Stanford Advisors


  • Yi Cui, Postdoctoral Faculty Sponsor

All Publications


  • Discovering Underpotentially Deposited Crystalline Sodium Metal Nanoparticles on the Surface of Hard Carbon Anodes. Journal of the American Chemical Society Liu, Z., Serrao, C., Li, J., Cooney, I., Pintilie, G., Lee, J. H., Lee, J. K., Shuchi, S. B., Sarkar, P., Li, Y., Xu, X., Cui, Y., Yuan, X., Zheng, Q., Zhang, G., Roy, N., Zheng, X., Xu, G. L., Amine, K., Hwang, H. Y., Sinclair, R., Chiu, W., Cui, Y. 2026; 148 (44): 47856-47866

    Abstract

    Sodium-ion batteries are attractive candidates for low-cost and scalable energy storage in which hard carbon (HC) anodes are used. However, sodium (Na) metal plating in HC anodes at voltages above the plating potential remains a critical problem. The location and spatial distribution of crystalline sodium (c-Na) metal nanoparticles, the clusters associated with Na storage in HCs, are important for understanding this underpotential plating behavior but remain unclear. Here, we implement a cryogenic electron microscopy (cryo-EM) and electron tomography (cryo-ET) workflow that directly localizes c-Na metal clusters in sodiated HC samples: cryo-ET maps nanoscale three-dimensional (3D) distributions, while cryo-EM resolves local structure and chemistry. Our workflow reveals that c-Na metal clusters reside predominantly on the surfaces or near surfaces of individual HC particles. This finding challenges existing interpretations in the literature that locate the c-Na metal clusters within closed nanopores in the bulk of the HC, presumably because prior characterization using nonimaging techniques and two-dimensional (2D) projection images associated with traditional transmission electron microscopy (TEM) lacks the spatial 3D information necessary to resolve the full spatial distribution. Our discovery is an important step toward explaining the underpotential plating phenomenon of Na metal in HC anodes, suggesting that particle-level surface and near-surface interfaces are relevant targets to mitigate plating alongside bulk-pore, electrode, and electrolyte/interphase design.

    View details for DOI 10.1021/jacs.6c11841

    View details for PubMedID 43013009

  • Discovering Underpotentially Deposited Crystalline Sodium Metal Nanoparticles on the Surface of Hard Carbon Anodes JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Liu, Z., Serrao, C., Li, J., Cooney, I., Pintilie, G., Lee, J., Lee, J. K. J., Shuchi, S., Sarkar, P., Li, Y., Xu, X., Yuan, X., Zheng, Q., Zhang, G., Roy, N., Zheng, X., Xu, G., Amine, K., Hwang, H. Y., Sinclair, R., Chiu, W., Cui, Y. 2026
  • Upcycling nanoscale fragments in industrial waste liquids for aqueous battery electrolytes NATURE CHEMICAL ENGINEERING Chi, X., Li, Y., Zheng, Q., Zhang, P., Mao, H., Li, J., Zhang, G., Wang, J., Chen, Z., Su, H., Ravi, A., Cai, A., Liu, Z., Chen, Y., Feng, G., Wu, Y., Li, J., Guan, X., Zheng, X., Miao, Q., Liu, C., Cui, Y. 2026
  • Suspension Electrolyte for Protecting Aqueous Zinc Batteries From Calendar Aging ADVANCED ENERGY MATERIALS Wang, J., Guan, X., Su, H., Li, J., Zhang, P., Chi, X., Li, Y., Chen, Y., Chen, Z., Jagadeesan, S., Ravi, A., Mao, H., Kim, M., Zheng, X., Cui, Y. 2026

    View details for DOI 10.1002/aenm.71183

    View details for Web of Science ID 001807245300001

  • Atomic layer-deposited nucleation layers to control zinc morphology and suppress hydrogen evolution. Proceedings of the National Academy of Sciences of the United States of America Ravi, A., Shuchi, S. B., Feng, G., Li, Y., Zhang, P., Li, J., Liu, T. L., D'Acunto, G., Cai, A., Li, T., Sanroman Gutierrez, K. M., Liu, Z., Wang, J., Zhang, G., Lee, J. H., Lee, J., Xu, X., Guan, X., Zheng, X., Bent, S. F., Cui, Y. 2026; 123 (22): e2533390123

