Craig Levin
Professor of Radiology (Molecular Imaging Program at Stanford/Nuclear Medicine) and, by courtesy, of Physics, of Electrical Engineering and of Bioengineering
Radiology - Rad/Molecular Imaging Program at Stanford
Web page: http://miil.stanford.edu
Bio
Dr. Craig S. Levin is a Professor of Radiology and, by Courtesy, of Physics, Electrical Engineering, and Bioengineering at Stanford. He is a founding member of the Molecular Imaging Program at Stanford, and Principal Investigator and Director of the NIH-NCI funded T32 Stanford Molecular Imaging Scholars postdoctoral training program. He received his M.S., M.Phil, and Ph.D. degrees in Physics from Yale University. An internationally recognized researcher in the field of molecular imaging he has nearly 200 peer-reviewed publications and 40 patents awarded or pending. He directs a 20-member laboratory that explores new concepts in instrumentation and software algorithms for molecular imaging, introduces these new tools into clinical and pre-clinical imaging studies of cancer, heart disease and neurological disorders, and partners with industry to disseminate some of these technologies into products used for patient care throughout the world. To support his research, he has generated substantial NIH funding as Principal Investigator in addition to numerous grants from other government, industry, and private institutions. He lectured in a Nobel symposium in 2007, and was elected into the American Institute for Medical and Biological Engineering’s College of Fellows and was given the Academy of Radiology Research Distinguished Investigator Recognition Award.
Academic Appointments
-
Professor (By courtesy), Electrical Engineering
-
Professor (By courtesy), Physics
-
Professor (By courtesy), Bioengineering
-
Member, Bio-X
-
Member, Cardiovascular Institute
-
Member, Stanford Cancer Institute
Administrative Appointments
-
Director and PI of the Stanford Molecular Imaging Scholars Postdoctoral Training Program, Stanford University (2009 - 2026)
-
Chair of Faculty Search Committee, Department of Radiology (2009 - 2010)
-
Chair of Faculty Search Committee, Department of Radiology (2008 - 2009)
-
Chair of Faculty Search Committee, Department of Radiology (2007 - 2008)
-
Chair of Faculty Search Committee, Department of Radiology (2006 - 2007)
-
Co-Director, Stanford Center for Innovation in In Vivo Imaging (2004 - Present)
Honors & Awards
-
Phi Eta Sigma National Honors, University of California at Los Angeles (1981)
-
Physics, Mathematics, and College Honors Programs, University of Calfornia at Los Angeles (1981-5)
-
Stanford Linear Accelerator Center Undergraduate Fellowship, University of California at Los Angeles (1983)
-
Phi Beta Kappa National Honors, University of California at Los Angeles (1984)
-
Marilyn F. Lohr Award in Physics, University of California at Los Angeles (1984)
-
E. Lee Kinsey Award in Physics, University of Calfornia at Los Angeles (1985)
-
Sherwood Prize in Mathematics, University of California at Los Angeles (1985)
-
B.S. Summa Cum Laude, University of California at Los Angeles (1985)
-
Sigma Pi Sigma National Honors in Physics, University of California at Los Angeles (1985)
-
Full Tuition and Research Fellowship, Yale University (1985-93)
-
Bates Graduate Fellowship, Jonathan Edwards College, Yale University (1987-91)
-
National Research Service Award, National Institutes of Health (1993-5)
-
Pilot Research Award, Society of Nuclear Medicine (1996)
Professional Education
-
Ph.D., Yale University, Physics (1993)
-
M.Phil., Yale University, Physics (1987)
-
M.S., Yale University, Physics (1987)
-
B.S., UCLA, Physics and Mathematics (1985)
Current Research and Scholarly Interests
Molecular Imaging Instrumentation Laboratory
Our research interests involve the development of novel instrumentation and software algorithms for in vivo imaging of cellular and molecular signatures of disease in humans and small laboratory animal subjects. These new cameras efficiently image radiation emissions in the form of positrons, annihilation photons, gamma rays, and light from molecular probes developed to target molecular signals from deep within tissue of live subjects. The goals of the instrumentation projects are to push the sensitivity and spatial, spectral, and/or temporal resolutions as far as physically possible. The algorithm goals are to understand the physical system comprising the subject tissues, radiation transport, and imaging system, and to provide the best available image quality and quantitative accuracy. The work involves computer modeling, position sensitive sensors, readout electronics, data acquisition, image formation, image processing, and data/image analysis algorithms, and incorporating these innovations into practical imaging devices. The ultimate goal is to introduce these new imaging tools into studies of molecular mechanisms and treatments of disease within living subjects.
Clinical Trials
-
Efficacy of Gamma Camera Used Intraoperatively for ID of Sentinel Lymph Nodes w/ Lymphoscintigraphy
Not Recruiting
This study evaluates the ability of a prototype intraoperative handheld gamma camera (pIHGC) to image (detect) sentinel lymph nodes (SLNs) in melanoma and breast cancer during surgical excision, as compared to standard of care intraoperative gamma probes (GP). The unit of study in this trial was SNLs rather individual participants. Each device was assessed for relative node detection sensitivity (S) of those SLNs.
Stanford is currently not accepting patients for this trial. For more information, please contact Mike YaO, (312) 543 - 5207.
2024-25 Courses
- Physics and Engineering Principles of Multi-modality Molecular Imaging of Living Subjects
BIOE 222, BMP 222, RAD 222 (Aut) - Physics and Engineering of Radionuclide-based Medical Imaging
BIOE 221, BMP 221, RAD 221 (Win) -
Independent Studies (18)
- Bioengineering Problems and Experimental Investigation
BIOE 191 (Aut, Win, Spr) - Directed Investigation
BIOE 392 (Aut, Win, Spr) - Directed Reading in Biophysics
BIOPHYS 399 (Aut, Win, Spr, Sum) - Directed Reading in Radiology
RAD 299 (Aut, Win, Spr, Sum) - Directed Studies in Applied Physics
APPPHYS 290 (Aut, Win, Spr) - Directed Study
BIOE 391 (Aut, Win, Spr) - Early Clinical Experience in Radiology
RAD 280 (Aut, Win, Spr, Sum) - Graduate Research
BIOPHYS 300 (Aut, Win, Spr, Sum) - Graduate Research
BMP 399 (Aut, Win, Spr, Sum) - Graduate Research
RAD 399 (Aut, Win, Spr, Sum) - Medical Scholars Research
RAD 370 (Aut, Win, Spr, Sum) - Readings in Radiology Research
RAD 101 (Aut, Win, Spr, Sum) - Research
PHYSICS 490 (Aut, Win, Spr) - Special Studies and Reports in Electrical Engineering
EE 191 (Aut, Win, Spr) - Special Studies and Reports in Electrical Engineering
EE 391 (Aut, Win, Spr) - Special Studies and Reports in Electrical Engineering (WIM)
EE 191W (Aut, Win, Spr) - Special Studies or Projects in Electrical Engineering
EE 390 (Aut, Win, Spr) - Undergraduate Research
RAD 199 (Aut, Win, Spr, Sum)
- Bioengineering Problems and Experimental Investigation
-
Prior Year Courses
2023-24 Courses
- Physics and Engineering Principles of Multi-modality Molecular Imaging of Living Subjects
BIOE 222, BMP 222, RAD 222 (Aut)
2022-23 Courses
- Physics and Engineering Principles of Multi-modality Molecular Imaging of Living Subjects
BIOE 222, BMP 222, RAD 222 (Aut)
2021-22 Courses
- Physics and Engineering Principles of Multi-modality Molecular Imaging of Living Subjects
BIOE 222, RAD 222 (Aut)
- Physics and Engineering Principles of Multi-modality Molecular Imaging of Living Subjects
Stanford Advisees
-
Postdoctoral Faculty Sponsor
Meysam Dadgar, Wen He, Muhammad Nasir Ullah, Zhixiang Zhao -
Doctoral Dissertation Advisor (AC)
Myungheon(Young) Chin, Jonathan Fisher, West Foster, Sarah Zou
All Publications
-
PETcoil: first results from a second-generation RF-penetrable TOF-PET brain insert for simultaneous PET/MRI.
Physics in medicine and biology
2024
Abstract
Simultaneous PET/MRI provides concurrent information about anatomic, functional, and molecular changes in disease. We are developing a second generation MR-compatible RF-penetrable TOF-PET insert. The insert has a smaller scintillation crystal size and ring diameter compared to clinical whole-body PET scanners, resulting in higher spatial resolution and sensitivity. This paper reports the initial system performance of this full-ring PET insert. The global photopeak energy resolution and global coincidence time resolution, 11.74 ± 0.03 % FWHM and 238.1 ± 0.5 ps FWHM, respectively, are preserved as we scaled up the system to a full ring comprising 12,288 LYSO-SiPM channels. Throughout a ten-hour experiment, the system performance remained stable, exhibiting a less than 1% change in all measured parameters. In a resolution phantom study, the system successfully resolved all 2.8 mm diameter rods, achieving an average VPR of 0.28 ± 0.08 without TOF and 0.24 ± 0.07 with TOF applied. Moreover, the implementation of TOF in the Hoffman phantom study also enhanced image quality. Initial MR compatibility studies of the full PET ring were performed with it unpowered as a milestone to focus on looking for material and geometry-related artifacts. During all MR studies, the MR body coil functioned as both the transmit and receive coil, and no observable artifacts were detected. As expected, using the body coil also as the RF receiver, MR image signal-to-noise ratio exhibited degradation (∼30%), so we are developing a high quality receive-only coil that resides inside the PET ring.
View details for DOI 10.1088/1361-6560/ad7221
View details for PubMedID 39168156
-
Self-normalization for a 1-mm3resolution clinical PET system using deep learning.
Physics in medicine and biology
2024
Abstract
Normalization in positron emission tomography (PET) corrects for non-uniformity of sensitivity across all system lines of response (LOR). Self-normalization is a framework that aims to estimate normalization components from the emission data without a separate scan of a normalization phantom. In this work, we propose for the first time an image-based end-to-end self-normalization framework using conditional generative adversarial networks (cGAN). We evaluated different approaches by exploring each of the following three methodologies. First, we used images that were either unnormalized or corrected for geometric factors, which encompass all time-invariant factors, as input data types. Second, we set the input tensor shape as either a single axial slice (2-D) or three contiguous axial slices (2.5-D). Third, we chose either Pix2Pix or polarized self-attention (PSA) Pix2Pix, which we developed for this work, as a deep learning network. The targets for all approaches were the axial slices of images normalized using the direct normalization method. We performed Monte Carlo simulations of ten voxelized phantoms with the SimSET simulation tool and produced 26,000 pairs of axial image slices for training and testing. The results showed that 2.5-D PSA Pix2Pix trained with geometric-factors-corrected input images achieved the best performance among all the methods we tested. All approaches improved general image quality figures of merit peak signal to noise ratio (PSNR) and structural similarity index (SSIM) from ~15% to ~55%, and 2.5-D PSA Pix2Pix showed the highest PSNR (28.074) and SSIM (0.921). Lesion detectability, measured with region of interest (ROI) PSNR, SSIM, normalized contrast recovery coefficient (NCRC), and contrast-to-noise ratio (CNR), was generally improved for all approaches, and 2.5-D PSA Pix2Pix trained with geometric-factors-corrected input images achieved the highest ROI PSNR (28.920) and SSIM (0.973).
View details for DOI 10.1088/1361-6560/ad69fb
View details for PubMedID 39084640
-
Context-Aware Transformer GAN for Direct Generation of Attenuation and Scatter Corrected PET Data
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2024; 8 (6): 677-689
View details for DOI 10.1109/TRPMS.2024.3397318
View details for Web of Science ID 001263718700008
-
Deep generative denoising networks enhance quality and accuracy of gated cardiac PET data.
Annals of nuclear medicine
2024
Abstract
BACKGROUND: Cardiac positron emission tomography (PET) can visualize and quantify the molecular and physiological pathways of cardiac function. However, cardiac and respiratory motion can introduce blurring that reduces PET image quality and quantitative accuracy. Dual cardiac- and respiratory-gated PET reconstruction can mitigate motion artifacts but increases noise as only a subset of data are used for each time frame of the cardiac cycle.AIM: The objective of this study is to create a zero-shot image denoising framework using a conditional generative adversarial networks (cGANs) for improving image quality and quantitative accuracy in non-gated and dual-gated cardiac PET images.METHODS: Our study included retrospective list-mode data from 40 patients who underwent an 18F-fluorodeoxyglucose (18F-FDG) cardiac PET study. We initially trained and evaluated a 3D cGAN-known as Pix2Pix-on simulated non-gated low-count PET data paired with corresponding full-count target data, and then deployed the model on an unseen test set acquired on the same PET/CT system including both non-gated and dual-gated PET data.RESULTS: Quantitative analysis demonstrated that the 3D Pix2Pix network architecture achieved significantly (p value<0.05) enhanced image quality and accuracy in both non-gated and gated cardiac PET images. At 5%, 10%, and 15% preserved count statistics, the model increased peak signal-to-noise ratio (PSNR) by 33.7%, 21.2%, and 15.5%, structural similarity index (SSIM) by 7.1%, 3.3%, and 2.2%, and reduced mean absolute error (MAE) by 61.4%, 54.3%, and 49.7%, respectively. When tested on dual-gated PET data, the model consistently reduced noise, irrespective of cardiac/respiratory motion phases, while maintaining image resolution and accuracy. Significant improvements were observed across all gates, including a 34.7% increase in PSNR, a 7.8% improvement in SSIM, and a 60.3% reduction in MAE.CONCLUSION: The findings of this study indicate that dual-gated cardiac PET images, which often have post-reconstruction artifacts potentially affecting diagnostic performance, can be effectively improved using a generative pre-trained denoising network.
