure induced stabilization of antiferromagnetic phase in Nd0.53Sr0.47MnO3 Physical Review B 2012; 86
-
Effect of Compressive Strain on the Raman Modes of the Dry and Hydrated BaCe0.8Y0.2O3 Proton Conductor
JOURNAL OF PHYSICAL CHEMISTRY C
2011; 115 (48): 24021-24027
View details for DOI 10.1021/jp208525j
View details for Web of Science ID 000297446300047
-
Amorphous Diamond: A High-Pressure Superhard Carbon Allotrope
PHYSICAL REVIEW LETTERS
2011; 107 (17)
Abstract
Compressing glassy carbon above 40 GPa, we have observed a new carbon allotrope with a fully sp(3)-bonded amorphous structure and diamondlike strength. Synchrotron x-ray Raman spectroscopy revealed a continuous pressure-induced sp(2)-to-sp(3) bonding change, while x-ray diffraction confirmed the perseverance of noncrystallinity. The transition was reversible upon releasing pressure. Used as an indenter, the glassy carbon ball demonstrated exceptional strength by reaching 130 GPa with a confining pressure of 60 GPa. Such an extremely large stress difference of >70 GPa has never been observed in any material besides diamond, indicating the high hardness of this high-pressure carbon allotrope.
View details for DOI 10.1103/PhysRevLett.107.175504
View details for Web of Science ID 000296984100007
View details for PubMedID 22107536
-
High-pressure EXAFS measurements of crystalline Ge using nanocrystalline diamond anvils
PHYSICAL REVIEW B
2011; 84 (1)
View details for DOI 10.1103/PhysRevB.84.014111
View details for Web of Science ID 000293180200002
-
Application of a new composite cubic-boron nitride gasket assembly for high pressure inelastic x-ray scattering studies of carbon related materials
REVIEW OF SCIENTIFIC INSTRUMENTS
2011; 82 (7)
Abstract
We have developed a new composite cubic-boron nitride (c-BN) gasket assembly for high pressure diamond anvil cell studies, and applied it to inelastic x-ray scattering (IXS) studies of carbon related materials in order to maintain a larger sample thickness and avoid the interference from the diamond anvils. The gap size between the two diamond anvils remained ~80 μm at 48.0 GPa with this new composite c-BN gasket assembly. The sample can be located at the center of the gap, ~20 μm away from the surface of both diamond anvils, which provides ample distance to separate the sample signal from the diamond anvils. The high pressure IXS of a solvated C(60) sample was studied up to 48 GPa, and a pressure induced bonding transition from sp(2) to sp(3) was observed at 27 GPa.
View details for DOI 10.1063/1.3607994
View details for Web of Science ID 000293498400030
View details for PubMedID 21806194
-
Compressional, temporal, and compositional behavior of H-2-O-2 compound formed by high pressure x-ray irradiation
JOURNAL OF CHEMICAL PHYSICS
2011; 134 (23)
Abstract
X-ray irradiation was found to convert H(2)O at pressures above 2 GPa into a novel molecular H(2)-O(2) compound. We used optical Raman spectroscopy to explore the behavior of x-ray irradiated H(2)O samples as a function of pressure, time, and composition. The compound was found to be stable over a period of two years, as long as high pressure conditions (>2 GPa) were maintained. The Raman shifts for the H(2) and O(2) vibrons behaved differently from pure H(2) and O(2) as pressure was increased on the compound up to 70 GPa, indicating that it remains a distinct, molecular compound. Based on spectra taken from different locations in a single sample, it appears that multiple forms of the H(2)-O(2) compound exist. The structure and composition of the starting material plays an important role in compound formation, as we found that hydrogen-filled ice clathrate C(2) (H(2))H(2)O did not undergo the same dissociation as observed in ice VII upon x-ray irradiation until pressure was increased to above 10 GPa.
View details for DOI 10.1063/1.3599479
View details for Web of Science ID 000291992500022
View details for PubMedID 21702562
-
Long-Range Topological Order in Metallic Glass
SCIENCE
2011; 332 (6036): 1404-1406
Abstract
Glass lacks the long-range periodic order that characterizes a crystal. In the Ce(75)Al(25) metallic glass (MG), however, we discovered a long-range topological order corresponding to a single crystal of indefinite length. Structural examinations confirm that the MG is truly amorphous, isotropic, and unstrained, yet under 25 gigapascals hydrostatic pressures, every segment of a centimeter-length MG ribbon devitrifies independently into a face-centered cubic (fcc) crystal with the identical orientation. By using molecular dynamics simulations and synchrotron x-ray techniques, we elucidate that the mismatch between the large Ce and small Al atoms frustrates the crystallization and causes amorphization, but a long-range fcc topological order still exists. Pressure induces electronic transition in Ce, which eliminates the mismatch and manifests the topological order by the formation of a single crystal.
