School of Engineering


Showing 31-40 of 45 Results

  • Srabanti Chowdhury

    Srabanti Chowdhury

    Professor of Electrical Engineering, Senior Fellow at the Precourt Institute for Energy and Professor, by courtesy, of Materials Science and Engineering

    Current Research and Scholarly InterestsWide bandap materials & devices for RF, Power and energy efficient electronics

  • William Chueh

    William Chueh

    Director, Precourt Institute for Energy, Kimmelman Professor, Professor of Materials Science and Engineering, of Energy Science and Engineering, and Senior Fellow at the Precourt Institute for Energy

    BioThe availability of low-cost but intermittent renewable electricity (e.g., derived from solar and wind) underscores the grand challenge to store and dispatch energy so that it is available when and where it is needed. Redox-active materials promise the efficient transformation between electrical, chemical, and thermal energy, and are at the heart of carbon-neutral energy cycles. Understanding design rules that govern materials chemistry and architecture holds the key towards rationally optimizing technologies such as batteries, fuel cells, electrolyzers, and novel thermodynamic cycles. Electrochemical and chemical reactions involved in these technologies span diverse length and time scales, ranging from Ångströms to meters and from picoseconds to years. As such, establishing a unified, predictive framework has been a major challenge. The central question unifying our research is: “can we understand and engineer redox reactions at the levels of electrons, ions, molecules, particles and devices using a bottom-up approach?” Our approach integrates novel synthesis, fabrication, characterization, modeling and analytics to understand molecular pathways and interfacial structure, and to bridge fundamentals to energy storage and conversion technologies by establishing new design rules.

  • John M. Cioffi

    John M. Cioffi

    Hitachi America Professor in the School of Engineering, Emeritus

    Current Research and Scholarly InterestsCioffi researches and teaches in the area of digital transmission. He introduced the basic transmission methods that are a foundation for all modern broadband internet connectivity, which corresponding patents are Stanford Engineering's all-time #2 royalty generator (after #1 search engine). Roughly half his career was spent in industry during various periods as Stanford student or faculty. He has been primary advisor for over 90 Stanford PhD students, and taught communications to 1000's.

  • Stephen Clarke

    Stephen Clarke

    Basic Life Research Scientist

    BioStephen E. Clarke, PhD, is a postdoctoral scholar in the Brain Interfacing Lab, Department of Bioengineering. He obtained a BSc in Mathematics from the University of New Brunswick, and a PhD in Neuroscience from the University of Ottawa. His research draws on combined experimental and computational expertise to explore neuronal information processing on multiple scales, and across species. His long-term research goals involve application of closed-loop brain machine interface technologies as a platform for neurorehabilitation and repair in motor and cognitive systems, leveraging both insights from basic neuroscience and exciting new implant technologies.

    Research Interests: Sensory and Motor Systems Neuroscience, Computational Neuroscience, Cellular and Molecular Neuroscience, Applied Mathematics, Neurorehabilitation and Repair.

  • Jennifer R. Cochran

    Jennifer R. Cochran

    Vice President for SLAC National Accelerator Laboratory and for Strategic Initiatives, Addie and Al Macovski Professor, Professor of Bioengineering and, by courtesy, of Chemical Engineering

    Current Research and Scholarly InterestsMolecular Engineering, Protein Biochemistry, Biotechnology, Cell and Tissue Engineering, Molecular Imaging, Chemical Biology

  • Todd Coleman

    Todd Coleman

    Associate Professor of Bioengineering and, by courtesy, of Electrical Engineering

    BioTodd P. Coleman is an Associate Professor in the Department of Bioengineering, and by courtesy, Electrical Engineering at Stanford University. He received B.S. degrees in electrical engineering (summa cum laude), as well as computer engineering (summa cum laude) from the University of Michigan (Go Blue). He received M.S. and Ph.D. degrees from MIT in electrical engineering and computer science. He did postdoctoral studies at MIT and Mass General Hospital in quantitative neuroscience. He previously was a faculty member in the Departments of Electrical & Computer Engineering and Bioengineering at the University of Illinois, Urbana-Champaign, and the University of California, San Diego, respectively. Dr. Coleman’s research is very multi-disciplinary, using tools from applied probability, physiology, and bioelectronics. Examples include, for instance, optimal transport methods in high-dimensional uncertainty quantification and developing technologies and algorithms to monitor and modulate physiology of the nervous systems in the brain and visceral organs. He has served as a Principal Investigator on grants from the NSF, NIH, Department of Defense, and multiple private foundations. Dr. Coleman is an inventor on 10 granted US patents. He has been selected as a Gilbreth Lecturer for the National Academy of Engineering, a TEDMED speaker, and a Fellow of IEEE as well as the American Institute for Medical and Biological Engineering. He recently served as Chair of the National Academies Standing Committee on Biotechnology Capabilities and National Security Needs.