View details for DOI 10.1007/s12149-024-01945-1
View details for PubMedID 38842629
-
Toward "super-scintillation" with nanomaterials and nanophotonics.
Nanophotonics
2024; 13 (11): 1953-1962
Abstract
Following the discovery of X-rays, scintillators are commonly used as high-energy radiation sensors in diagnostic medical imaging, high-energy physics, astrophysics, environmental radiation monitoring, and security inspections. Conventional scintillators face intrinsic limitations including a low extraction efficiency of scintillated light and a low emission rate, leading to efficiencies that are less than 10 % for commercial scintillators. Overcoming these limitations will require new materials including scintillating nanomaterials ("nanoscintillators"), as well as new photonic approaches that increase the efficiency of the scintillation process, increase the emission rate of materials, and control the directivity of the scintillated light. In this perspective, we describe emerging nanoscintillating materials and three nanophotonic platforms: (i) plasmonic nanoresonators, (ii) photonic crystals, and (iii) high-Q metasurfaces that could enable high performance scintillators. We further discuss how a combination of nanoscintillators and photonic structures can yield a "super scintillator" enabling ultimate spatio-temporal resolution while enabling a significant boost in the extracted scintillation emission.
View details for DOI 10.1515/nanoph-2023-0946
View details for PubMedID 38745841
View details for PubMedCentralID PMC11090085
-
Toward "super-scintillation" with nanomaterials and nanophotonics
NANOPHOTONICS
2024
View details for DOI 10.1515/nanoph-2023-0946
View details for Web of Science ID 001201678800001
-
A Scalable Dynamic TOT Circuit for a 100 ps TOF-PET Detector Design to Improve Energy Linearity and Dynamic Range
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2024; 8 (3): 237-247
View details for DOI 10.1109/TRPMS.2023.3344399
View details for Web of Science ID 001180750200006
-
PET System Technology: Theoretical Aspects and Experimental Methodology.
Methods in molecular biology (Clifton, N.J.)
2024; 2729: 343-369
Abstract
Positron emission tomography (PET) imaging provides unique information of the cellular and molecular pathways of disease occurring within the human body, using measurements made from outside the body, which has shown utility in a variety of studies from basic research to clinical applications. This chapter describes some of the most relevant PET system parameters that impact its imaging performance such as 3D spatial, energy, and coincidence timing resolutions and the methodology typically used to evaluate those parameters. In addition, the physical principles underlying PET imaging, PET photon detector technology, and coincidence detection are also described. As a closing remark, the future perspectives of PET imaging and its simultaneous use with anatomical imaging techniques (e.g., computed tomography [CT] and magnetic resonance imaging [MRI]) are outlined.
View details for DOI 10.1007/978-1-0716-3499-8_20
View details for PubMedID 38006506
-
Compact FPGA-Based Data Acquisition System for a High-Channel, High-Count-Rate TOF-PET Insert for Brain PET/MRI
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
2024; 73
View details for DOI 10.1109/TIM.2023.3328091
View details for Web of Science ID 001132683400014
-
MRI compatibility study of a prototype radiofrequency penetrable oval PET insert at 3 T.
Japanese journal of radiology
2023
Abstract
To perform an MRI compatibility study of an RF field-penetrable oval-shaped PET insert that implements an MRI built-in body RF coil both as a transmitter and a receiver.Twelve electrically floating RF shielded PET detector modules were used to construct the prototype oval PET insert with a major axis of 440 mm, a minor axis of 350 mm, and an axial length of 225 mm. The electric floating of the PET detector modules was accomplished by isolating the cable shield from the detector shield using plastic tape. Studies were conducted on the transmit (B1) RF field, the image signal-to-noise ratio (SNR), and the RF pulse amplitude for a homogeneous cylindrical (diameter: 160 mm and length: 260 mm) phantom (NaCl + NiSO4 solution) in a 3 T clinical MRI system (Verio, Siemens, Erlangen, Germany).The B1 maps for the oval insert were similar to the MRI-only field responses. Compared to the MRI-only values, SNR reductions of 51%, 45%, and 59% were seen, respectively, for the spin echo (SE), gradient echo (GE), and echo planar (EPI) images for the case of oval PET insert. Moreover, the required RF pulse amplitudes for the SE, GE, and EPI sequences were, respectively, 1.93, 1.85, and 1.36 times larger. However, a 30% reduction in the average RF reception sensitivity was observed for the oval insert.The prototype floating PET insert was a safety concern for the clinical MRI system, and this compatibility study provided clearance for developing a large body size floating PET insert for the existing MRI system. Because of the RF shield of the insert, relatively large RF powers compared to the MRI-only case were required. Because of this and also due to low RF sensitivity of the body coil, the SNRs reduced largely.
View details for DOI 10.1007/s11604-023-01514-y
View details for PubMedID 38110835
View details for PubMedCentralID 4849712
-
A simulation of a high-resolution cadmium zinc telluride positron emission tomography system.
Medical physics
2023
Abstract
A CZT (cadmium zinc telluride) PET (positron emission tomography) system is being developed at Stanford University. CZT has the promise of outperforming scintillator-based systems in energy and spatial resolution but has relatively poor coincidence timing resolution.To supplement GATE (GEANT 4 Application for Emission Tomography) simulations with charge transport and electronics modeling for a high-resolution CZT PET system.A conventional GATE simulation was supplemented with electron-hole transport modeling and experimentally measured single detector energy resolution to improve the system-level understanding of a CZT high-resolution PET system in development at Stanford University. The modeling used GATE hits data and applied charge transport in the crystal and RC-CR processing of the simulated signals to model the electronics, including leading-edge discriminators and peak pick-off. Depth correction was also performed on the simulation data. Experimentally acquired data were used to determine energy resolution parameters and were compared to simulation data.The distributions of the coincidence timing, anode energy, and cathode energy are consistent with experimental data. Numerically, the simulation achieved 153 ns FWHM coincidence time resolution (CTR), which is of the same order of magnitude as the raw 210 ns CTR previously found experimentally. Further, the anode energy resolution was found to be 5.9% FWHM (full width at half maximum) at 511 keV in the simulation, which is between the experimental value found for a single crystal of 3% and the value found for the dual-panel setup of 8.02%, after depth correction.Developing this advanced simulation improves upon the limitations of GATE for modeling semiconductor PET systems and provides a means for deeper analysis of the coincidence timing resolution and other complementary electron-hole dependent system parameters.
View details for DOI 10.1002/mp.16856
View details for PubMedID 38100261
-
Simulation of ionization charge carrier cascade time and density for a new radiation detection method based on modulation of optical properties.
Medical physics
2023
Abstract
In time-of-flight PET, image quality and accuracy can be enhanced by improving the annihilation photon pair coincidence time resolution, which is the variation in the arrival time difference between the two annihilation photons emitted from each positron decay in the patient. Recent studies suggest direct detection of ionization tracks and their resulting modulation of optical properties, instead of scintillation, can improve the CTR significantly, potentially down to less than 10 ps CTR. However, the arrival times of the 511 keV photons are not predictable, leading to challenges in the spatiotemporal localization characterization of the induced charge carriers in the detector crystal.To establish an optimized experimental setup for measuring ionization induced modulation of optical properties, it is critical to develop a versatile simulation algorithm that can handle multiple detector material properties and time-resolved charge carrier dynamics.We expanded our previous algorithm and simulated ionization tracks, cascade time and induced charge carrier density over time in different materials. For designing a proof-of-concept experiment, we simulated ultrafast electrons and free-electron x-ray photons for timing characterization along with alpha and beta particles for higher spatial localization.With 3 MeV ultrafast electrons, by reducing detector crystal thickness, we can effectively reduce the ionization cascade time to 0.79 ps and deposited energy to 198.5 keV, which is on the order of the desired 511 keV energy. Alpha source simulations produced a cascade time of 2.45 ps and charge carrier density of 6.39 × 1020 cm-3 . Compared to the previous results obtained from 511 keV photon-induced ionization track simulations, the cascade time displayed similar characteristics, while the charge density was found to be higher. These findings suggest that alpha sources have the potential to generate a stronger ionization-induced signal using the modulation of optical properties as the detection mechanism.This work provides a guideline to understand, design and optimize an experimental platform that is highly sensitive and temporally precise enough to detect single 511 keV photon interactions with a goal to advance CTR for ToF-PET.
View details for DOI 10.1002/mp.16855
View details for PubMedID 38064645
-
Design and Characterization of the Detector Readout Electronics Used in PET<i>coil</i>: an RF-Penetrable TOF-PET Insert for PET/MRI
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2023; 7 (8): 819-829
View details for DOI 10.1109/TRPMS.2023.3309771
View details for Web of Science ID 001099904200005
-
Study on the radiofrequency transparency of partial-ring oval-shaped prototype PET inserts in a 3 T clinical MRI system.
Radiological physics and technology
2023
Abstract
The purpose of this study is to evaluate the RF field responses of partial-ring RF-shielded oval-shaped positron emission tomography (PET) inserts that are used in combination with an MRI body RF coil. Partial-ring PET insert is particularly suitable for interventional investigation (e.g., trimodal PET/MRI/ultrasound imaging) and intraoperative (e.g., robotic surgery) PET/MRI studies. In this study, we used electrically floating Faraday RF shield cages to construct different partial-ring configurations of oval and cylindrical PET inserts and performed experiments on the RF field, spin echo and gradient echo images for a homogeneous phantom in a 3 T clinical MRI system. For each geometry, partial-ring configurations were studied by removing an opposing pair or a single shield cage from different positions of the PET ring. Compared to the MRI-only case, reduction in mean RF homogeneity, flip angle, and SNR for the detector opening in the first and third quadrants was approximately 13%, 15%, and 43%, respectively, whereas the values were 8%, 23%, and 48%, respectively, for the detector openings in the second and fourth quadrants. The RF field distribution also varied for different partial-ring configurations. It can be concluded that the field penetration was high for the detector openings in the first and third quadrants of both the inserts.
View details for DOI 10.1007/s12194-023-00747-w
View details for PubMedID 37874462
View details for PubMedCentralID 4463332
-
Sparse SiPM Pixel Arrangement for a TOF-PET Detector Design that Achieves 100 ps Coincidence Time Resolution
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2023; 7 (7): 665-672
View details for DOI 10.1109/TRPMS.2023.3274606
View details for Web of Science ID 001060605700001
-
Investigation of Faraday cage materials with low eddy current and high RF shielding effectiveness for PET/MRI applications.
Physics in medicine and biology
2023
Abstract
This study aims to evaluate radiofrequency (RF) shielding effectiveness (SE), gradient-induced eddy current, MR susceptibility, and PET photon attenuation of six shielding materials: copper plate, copper tape, carbon fiber fabric, stainless steel mesh, phosphor bronze mesh, and a spray-on conductive coating. Approach. We evaluated the six shielding materials by implementing them on identical clear plastic enclosures. We measured the RF SE and eddy current in benchtop experiments (outside of the MR environment) and in a 3T MR scanner. The magnetic susceptibility performance was evaluated in the same MR scanner. Additionally, we measured their effects on PET detectors, including global coincidence time resolution, global energy resolution, and coincidence count rate. Main results. The RF SEs for copper plate, copper tape, carbon fiber fabric, stainless steel mesh, phosphor bronze mesh, and conductive coating enclosures were 56.8±5.8, 63.9±4.3, 33.1±11.7, 43.6±4.5, 52.7±4.6, and 47.8±7.1 dB, respectively, in the benchtop experiment. Copper plate and copper tape experienced the most eddy current at 10 kHz in the benchtop experiment and also generated the largest ghosting artifacts in the MR scanner. Stainless steel mesh had the highest mean absolute difference (7.6±0.2 Hz) compared to the reference in the MR susceptibility evaluation. The carbon fiber fabric and phosphor bronze mesh enclosures caused the largest photon attenuation, reducing the coincidence count rate by 3.3 %, while the rest caused less than 2.6 %. Significance. The conductive coating proposed in this study is shown to be a high-performance Faraday cage material for PET/MRI applications based on its overall performance in all the experiments conducted in this study, as well as its ease and flexibility of manufacturing. As a result, it will be selected as the Faraday cage material for our second-generation MR-compatible PET insert.