View details for DOI 10.1126/science.1200324
View details for Web of Science ID 000291689000034
View details for PubMedID 21680837
-
Low temperature transport properties of Ce-Al metallic glasses
JOURNAL OF APPLIED PHYSICS
2011; 109 (11)
View details for DOI 10.1063/1.3587453
View details for Web of Science ID 000292214700078
-
Compressional Behavior of Bulk and Nanorod LiMn2O4 under Nonhydrostatic Stress
JOURNAL OF PHYSICAL CHEMISTRY C
2011; 115 (20): 9844-9849
View details for DOI 10.1021/jp112289h
View details for Web of Science ID 000290652200003
-
Studying single nanocrystals under high pressure using an x-ray nanoprobe
REVIEW OF SCIENTIFIC INSTRUMENTS
2011; 82 (4)
Abstract
In this report, we demonstrate the feasibility of applying a 250-nm focused x-ray beam to study a single crystalline NbSe(3) nanobelt under high-pressure conditions in a diamond anvil cell. With such a small probe, we not only resolved the distribution and morphology of each individual nanobelt in the x-ray fluorescence maps but also obtained the diffraction patterns from individual crystalline nanobelts with thicknesses of less than 50 nm. Single crystalline diffraction measurements on NbSe(3) nanobelts were performed at pressures up to 20 GPa.
View details for DOI 10.1063/1.3584881
View details for Web of Science ID 000290051500034
View details for PubMedID 21529021
-
Persistence of Jahn-Teller Distortion up to the Insulator to Metal Transition in LaMnO3
PHYSICAL REVIEW LETTERS
2011; 106 (6)
Abstract
High pressure, low temperature Raman measurements performed on LaMnO3 up to 34 GPa provide the first experimental evidence for the persistence of the Jahn-Teller distortion over the entire stability range of the insulating phase. This result resolves the ongoing debate about the nature of the pressure driven insulator to metal transition (IMT), demonstrating that LaMnO3 is not a classical Mott insulator. The formation of domains of distorted and regular octahedra, observed from 3 to 34 GPa, sheds new light on the mechanism behind the IMT suggesting that LaMnO3 becomes metallic when the fraction of undistorted octahedra domains increases beyond a critical threshold.
View details for DOI 10.1103/PhysRevLett.106.066402
View details for Web of Science ID 000287357100016
View details for PubMedID 21405481
-
Electronic Structure of Crystalline He-4 at High Pressures
PHYSICAL REVIEW LETTERS
2010; 105 (18)
Abstract
Using inelastic x-ray scattering techniques, we have succeeded in probing the high-pressure electronic structure of helium at 300 K. Helium has the widest known valence-conduction band gap of all materials a property whose high-pressure response has been inaccessible to direct measurements. We observed a rich electron excitation spectrum, including a cutoff edge above 23 eV, a sharp exciton peak showing linear volume dependence, and a series of excitations and continuum at 26 to 45 eV. We determined the electronic dispersion along the Γ-M direction over two Brillouin zones, and provided a quantitative picture of the helium exciton beyond the simplified Wannier-Frenkel description.
View details for DOI 10.1103/PhysRevLett.105.186404
View details for Web of Science ID 000283652100003
View details for PubMedID 21231121
-
High-pressure evolution of Fe2O3 electronic structure revealed by x-ray absorption
PHYSICAL REVIEW B
2010; 82 (14)
View details for DOI 10.1103/PhysRevB.82.144428
View details for Web of Science ID 000283117100008
-
Pressure-induced behavior of the hydrogen-dominant compound SiH4(H-2)(2) from first-principles calculations
PHYSICAL REVIEW B
2010; 82 (10)
View details for DOI 10.1103/PhysRevB.82.104115
View details for Web of Science ID 000282007200002
-
Size-Dependent Amorphization of Nanoscale Y2O3 at High Pressure
PHYSICAL REVIEW LETTERS
2010; 105 (9)
Abstract
Y2O3 with particle sizes ranging from 5 nm to 1 μm were studied at high pressure using x-ray diffraction and Raman spectroscopy techniques. Nanometer-sized Y2O3 particles are shown to be more stable than their bulk counterparts, and a grain size-dependent crystalline-amorphous transition was discovered in these materials. High-energy atomic pair distribution function measurements reveal that the amorphization is associated with the breakdown of the long-rang order of the YO6 octahedra, while the nearest-neighbor edge-shared octahedral linkages are preserved.
