Professional Education


  • Doctor of Philosophy, University of Florida (2024)

Stanford Advisors


Current Research and Scholarly Interests


Advanced Manufacturing
Bioprinting
Tissue Engineering
Regenerative Medicine

All Publications


  • Printing fidelity improvement during immersion-phase-separation-based embedded printing of polymers ADDITIVE MANUFACTURING Zhou, C., Chen, Y., Shams, A. T., Jin, C., Huang, Y. 2026; 127
  • Biofabrication and biomedical manufacturing research frontiers in the United States BIO-DESIGN AND MANUFACTURING Chen, Y., Phillips, K. R., Alsberg, E., Angelini, T. E., Annabi, N., Atala, A., Bandyopadhyay, A., Bellan, L. M., Bertassoni, L. E., Blazeski, A., Boland, T., Bose, S., Burdick, J. A., Chang, R. C., Chen, C. S., Chen, R. K., Chrisey, D. B., Cosgriff-Hernandez, E., Dalton, P. D., Dean, D., Ding, A., Duan, B., Ferrer, M., Fisher, J. P., Forgacs, G., Ghosh, D., Grayson, W. L., Guvendiren, M., Habib, M., Heilshorn, S. C., Hicks, A., Hollister, S. J., Jin, C., Jin, Y., Kamm, R. D., Khoda, B., Langer, R., Laurencin, C. T., Lee, S., Leong, K. W., Leu, M. C., Li, W., Mak, M., Miri, A. K., Narayan, R. J., Ning, L., Ogle, B. M., Ozbolat, I. T., Pei, Z., Qiu, P., Saha, K., Saksena, J., Serpooshan, V., Shih, A., Shirwaiker, R. A., Soman, P., Tamayol, A., Tibitt, M. W., Xu, C., Yang, Y., Zhang, L., Yoo, J. J., Chen, S., Zhang, Y., Huang, Y. 2026
  • Self-supported vapor-induced phase-separation direct ink writing of 3D cellular lattices with subroutine-enabled tool path generation ADDITIVE MANUFACTURING Ryder, B. J., Robinson, J. T., Chen, Y., Badger, L. N., Sole-Gras, M., Li, G., Pilla, S., Huang, Y. 2026; 116
  • Deposition Volume Compensation for Enhanced Shape Fidelity in Nested Printing JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME Chen, Y., Samouce, C., Shlafer, S. E., Shams, A. T., Yamaguchi, H., Huang, Y. 2025; 147 (11)

    View details for DOI 10.1115/1.4069661

    View details for Web of Science ID 001592718200002

  • Design of Printable Gelatin Composite-PVA Bioink for Self-Supported Fabrication of 3D Thick Porous Constructs. ACS biomaterials science & engineering Wang, R., Chen, Y., Phillips, K. R., Zhou, C., Robinson, J. T., Iten, D. B., Ver Helst, D. Z., Huang, Y. 2025; 11 (10): 6234-6247

    Abstract

    The development of thick, permeable, three-dimensional (3D) constructs is essential for advancing tissue engineering applications that require efficient mass transport and prolonged cell viability. In this study, a printable gelatin composite-poly(vinyl alcohol) (PVA) bioink is designed and evaluated for the self-supported fabrication of 3D thick porous constructs with satisfactory permeability. The proposed bioink incorporates gelatin solution, gelatin microgels, and PVA, which is utilized as a sacrificial porogen to facilitate postprinting pore formation. The rheological properties of the bioink (the PVA-to-gelatin composite v/w ratio of 1:5) demonstrate suitable shear-thinning behavior and yield-stress fluid property for extrusion-based 3D printing, and the latter enables the jamming-based physical cross-linking mechanism during printing, which works with the thermal cross-linking of gelatin solution to retain the print shape for permanent enzymatic cross-linking. Printed constructs exhibit good print fidelity and structural integrity across both two-dimensional (2D) lattice and 3D tubular geometries. After PVA removal, the freeze-dried samples show large pores formed by removed PVA, as confirmed by scanning electron microscopy and pore size analysis. Permeability tests reveal that constructs fabricated with PVA porogen removal achieve a higher permeation rate of 1.39 mm/h. NIH 3T3 fibroblast-based cell viability studies demonstrate sustained cell survival in the 10.00 mm-thick porous constructs with cell viability above 75% over 7 days with the 2D cell viability control effect considered. Despite residual PVA detected postremoval, the porous network formed by PVA removal remains effective in supporting permeability and cellular function. These findings demonstrate the potential of the printable gelatin composite-PVA bioink for fabricating thick, permeable constructs suitable for cell culture and tissue engineering applications.

    View details for DOI 10.1021/acsbiomaterials.5c00888

    View details for PubMedID 40900020

  • Computed Tomography Image-Based Measurements of Cortical Bone Thickness for Improved Bone Tissue Processing and Decision-Making MANUFACTURING LETTERS Ungurait, D., Zhou, C., Hutt, K., Chen, Y., Poniatowski, A., Shaara, J., Howell, P., Huang, Y., Yamaguchi, H. 2025; 44: 148-156
  • Upflow mitigation strategy for nested printing CIRP ANNALS-MANUFACTURING TECHNOLOGY Chen, Y., Allo, S., Ren, B., Wu, Y., Yamaguchi, H., Huang, Y. 2024; 73 (1): 181-184
  • Sequential Dual Alignments Introduce Synergistic Effect on Hexagonal Boron Nitride Platelets for Superior Thermal Performance ADVANCED MATERIALS Chen, Y., Gao, Z., Hoo, S. A., Tipnis, V., Wang, R., Mitevski, I., Hitchcock, D., Simmons, K. L., Sun, Y., Sarntinoranont, M., Huang, Y. 2024; 36 (25)
  • Laponite nanoclay-modified sacrificial composite ink for perfusable channel creation via embedded 3D printing COMPOSITES PART B-ENGINEERING Ren, B., Song, K., Chen, Y., Murfee, W., Huang, Y. 2023; 263
  • Effects of spatial and temporal offset during landing on mixing performance in intersecting-jets printing ADDITIVE MANUFACTURING Sole-Gras, M., Christensen, K., Chen, Y., Liang, C., Mei, R., Wallace, D. B., Huang, Y. 2022; 55
  • A cutting force model based on kinematic analysis in longitudinal and torsional ultrasonic vibration drilling INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Lu, Y., Yuan, S., Chen, Y. 2019; 104 (1-4): 631-643
  • Application of Fusion Filtering Algorithm in AGV Localization Han, X., Wu, Y., Chen, Y., IEEE IEEE. 2017: 6340-6344