View details for DOI 10.1088/1361-6560/acdec4
View details for PubMedID 37321248
-
The PETcoil project: PET performance evaluation of two detector modules for a second generation RF-penetrable TOF-PET brain dedicated insert for simultaneous PET/MRI.
Physics in medicine and biology
2023
Abstract
OBJECTIVE: We are developing a portable, "RF-penetrable", brain-dedicated time of flight (TOF)-PET insert (PETcoil) for simultaneous PET/MRI.APPROACH: In this paper, we evaluate the PET performance of two fully assembled detector modules for this insert design outside the MR room.MAIN RESULTS: The global coincidence time resolution, global 511 keV energy resolution, coincidence count rate, and detector temperature achieved over 2-hour data collection were 242.2 ± 0.4 ps FWHM, 11.19 ± 0.02% FWHM, 22.0 ± 0.1 kcps, and 23.5 ± 0.3 °C, respectively. The intrinsic spatial resolutions in the axial and transaxial directions were 2.74 ± 0.01 mm FWHM and 2.88 ± 0.03 mm FWHM, respectively.SIGNIFICANCE: These results demonstrate excellent TOF capability and the performance and stability necessary for scaling up to a full ring comprising 16 detector modules.
View details for DOI 10.1088/1361-6560/acc3f2
View details for PubMedID 36913739
-
Study of compatibility between a 3T MR system and detector modules for a second generation RF-penetrable TOF-PET insert for simultaneous PET/MRI.
Medical physics
2023
Abstract
Simultaneous positron emission tomography/magnetic resonance imaging (PET/MRI) has shown promise in acquiring complementary multiparametric information of disease. However, designing these hybrid imaging systems is challenging due to the propensity for mutual interference between the PET and MRI sub-systems. Currently, there are integrated PET/MRI systems for clinical applications. For neurologic imaging, a brain-dedicated PET insert provides superior spatial resolution and sensitivity compared to body PET scanners.Our first-generation prototype brain PET insert ("PETcoil") demonstrated RF-penetrability and MR-compatibility. In the second-generation PETcoil system, all analog silicon photomultiplier (SiPM) signal digitization is moved inside the detectors, which results in substantially better PET detector performance, but presents a greater technical challenge for achieving MR-compatibility. In this paper, we report results from MR-compatibility studies of two fully assembled second-generation PET insert detector modules.We studied the effect of the presence of the two second-generation TOF-PET insert detectors on parameters that affect MR image quality and evaluated TOF-PET detector performance under different MRI pulse sequence conditions.With the presence of operating PET detectors, no RF noise peaks were induced in the MR images, but the relative average noise level was increased by 15%, which led to a 3.1 dB to 4.2 dB degradation in MR image signal-to-noise ratio (SNR). The relative homogeneity of MR images degraded by less than 1.5% with the two operating TOF-PET detectors present. The reported results also indicated that ghosting artifacts (percent signal ghosting (PSG) ⩽ 1%) and MR susceptibility artifacts (0.044 ppm) were insignificant. The PET detector data showed a relative change of less than 5% in detector module performance between running outside and within the MR bore under different MRI pulse sequences except for energy resolution in EPI sequence (13% relative difference).The PET detector operation did not cause any significant artifacts in MR images and the performance and TOF capability of the former were preserved under different tested MR conditions.
View details for DOI 10.1002/mp.16354
View details for PubMedID 36912373
-
Design considerations for PET detectors with 100 picoseconds coincidence time resolution
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
2023; 1045
View details for DOI 10.1016/j.nima.2022.167579
View details for Web of Science ID 000922745300002
-
Predicting final ischemic stroke lesions from initial diffusion-weighted images using a deep neural network.
NeuroImage. Clinical
2022; 37: 103278
Abstract
For prognosis of stroke, measurement of the diffusion-perfusion mismatch is a common practice for estimating tissue at risk of infarction in the absence of timely reperfusion. However, perfusion-weighted imaging (PWI) adds time and expense to the acute stroke imaging workup. We explored whether a deep convolutional neural network (DCNN) model trained with diffusion-weighted imaging obtained at admission could predict final infarct volume and location in acute stroke patients.In 445 patients, we trained and validated an attention-gated (AG) DCNN to predict final infarcts as delineated on follow-up studies obtained 3 to 7 days after stroke. The input channels consisted of MR diffusion-weighted imaging (DWI), apparent diffusion coefficients (ADC) maps, and thresholded ADC maps with values less than 620 × 10-6 mm2/s, while the output was a voxel-by-voxel probability map of tissue infarction. We evaluated performance of the model using the area under the receiver-operator characteristic curve (AUC), the Dice similarity coefficient (DSC), absolute lesion volume error, and the concordance correlation coefficient (ρc) of the predicted and true infarct volumes.The model obtained a median AUC of 0.91 (IQR: 0.84-0.96). After thresholding at an infarction probability of 0.5, the median sensitivity and specificity were 0.60 (IQR: 0.16-0.84) and 0.97 (IQR: 0.93-0.99), respectively, while the median DSC and absolute volume error were 0.50 (IQR: 0.17-0.66) and 27 ml (IQR: 7-60 ml), respectively. The model's predicted lesion volumes showed high correlation with ground truth volumes (ρc = 0.73, p < 0.01).An AG-DCNN using diffusion information alone upon admission was able to predict infarct volumes at 3-7 days after stroke onset with comparable accuracy to models that consider both DWI and PWI. This may enable treatment decisions to be made with shorter stroke imaging protocols.
View details for DOI 10.1016/j.nicl.2022.103278
View details for PubMedID 36481696
-
Promising Detector Concepts to Advance Coincidence Time Resolution for Time-of-Flight Positron Emission Tomography
POLISH ACAD SCIENCES INST PHYSICS. 2022: 422-427
View details for DOI 10.12693/APhysPolA.142.422
View details for Web of Science ID 000926213600022
-
Study of Annihilation Photon Pair Coincidence Time Resolution Using Prompt Photon Emissions in New Perovskite Bulk Crystals.
IEEE transactions on radiation and plasma medical sciences
2022; 6 (7): 804-810
Abstract
Semiconductor-based radiation detectors can typically achieve better energy and spatial resolution when compared to scintillator-based detectors. However, if used for positron emission tomography (PET), semiconductor-based detectors normally cannot achieve excellent coincidence time resolution (CTR), due to the relatively slow charge carrier collection time limited by the carrier drift velocity. If we can collect prompt photons emitted from certain semiconductor materials, there are possibilities that the CTR can be greatly improved, and time-of-flight (ToF) capability can be achieved. In this paper, we studied the prompt photon emission (mainly Cherenkov luminescence) property and fast timing capability of cesium lead chloride (CsPbCl3) and cesium lead bromide (CsPbBr3), which are two new perovskite semiconductor materials. We also compared their performance with thallium bromide (TlBr), another semiconductor material that has already been studied for timing using its Cherenkov emissions. We performed coincidence measurements using silicon photomultipliers (SiPMs), and the full-width-at-half-maximum (FWHM) CTR acquired between a semiconductor sample crystal and a reference lutetium-yttrium oxyorthosilicate (LYSO) crystal (both with dimensions of 3 × 3 × 3 mm3) is 248 ± 8 ps for CsPbCl3, 440 ± 31 ps for CsPbBr3, and 343 ± 16 ps for TlBr. Deconvolving the contribution to CTR from the reference LYSO crystal (around 100 ps) and then multiplying by the square root of 2, the estimated CTR between two of the same semiconductor crystals was calculated as 324 ± 10 ps for CsPbCl3, 606 ± 43 ps for CsPbBr3 and 464 ± 22 ps for TlBr. This ToF capable CTR performance combined with an easily scalable crystal growth process, low cost and toxicity, as well as good energy resolution lead us to the conclusion that new perovskite materials such as CsPbCl3 and CsPbBr3 could be excellent candidates as PET detector materials.
View details for DOI 10.1109/trpms.2022.3149992
View details for PubMedID 37008042
View details for PubMedCentralID PMC10065467
-
Study of Annihilation Photon Pair Coincidence Time Resolution Using Prompt Photon Emissions in New Perovskite Bulk Crystals
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2022; 6 (7): 804-810
View details for DOI 10.1109/TRPMS.2022.3149992
View details for Web of Science ID 000849260800012
-
Advances in Detector Instrumentation for PET.
Journal of nuclear medicine : official publication, Society of Nuclear Medicine
2022; 63 (8): 1138-1144
Abstract
During the last 3 decades, PET has become a standard-of-care imaging technique used in the management of cancer and in the characterization of neurologic disorders and cardiovascular disease. It has also emerged as a prominent molecular imaging method to study the basic biologic pathways of disease in rodent models. This review describes the basics of PET detectors, including a detailed description of indirect and direct 511-keV photon detection methods. We will also cover key detector performance parameters and describe detector instrumentation advances during the last decade.
View details for DOI 10.2967/jnumed.121.262509
View details for PubMedID 35914819
-
Investigation of Electronic Signal Processing Chains for a Prototype TOF-PET System With 100-ps Coincidence Time Resolution.
IEEE transactions on radiation and plasma medical sciences
2022; 6 (6): 690-696
Abstract
We have evaluated CTR performance of four different mixed-signal front-end electronic readout configurations with the goal to achieve 100 picoseconds (ps) coincidence time resolution (CTR). The proposed TOF-PET detector elements are based on two 3 × 3 × 10 mm3 "fast LGSO" crystal segments, side-coupled to linear arrays of 3 × 3 mm2 silicon photomultipliers (SiPMs), to form a total crystal length of 20 mm. We studied multiple configurations and components for the front-end readout: 1) high speed radio frequency (RF) amplifiers; 2) an ASIC-based discriminator; 3) combination of RF amplifier, balun transformer, and discriminator ASIC; and 4) combination of balun transformer, and discriminator ASIC. Using two 3 × 3 × 10 mm3 fast LGSO crystals side coupled to a linear array of three SiPMs, coincidence data were experimentally acquired for each readout configuration in combination with a low jitter field programmable gate array (FPGA)-based time to digital converter (TDC). After evaluating timing performance of the three readout schemes, the best CTR value of 99.4 ± 1.9 ps FWHM was achieved for configuration (3), which is more than 20 ps better than the results achieved using configurations (1) and (2).
View details for DOI 10.1109/trpms.2021.3124756
View details for PubMedID 36060422
View details for PubMedCentralID PMC9432859
-
Cherenkov Radiation-Based Coincidence Time Resolution Measurements in BGO Scintillators
FRONTIERS IN PHYSICS
2022; 10
View details for DOI 10.3389/fphy.2022.816384
View details for Web of Science ID 000753343000001
-
Application of Artificial Intelligence in PET Instrumentation.
PET clinics
2022; 17 (1): 175-182
Abstract
Artificial intelligence (AI) has been widely used throughout medical imaging, including PET, for data correction, image reconstruction, and image processing tasks. However, there are number of opportunities for the application of AI in photon detector performance or the data collection process, such as to improve detector spatial resolution, time-of-flight information, or other PET system performance characteristics. This review outlines current topics, research highlights, and future directions of AI in PET instrumentation.
View details for DOI 10.1016/j.cpet.2021.09.011
View details for PubMedID 34809865
-
Investigation of Electronic Signal Processing Chains for a Prototype TOF-PET System with 100 ps Coincidence Time Resolution
IEEE Transactions on Radiation and Plasma Medical Sciences
2022; 6 (6): 690 - 696
View details for DOI 10.1109/TRPMS.2021.3124756
-
Study of optical reflectors for a 100ps coincidence time resolution TOF-PET detector design.
Biomedical physics & engineering express
2021
Abstract
Positron Emission Tomography (PET) reconstructed image signal-to-noise ratio (SNR) can be improved by including the 511 keV photon pair coincidence time-of-flight (TOF) information. The degree of SNR improvement from this TOF capability depends on the coincidence time resolution (CTR) of the PET system, which is essentially the variation in photon arrival time differences over all coincident photon pairs detected for a point positron source placed at the system center. The CTR is determined by several factors including the intrinsic properties of the scintillation crystals and photodetectors, crystal-to-photodetector coupling configurations, reflective materials, and the electronic readout configuration scheme. The goal of the present work is to build a novel TOF-PET system with 100 picoseconds (ps) CTR, which provides an additional factor of 1.5-2.0 improvement in reconstructed image SNR compared to state-of-the-art TOF-PET systems which achieve 225 - 400 ps CTR. A critical parameter to understand is the optical reflector's influence on scintillation light collection and transit time variations to the photodetector. To study the effects of the reflector covering the scintillation crystal element on CTR, we have tested the performance of four different reflector materials: Enhanced Specular Reflector (ESR) -coupled with air or optical grease to the scintillator; Teflon tape; BaSO4 paint alone or mixed with epoxy; and TiO2 paint. For the experimental set-up, we made use of 3*3*10 mm3 fast-LGSO:Ce scintillation crystal elements coupled to an array of silicon photomultipliers (SiPMs) using a novel "side-readout" configuration that has proven to have lower variations in scintillation light collection efficiency and transit time to the photodetector. Results show CTR values of 102.0±0.8, 100.2±1.2, 97.3±1.8 and 95.0±1.0 ps full-width-half-maximum (FWHM) with non-calibrated energy resolutions of 10.2±1.8, 9.9±1.2, 7.9±1.2, and 8.6±1.7 % FWHM for the Teflon, ESR (without grease), BaSO4 (without epoxy) and TiO2 paint treatments, respectively.