View details for DOI 10.1103/PhysRevLett.105.095701
View details for Web of Science ID 000281164200012
View details for PubMedID 20868175
-
Properties of polyamorphous Ce75Al25 metallic glasses
PHYSICAL REVIEW B
2010; 82 (5)
View details for DOI 10.1103/PhysRevB.82.054111
View details for Web of Science ID 000280961400002
-
Distortions and stabilization of simple-cubic calcium at high pressure and low temperature
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2010; 107 (22): 9965-9968
Abstract
Ca-III, the first superconducting calcium phase under pressure, was identified as simple-cubic (sc) by previous X-ray diffraction (XRD) experiments. In contrast, all previous theoretical calculations showed that sc had a higher enthalpy than many proposed structures and had an imaginary (unstable) phonon branch. By using our newly developed submicrometer high-pressure single-crystal XRD, cryogenic high-pressure XRD, and theoretical calculations, we demonstrate that Ca-III is neither exactly sc nor any of the lower-enthalpy phases, but sustains the sc-like, primitive unit by a rhombohedral distortion at 300 K and a monoclinic distortion below 30 K. This surprising discovery reveals a scenario that the high-pressure structure of calcium does not go to the zero-temperature global enthalpy minimum but is dictated by high-temperature anharmonicity and low-temperature metastability fine-tuned with phonon stability at the local minimum.
View details for DOI 10.1073/pnas.1005279107
View details for PubMedID 20479266
-
Elastic anisotropy of ferromagnesian post-perovskite in Earth's D '' layer
PHYSICS OF THE EARTH AND PLANETARY INTERIORS
2010; 180 (3-4): 203-208
View details for DOI 10.1016/j.pepi.2009.10.013
View details for Web of Science ID 000279186600012
-
Effect of composition, structure, and spin state on the thermal conductivity of the Earth's lower mantle
PHYSICS OF THE EARTH AND PLANETARY INTERIORS
2010; 180 (3-4): 148-153
View details for DOI 10.1016/j.pepi.2010.02.002
View details for Web of Science ID 000279186600005
-
Nanoprobe measurements of materials at megabar pressures
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2010; 107 (14): 6140-6145
Abstract
The use of nanoscale x-ray probes overcomes several key limitations in the study of materials up to multimegabar (> 200) pressures, namely, the spatial resolution of measurements of multiple samples, stress gradients, and crystal domains in micron to submicron size samples in diamond-anvil cells. Mixtures of Fe, Pt, and W were studied up to 282 GPa with 250-600 nm size synchrotron x-ray absorption and diffraction probes. The probes readily resolve signals from individual materials, between sample and gasket, and peak pressures, in contrast to the 5-microm-sized x-ray beams that are now becoming routine. The use of nanoscale x-ray beams also enables single-crystal x-ray diffraction studies in nominally polycrystalline samples at ultrahigh pressures, as demonstrated in measurements of (Mg,Fe)SiO(3) postperovskite. These capabilities have potential for driving a push toward higher maximum pressures and further miniaturization of high-pressure devices, in the process advancing studies at extreme conditions.
View details for DOI 10.1073/pnas.1001141107
View details for Web of Science ID 000276374400006
View details for PubMedID 20304801
View details for PubMedCentralID PMC2851990
-
Origin of Pressure-Induced Polyamorphism in Ce75Al25 Metallic Glass
PHYSICAL REVIEW LETTERS
2010; 104 (10)
Abstract
Using high-pressure synchrotron x-ray absorption spectroscopy, we observed the Ce 4f electron in Ce(75)Al(25) metallic glass transform from its ambient localized state to an itinerant state above 5 GPa. A parallel x-ray diffraction study revealed a volume collapse of about 8.6%, coinciding with 4f delocalization. The transition started from a low-density state below 1.5 GPa, went through continuous densification ending with a high-density state above 5 GPa. This new type of electronic polyamorphism in densely packed metallic glass is dictated by the Ce constituent, and is fundamentally distinct from the well-established structural polyamorphism in which densification is caused by coordination change and atomic rearrangement.