    Abstract

    Aqueous zinc (Zn) batteries are among the most promising candidates for safe, low-cost, and sustainable grid-scale energy storage. However, their practical application is significantly constrained by inhomogeneous Zn electrodeposition and the competitive hydrogen evolution reaction (HER). Here, we introduce an electrodeposition architecture to mitigate these challenges. Using atomic layer deposition, we coat the copper current collector with ZnO and Al2O3 nanofilms-positioned below the plated Zn. Our strategy marks a significant departure from previous works in which thin films are situated above Zn foil to function as artificial solid electrolyte interphases. Notably, we achieve substantial performance improvements with our 2-nm-thick ZnO coatings, including long cycle life (>1,400 cycles) and high Coulombic efficiencies (>99.8%). Our mechanistic investigation suggests that these improvements arise from HER suppression and controlled Zn morphology. This work offers an interface engineering approach to fundamentally understand Zn nucleation and growth processes. We anticipate that our electrodeposition architecture could be applied to enhance the cyclability of other aqueous battery systems.

    View details for DOI 10.1073/pnas.2533390123

    View details for PubMedID 42190004

  • Three-dimensional and nanoscale resolved hierarchical structure of electroplated zinc complex in aqueous zinc battery. National science review Li, J., Guan, X., Wang, J., Zhang, G., Holoubek, J., Cui, Y., Li, Y., Wang, H., Chiu, W., Cui, Y. 2026; 13 (9): nwag114

    Abstract

    Aqueous zinc batteries offer safety and cost-effectiveness for grid-scale energy storage although the electrochemical and chemical corrosion of zinc in water results in complex Zn species and 3D morphology, ultimately degrading battery performance. Thus far, the atomic and nanoscale 3D structure of the electroplated Zn complex remains unclear. Here, by employing advanced transmission electron microscopy, particularly cryogenic electron tomography, we resolve the preserved 3D architecture of electroplated zinc. A hierarchical solid-electrolyte interphase (SEI) comprising two critical structures that could impact battery performance is delineated-an epitaxial ZnO nanolayer on a Zn nanoplate as the inner SEI and petal-like zinc hydroxide sulfate (ZHS) flakes emerging from the edges of a Zn-ZnO crystal as the extended SEI. We discovered three epitaxial conditions of ZnO on electrochemically plated Zn nanocrystals: (0001)ZnO ∥ (0001)Zn, (10[Formula: see text]0)ZnO ∥ (10[Formula: see text]0)Zn and (0001)ZnO ∥ (10[Formula: see text]0)Zn. This complex Zn-ZnO-ZHS structure implies a correlation between the zinc-crystal edges and the heterogeneous chemical environment, which can be correlated with the zinc-texture- dependent battery performance.

    View details for DOI 10.1093/nsr/nwag114

    View details for PubMedID 42157869

    View details for PubMedCentralID PMC13182254

  • Kaolin-derived zeolite enables high-performance carbon capture with gigaton-scale potential. National science review Li, J., Li, J., Fang, S., Zhang, G., Zhang, P., Shum, S., Zhang, Z., Cui, Y. 2026; 13 (8): nwag064

    Abstract

    Gigaton-scale carbon dioxide (CO2) capture is an indispensable part of the way towards global carbon neutrality, but has lagged in developing an adsorbent that simultaneously has high performance, low cost, and scalability from earth-abundant raw materials coupled with industrially compatible synthesis processes. Here we discover that high-performing CO2 adsorbent of Linde Type A (LTA) zeolite can be converted from ubiquitous kaolin clay (reserves >30 gigatons) via scalable processes and exhibits record high CO2 uptake with good cycling stability. The synthesis route, comprising mainly calcination and a hyperthermal reaction, is readily compatible with existing industrial infrastructure and avoids the use of complex or toxic chemicals. Benefiting from an optimized crystal structure for CO2 trapping, the material achieves CO2 adsorption capacities that surpass all previously reported clay-derived zeolites across a wide concentration range, from ambient air (∼400 ppm) to flue gas conditions (<20%). It also maintains stable performance over 50 adsorption-desorption cycles. Beyond material and method development, we provide a proof-of-concept showing that integrating radiative cooling for CO2 adsorption and solar heating for sorbent regeneration could enable a low-carbon pathway for passive sorbent operation. This study offers a feasible route to explore scalable carbon capture using widely available materials and passive energy strategies.