View details for DOI 10.1088/2057-1976/ac240e
View details for PubMedID 34488203
-
Reduced Acquisition Time Per Bed Position for PET/MRI Using 68Ga-RM2 or 68Ga-PSMA11 in Patients With Prostate Cancer: A Retrospective Analysis.
AJR. American journal of roentgenology
2021
Abstract
Background: Growing clinical adoption of PET/MRI for prostate cancer (PC) evaluation has increased interest in reducing PET/MRI scan times. Reducing acquisition time per bed position below current times of at least 5 minutes would allow shorter examination lengths. Objective: To evaluate the effect of different reduced PET acquisition times in patients with PC who underwent 68Ga-PSMA11 or 68Ga-RM2 PET/MRI using highly sensitive silicon photomultiplier-based PET detectors. Methods: This study involved retrospective review of men with PC who underwent PET/MRI as part of one of two prospective trials. Fifty men (mean age, 69.9±6.8 years) who underwent 68Ga-RM2 PET/MRI and 50 men (66.6±5.7 years) who underwent 68Ga-PSMA11 PET/MRI were included. PET/MRI used a time-of-flight-enabled system with silicon photomultiplier-based detectors. Acquisition time was 4 minutes per bed position. PET data were reconstructed using acquisition times of 30 seconds, 1 minute, 2 minutes, 3 minutes, and 4 minutes. Three readers independently assessed image quality for each reconstruction using 1-5 scale (1=non-diagnostic; 5=excellent quality). One reader measured SUVmax for up to 6 lesions per patient. Two readers independently assessed lesion conspicuity using 1-3 scale (1=not visualized; 3=definitely visualized). Results: Mean image quality across readers at 30 seconds, 1 minutes, 2 minutes, 3 minutes, and 4 minutes was, for 68Ga-RM2 PET/MRI, 1.0±0.2 to 1.7±0.7, 2.0±0.3 to 2.6±0.8, 3.1±0.5 to 3.9±0.8, 4.6±0.6 to 4.7±0.6, and 4.8±0.4 to 4.8±0.5, respectively, and for 68Ga-PSMA11 PET/MRI was 1.2±0.4 to 1.8±0.6, 2.2±0.4 to 2.8±0.7, 3.6±0.6 to 4.1±0.8, 4.8±0.4 to 4.9±0.4, and 4.9±0.3 to 5.0±0.2, respectively. Mean lesion SUVmax for 68Ga-RM2 PET/MRI was 11.1±12.4, 10.2±11.7, 9.6±11.3, 9.5±11.6, and 9.4±11.6, respectively, and for 68Ga-PSMA11 PET/MRI was 14.7±8.2, 12.9±7.4, 12.1±7.8, 11.7±7.9, and 11.6±7.9, respectively. Mean lesion conspicuity (reader 1/reader 2) was, for 68Ga-RM2 PET/MRI, 2.4±0.5/2.7±0.5, 2.9±0.3/2.9±0.3, 3.0±0.0/3.0±0.0, 3.0±0.0/3.0±0.0, and 3.0±0.0/3.0±0.0, respectively, and for 68Ga-PSMA11 PET/MRI was 2.6±0.5/2.8±0.4, 3.0±0.2/2.9±0.3, 3.0±0.1/3.0±0.2, 3.0±0.0/3.0±0.0, and 3.0±0.0/3.0±0.0, respectively. Conclusion: Our data support routine 3 minute acquisitions, which provided very similar results as 4 minute acquisitions. Two minute acquisition, though somewhat lowering quality, provided acceptable performance and warrants consideration. Clinical Impact: When evaluating PC using modern PET/MRI equipment, time per bed position may be reduced compared with historically used times.
View details for DOI 10.2214/AJR.21.25961
View details for PubMedID 34406051
-
High-resolution time-of-flight PET detector with 100 ps coincidence time resolution using a side-coupled phoswich configuration.
Physics in medicine and biology
2021; 66 (12)
Abstract
Photon time-of-flight (TOF) capability in positron emission tomography (PET) enables reconstructed image signal-to-noise ratio (SNR) improvement. With the coincidence time resolution (CTR) of 100 picosecond (ps), a five-fold SNR improvement can be achieved with a 40 cm diameter imaging subject, relative to a system without TOF capability. This 100 ps CTR can be achieved for aclinically relevantdetector design (crystal element length ≥20 mm with reasonably high crystal packing fraction) using a side-readout PET detector configuration that enables 511 keV photon interaction depth-independent light collection efficiency and lower variance in scintillation photon transit time to the silicon photomultiplier (SiPM). In this study, we propose a new concept of TOF-PET detector to achieve high (<2 mm) resolution, using a 'side-coupled phoswich' configuration, where two crystals with different decay times (taud) are coupled in a side-readout configuration to a common row of photosensors. The proposed design was validated and optimized with GATE Monte Carlo simulation studies to determine an efficient detector design. Based on the simulation results, a proof-of-concept side-coupled phoswich detector design was developed comprising two LSO crystals with the size of 1.9*1.9*10 mm3with decay times of 34.39 and 43.07 ns, respectively. The phoswich crystals were side-coupled to the same three 4*4 mm2SiPMs and detector performances were evaluated. As a result of the experimental evaluation, the side-coupled phoswich configuration achieved CTR of 107±3 ps, energy resolution of 10.5%±1.21% at 511 keV and >95% accuracy in identifying interactions in the two adjacent 1.9*1.9*10 mm3crystal elements using the time-over-threshold technique. Based on our results, we can achieve excellent spatial and energy resolution in addition to 100 ps CTR with this novel detector design.
View details for DOI 10.1088/1361-6560/ac01b5
View details for PubMedID 34106089
-
New PET technologies - embracing progress and pushing the limits.
European journal of nuclear medicine and molecular imaging
2021
View details for DOI 10.1007/s00259-021-05390-4
View details for PubMedID 34081153
-
Results of a Prospective Trial to Compare 68Ga-DOTA-TATE with SiPM-Based PET/CT vs. Conventional PET/CT in Patients with Neuroendocrine Tumors.
Diagnostics (Basel, Switzerland)
2021; 11 (6)
Abstract
We prospectively enrolled patients with neuroendocrine tumors (NETs). They underwent a single 68Ga-DOTA-TATE injection followed by dual imaging and were randomly scanned using first either the conventional or the silicon photomultiplier (SiPM) positron emission tomography/computed tomography (PET/CT), followed by imaging using the other system. A total of 94 patients, 44 men and 50 women, between 35 and 91 years old (mean ± SD: 63 ± 11.2), were enrolled. Fifty-two out of ninety-four participants underwent SiPM PET/CT first and a total of 162 lesions were detected using both scanners. Forty-two out of ninety-four participants underwent conventional PET/CT first and a total of 108 lesions were detected using both scanners. Regardless of whether SiPM-based PET/CT was used first or second, maximum standardized uptake value (SUVmax) of lesions measured on SiPM was on average 20% higher when comparing two scanners with all enrolled patients, and the difference was statistically significant. SiPM-based PET/CT detected 19 more lesions in 13 patients compared with conventional PET/CT. No lesions were only identified by conventional PET/CT. In conclusion, we observed higher SUVmax for lesions measured from SiPM PET/CT compared with conventional PET/CT regardless of the order of the scans. SiPM PET/CT allowed for identification of more lesions than conventional PET/CT. While delayed imaging can lead to higher SUVmax in cancer lesions, in the series of lesions identified when SiPM PET/CT was used first, this was not the case; therefore, the data suggest superior performance of the SiPM PET/CT scanner in visualizing and quantifying lesions.
View details for DOI 10.3390/diagnostics11060992
View details for PubMedID 34070751
-
Evolution of PET Detectors and Event Positioning Algorithms Using Monolithic Scintillation Crystals
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2021; 5 (3): 282-305
View details for DOI 10.1109/TRPMS.2021.3059181
View details for Web of Science ID 000645861500001
-
Pseudo CT Image Synthesis and Bone Segmentation From MR Images Using Adversarial Networks With Residual Blocks for MR-Based Attenuation Correction of Brain PET Data
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2021; 5 (2): 193–201
View details for DOI 10.1109/TRPMS.2020.2989073
View details for Web of Science ID 000626319500004
-
Further investigations of a radiation detector based on ionization-induced modulation of optical polarization.
Physics in medicine and biology
2021
Abstract
Optical property modulation induced by ionizing radiation is a promising approach for ultra-fast, lower time jitter detection of photon arrival time. If successful, this method can be utilized in time-of-flight (TOF) positron emission tomography (PET) to achieve a coincidence time resolution (CTR) approaching 10 ps. In this work, the optical property modulation based method is further developed with focus on a detection setup based on two crossed polarizers. Previous work demonstrated that such an optical setup could be utilized in radiation detection, though its detection sensitivity needed improvement. This work investigates the angle between polarizers and electric eld distribution within the detection crystal to understand and improve the detection sensitivity of an optical polarization modulation based method. For this work, Cadmium Telluride (CdTe) was studied as the detector crystal. The "magic" angle (i.e. optimal working angle) of the two crossed polarizers based optical setup with CdTe was explored theoretically and experimentally. The experimental results show that the detection sensitivity could be improved by around 10% by determining the appropriate "magic" angle. We then studied the dependence of detection sensitivity on electric eld distribution as well as on the bias voltage across the detector crystal using CdTe crystals. The experimental results show that a smaller electrode on the detector crystal, or a more concentrated electric eld distribution could improve detection sensitivity. For CdTe, a detector crystal sample with 2.5 mm*2.5 mm square electrode has twice the detection sensitivity of a detector crystal with 5 mm*5 mm square electrode. Increasing the bias voltage before saturation for CdTe could further enhance the modulation strength and thus, the sensitivity. Our investigations demonstrated that by determining the proper working angle of polarizers and bias electrical distribution to the detector, we could improve the sensitivity of the proposed optical setup.
View details for DOI 10.1088/1361-6560/abe027
View details for PubMedID 33498027
-
Noninvasive and Highly Multiplexed Five-Color Tumor Imaging of Multicore Near-Infrared Resonant Surface-Enhanced Raman Nanoparticles In Vivo.
ACS nano
2021
Abstract
In vivo multiplexed imaging aims for noninvasive monitoring of tumors with multiple channels without excision of the tissue. While most of the preclinical imaging has provided a number of multiplexing channels up to three, Raman imaging with surface-enhanced Raman scattering (SERS) nanoparticles was suggested to offer higher multiplexing capability originating from their narrow spectral width. However, in vivo multiplexed SERS imaging is still in its infancy for multichannel visualization of tumors, which require both sufficient multiplicity and high sensitivity concurrently. Here we create multispectral palettes of gold multicore-near-infrared (NIR) resonant Raman dyes-silica shell SERS (NIR-SERRS) nanoparticle oligomers and demonstrate noninvasive and five-plex SERS imaging of the nanoparticle accumulation in tumors of living mice. We perform the five-plex ratiometric imaging of tumors by varying the administered ratio of the nanoparticles, which simulates the detection of multiple biomarkers with different expression levels in the tumor environment. Furthermore, since this method does not require the excision of tumor tissues at the imaging condition, we perform noninvasive and longitudinal imaging of the five-color nanoparticles in the tumors, which is not feasible with current ex vivo multiplexed tissue analysis platforms. Our work surpasses the multiplicity limit of previous preclinical tumor imaging methods while keeping enough sensitivity for tumor-targeted in vivo imaging and could enable the noninvasive assessment of multiple biological targets within the tumor microenvironment in living subjects.
View details for DOI 10.1021/acsnano.1c07470
View details for PubMedID 34797988
-
Scalable electronic readout design for a 100 ps coincidence time resolution TOF-PET system.
Physics in medicine and biology
2021
Abstract
We have developed a scalable detector readout design for a 100 ps coincidence time resolution (CTR) time of flight (TOF) positron emission tomography (PET) detector technology. The basic scintillation detectors studied in this paper are based on 2×4 arrays of 3×3×10 mm³ "fast- LGSO:Ce" scintillation crystals side- coupled to 6×4 arrays of 3×3 mm² silicon photomultipliers (SiPMs). We employed a novel mixed-signal front-end electronic configuration and a low timing jitter Field Programming Gate Array (FPGA)-based time to digital converter (TDC) for data acquisition. Using a 22 Na point source, >10,000 coincidence events were experimentally acquired for several SiPM bias voltages, leading edge time-pickoff thresholds, and timing channels. CTR of 102.03 ± 1.9 ps full-width-at-half-maximum (FWHM) was achieved using single 3×3×10 mm³ "fast- LGSO" crystal elements, wrapped in Teflon tape and side coupled to a linear array of 3 SiPMs. In addition, the measured average CTR was 113.4 ± 0.7 ps for the side- coupled 2×4 crystal array. The readout architecture presented in this work is designed to be scalable to large area module detectors with a goal to create the first TOF-PET system with 100 ps FWHM CTR.