View details for DOI 10.1103/PhysRevLett.104.105702
View details for Web of Science ID 000275543500032
View details for PubMedID 20366436
-
High-pressure EXAFS study of vitreous GeO2 up to 44 GPa
PHYSICAL REVIEW B
2010; 81 (2)
View details for DOI 10.1103/PhysRevB.81.024201
View details for Web of Science ID 000274002100041
-
New Structure and Spin State of Iron-Rich (Mg,Fe)SiO3 Post-Perovskite
Joint AIRAPT-22 and HPCJ-50 Conference/International Conference on High Pressure Science and Technology
IOP PUBLISHING LTD. 2010
View details for DOI 10.1088/1742-6596/215/1/012100
View details for Web of Science ID 000292385100100
-
Bonding in boranes and their interaction with molecular hydrogen at extreme conditions
JOURNAL OF CHEMICAL PHYSICS
2009; 131 (14)
Abstract
The effects of high pressure and temperature on the bonding in ammonia borane (AB), NH(3)BH(3) and decaborane (DB), B(10)H(14) and their interactions with molecular hydrogen (H(2)) were investigated using Raman spectroscopy in a diamond anvil cell. At 0.7 GPa, AB becomes amorphous between 120 and 127 degrees C, indicating a positive Clapeyron slope. Heated to 140 degrees C, AB begins to undergo decomposition to polyaminoborane. The amorphous and decomposed AB does not recrystallize back to AB during slow cooling to room temperature or upon application of high pressure up to 3 GPa, underscoring the challenge of rehydrogenation of decomposed AB. The molecular Raman modes broaden in the reacted phase, and the NH(3) modes show no pressure dependence. DB was studied at room temperature up to 11 GPa. The observed frequency dependence with pressure (dnu/dP) and mode Gruneisen parameters varied for different spectral groups, and a new transition was identified at approximately 3 GPa. In both DB and heated AB, we found that they could store additional H(2) with the application of pressure. We estimate that we can store approximately 3 wt % H(2) in heated AB at 3 GPa and 1 wt % H(2) in DB at 4.5 GPa.
View details for DOI 10.1063/1.3244982
View details for Web of Science ID 000270825600027
View details for PubMedID 19831453
-
High pressure chemistry in the H-2-SiH4 system
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2009; 106 (35): 14763-14767
Abstract
Understanding the behavior of hydrogen-rich systems at extreme conditions has significance to both condensed matter physics, where it may provide insight into the metallization and superconductivity of element one, and also to applied research areas, where it can provide guidance for designing improved hydrogen storage materials for transportation applications. Here we report the high-pressure study of the SiH4-H2 binary system up to 6.5 GPa at 300 K in a diamond anvil cell. Raman measurements indicate significant intermolecular interactions between H2 and SiH4. We found that the H2 vibron frequency is softened by the presence of SiH4 by as much as 40 cm(-1) for the fluid with 50 mol% H2 compared with pure H2 fluid at the same pressures. In contrast, the Si-H stretching modes of SiH4 shift to higher frequency in the mixed fluid compared with pure SiH4. Pressure-induced solidification of the H2-SiH4 fluid shows a binary eutectic point at 72(+/-2) mol% H2 and 6.1(+/-0.1) GPa, above which the fluid crystallizes into a mixture of two nearly end-member solids. Neither solid has a pure end-member composition, with the silane-rich solid containing 0.5-1.5 mol% H2 and the hydrogen-rich solid containing 0.5-1 mol% SiH4. These two crystalline phases can be regarded as doped hydrogen-dominant compounds. We were able to superpressurize the sample by 0.2-0.4 GPa above the eutectic before complete crystallization, indicating extended metastability.
View details for DOI 10.1073/pnas.0907729106
View details for Web of Science ID 000269481000008
View details for PubMedID 19706419
View details for PubMedCentralID PMC2736422
-
Storage of molecular hydrogen in an ammonia borane compound at high pressure
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2009; 106 (20): 8113-8116
Abstract
We studied ammonia borane (AB), NH(3)BH(3), in the presence of excess hydrogen (H(2)) pressure and discovered a solid phase, AB(H(2))(x), where x approximately 1.3-2. The new AB-H(2) compound can store an estimated 8-12 wt % molecular H(2) in addition to the chemically bonded H(2) in AB. This phase formed slowly at 6.2 GPa, but the reaction rate could be enhanced by crushing the AB sample to increase its contact area with H(2). The compound has 2 Raman H(2) vibron peaks from the absorbed H(2) in this phase: one (nu(1)) at frequency 70 cm(-1) below the free H(2) vibron, and the other (nu(2)) at higher frequency overlapping with the free H(2) vibron at 6 GPa. The peaks shift linearly over the pressure interval of 6-16 GPa with average pressure coefficients of dnu(1)/dP = 4 cm(-1)/GPa and dnu(2)/dP = 6 cm(-1)/GPa. The formation of the compound is accompanied by changes in the N-H and B-H stretching Raman peaks resulting from the AB interactions with H(2) which indicate the structural complexity and low symmetry of this phase. Storage of significant amounts of additional molecular H(2) in AB increases the already high hydrogen content of AB, and may provide guidance for developing improved hydrogen storage materials.