    View details for DOI 10.1093/nsr/nwag064

    View details for PubMedID 42064842

    View details for PubMedCentralID PMC13127140

  • Scalable Carbon Dioxide Capture Using Clay-Derived Zeolites via Atomic Rearrangement. Journal of the American Chemical Society Li, J., Li, J., Fang, S., Lyu, H., Yuan, L., Guan, X., Feng, G., Chi, X., Mao, H., Wu, Y., Li, Y., Liu, Z., Zhang, Z., Catrysse, P., Dionne, J., Fan, S., Cui, Y. 2026

    Abstract

    Effective carbon capture materials are crucial for mitigating climate change and supporting sustainable industrial processes. However, developing scalable, cost-effective adsorbents with high carbon dioxide capacity, superior selectivity, and long-term stability remains a major challenge. Here, we report the scalable synthesis of Linde Type A zeolite via atomic reassembly of halloysite clay using mature industrial processes, achieving a high carbon dioxide adsorption capacity of 5.0 mmol g-1 with good cyclic stability. The transformation from a layered to a cubic framework with enlarged vacant spaces significantly enhances carbon dioxide accommodation. Additionally, the as-prepared zeolite demonstrates outstanding carbon dioxide/nitrogen selectivity (178 for 5% carbon dioxide) and robust thermal stability over multiple adsorption-desorption cycles. In situ tests reveal that adsorption is primarily governed by weakly bound interactions, allowing for the easy regeneration. This study presents a promising and scalable strategy for developing high-performance adsorbents toward gigaton-scale carbon dioxide capture applications.

    View details for DOI 10.1021/jacs.5c20976

    View details for PubMedID 41736194

  • NiSO4-Driven In Situ Alloy Formation To Unlock Highly Reversible Iron Electrochemistry in Aqueous Batteries. Journal of the American Chemical Society Feng, G., Liu, Z., Li, J., Li, Y., Guan, X., Ravi, A., Liu, C., Chi, X., Ai, H., Zheng, X., Cui, Y. 2026

    Abstract

    Grid-scale stationary energy storage requires technologies that are both safe and economically viable. Iron (Fe) metal-based aqueous batteries offer an attractive option owing to the abundance, low cost, and environmental benignity of iron, but their development has been hampered by uncontrolled hydrogen evolution and poor reversibility of iron plating and stripping. Here, we report using nickel sulfate (NiSO4) as an electrolyte additive to induce the in situ formation of a FeNi3 alloy interphase during early cycling. This alloy lowers the Fe nucleation barrier and promotes uniform iron deposition. Moreover, dynamic codeposition and stripping of Ni with Fe sustains fast reaction kinetics and stabilizes the alloy interphase during long-term cycling. As a result, Fe||Fe symmetric cells achieve over 3000 h of stable cycling, nearly an order of magnitude improvement over the baseline electrolyte. Fe||Cu cells with NiSO4 additives enable stable long-term cycling with a high average Coulombic efficiency (CE) of ∼99.4%, while the control electrolyte rapidly fails with an average CE of 82.9%. These findings demonstrate that functional electrolyte additives and the controlled alloying interphase provide a viable pathway to high-performance, cost-effective iron metal-based aqueous batteries for large-scale energy storage.

    View details for DOI 10.1021/jacs.5c15954

    View details for PubMedID 41593008

  • Epitaxial Electrodeposition of Fe with Controlled In-Plane Variants for a Reversible Metal Anode in an Aqueous Electrolyte. Nano letters Sui, C., Fu, C. T., Feng, G., Li, Y., Li, J., Yan, G., Hsu, P. C., Chu, S., Cui, Y. 2026

    Abstract

    The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here we demonstrate a strategy to realize epitaxial electrodeposition of iron (Fe) on single-crystal copper (Cu) substrates in aqueous electrolytes. We compare the electrodeposition behavior of Fe on polycrystalline and single-crystalline Cu substrates, revealing that the latter enables highly uniform, dense, and crystallographically aligned Fe growth. Comprehensive electron backscatter diffraction and X-ray diffraction analyses confirm the formation of Fe with specific out-of-plane and in-plane orientations, including well-defined rotational variants. Our findings highlight that epitaxial electrodeposition of Fe can suppress dendritic growth and significantly enhance the Coulombic efficiency during plating/stripping cycles. This approach bridges fundamental crystallography with practical electrochemical performance, providing a pathway toward high-efficiency aqueous batteries utilizing Earth-abundant materials.