View details for DOI 10.1088/1361-6560/abf1bc
View details for PubMedID 33761476
-
Ionizing photon interactions modulate the optical properties of crystals with femtosecond scale temporal resolution.
Physics in medicine and biology
2021
Abstract
In this work, we continue our study of a new method for the detection of ionizing radiation with the potential for a dramatic improvement in coincidence time resolution (CTR) for time-of-flight positron emission tomography (ToF-PET) using the modulation of a material's optical properties instead of the scintillation mechanism. Our previous work has shown that for non-scintillation materials such as bismuth silicon oxide (BSO) and cadmium telluride (CdTe), their refractive index can be modulated by annihilation photon interactions. The ultrafast nature of this process however remains unexplored. The ionizing radiation-induced charge carriers alter the local band structure in these materials, thus changing the complex refractive index. This mechanism is routinely used at the Linac Coherent Light Source (LCLS) facility of the SLAC National Accelerator Laboratory to measure X-ray pulse arrival times with femtosecond scale resolution for photon energies between 0.5 -- 10 keV. The method described here follows that example by using a frequency chirped visible continuum pulse to provide a monotonic wavelength-to-time mapping by which one can measure the time-dependent refractive index modulation. In addition, we describe an interference-based measurement setup that allows for significantly improved sensitivity while preserving a timing precision of approximately 10 fs (σ) when measuring the arrival time of below 10 keV X-ray pulses with yttrium aluminum garnet (YAG) crystal. The method is presented in the context of ToF-PET application with further discussions on the potential CTR achievable if a similar detection concept is adopted for detecting 511 keV photons. Semi-empirical analysis indicates that the predicted CTR achievable is on the order of 1 ps (FWHM).
View details for DOI 10.1088/1361-6560/abd951
View details for PubMedID 33412537
-
Simulation studies to understand sensitivity and timing characteristics of an optical property modulation-based radiation detection concept for PET.
Physics in medicine and biology
2020
Abstract
The concept of using the modulation mechanisms of a material's optical properties for annihilation photon detection has been proposed as a potential method to significantly improve the coincidence time resolution (CTR) of positron emission tomography (PET) detectors. However, the possibility of detecting individual 511 keV photons with largely improved CTR using the proposed detection method has not yet been demonstrated, either experimentally or theoretically. In addition, the underlying physical picture of the optical modulation effects induced by annihilation photons has not been fully understood. In this work, we perform simulation studies including generation of the annihilation photon-induced ionization energy deposition trajectory, estimation of the charge carrier cascade time and temporal variance, simulation of the distribution of ionization-induced charge carrier density, and calculation of the strength of the modulation of two optical parameters: the absorption coefficient and the refractive index, as well as evaluation of the resulting optical intensity and phase change experienced by a probe laser beam. Our simulation results show that the average absorption coefficient modulation induced by individual 511 keV photon interactions is around 0.04/cm, and the average refractive index change is 3.6 * 10-5, leading to modulations in the probe laser intensity of around 0.1% and phase modulation of around 0.05 radians. We have also found that the ionization process induced by a single 511 keV photon interaction occurs within 2.3 ps with a temporal variance of 0.4 ps. The fundamental limit on CTR using the optical property modulation-based detection mechanism is estimated to be around 1.2 ps full width at half maximum (FWHM). Our simulation results indicate that with proper experiment design, it is possible to detect the ionization produced by an individual 511 keV photon with significantly improved CTR using the optical property modulation-based detection concept.
View details for DOI 10.1088/1361-6560/aba938
View details for PubMedID 32707569
-
Motion Correction for Simultaneous PET/MR Brain Imaging Using a Radiofrequency-Penetrable PET Insert.
SOC NUCLEAR MEDICINE INC. 2020
View details for Web of Science ID 000568290500327
-
Deep learning based methods for gamma ray interaction location estimation in monolithic scintillation crystal detectors.
Physics in medicine and biology
2020
Abstract
In this work, we explore deep learning based techniques using the information from mean detector response functions as a new method to estimate gamma ray interaction location in monolithic scintillation crystal detectors. Compared with searching based methods, deep learning techniques do not require recording all the MDRF information once the prediction networks are trained, which means the memory cost could be significantly reduced. In addition, the event positioning process using deep learning techniques only requires running through the network once, without the need to do searching in the reference dataset. This could greatly speed up the positioning process for each event. We have designed and trained four different neural networks to estimate the gamma ray interaction location given the MDRF data. We have studied network structures consisting only of fully connected (FC) layers, as well as convolutional neural networks (CNNs). In addition, we tried to use both regression and classification to generate the final prediction of the gamma ray interaction position. We evaluated the estimation accuracy, testing speed and memory cost (numbers of parameters) of different network architectures, and also compared them with the exhaustive search method. Our results indicate that deep learning based estimation methods with a well designed network structure can achieve a relative positioning error with respect to the ground truth determined by the exhaustive search method of below 1mm in both x and y directions (depth information is not considered in this work), which would imply a very high performance positioning algorithm for practical monolithic scintillation crystal detectors. The deep learning network also achieves a testing speed that is more than 400 times faster than the exhaustive search method. With proper design of the network structure, the deep learning based positioning methods have the potential to save memory cost by a factor of up to 100.
View details for DOI 10.1088/1361-6560/ab857a
View details for PubMedID 32235062
-
Robust Detector Calibration for a Novel PET System Based on Cross-Strip CZT Detectors
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2019; 3 (6): 626–33
View details for DOI 10.1109/TRPMS.2018.2878574
View details for Web of Science ID 000494804000003
-
Fast gamma-ray interaction-position estimation using k-d tree search
PHYSICS IN MEDICINE AND BIOLOGY
2019; 64 (15)
View details for DOI 10.1088/1361-6560/ab0da6
View details for Web of Science ID 000480292700013
-
Electronics method to advance the coincidence time resolution with bismuth germanate.
Physics in medicine and biology
2019
Abstract
Exploiting the moderate Cherenkov yield from 511 keV photoelectric interactions in bismuth germanate (BGO) scintillators enables one to achieve a level of coincidence time resolution (CTR) appropriate for time-of-flight positron emission tomography (TOF-PET). For this approach, owing to the low number of promptly emitted light photons, single photon time resolution (SPTR) can have a stronger influence on achievable CTR. We have previously shown readout techniques that reduce effective device capacitance of large area silicon photomultipliers (SiPMs) can yield improvements in single photon response shape that minimize the influence of electronic noise on SPTR. With these techniques, sub-100 ps FWHM SPTR can be achieved with 4x4 mm<sup>2</sup> FBK near-ultra-violet high density (NUV-HD) SiPMs. These sensors are also useful for detecting Cherenkov light due to relatively high photon detection efficiency for UV light. In this work, we measured CTR for BGO crystals coupled to FBK NUV-HD SiPMs with a passive bootstrapping readout circuit that effectively reduces the SiPM device capacitance. A range of CTR values between 200±3 and 277±7 ps FWHM were measured for 3x3x3 and 3x3x15 mm<sup>3</sup> crystals, respectively. This readout technique provides a relatively simple approach to achieve state-of-the-art CTR performance using BGO crystals for TOF-PET.
View details for DOI 10.1088/1361-6560/ab31e3
View details for PubMedID 31300623
-
Time Resolution Studies for a 1-mm Resolution Clinical PET System With a Charge Sharing Readout and Leading Edge Discrimination
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2019; 3 (3): 285–91
View details for DOI 10.1109/TRPMS.2018.2885704
View details for Web of Science ID 000467062000005
-
Intercrystal scatter studies for a 1 mm(3) resolution clinical PET system prototype
PHYSICS IN MEDICINE AND BIOLOGY
2019; 64 (9)
View details for DOI 10.1088/1361-6560/ab115b
View details for Web of Science ID 000466862700003
-
Intercrystal scatter studies for a 1 mm<sup>3</sup> resolution clinical PET system prototype.
Physics in medicine and biology
2019
Abstract
Positron emission tomography (PET) systems designed with multiplexed readout do not usually have the capability to resolve individual intercrystal scatter (ICS) interactions, leading to interaction mispositioning that degrades spatial resolution and contrast. A 3D position sensitive scintillation detector capable of individual ICS readout has been designed and incorporated into a 1 mm<sup>3</sup> resolution clinical PET system used for locoregional imaging. Incorporating ICS events increases photon sensitivity by 51.5% compared to using only photoelectric events. A Compton scatter angle error minimization algorithm is used to estimate the first ICS interaction location for accurate line-of-response pairing of coincident photons. An optimal scatter angle error threshold of 15 degrees is used to discard ICS events with a high mismatch between energy-derived and position-derived intercrystal scatter angles. Finally, positioning rather than rejecting ICS events boosts peak contrast to noise ratio by 8.1%, and allows for an equivalent dose reduction of 12% while maintaining equivalent image quality.
View details for PubMedID 30893659
-
Fast gamma-ray interaction-position estimation using k-d tree search.
Physics in medicine and biology
2019
Abstract
We have developed a fast gamma-ray interaction-position estimation method using k-d tree search, which can be combined with various kinds of closeness metrics such as Euclidean distance, maximum-likelihood estimation, etc.. Compared with traditional search strategies, this method can achieve both speed and accuracy at the same time using the k-d tree data structure. The k-d tree search method has a time complexity of O(log2(N)), where N is the number of entries in the reference data set, which means large reference datasets can be used to efficiently estimate each event's interaction position. This method's accuracy was found to be equal to that of the exhaustive search method, yielding the highest achievable accuracy. Most importantly, this method has no restriction on the data structure of the reference dataset and can still work with complicated mean-detector-response functions (MDRFs), meaning that it is more robust than other popular methods such as contracting-grid search (CG) or vector-search (VS) methods that could yield locally optimal result instead of globally optimal result.
View details for PubMedID 30844778
-
Performance evaluation of RF coils integrated with an RF-penetrable PET insert for simultaneous PET/MRI
MAGNETIC RESONANCE IN MEDICINE
2019; 81 (2): 1434–46
View details for DOI 10.1002/mrm.27444
View details for Web of Science ID 000462086300057
-
Pulse Shape Discrimination and Energy Measurement in Phoswich Detectors Using Gated-Integrator Circuit
IEEE. 2019
View details for Web of Science ID 000569982800216
-
Time-resolved Simulation of Optical Modulation from Ionization-induced Fast Charge Carriers
IEEE. 2019
View details for Web of Science ID 000569982800319
-
Investigation of optical property modulation based ionizing radiation detection method for PET: two-crossed-polarizers based method
IEEE. 2019
View details for Web of Science ID 000569982800172
-
Study of the Coincidence Time Resolution of New Perovskite Bulk Crystals
IEEE. 2019
View details for Web of Science ID 000569982800108
-
Search for Ionization-Induced Modulation of Light Polarization for a New Direction to Improve Time Resolution of PET
IEEE. 2019
View details for Web of Science ID 000569982800455
-
High-resolution PET detector with 100 ps coincidence time resolution using side-by-side phoswich design
IEEE. 2019
View details for Web of Science ID 000569982800257
-
Characterization of TOF-PET detectors for a second generation radiofrequency-penetrable PET insert for simultaneous PET/MRI
IEEE. 2019
View details for Web of Science ID 000569982800105
-
Simultaneous Dual Isotope ToF-PET Imaging
IEEE. 2019
View details for Web of Science ID 000569982800206
-
Analysis of Data Corrections for the First-Generation Radiofrequency-Penetrable PET Insert for Simultaneous PET/MR
IEEE. 2019
View details for Web of Science ID 000569982800017
-
Motion Correction for Simultaneous PET/MR Brain Imaging Using a RF-Penetrable PET Insert
IEEE. 2019
View details for Web of Science ID 000569982800245
-
Approaches to improving the detection sensitivity of optical modulation based radiation detection method for positron emission tomography
IEEE. 2019
View details for Web of Science ID 000569982800375
-
Characterization of a Large Volume Cadmium Zinc Telluride Preclinical PET System
IEEE. 2019
View details for Web of Science ID 000569982800014
-
Study of Lutetium-based scintillators for PET system design with 100-ps coincidence time resolution
IEEE. 2019
View details for Web of Science ID 000569982800364
-
Bias Voltage Calibrations for a 1-millimeter Resolution Clinical PET System
IEEE. 2019
View details for Web of Science ID 000569982800394
-
Geometry optimization of electrically floating PET inserts for improved RF penetration for a 3T MRI system
MEDICAL PHYSICS
2018; 45 (10): 4627–41
Abstract
An electrically floating radio frequency (RF) shielded PET insert with individual PET detectors shielded by separate Faraday cages enables the MRI built-in body RF coil to be used at least as an RF transmitter, in which the RF field penetrates the imaging region inside the PET ring through the narrow gaps between the shielded PET detector modules. Because the shielded PET ring blocks more than 90% of the imaging region for the transmit field from the body RF coil, it is very challenging to obtain the required RF field inside a full-ring floating PET insert. In this study, experiments were performed on the dependence of RF penetrability on different geometric aspects of the shielded PET modules and PET rings to optimize the design parameters to obtain the required RF field inside the PET ring.We developed several prototype cylindrical full-ring PET inserts using completely enclosed empty RF shield boxes (considered as dummy PET modules). Considering the RF shield box, we conducted studies for different axial lengths (240 and 120 mm) and heights (30 and 45 mm) of the shield boxes. On the other hand, considering the PET ring geometry, we also performed studies on three different categories of PET rings: a long-ring insert (longer than the MRI phantom), a short-ring insert (shorter than the MRI phantom), and a two-ring insert that combined two short-rings. In each ring category, two different inter-shield box gaps (1 and 3 mm) were considered. In the case of the two-ring insert, three different ring-gaps (5, 10, and 20 mm) were studied. In total, 21 PET inserts were studied with an inner diameter (i.d.) of 210 mm. To study the effect of ring diameter, another long-ring insert was studied for the 270 mm i.d. Experiments were conducted for the transmit RF (B1 ) fields and signal-to-noise ratios of spin-echo and gradient-echo images using a homogeneous phantom in a 700 mm bore-diameter 3 T clinical MRI system. RF pulse amplitudes generated automatically by the MRI system were recorded for comparison.A PET insert with a 3 mm inter-box gap was found to perform the best, at a level which is acceptable for PET imaging. In the case of an insert of multiple short-rings instead of one long-ring insert, the 5 and 10 mm ring-gaps provided higher RF field penetration. Increasing the inter-box gap improved the RF field penetration, whereas a ring-gap that was too wide concentrated the field near the ring-gap region. Relatively reduced RF power was required for wider inter-box gap or ring-gap or larger shield box height. Moreover, the rectangular shield box outperformed the trapezoidal shield box. On the other hand, when we changed the inner or outer diameter of the PET ring by keeping the same transaxial width of the shield boxes, we did not see any noticeable variation.Our study results provide comprehensive guidance on the geometrical design aspects of RF-penetrable PET inserts for efficient RF penetration inside the PET ring. By choosing proper geometric design parameters, we could get the RF field that was similar to the MRI-only case.