View details for DOI 10.1073/pnas.0903511106
View details for Web of Science ID 000266209000007
View details for PubMedID 19416809
View details for PubMedCentralID PMC2688892
-
X-ray diffraction studies and equation of state of methane at 202 GPa
CHEMICAL PHYSICS LETTERS
2009; 473 (1-3): 72-74
View details for DOI 10.1016/j.cplett.2009.03.072
View details for Web of Science ID 000265270800014
-
Substitutional alloy of Ce and Al
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2009; 106 (8): 2515-2518
Abstract
The formation of substitutional alloys has been restricted to elements with similar atomic radii and electronegativity. Using high-pressure at 298 K, we synthesized a face-centered cubic disordered alloy of highly dissimilar elements (large Ce and small Al atoms) by compressing the Ce(3)Al intermetallic compound >15 GPa or the Ce(3)Al metallic glass >25 GPa. Synchrotron X-ray diffraction, Ce L(3)-edge absorption spectroscopy, and ab initio calculations revealed that the pressure-induced Kondo volume collapse and 4f electron delocalization of Ce reduced the differences between Ce and Al and brought them within the Hume-Rothery (HR) limit for substitutional alloying. The alloy remained after complete release of pressure, which was also accompanied by the transformation of Ce back to its ambient 4f electron localized state and reversal of the Kondo volume collapse, resulting in a non-HR alloy at ambient conditions.
View details for DOI 10.1073/pnas.0813328106
View details for Web of Science ID 000263652900011
View details for PubMedID 19188608
View details for PubMedCentralID PMC2650295
-
High-pressure induced phase transitions of Y2O3 and Y2O3:Eu3+
APPLIED PHYSICS LETTERS
2009; 94 (6)
View details for DOI 10.1063/1.3082082
View details for Web of Science ID 000263409400048
-
Raman spectroscopy study of ammonia borane at high pressure
JOURNAL OF CHEMICAL PHYSICS
2008; 129 (23)
Abstract
Ammonia borane, NH(3)BH(3), has attracted significant interest as a promising candidate material for hydrogen storage. The effect of pressure on the bonding in NH(3)BH(3) was investigated using Raman spectroscopy to over 20 GPa in a diamond anvil cell, and two new transitions were observed at approximately 5 and 12 GPa. Vibrational frequencies for the modes of the NH(3) proton donor group exhibited negative pressure dependence, which is consistent with the behavior of conventional hydrogen bonds, while the vibrational frequencies of the BH(3) proton acceptor group showed positive pressure dependence. The observed behavior of these stretching modes supports the presence of dihydrogen bonding at high pressure. In addition, the BH(3) and NH(3) bending modes showed an increase in spectral complexity with increasing pressure together with a discontinuity in d nu/d P which suggests rotational disorder in this molecule. These results may provide guidance for understanding and developing improved hydrogen storage materials.
View details for DOI 10.1063/1.3040276
View details for PubMedID 19102540
-
Experimental determination of the elasticity of iron at high pressure
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
2008; 113 (B9)
View details for DOI 10.1029/2007JB005229
View details for Web of Science ID 000259804900001
-
Cubic to tetragonal phase transformation in cold-compressed Pd nanocubes
NANO LETTERS
2008; 8 (3): 972-975
Abstract
Pd nanocubes with an average side length of approximately 10 nm were compressed up to 24.8 GPa in a diamond-anvil cell (DAC). In situ synchrotron X-ray diffraction was used to monitor structural changes, and a face-centered cubic (fcc) to face-centered tetragonal (fct) distortion was observed for the first time. This novel discovery not only provides new insights into the pressure-induced behavior of faceted nanocrystals of palladium and other noble metals but also gives guidance for finding new phases in close-packed metals.
View details for DOI 10.1021/nl0731217
View details for Web of Science ID 000253947400038
View details for PubMedID 18237151
-
Phase transformation in Sm2O3 at high pressure: In situ synchrotron X-ray diffraction study and ab initio DFT calculation
SOLID STATE COMMUNICATIONS
2008; 145 (5-6): 250-254
View details for DOI 10.1016/j.ssc.2007.11.019
View details for Web of Science ID 000253172600006
-
Hydrogen storage in molecular clathrates
CHEMICAL REVIEWS
2007; 107 (10): 4133-4151
View details for DOI 10.1021/cr050183d
View details for Web of Science ID 000249839900010
View details for PubMedID 17850164
-
Pressure-induced cubic to monoclinic phase transformation in erbium sesquioxide Er2O3
INORGANIC CHEMISTRY
2007; 46 (15): 6164-6169
Abstract
Cubic Er(2)O(3) was compressed in a symmetric diamond anvil cell at room temperature and studied in situ using energy-dispersive X-ray diffraction. A transition to a monoclinic phase began at 9.9 GPa and was complete at 16.3 GPa and was accompanied by a approximately 9% volume decrease. The monoclinic phase was stable up to at least 30 GPa and could be quenched to ambient conditions. The normalized lattice parameter compression data for both phases were fit to linear equations, and the volume compression data were fit to third-order Birch-Murnaghan equations of state. The zero-pressure isothermal bulk moduli (B(0)) and the first-pressure derivatives (B(0)') for the cubic and monoclinic phases were 200(6) GPa and 8.4 and also 202(2) GPa and 1.0, respectively. Ab initio density functional theory calculations were performed to determine optimized lattice parameters and atom positions for the cubic, monoclinic, and hexagonal phases of Er(2)O(3). The calculated X-ray spectra and predicted transition pressure are in good qualitative agreement with the experimental results.