    View details for DOI 10.1021/acs.nanolett.5c05270

    View details for PubMedID 41513252

  • High Pressure-Based Synthesis of Nanoporous Metal-Organic Framework ZIF-93 Giving Rise to a Phase for Proton Conduction ACS APPLIED NANO MATERIALS Perez-Miana, M., Fernandez de Luis, R., Fidalgo-Marijuan, A., Li, J., Mayoral, A., Coronas, J. 2025; 8 (43): 20713-20725

    Abstract

    This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to "high-pressure"), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn-(C5N2OH5)2·1.2-(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn-(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4 + and NO3 - ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10-3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here.

    View details for DOI 10.1021/acsanm.5c03130

    View details for Web of Science ID 001595982000001

    View details for PubMedID 41195329

    View details for PubMedCentralID PMC12584345

  • Capacity recovery by transient voltage pulse in silicon-anode batteries. Science (New York, N.Y.) Yang, Y., Biswas, S., Xu, R., Xiao, X., Xu, X., Zhang, P., Gong, H., Zheng, X., Peng, Y., Li, J., Ai, H., Wu, Y., Ye, Y., Gao, X., Serrao, C., Zhang, W., Sayavong, P., Huang, Z., Chen, Z., Cui, Y., Vilá, R. A., Boyle, D. T., Cui, Y. 2024; 386 (6719): 322-327

    Abstract

    In the quest for high-capacity battery electrodes, addressing capacity loss attributed to isolated active materials remains a challenge. We developed an approach to substantially recover the isolated active materials in silicon electrodes and used a voltage pulse to reconnect the isolated lithium-silicon (LixSi) particles back to the conductive network. Using a 5-second pulse, we achieved >30% of capacity recovery in both Li-Si and Si-lithium iron phosphate (Si-LFP) batteries. The recovered capacity sustains and replicates through multiple pulses, providing a constant capacity advantage. We validated the recovery mechanism as the movement of the neutral isolated LixSi particles under a localized nonuniform electric field, a phenomenon known as dielectrophoresis.

    View details for DOI 10.1126/science.adn1749

    View details for PubMedID 39418354

  • Silanol-Stabilized Atomically Dispersed Pt<SUP>δ+</SUP>-O<i><sub>x</sub></i>-Sn Active Sites in Protozeolite for Propane Dehydrogenation JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Li, J., Zhang, Q., He, G., Zhang, T., Li, L., Li, J., Hao, D., Zhang, W., Terasaki, O., Mei, D., Yu, J. 2024; 146 (35): 24358-24367

    Abstract

    Crystalline zeolites have been proven to be excellent supports for confining subnanometric metal catalysts to boost the propane dehydrogenation (PDH) reaction. However, the introduced metallic species may suffer from severe sintering and limited stability during the catalytic process, especially when utilizing an industrial impregnation method for metal incorporation. In this study, we developed a new type of support based on amorphous protozeolite (PZ), taking advantage of its adjustable silanol chemistry and zeolitic microporous characteristic for stabilizing atomically dispersed PtSn catalyst via a simple, cost-effective coimpregnation process. The combination of X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy under CO atmosphere, and density functional theory calculations confirmed the formation of highly dispersed active Ptδ+-Ox-Sn species in PtSn/PZ. The PtSn/PZ catalyst exhibited a high propane conversion of 45.4% and a high propylene selectivity of 99% (WHSV= 3.6 h-1, 550 °C), with a high apparent rate coefficient of 565 molC3H6·gPt-1·h-1·bar-1 at a high WHSV of 108 h-1, presenting a top-level performance among the state-of-the-art Pt-based catalysts prepared by in situ synthesis and impregnation methods. The silanol density determined the chemical state of PtSn species, showing a change from atomically dispersed Ptδ+-Ox-Sn sites to PtSn alloy with decreasing silanol density of supports. This work provides a general strategy using silanol-rich amorphous protozeolite as support for stabilizing various metal catalysts by the simple impregnation method and also offers an effective way for fine tailoring the chemical state of metallic species via a silanol-engineered approach.