View details for PubMedID 30118140
-
Performance evaluation of RF coils integrated with an RF-penetrable PET insert for simultaneous PET/MRI.
Magnetic resonance in medicine
2018
Abstract
PURPOSE: An "RF-penetrable" PET insert that allows the MR body coil to be used for RF transmission was developed to make it easier for an existing MR center to achieve simultaneous PET/MRI. This study focuses on experiments and analyses to study PET/RF coil configurations for simultaneous PET/MR studies.METHODS: To investigate the appropriate RF coil design, a transmit/receive (TX/RX) birdcage coil and an RX-only phased-array coil (TX from body coil), both fitting inside the PET ring were built and characterized. For MR performance evaluation, B1 field uniformity and MR image SNR were calculated. PET photon attenuation due to each coil was studied by means of CT-based attenuation maps and reconstructed PET images.RESULTS: When using the RX-only phased-array coil (TX from body coil), compared with the TX/RX birdcage coil, the B1 field uniformity and the MR image (gradient echo and fast spin echo) SNR increased by 2.4±4.8%, 386.1±62.3%, and 205.0±56.5%, respectively. Although some components of the coil were distributed within the PET FOV, no significant PET photon attenuation was shown in the CT-based attenuation map and reconstructed PET images.CONCLUSION: RF coil configurations for an RF-penetrable PET insert for simultaneous PET/MRI were studied. The RX-only phased-array coil (TX from body coil) outperformed the TX/RX birdcage coil with improved MR performance as well as negligible PET photon attenuation.
View details for PubMedID 30260501
-
MR Performance in the Presence of a Radio Frequency-Penetrable Positron Emission Tomography (PET) Insert for Simultaneous PET/MRI
IEEE TRANSACTIONS ON MEDICAL IMAGING
2018; 37 (9): 2060–69
Abstract
Despite the great promise of integrated positron emission tomography (PET)/magnetic resonance (MR) imaging to add molecular information to anatomical and functional MR, its potential impact in medicine is diminished by a very high cost, limiting its dissemination. An RF-penetrable PET ring that can be inserted into any existing MR system has been developed to address this issue. Employing optical signal transmission along with battery power enables the PET ring insert to electrically float with respect to the MR system. Then, inter-modular gaps of the PET ring allow the RF transmit field from the standard built-in body coil to penetrate into the PET fields-of-view (FOV) with some attenuation that can be compensated for. MR performance, including RF noise, magnetic susceptibility, RF penetrability through and $B_{1}$ uniformity within the PET insert, and MR image quality, were analyzed with and without the PET ring present. The simulated and experimentally measured RF field attenuation factors with the PET ring present were -2.7 and -3.2 dB, respectively. The magnetic susceptibility effect (0.063 ppm) and noise emitted from the PET ring in the MR receive channel were insignificant. $B_{1}$ homogeneity of a spherical agar phantom within the PET ring FOV dropped by 8.4% and MR image SNR was reduced by 3.5 and 4.3 dB with the PET present for gradient-recalled echo and fast-spin echo, respectively. This paper demonstrates, for the first time, an RF-penetrable PET insert comprising a full ring of operating detectors that achieves simultaneous PET/MR using the standard built-in body coil as the RF transmitter.
View details for DOI 10.1109/TMI.2018.2815620
View details for Web of Science ID 000443877100010
View details for PubMedID 29993864
-
Performance study of a radio-frequency field-penetrable PET insert for simultaneous PET/MRI.
IEEE transactions on radiation and plasma medical sciences
2018; 2 (5): 422-431
Abstract
Hybrid positron emission tomography (PET)/magnetic resonance imaging (MRI) has risen to the cutting edge of medical imaging technology as it allows simultaneous acquisition of structural, functional and molecular information of the patient. A PET insert that can be installed into existing MR systems can in principle reduce the cost barriers for an existing MR site to achieve simultaneous PET/MRI compared to procuring an integrated PET+MRI system. The PET insert systems developed so far for PET/MRI require the RF transmitter coil to reside inside the PET ring as those PET inserts block the RF fields from the MRI system. Here we report for the first time on the performance of a full-ring brain-sized "RF-penetrable" PET insert we have recently completed. This insert allows the RF fields generated by the built-in body coil to penetrate the PET ring. The PET insert comprises a ring of 16 detector modules employing electro-optical coupled signal transmission and a multiplexing framework based on compressed sensing. Energy resolution, coincidence timing resolution (CTR), photopeak position, and coincidence count rate were acquired outside and inside a 3-Tesla MRI system under simultaneous acquisition to evaluate the impact of MRI on the PET performance. Coincidence count rate performance was evaluated by acquiring a cylinder source with high initial activity decaying over time. Tomographic imaging of two phantoms, a custom 6.5-cm diameter resolution phantom with hot rods of four different sizes (2.8 mm, 3.2 mm, 4.2 mm, and 5.2 mm diameter) and a 3D Hoffman brain phantom, were performed to evaluate the imaging capability of the PET insert. The energy resolution at 511 keV and CTR acquired by the PET insert were 16.2±0.1% and 5.3±0.1 ns FWHM, respectively, and remained stable during MRI operation except when the EPI sequence was applied. The PET system starts to show saturation in coincidence count rate at 2.76 million photon counts per second. Most of the 2.8-mm diameter hot rods and main features of the 3D Hoffman brain phantom were resolved by the PET insert, demonstrating its high spatial resolution and capability to image a complex tracer distribution mimicking that seen in the human brain.
View details for DOI 10.1109/TRPMS.2018.2852686
View details for PubMedID 30911706
View details for PubMedCentralID PMC6430135
-
Performance Study of a Radio-Frequency Field-Penetrable PET Insert for Simultaneous PET/MRI
IEEE TRANSACTIONS ON RADIATION AND PLASMA MEDICAL SCIENCES
2018; 2 (5): 422–31
View details for DOI 10.1109/TRPMS.2018.2852686
View details for Web of Science ID 000456150700004
-
Improved single photon time resolution for analog SiPMs with front end readout that reduces influence of electronic noise.
Physics in medicine and biology
2018
Abstract
A key step to improving the coincidence time resolution of positron emission tomography detectors that exploit populations of prompt photon emissions is improving the single photon time resolution (SPTR) of silicon photomultipliers (SiPMs). The influence of electronic noise has previously been identified as the dominant factor affecting SPTR for large area, analog SiPMs. In this work, we measure the achievable SPTR with front end electronic readout that minimizes the influence of electronic noise. With this new readout circuit, the SPTR measured for one FBK NUV single avalanche photodiode (SPAD) was also achieved with a 1x1 mm<sup>2</sup> FBK NUV SiPM. SPTR for large area devices was also significantly improved. The measured SPTRs for 3x3 mm<sup>2</sup> Hamamatsu and SensL SiPMs were ≤150 ps FWHM, and SPTR ≤100 ps FWHM was measured for 3x3 mm<sup>2</sup> and 4x4 mm<sup>2</sup> FBK NUV and NUV-HD SiPMs. We also explore additional factors affecting the achievable SPTR for large area, analog SiPMs when the contribution of electronic noise is minimized and pinpoint potential areas of improvement to further reduce the SPTR of large area sensors towards that achievable for a single SPAD.
View details for PubMedID 30129562
-
Evaluation of a clinical TOF-PET detector design that achieves ≤100 ps coincidence time resolution.
Physics in medicine and biology
2018
Abstract
Commercially available clinical positron emission tomography (PET) detectors employ scintillation crystals that are long (20 mm length) and narrow (4-5 mm width) optically coupled on their narrow end to a photosensor. The aspect ratio of this traditional crystal rod conguration and 511 keV photon attenuation properties yield signicant variances in scintillation light collection efficiency and transit time to the photodetector, due to variations in the 511 keV photon interaction depth in the crystal. These variances contribute significantly to coincidence time resolution degradation. If instead, crystals are coupled to a photosensor on their long side, near-complete light collection efficiency can be achieved, and scintillation photon transit time jitter is substantially reduced. In this work, we compare the achievable coincidence time resolution (CTR) of LGSO:Ce(0.025 mol%) crystals 3-20 mm in length when optically coupled to silicon photomultipliers (SiPMs) on either their short end or long side face. In this "side readout" conguration, a CTR of 102±2 ps FWHM was measured with 2.9x.2.9x20 mm<sup>3</sup> crystals coupled to rows of 3x3 mm<sup>2</sup> SensL-J SiPMs using leading edge time pickoff and a single timing channel. This is in contrast to a CTR of 137±3 ps FWHM when the same crystals were coupled to single 3x3 mm<sup>2</sup> SiPMs on their narrow ends. We further study the statistical limit on CTR using side readout via the Cramer-Rao lower bound (CRLB), with consideration given to ongoing work to further improve photosensor technologies and exploit fast phenomena to ultimately achieve 10 ps FWHM CTR. Potential design aspects of scalable front-end signal processing readout electronics using this side readout conguration are discussed. Altogether, we demonstrate that the side readout conguration offers an immediate solution for 100 ps CTR clinical PET detectors and mitigates factors prohibiting future efforts to achieve 10 ps FWHM CTR.
View details for PubMedID 29762136
-
Gray: a ray tracing-based Monte Carlo simulator for PET
PHYSICS IN MEDICINE AND BIOLOGY
2018; 63 (10): 105019
Abstract
Monte Carlo simulation software plays a critical role in PET system design. Performing complex, repeated Monte Carlo simulations can be computationally prohibitive, as even a single simulation can require a large amount of time and a computing cluster to complete. Here we introduce Gray, a Monte Carlo simulation software for PET systems. Gray exploits ray tracing methods used in the computer graphics community to greatly accelerate simulations of PET systems with complex geometries. We demonstrate the implementation of models for positron range, annihilation acolinearity, photoelectric absorption, Compton scatter, and Rayleigh scatter. For validation, we simulate the GATE PET benchmark, and compare energy, distribution of hits, coincidences, and run time. We show a [Formula: see text] speedup using Gray, compared to GATE for the same simulation, while demonstrating nearly identical results. We additionally simulate the Siemens Biograph mCT system with both the NEMA NU-2 scatter phantom and sensitivity phantom. We estimate the total sensitivity within [Formula: see text]% when accounting for differences in peak NECR. We also estimate the peak NECR to be [Formula: see text] kcps, or within [Formula: see text]% of published experimental data. The activity concentration of the peak is also estimated within 1.3%.