View details for DOI 10.1021/ic070154g
View details for Web of Science ID 000248011300046
View details for PubMedID 17595073
-
High-pressure/low-temperature neutron scattering of gas inclusion compounds: Progress and prospects
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2007; 104 (14): 5727-5731
Abstract
Alternative energy resources such as hydrogen and methane gases are becoming increasingly important for the future economy. A major challenge for using hydrogen is to develop suitable materials to store it under a variety of conditions, which requires systematic studies of the structures, stability, and kinetics of various hydrogen-storing compounds. Neutron scattering is particularly useful for these studies. We have developed high-pressure/low-temperature gas/fluid cells in conjunction with neutron diffraction and inelastic neutron scattering instruments allowing in situ and real-time examination of gas uptake/release processes. We studied the formation of methane and hydrogen clathrates, a group of inclusion compounds consisting of frameworks of hydrogen-bonded H(2)O molecules with gas molecules trapped inside the cages. Our results reveal that clathrate can store up to four hydrogen molecules in each of its large cages with an intermolecular H(2)-H(2) distance of only 2.93 A. This distance is much shorter than that in the solid/metallic hydrogen (3.78 A), suggesting a strong densification effect of the clathrate framework on the enclosed hydrogen molecules. The framework-pressurizing effect is striking and may exist in other inclusion compounds such as metal-organic frameworks (MOFs). Owing to the enormous variety and flexibility of their frameworks, inclusion compounds may offer superior properties for storage of hydrogen and/or hydrogen-rich molecules, relative to other types of compounds. We have investigated the hydrogen storage properties of two MOFs, Cu(3)[Co(CN)(6)](2) and Cu(3)(BTC)(2) (BTC = benzenetricarboxylate), and our preliminary results demonstrate that the developed neutron-scattering techniques are equally well suited for studying MOFs and other inclusion compounds.
View details for DOI 10.1073/pnas.0610332104
View details for Web of Science ID 000245657600007
View details for PubMedID 17389387
-
Pressure-induced distortive phase transition in chromite-spinel at 29 GPa
Symposium on Materials Research at High Pressure held at the 2006 MRS Fall Meeting
MATERIALS RESEARCH SOCIETY. 2007: 179–184
View details for Web of Science ID 000246444000024
- Effect of iron on the properties of post-perovskite silicate, The Last Mantle Phase Transition edited by Hirose, K., Brodholt, J., Lay, T., Yuen, D. American Geophysical Union. 2007: 37–46
- Diamond Anvil Cells and Ultra-High P/T Experimental Methods Treatise on Geophysics edited by Price, G. D. Elsevier, Amsterdam. 2007: 231–267
- High-P/Low-T Neutron Scattering of Hydrogen Inclusion Compounds-Progress and Prospects Proceedings of the National Academy of Sciences 2007; 104: 5727-5731
- Clathrate hydrates under pressure Physics Today 2007; 60: 42-47
-
X-ray-induced dissociation of H2O and formation of an O-2-H-2 alloy at high pressure
SCIENCE
2006; 314 (5799): 636-638
Abstract
When subjected to high pressure and extensive x-radiation, water (H2O) molecules cleaved, forming O-O and H-H bonds. The oxygen (O) and hydrogen (H) framework in ice VII was converted into a molecular alloy of O2 and H2. X-ray diffraction, x-ray Raman scattering, and optical Raman spectroscopy demonstrated that this crystalline solid differs from previously known phases. It remained stable with respect to variations in pressure, temperature, and further x-ray and laser exposure, thus opening new possibilities for studying molecular interactions in the hydrogen-oxygen binary system.