    View details for DOI 10.1021/jacs.4c05727

    View details for Web of Science ID 001296538900001

    View details for PubMedID 39167721

  • Cu-OFF/ERI Zeolite: Intergrowth Structure Synergistically Boosting Selective Catalytic Reduction of NO<sub><i>x</i> </sub> with NH<sub>3</sub> JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Han, J., Li, J., Zhao, W., Li, L., Chen, M., Ge, X., Wang, S., Liu, Q., Mei, D., Yu, J. 2024; 146 (11): 7605-7615

    Abstract

    Cu-SSZ-13 has been commercialized for selective catalytic reduction with ammonia (NH3-SCR) to remove NOx from diesel exhaust. As its synthesis usually requires toxic and costly organic templates, the discovery of alternative Cu-based zeolite catalysts with organotemplate-free synthesis and comparable or even superior NH3-SCR activity to that of Cu-SSZ-13 is of great academic and industrial significance. Herein, we demonstrated that Cu-T with an intergrowth structure of offretite (OFF) and erionite (ERI) synthesized by an organotemplate-free method showed better catalytic performance than Cu-ERI and Cu-OFF as well as Cu-SSZ-13. Structure characterizations and density functional theory calculations indicated that the intergrowth structure promoted more isolated Cu2+ located at the 6MR of the intergrowth interface, resulting in a better hydrothermal stability of Cu-T than Cu-ERI and Cu-OFF. Strikingly, the low-temperature activity of Cu-T significantly increased after hydrothermal aging, while that of Cu-ERI and Cu-OFF substantially decreased. Based on in situ diffuse reflectance infrared Fourier transform spectra analysis and density functional theory calculations, the reason can be attributed to the fact that NH4NO3 formed on the CuxOy species within ERI polymorph of Cu-T underwent a fast SCR reaction pathway with the assistance of Brønsted acid sites at the intergrowth interfaces under standard SCR reaction conditions. Significantly, Cu-T exhibited a wider temperature window at a catalytic activity of over 90% than Cu-SSZ-13 (175-550 vs 175-500 °C for fresh and 225-500 vs 250-400 °C for hydrothermal treatment). This work provides a new direction for the design of high-performance NH3-SCR catalysts in terms of the interplay of the intergrowth structure of zeolites.

    View details for DOI 10.1021/jacs.3c13855

    View details for Web of Science ID 001183919900001

    View details for PubMedID 38467427

  • Complete Metal Recycling from Lithium-Ion Batteries Enabled by Hydrogen Evolution Catalyst Reconstruction JOURNAL OF THE AMERICAN CHEMICAL SOCIETY Zhang, Y., Li, J., Zhao, W., Yan, T., Zhang, L., Zhang, W., Mei, D., Yu, J. 2023; 145 (50): 27740-27747

    Abstract

    Mass adoption of electric vehicles and the depletion of finite metal resources make it imperative to recycle lithium-ion batteries (LIBs). However, current recycling routes of pyrometallurgy and hydrometallurgy are mainly developed for LiCoO2 and suffer from great energy inputs and extensive processing; thus, alternative versatile and green approaches are in urgent demand. Here, we report an ingenious and versatile strategy for recycling LIBs via catalyst reconstruction, using hydrogen evolution reaction as a proof of concept. Layered, spinel, and polyanion oxide cathode materials, as catalysts, are structurally transformed into hydroxides assisted by protons or hydroxide ions, facilitating complete metal extraction (e.g., Li, Co, Ni, Mn, Fe) with high leaching efficiencies approaching 100%. This recycling method is generally applicable to almost all commercial cathode systems and extended to actual spent pouch cells. Such a green hydrogen coupling approach provides a versatile and sustainable alternative to conventional approaches and has a broad impact beyond battery recycling.

    View details for DOI 10.1021/jacs.3c10188

    View details for Web of Science ID 001128265600001

    View details for PubMedID 38059924

  • Can NbO Keep <i>nbo</i> Topology under Electrons? -Unveiling Novel Aspects of Niobium Monoxide at the Atomic Scale CHEMISTRY-A EUROPEAN JOURNAL Li, C., Li, J., Zhou, Y., Zhang, Q., Mayoral, A., Li, G., Terasaki, O. 2023; 29 (33): e202300614

    Abstract

    A precise investigation of NbO has been carried out by advanced electron microscopy combined with powder and single crystal X-ray diffraction (XRD). The structure of pristine NbO has been determined as Pm-3 m space group (SG) with a = 4.211 Å and the positions of Nb and O at the 3c and 3d Wyckoff positions, respectively, which is consistent with previous report based on powder XRD data. Electron beams induced a structural transition, which was investigated and explained by combining electron diffraction and atomic-resolution imaging. The results revealed that the electron beam stimulated both Nb and O atom-migrations within each fcc sublattice, and that the final structure was SG Fm-3 m with a = 4.29 Å, Nb and O at the 4a and 4b with 75 % occupancy and same chemical composition. Antiphase planar defects were discovered in the pristine NbO and related to the structural transformation. Theoretical calculations performed by density functional theory (DFT) supported the experimental conclusions.