View details for PubMedID 29701603
-
Design and Performance of a 1 mm(3) Resolution Clinical PET System Comprising 3-D Position Sensitive Scintillation Detectors
IEEE TRANSACTIONS ON MEDICAL IMAGING
2018; 37 (4): 1058–66
Abstract
We are developing a 1-mm3 resolution, high-sensitivity positron emission tomography (PET) system for loco-regional cancer imaging. The completed system will comprise two cm detector panels and contain 4 608 position sensitive avalanche photodiodes (PSAPDs) coupled to arrays of mm3 LYSO crystal elements for a total of 294 912 crystal elements. For the first time, this paper summarizes the design and reports the performance of a significant portion of the final clinical PET system, comprising 1 536 PSAPDs, 98 304 crystal elements, and an active field-of-view (FOV) of cm. The sub-system performance parameters, such as energy, time, and spatial resolutions are predictive of the performance of the final system due to the modular design. Analysis of the multiplexed crystal flood histograms shows 84% of the crystal elements have>99% crystal identification accuracy. The 511 keV photopeak energy resolution was 11.34±0.06% full-width half maximum (FWHM), and coincidence timing resolution was 13.92 ± 0.01 ns FWHM at 511 keV. The spatial resolution was measured using maximum likelihood expectation maximization reconstruction of a grid of point sources suspended in warm background. The averaged resolution over the central 6 cm of the FOV is 1.01 ± 0.13 mm in the X-direction, 1.84 ± 0.20 mm in the Y-direction, and 0.84 ± 0.11 mm in the Z-direction. Quantitative analysis of acquired micro-Derenzo phantom images shows better than 1.2 mm resolution at the center of the FOV, with subsequent resolution degradation in the y-direction toward the edge of the FOV caused by limited angle tomography effects.
View details for DOI 10.1109/TMI.2018.2799619
View details for Web of Science ID 000428886700021
View details for PubMedID 29621003
-
Standard OSEM vs. regularized PET image reconstruction: qualitative and quantitative comparison using phantom data and various clinical radiopharmaceuticals
AMERICAN JOURNAL OF NUCLEAR MEDICINE AND MOLECULAR IMAGING
2018; 8 (2): 110–18
Abstract
We investigated the block sequential regularized expectation maximization (BSREM) algorithm. ACR phantom measurements with different count statistics and 60 PET/CT research scans from the GE Discovery 600 and 690 scanners were reconstructed using BSREM and the standard-of-care OSEM algorithm. Hot concentration recovery and cold contrast recovery were measured from the phantom data. Two experienced nuclear medicine physicians reviewed the clinical images blindly. Liver SNR liver and SUVmax of the smallest lesion detected in each patient were also measured. The relationship between the maximum and mean hot concentration recovery remained monotonic below 1.5 maximum concentration recovery. The mean cold contrast recovery remained stable even for decreasing statistics with a highest absolute difference of 4% in air and 2% in bone for each reconstruction method. The D600 images resulted in an average 30% higher SNR than the D690 data for BSREM; there was no difference in SNR results between the two scanners with OSEM. The small lesion SUVmax values on the BSREM images with β of 250, 350 and 450, respectively were on average 80%, 60% and 43% (D690) and 42%, 29%, and 21% (D600) higher than in the case of OSEM. In conclusion, BSREM can outperform OSEM in terms of contrast recovery and organ uniformity over a range of PET tracers, but a task dependent regularization strength parameter (beta) selection may be necessary. To avoid image noise and artifacts, our results suggest that using higher beta values (at least 350) may be appropriate, especially if the data has low count statistics.
View details for PubMedID 29755844
View details for PubMedCentralID PMC5944826
-
Ionizing radiation induces femtosecond time scale modulations of a material's optical properties
SPIE-INT SOC OPTICAL ENGINEERING. 2018
View details for DOI 10.1117/12.2319435
View details for Web of Science ID 000452820500002
-
Positioning true coincidences that undergo inter-and intra-crystal scatter for a sub-mm resolution cadmium zinc telluride-based PET system
PHYSICS IN MEDICINE AND BIOLOGY
2018; 63 (2): 025012
Abstract
The kinematics of Compton scatter can be used to estimate the interaction sequence of inter-crystal scatter interactions in 3D position-sensitive cadmium zinc telluride (CZT) detectors. However, in the case of intra-crystal scatter in a 'cross-strip' CZT detector slab, multiple anode and cathode strips may be triggered, creating position ambiguity due to uncertainty in possible combinations of anode-cathode pairings. As a consequence, methods such as energy-weighted centroid are not applicable to position the interactions. In practice, since the event position is uncertain, these intra-crystal scatters events are discarded. In this work, we studied using Compton kinematics and a 'direction difference angle' to provide a method to correctly identify the anode-cathode pair corresponding to the first interaction position in an intra-crystal scatter event. GATE simulation studies of a NEMA NU4 image quality phantom in a small animal positron emission tomography under development composed of 192, [Formula: see text] mm CZT crystals shows that 47% of total numbers of multiple-interaction photon events (MIPEs) are intra-crystal scatter with a 100 keV lower energy threshold per interaction. The sensitivity of the system increases from 0.6 to 4.10 (using 10 keV as system lower energy threshold) by including rather than discarding inter- and intra-crystal scatter. The contrast-to-noise ratio (CNR) also increases from [Formula: see text] to [Formula: see text]. It was shown that a higher energy threshold limits the capability of the system to detect MIPEs and reduces CNR. Results indicate a sensitivity increase (4.1 to 5.88) when raising the lower energy threshold (10 keV to 100 keV) for the case of only two-interaction events. In order to detect MIPEs accurately, a low noise system capable of a low energy threshold (10 keV) per interaction is desired.
View details for DOI 10.1088/1361-6560/aa9a2b
View details for Web of Science ID 000419796600012
View details for PubMedID 29131809
View details for PubMedCentralID PMC5785233
-
Clinical evaluation of TOF versus non-TOF on PET artifacts in simultaneous PET/MR: a dual centre experience.
European journal of nuclear medicine and molecular imaging
2017; 44 (7): 1223-1233
Abstract
Our objective was to determine clinically the value of time-of-flight (TOF) information in reducing PET artifacts and improving PET image quality and accuracy in simultaneous TOF PET/MR scanning.A total 65 patients who underwent a comparative scan in a simultaneous TOF PET/MR scanner were included. TOF and non-TOF PET images were reconstructed, clinically examined, compared and scored. PET imaging artifacts were categorized as large or small implant-related artifacts, as dental implant-related artifacts, and as implant-unrelated artifacts. Differences in image quality, especially those related to (implant) artifacts, were assessed using a scale ranging from 0 (no artifact) to 4 (severe artifact).A total of 87 image artifacts were found and evaluated. Four patients had large and eight patients small implant-related artifacts, 27 patients had dental implants/fillings, and 48 patients had implant-unrelated artifacts. The average score was 1.14 ± 0.82 for non-TOF PET images and 0.53 ± 0.66 for TOF images (p < 0.01) indicating that artifacts were less noticeable when TOF information was included.Our study indicates that PET image artifacts are significantly mitigated with integration of TOF information in simultaneous PET/MR. The impact is predominantly seen in patients with significant artifacts due to metal implants.
View details for DOI 10.1007/s00259-017-3619-2
View details for PubMedID 28124091
-
Low eddy current RF shielding enclosure designs for 3T MR applications.
Magnetic resonance in medicine
2017
Abstract
Magnetic resonance-compatible medical devices operate within the MR environment while benefitting from the superior anatomic information of MRI. Avoiding electromagnetic interference between such instrumentation and the MR system is crucial. In this work, various shielding configurations for positron emission tomography (PET) detectors were studied and analyzed regarding radiofrequency (RF) shielding effectiveness and gradient-induced eddy current performances. However, the results of this work apply to shielding considerations for any MR-compatible devices.Six shielding enclosure configurations with various thicknesses, patterns, and materials were designed: solid and segmented copper, phosphor bronze mesh (PBM), and carbon fiber composite (CFC). A series of tests was performed on RF shielding effectiveness and the gradient-induced eddy current.For the shielding effectiveness, the solid copper with various thickness and PBM configurations yield significantly better shielding effectiveness (>15 dB) compared with CFC and segmented configurations. For the gradient-induced eddy current performance, the solid copper shielding configurations with different thicknesses showed significantly worse results, up to a factor of 3.89 dB, compared with the segmented copper, PBM, and the CFC configurations.We evaluated the RF shielding effectiveness and the gradient-induced eddy current artifacts of several shielding designs, and only the PBM showed positive outcomes for both aspects. Magn Reson Med, 2017. © 2017 International Society for Magnetic Resonance in Medicine.
View details for DOI 10.1002/mrm.26766
View details for PubMedID 28585334
-
Studies of a Next Generation Silicon-Photomultiplier-Based Time-of-Flight PET/CT System.
Journal of nuclear medicine
2017
Abstract
This article presents system performance studies of the Discovery MI PET/CT system, a new time-of-flight (TOF) system based on silicon photomultipliers. System performance and clinical imaging comparisons were made between this next-generation system and other commercially available PET/CT and PET/MR systems, as well as between different reconstruction algorithms. Methods: Spatial resolution, sensitivity, NECR, scatter fraction, count rate accuracy, and image quality were characterized with the NEMA NU-2 2012 standards. Energy and coincidence time resolution were measured. Tests were conducted independently and results were averaged on two Discovery MI scanners installed at Stanford and Uppsala University Hospitals. Back-to-back patient scans were also performed between the Discovery MI PET/CT, Discovery 690 PET/CT, and SIGNA PET/MR systems. Clinical images were reconstructed with both ordered-subset expectation maximization (OSEM) and the "Q.Clear" reconstruction algorithms, and examined qualitatively. Results: The averaged full-width half max (FWHM) of the radial/tangential/axial spatial resolution reconstructed with FBP at 1, 10, and 20 cm from the system center are, respectively, 4.10/4.19/4.48 mm, 5.47/4.49/6.01 mm, and 7.53/4.90/6.10 mm. The averaged sensitivity is 13.7 cps/kBq at the center of the FOV. Averaged peak noise equivalent count rate is 193.4 kcps at 21.9 kBq/mL with a scatter fraction of 40.6%. The averaged contrast recovery coefficients for the image quality phantom are 53.7/64.0/73.1/82.7/86.8/90.7 for the 10/13/17/22/28/37 mm diameter spheres. The average photopeak energy resolution is 9.40% FWHM and the average coincidence time resolution is 375.4 ps FWHM. Clinical image comparisons between the PET/CT systems demonstrate the high quality of the Discovery MI system. Comparisons between the Discovery MI and SIGNA systems show similar spatial resolution and overall imaging performance. Lastly, results indicate significant image quality and contrast-to-noise performance enhancement for the "Q.Clear" reconstruction algorithm when compared to OSEM. Conclusion: Excellent performance was achieved with the new Discovery MI system, including 375 ps FWHM coincidence time resolution and sensitivity of 14 cps/kBq. Comparisons between different image reconstruction algorithms and other multimodal SiPM and non-SiPM-based PET detector system designs indicate substantial performance enhancements are possible with this next-generation system.
View details for DOI 10.2967/jnumed.117.189514
View details for PubMedID 28450566
-
Robust Timing Calibration for PET Using L1-Norm Minimization.
IEEE transactions on medical imaging
2017
Abstract
Positron emission tomography (PET) relies on accurate timing information to pair two 511-keV photons into a coincidence event. Calibration of time delays between detectors becomes increasingly important as the timing resolution of detector technology improves, as a calibration error can quickly become a dominant source of error. Previous work has shown that the maximum likelihood estimate of these delays can be calculated by least squares estimation, but an approach is not tractable for complex systems and degrades in the presence of randoms. We demonstrate the original problem to be solvable iteratively using the LSMR algorithm. Using the LSMR, we solve for 60 030 delay parameters, including energy-dependent delays, in 4.5 s, using 1 000 000 coincidence events for a two-panel system dedicated to clinical locoregional imaging. We then extend the original least squares problem to be robust to random coincidences and low statistics by implementing l1-norm minimization using the alternating direction method of the multipliers (ADMM) algorithm. The ADMM algorithm converges after six iterations, or 20.6 s, and improves the timing resolution from 64.7 ± 0.1s full width at half maximum (FWHM) uncalibrated to 15.63 ± 0.02ns FWHM. We also demonstrate this algorithm's applicability to commercial systems using a GE Discovery 690 PET/CT. We scan a rotating transmission source, and after subtracting the 511-keV photon time-of-flight due to the source position, we calculate 13 824 per-crystal delays using 5 000 000 coincidence events in 3.78 s with three iterations, while showing a timing resolution improvement that is significantly better than previous calibration methods in the literature.