View details for DOI 10.1126/science.1132884
View details for Web of Science ID 000241557800043
View details for PubMedID 17068259
-
Ultrahigh-pressure experiment with a motor-driven diamond anvil cell
JOURNAL OF PHYSICS-CONDENSED MATTER
2006; 18 (25): S1069-S1073
Abstract
A Pt sample was compressed to ultrahigh pressures in a diamond anvil cell (DAC) using a motorized gearbox to change pressure remotely from outside the synchrotron x-ray hutch. In situ angle-dispersive x-ray diffraction (XRD) was used to determine pressure from known equations of state (EOS). The sample position was unperturbed during motor-driven pressure changes. By eliminating the need to realign the sample to the x-ray position after each pressure increment, 142 XRD patterns could be collected continuously over the course of three hours, and the maximum pressure of 230 GPa was reached before diamond failure ended the experiment. We demonstrate the advantages of this motor-driven assembly for smooth and efficient pressure change, and the possibility for fine pressure and temporal resolution.
View details for DOI 10.1088/0953-8984/18/25/S13
View details for Web of Science ID 000238593000014
View details for PubMedID 22611097
-
The effect of pressure on the structure and volume of ferromagnesian post-perovskite
GEOPHYSICAL RESEARCH LETTERS
2006; 33 (12)
View details for DOI 10.1029/2006GL025770
View details for Web of Science ID 000237446600001
-
Iron-rich post-perovskite and the origin of ultralow-velocity zones
SCIENCE
2006; 312 (5773): 564-565
Abstract
The boundary layer between the crystalline silicate lower mantle and the liquid iron core contains regions with ultralow seismic velocities. Such low compressional and shear wave velocities and high Poisson's ratio are also observed experimentally in post-perovskite silicate phase containing up to 40 mol% FeSiO3 endmember. The iron-rich post-perovskite silicate is stable at the pressure-temperature and chemical environment of the core-mantle boundary and can be formed by core-mantle reaction. Mantle dynamics may lead to further accumulation of this material into the ultralow-velocity patches that are observable by seismology.
View details for DOI 10.1126/science.1123442
View details for Web of Science ID 000237296700041
View details for PubMedID 16645091
-
Phase relations of Fe-Ni alloys at high pressure and temperature
PHYSICS OF THE EARTH AND PLANETARY INTERIORS
2006; 155 (1-2): 146-151
View details for DOI 10.1016/j.pepi.2005.11.002
View details for Web of Science ID 000236422300012
- Ultrahigh pressure experiment with a motor-driven diamond anvil cell Journal of Physics: Condensed Matter 2006; 18: S1069-S1073
- Phase relations in Fe-Ni alloys at high pressure and temperature Physics of the Earth and Planetary Interiors 2006; 155: 146-151
-
Iron-rich silicates in the Earth's D '' layer
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2005; 102 (28): 9751-9753
Abstract
High-pressure experiments and theoretical calculations demonstrate that an iron-rich ferromagnesian silicate phase can be synthesized at the pressure-temperature conditions near the core-mantle boundary. The iron-rich phase is up to 20% denser than any known silicate at the core-mantle boundary. The high mean atomic number of the silicate greatly reduces the seismic velocity and provides an explanation to the low-velocity and ultra-low-velocity zones. Formation of this previously undescribed phase from reaction between the silicate mantle and the iron core may be responsible for the unusual geophysical and geochemical signatures observed at the base of the lower mantle.
View details for DOI 10.1073/pnas.0503737102
View details for Web of Science ID 000230545100005
View details for PubMedID 15994226
-
Pressure-temperature stability of the van der Waals compound (H-2)(4)CH4
CHEMICAL PHYSICS LETTERS
2005; 402 (1-3): 66-70
View details for DOI 10.1016/j.cplett.2004.11.133
View details for Web of Science ID 000226479900014
- The stability and Raman spectra of ikaite, CaCO3•6H2O, at high pressure and temperature American Mineralogist 2005; 90: 1835-1839
-
Ferromagnesian postperovskite silicates in the D '' layer of the Earth
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2004; 101 (45): 15867-15869
Abstract
Natural olivine with 12 mol % Fe(2)SiO(4) and synthetic orthopyroxenes with 20% and 40% FeSiO(3) were studied beyond the pressure-temperature conditions of the core-mantle boundary. All samples were found to convert entirely or partially into the CaIrO(3) postperovskite structure, which was recently reported for pure MgSiO(3). The incorporation of Fe greatly reduces the pressure needed for the transition and establishes the new phase as the major component of the D'' layer. With the liquid core as an unlimited reservoir of iron, core-mantle reactions could further enrich the iron content in this phase and explain the intriguing seismic signatures observed in the D'' layer.