  • Steven Hartley Collins

    Steven Hartley Collins

    Associate Professor of Mechanical Engineering and, by courtesy, of Bioengineering

    BioSteve Collins is an Associate Professor of Mechanical Engineering at Stanford University, where he teaches courses on design and robotics and directs the Stanford Biomechatronics Laboratory. His primary focus is to speed and systematize the design and prescription of prostheses and exoskeletons using versatile device emulator hardware and human-in-the-loop optimization algorithms (Zhang et al. 2017, Science). Another interest is efficient autonomous devices, such as highly energy-efficient walking robots (Collins et al. 2005, Science) and exoskeletons that use no energy yet reduce the metabolic energy cost of human walking (Collins et al. 2015, Nature).

    Prof. Collins received his B.S. in Mechanical Engineering in 2002 from Cornell University, where he performed undergraduate research on passive dynamic walking robots. He received his Ph.D. in Mechanical Engineering in 2008 from the University of Michigan, where he performed research on the dynamics and control of human walking. He performed postdoctoral research on humanoid robots at T. U. Delft in the Netherlands. He was a professor of Mechanical Engineering and Robotics at Carnegie Mellon University for seven years. In 2017, he joined the faculty of Mechanical Engineering at Stanford University.

    Prof. Collins is a member of the Scientific Board of Dynamic Walking and the Editorial Board of Science Robotics. He has received the Young Scientist Award from the American Society of Biomechanics, the Best Medical Devices Paper from the International Conference on Robotics and Automation, and the student-voted Professor of the Year in his department.

  • Daniel Norbert Congreve

    Daniel Norbert Congreve

    Assistant Professor of Electrical Engineering

    BioDan is an Assistant Professor in the Department of Electrical Engineering at Stanford University. Prior to Stanford, Dan received his B.S. and M.S. from Iowa State in 2011, working with Vik Dalal studying defect densities of nano-crystalline and amorphous silicon. He then received his PhD from MIT in Electrical Engineering in 2015, studying under Marc Baldo. His thesis work focused on photonic energy conversion using singlet fission and triplet fusion as downconverting and upconverting processes, respectively. He spent a year as a postdoc with Will Tisdale in Chemical Engineering at MIT studying perovskite nanoplatelets. He joined the Rowland Institute in 2016 as a Rowland Fellow before starting at Stanford in 2020. Dan is a Moore Inventor Fellow, Sloan Research Fellow, Intel Rising Star, and co-founder of Quadratic3D, a startup looking to commercialize 3D printing technologies. His current research interests focus on engineering nanomaterials to solve challenging problems.

  • Richard Cottle

    Richard Cottle

    Professor of Management Science and Engineering, Emeritus

    BioRichard W. (Dick) Cottle was born in Chicago in 1934. He received his elementary and high school education in the neighboring village of Oak Park. Dick enrolled at Harvard College to take up political science and premedical studies in order to become a physician (or possibly a foreign service officer if that didn't work out). As it happened, both of these alternatives were abandoned because he was strongly attracted to mathematics and ultimately received his bachelor's degree in that field. He stayed on at Harvard and received the master's degree in mathematics in 1958. This was the Sputnik era, and Dick was moved by a passion to teach secondary-level mathematics. In the first of a series of fateful decisions, he joined the Mathematics Department at the Middlesex School in Concord, Massachusetts where for two years he taught grades 7-12. Midway through this period he married his wife Suzanne (Sue). At this time he began to think of returning to graduate school for a doctorate in mathematics. He decided to study geometry at the University of California at Berkeley and was admitted there. Just before leaving Middlesex, Dick received a telephone call from the Radiation Laboratory at Berkeley offering him the part- time job as a computer programmer for which he had applied. Through this job, he became aware of linear and quadratic programming and the contributions of George Dantzig and Philip Wolfe. Before long, Dick left the Rad Lab to join Dantzig's team at the Operations Research Center at UC Berkeley. Under the tutelage of George Dantzig (and the late Edmund Eisenberg), Dick developed a symmetric duality theory and what was then called the "composite problem". These topics along with a reëxamination of the Fritz John conditions, formed the core of his doctoral dissertation. The composite problem involved a fusion of the primal and dual first-order optimality conditions. It was realized that the resulting inequality system could be studied without reference to the primal-dual structure out of which it was born. The name "complementarity problem" was suggested by Dick and introduced in a joint paper with Habetler and Lemke. After Berkeley, Dick's work took two closely related directions. One was the study of quadratic programming; the other was what we now call "linear complementarity". The interesting role played by classes of matrices in both these areas has always held a special fascination for Dick. In quadratic programming, for instance, with Jacques Ferland he obtained characterizations of quasi- and pseudo-convexity of quadratic functions. Dick (and others) were quick to recognize the importance of matrix classes in linear complementarity theory. It was he who proposed the name "copositive-plus" for a matrix class that arose in Lemke's seminal paper of 1965. The name first appeared in the classic paper of Cottle and Dantzig called "Complementary Pivot Theory of Mathematical Programming". The subjects of quadratic programming and linear complementarity (and the associated matrix theory) remain central to his research interests.