    View details for DOI 10.1002/chem.202300614

    View details for Web of Science ID 000977018300001

    View details for PubMedID 37013359

  • <i>In Situ</i> Three-Dimensional Electron Diffraction for Probing Structural Transformations of Single Nanocrystals CHEMISTRY OF MATERIALS Wu, S., Li, J., Ling, Y., Sun, T., Fan, Y., Yu, J., Terasaki, O., Ma, Y. 2022
  • Andersson-Magneli Phases Ti<sub>n</sub>O<sub>2n-1</sub>: Recent Progress Inspired by Swedish Scientists ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE Zhang, Q., Liu, W., Zhou, Y., Li, J., Sun, T., Liu, Q., Ma, Y., Wang, J., Li, J., Zhao, R., Sui, Y., Matsumoto, T., Muroyama, N., Yamano, A., Harris, K. D. M., Shen, Z., Terasaki, O. 2021; 647 (2-3): 126-133
  • Electron Microscopy Studies of Local Structural Modulations in Zeolite Crystals ANGEWANDTE CHEMIE-INTERNATIONAL EDITION Zhang, Q., Mayoral, A., Li, J., Ruan, J., Alfredsson, V., Ma, Y., Yu, J., Terasaki, O. 2020; 59 (44): 19403-19413

    Abstract

    Zeolites are widely used in catalysis, gas separation, ion exchange, etc. due to their superior physicochemical properties, which are closely related to specific features of their framework structures. Although more than two hundred different framework types have been recognized, it is of great interest to explore from a crystallographic perspective, the atomic positions, surface terminations, pore connectivity and structural defects that deviate from the ideal framework structures, namely local structural modulation. In this article, we review different types of local modulations in zeolite frameworks using various techniques, especially electron microscopy (EM). The most recent advances in resolving structural information at the atomic level with aberration corrected EM are also presented, commencing a new era of gaining atomic structural information, not only for all tetrahedral atoms including point vacancies in framework but also for extra-framework cations and surface terminations.

    View details for DOI 10.1002/anie.202007490

    View details for Web of Science ID 000556374100001

    View details for PubMedID 32608155

    View details for PubMedCentralID PMC7689863

  • A Green Selective Water-Etching Approach to MOF@Mesoporous SiO<sub>2</sub> Yolk-Shell Nanoreactors with Enhanced Catalytic Stabilities MATTER Bao, S., Li, J., Guan, B., Jia, M., Terasaki, O., Yu, J. 2020; 3 (2): 498-508
  • Structure Solution and Defect Analysis of an Extra-Large Pore Zeolite with UTL Topology by Electron Microscopy JOURNAL OF PHYSICAL CHEMISTRY LETTERS Li, J., Zhang, C., Jiang, J., Yu, J., Terasaki, O., Mayoral, A. 2020; 11 (9): 3350-3356

    Abstract

    Defects within zeolites are crucially important for explaining their physicochemical behavior. The UTL zeolite, with a pillared layer structure, has been widely used in zeolite crystal engineering to assemble new structures from its layered structural units, but a fundamental understanding of its defect is lacking. Here, we report a newly synthesized UTL framework zeolite, UTL-DBU, with a commercially available superbase 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a template. Its structure was determined by a combination of three-dimensional electron diffraction tomography and high-resolution (scanning) transmission electron microscopy. Using transmission electron microscopy, two types of defects, stacking disorder and edge dislocation-like planar defect, were discovered. On the basis of the analysis of the electron diffraction and imaging, the layer stacking sequence together with the structural and mathematical models of the microtwinning was successfully built up. Unraveling these defects will provide new insights into the rational design of targeted zeolites utilizing UTL.

    View details for DOI 10.1021/acs.jpclett.0c00551

    View details for Web of Science ID 000535177500026

    View details for PubMedID 32191486