View details for DOI 10.1073/pnas.0407135101
View details for Web of Science ID 000225196800010
View details for PubMedID 15520393
-
Structure and dynamics of hydrogen molecules in the novel clathrate hydrate by high pressure neutron diffraction
PHYSICAL REVIEW LETTERS
2004; 93 (12)
Abstract
The D2 clathrate hydrate crystal structure was determined as a function of temperature and pressure by neutron diffraction for the first time. The hydrogen occupancy in the (32+X)H2.136H(2)O, x=0-16 clathrate can be reversibly varied by changing the large (hexakaidecahedral) cage occupancy between two and four molecules, while remaining single occupancy of the small (dodecahedral) cage. Above 130-160 K, the guest D2 molecules were found in the delocalized state, rotating around the centers of the cages. Decrease of temperature results in rotation freezing followed by a complete localization below 50 K.
View details for DOI 10.1103/PhysRevLett.93.125503
View details for Web of Science ID 000223923800044
View details for PubMedID 15447276
-
Nuclear resonant x-ray scattering of iron hydride at high pressure
GEOPHYSICAL RESEARCH LETTERS
2004; 31 (15)
View details for DOI 10.1029/2004GL020541
View details for Web of Science ID 000223342500007
-
Hydrogen storage in molecular compounds
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2004; 101 (3): 708-710
Abstract
At low temperature (T) and high pressure (P), gas molecules can be held in ice cages to form crystalline molecular compounds that may have application for energy storage. We synthesized a hydrogen clathrate hydrate, H(2)(H(2)O)(2), that holds 50 g/liter hydrogen by volume or 5.3 wt %. The clathrate, synthesized at 200-300 MPa and 240-249 K, can be preserved to ambient P at 77 K. The stored hydrogen is released when the clathrate is warmed to 140 K at ambient P. Low T also stabilizes other molecular compounds containing large amounts of molecular hydrogen, although not to ambient P, e.g., the stability field for H(2)(H(2)O) filled ice (11.2 wt % molecular hydrogen) is extended from 2,300 MPa at 300 K to 600 MPa at 190 K, and that for (H(2))(4)CH(4) (33.4 wt % molecular hydrogen) is extended from 5,000 MPa at 300 K to 200 MPa at 77 K. These unique characteristics show the potential of developing low-T molecular crystalline compounds as a new means for hydrogen storage.
View details for Web of Science ID 000188555400004
View details for PubMedID 14711993
-
Phonon density of states and elastic properties of Fe-based materials under compression
3rd Nassau Mossbauer Conference on Development and Novel Application of the Technique to Science
SPRINGER. 2004: 3–15
View details for Web of Science ID 000220928000002
-
Generation of ultrahigh pressure using single-crystal chemical-vapor-deposition diamond anvils
APPLIED PHYSICS LETTERS
2003; 83 (25): 5190-5192
View details for DOI 10.1063/1.1636270
View details for Web of Science ID 000187341800024
-
Bonding changes in compressed superhard graphite
SCIENCE
2003; 302 (5644): 425-427
Abstract
Compressed under ambient temperature, graphite undergoes a transition at approximately 17 gigapascals. The near K-edge spectroscopy of carbon using synchrotron x-ray inelastic scattering reveals that half of the pi-bonds between graphite layers convert to sigma-bonds, whereas the other half remain as pi-bonds in the high-pressure form. The x-ray diffraction pattern of the high-pressure form is consistent with a distorted graphite structure in which bridging carbon atoms between graphite layers pair and form sigma-bonds, whereas the nonbridging carbon atoms remain unpaired with pi-bonds. The high-pressure form is superhard, capable of indenting cubic-diamond single crystals.
View details for Web of Science ID 000185963200036
View details for PubMedID 14564003
-
Displacive transition in magnesiowustite
JOURNAL OF PHYSICS-CONDENSED MATTER
2002; 14 (44): 11349-11354
View details for Web of Science ID 000179541700180
-
Hydrogen clusters in clathrate hydrate
SCIENCE
2002; 297 (5590): 2247-2249
Abstract
High-pressure Raman, infrared, x-ray, and neutron studies show that H2 and H2O mixtures crystallize into the sII clathrate structure with an approximate H2/H2O molar ratio of 1:2. The clathrate cages are multiply occupied, with a cluster of two H2 molecules in the small cage and four in the large cage. Substantial softening and splitting of hydrogen vibrons indicate increased intermolecular interactions. The quenched clathrate is stable up to 145 kelvin at ambient pressure. Retention of hydrogen at such high temperatures could help its condensation in planetary nebulae and may play a key role in the evolution of icy bodies.
View details for Web of Science ID 000178222000043
View details for PubMedID 12351785
-
Iron-nickel alloy in the Earth's Core
Geophysical Research Letters
2002; 29
View details for DOI 10.1029/2002GL015089