View details for DOI 10.1109/TMI.2017.2681939
View details for PubMedID 28320653
-
Time-over-threshold for pulse shape discrimination in a time-of-flight phoswich PET detector
PHYSICS IN MEDICINE AND BIOLOGY
2017; 62 (1): 258-271
Abstract
It is well known that a PET detector capable of measuring both photon time-of-flight (TOF) and depth-of-interaction (DOI) improves the image quality and accuracy. Phoswich designs have been realized in PET detectors to measure DOI for more than a decade. However, PET detectors based on phoswich designs put great demand on the readout circuits, which have to differentiate the pulse shape produced by different crystal layers. A simple pulse shape discrimination approach is required to realize the phoswich designs in a clinical PET scanner, which consists of thousands of scintillation crystal elements. In this work, we studied time-over-threshold (ToT) as a pulse shape parameter for DOI. The energy, timing and DOI performance were evaluated for a phoswich detector design comprising [Formula: see text] mm LYSO:Ce crystal optically coupled to [Formula: see text] mm calcium co-doped LSO:Ce,Ca(0.4%) crystal read out by a silicon photomultiplier (SiPM). A DOI accuracy of 97.2% has been achieved for photopeak events using the proposed time-over-threshold (ToT) processing. The energy resolution without correction for SiPM non-linearity was [Formula: see text]% and [Formula: see text]% FWHM at 511 keV for LYSO and LSO crystal layers, respectively. The coincidence time resolution for photopeak events ranges from 164.6 ps to 183.1 ps FWHM, depending on the layer combinations. The coincidence time resolution for inter-crystal scatter events ranges from 214.6 ps to 418.3 ps FWHM, depending on the energy windows applied. These results show great promises of using ToT for pulse shape discrimination in a TOF phoswich detector since a ToT measurement can be easily implemented in readout electronics.
View details for DOI 10.1088/1361-6560/62/1/258
View details for Web of Science ID 000391567700007
View details for PubMedID 27991437
View details for PubMedCentralID PMC5280037
-
New-generation small animal positron emission tomography system for molecular imaging.
Journal of medical imaging (Bellingham, Wash.)
2017; 4 (1): 011008-?
Abstract
The next generation of discoveries in molecular imaging requires positron emission tomography (PET) systems with high spatial resolution and high sensitivity to visualize and quantify low concentrations of molecular probes. The goal of this work is to assemble and explore such a system. We use cadmium zinc telluride (CZT) to achieve high spatial resolution, three-dimensional interaction positioning, and excellent energy resolution. The CZT crystals are arranged in an edge-on configuration with a minimum gap of [Formula: see text] in a four-sided panel geometry to achieve superior photon sensitivity. The developed CZT detectors and readout electronics were scaled up to complete significant portions of the final PET system. The steering electrode bias and the amplitude of the analog signals for time measurement were optimized to improve performance. The energy resolution (at 511 keV) over 468 channels is [Formula: see text] full-width-at-half-maximum (FWHM). The spatial resolution is [Formula: see text] FWHM. The time resolution of six CZT crystals in coincidence with six other CZT crystals is 37 ns. With high energy and spatial resolution and the relatively low random rate for small animal imaging, this system shows promise to be very useful for molecular imaging studies.
View details for DOI 10.1117/1.JMI.4.1.011008
View details for PubMedID 28097211
View details for PubMedCentralID PMC5228551
-
An Expectation Maximization Method for Joint Estimation of Emission Activity Distribution and Photon Attenuation Map in PET
IEEE TRANSACTIONS ON MEDICAL IMAGING
2017; 36 (1): 214-224
Abstract
A maximum likelihood expectation maximization (MLEM) method is proposed for joint estimation of emission activity distribution and photon attenuation map from positron emission tomography (PET) emission data alone. The method is appealing since: (i) it guarantees monotonic likelihood increase to a local extremum, (ii) does not require arbitrary parameters, and (iii) guarantees the positivity of the estimated distributions. Moreover, we propose a discrete Poisson data acquisition model and numerical algorithm for: (i) efficient graphics processing unit (GPU) based formulation, and (ii) a closed form exact solution for the MLEM update equations, which is essential for accurate and robust estimation. Numerical experiments indicate that in the presence of noise, joint EMAA estimation converges to the true emission activity distribution with root mean square errors of 4% and 0.5% respectively in estimation of lung- and myocardial emission activity distributions for a computational XCAT thorax phantom.
View details for DOI 10.1109/TMI.2016.2602339
View details for Web of Science ID 000392418000019
View details for PubMedID 27576244
-
Study of material properties important for an optical property modulation-based radiation detection method for positron emission tomography.
Journal of medical imaging (Bellingham, Wash.)
2017; 4 (1): 011010-?
Abstract
We compare the performance of two detector materials, cadmium telluride (CdTe) and bismuth silicon oxide (BSO), for optical property modulation-based radiation detection method for positron emission tomography (PET), which is a potential new direction to dramatically improve the annihilation photon pair coincidence time resolution. We have shown that the induced current flow in the detector crystal resulting from ionizing radiation determines the strength of optical modulation signal. A larger resistivity is favorable for reducing the dark current (noise) in the detector crystal, and thus the higher resistivity BSO crystal has a lower (50% lower on average) noise level than CdTe. The CdTe and BSO crystals can achieve the same sensitivity under laser diode illumination at the same crystal bias voltage condition while the BSO crystal is not as sensitive to 511-keV photons as the CdTe crystal under the same crystal bias voltage. The amplitude of the modulation signal induced by 511-keV photons in BSO crystal is around 30% of that induced in CdTe crystal under the same bias condition. In addition, we have found that the optical modulation strength increases linearly with crystal bias voltage before saturation. The modulation signal with CdTe tends to saturate at bias voltages higher than 1500 V due to its lower resistivity (thus larger dark current) while the modulation signal strength with BSO still increases after 3500 V. Further increasing the bias voltage for BSO could potentially further enhance the modulation strength and thus, the sensitivity.
View details for DOI 10.1117/1.JMI.4.1.011010
View details for PubMedID 28180132
View details for PubMedCentralID PMC5286320
-
Highly multiplexed signal readout for a time-of-flight positron emission tomography detector based on silicon photomultipliers.
Journal of medical imaging (Bellingham, Wash.)
2017; 4 (1): 011012-?
Abstract
Maintaining excellent timing resolution in the generation of silicon photomultiplier (SiPM)-based time-of-flight positron emission tomography (TOF-PET) systems requires a large number of high-speed, high-bandwidth electronic channels and components. To minimize the cost and complexity of a system's back-end architecture and data acquisition, many analog signals are often multiplexed to fewer channels using techniques that encode timing, energy, and position information. With progress in the development SiPMs having lower dark noise, after pulsing, and cross talk along with higher photodetection efficiency, a coincidence timing resolution (CTR) well below 200 ps FWHM is now easily achievable in single pixel, bench-top setups using 20-mm length, lutetium-based inorganic scintillators. However, multiplexing the output of many SiPMs to a single channel will significantly degrade CTR without appropriate signal processing. We test the performance of a PET detector readout concept that multiplexes 16 SiPMs to two channels. One channel provides timing information with fast comparators, and the second channel encodes both position and energy information in a time-over-threshold-based pulse sequence. This multiplexing readout concept was constructed with discrete components to process signals from a [Formula: see text] array of SensL MicroFC-30035 SiPMs coupled to [Formula: see text] Lu1.8Gd0.2SiO5 (LGSO):Ce (0.025 mol. %) scintillators. This readout method yielded a calibrated, global energy resolution of 15.3% FWHM at 511 keV with a CTR of [Formula: see text] FWHM between the 16-pixel multiplexed detector array and a [Formula: see text] LGSO-SiPM reference detector. In summary, results indicate this multiplexing scheme is a scalable readout technique that provides excellent coincidence timing performance.
View details for DOI 10.1117/1.JMI.4.1.011012
View details for PubMedID 28382312
-
Simultaneous PET/MR imaging with a radio frequency-penetrable PET insert.
Medical physics
2017; 44 (1): 112-120
Abstract
A brain sized radio frequency (RF)-penetrable PET insert has been designed for simultaneous operation with MRI systems. This system takes advantage of electro-optical coupling and battery power to electrically float the PET insert relative to the MRI ground, permitting RF signals to be transmitted through small gaps between the modules that form the PET ring. This design facilitates the use of the built-in body coil for RF transmission and thus could be inserted into any existing MR site wishing to achieve simultaneous PET/MR imaging. The PET detectors employ nonmagnetic silicon photomultipliers in conjunction with a compressed sensing signal multiplexing scheme, and optical fibers to transmit analog PET detector signals out of the MRI room for decoding, processing, and image reconstruction.The PET insert was first constructed and tested in a laboratory benchtop setting, where tomographic images of a custom resolution phantom were successfully acquired. The PET insert was then placed within a 3T body MRI system, and tomographic resolution/contrast phantom images were acquired both with only the B0 field present, and under continuous pulsing from different MR imaging sequences.The resulting PET images have comparable contrast-to-noise ratios (CNR) under all MR pulsing conditions: The maximum percent CNR relative difference for each rod type among all four PET images acquired in the MRI system has a mean of 14.0 ± 7.7%. MR images were successfully acquired through the RF-penetrable PET shielding using only the built-in MR body coil, suggesting that simultaneous imaging is possible without significant mutual interference.These results show promise for this technology as an alternative to costly integrated PET/MR scanners; a PET insert that is compatible with any existing clinical MRI system could greatly increase the availability, accessibility, and dissemination of PET/MR.
View details for DOI 10.1002/mp.12031
View details for PubMedID 28102949
View details for PubMedCentralID PMC5372382
-
A multiplexed TOF and DOI capable PET detector using a binary position sensitive network.
Physics in medicine and biology
2016; 61 (21): 7639-7651
Abstract
Time of flight (TOF) and depth of interaction (DOI) capabilities can significantly enhance the quality and uniformity of positron emission tomography (PET) images. Many proposed TOF/DOI PET detectors require complex readout systems using additional photosensors, active cooling, or waveform sampling. This work describes a high performance, low complexity, room temperature TOF/DOI PET module. The module uses multiplexed timing channels to significantly reduce the electronic readout complexity of the PET detector while maintaining excellent timing, energy, and position resolution. DOI was determined using a two layer light sharing scintillation crystal array with a novel binary position sensitive network. A 20 mm effective thickness LYSO crystal array with four 3 mm × 3 mm silicon photomultipliers (SiPM) read out by a single timing channel, one energy channel and two position channels achieved a full width half maximum (FWHM) coincidence time resolution of 180 ± 2 ps with 10 mm of DOI resolution and 11% energy resolution. With sixteen 3 mm × 3 mm SiPMs read out by a single timing channel, one energy channel and four position channels a coincidence time resolution 204 ± 1 ps was achieved with 10 mm of DOI resolution and 15% energy resolution. The methods presented here could significantly simplify the construction of high performance TOF/DOI PET detectors.
View details for PubMedID 27740946
-
A promising new mechanism of ionizing radiation detection for positron emission tomography: modulation of optical properties.
Physics in medicine and biology
2016; 61 (21): 7600-7622
Abstract
Using conventional scintillation detection, the fundamental limit in positron emission tomography (PET) time resolution is strongly dependent on the inherent temporal variances generated during the scintillation process, yielding an intrinsic physical limit for the coincidence time resolution of around 100 ps. On the other hand, modulation mechanisms of the optical properties of a material exploited in the optical telecommunications industry can be orders of magnitude faster. In this paper we borrow from the concept of optics pump-probe measurement to for the first time study whether ionizing radiation can produce modulations of optical properties, which can be utilized as a novel method for radiation detection. We show that a refractive index modulation of approximately [Formula: see text] is induced by interactions in a cadmium telluride (CdTe) crystal from a 511 keV photon source. Furthermore, using additional radionuclide sources, we show that the amplitude of the optical modulation signal varies linearly with both the detected event rate and average photon energy of the radiation source.
View details for PubMedID 27716640
-
Improvements in PET Image Quality in Time of Flight (TOF) Simultaneous PET/MRI.
Molecular imaging and biology
2016; 18 (5): 776-781
Abstract
An integrated positron emission tomography (PET)/magnetic resonance imaging (MRI) scanner with time of flight (TOF) technology is now available for clinical use. The aim of this study is to evaluate the potential of TOF PET in PET/MRI to reduce artifacts in PET images when compared to non-TOF PET/MRI, TOF PET/X-ray computed tomography (CT), and non-TOF PET/CT.All patients underwent a single 2-deoxy-2-[(18)F]fluoro-D-glucose ([(18)F]FDG) injection, followed first by PET/CT, and subsequently by PET/MRI. PET/CT exams were requested as standard-of-care for oncological indications. Using the PET acquisitions datasets, 4 series of images (TOF PET/CT, non-TOF PET/CT, TOF PET/MRI, and non-TOF PET/MRI) were reconstructed. These image series were visually evaluated for: (1) dental metal artifacts, (2) breathing artifacts, and (3) pelvic artifacts due to scatter correction errors from high bladder [(18)F]FDG concentration. PET image quality was assessed by a 3-point scale (1-clinically significant artifact, 2-non clinically significant artifact, and 3-no artifact).Twenty-five patients (mean ± SD age: 56 ± 13 years old; female: 10, male: 15) were enrolled. TOF PET/MRI, non-TOF PET/MRI, TOF PET/CT, and non-TOF PET/CT scores 2.8, 2.5, 2.4, and 2.3, respectively for the presence of dental artifacts, 2.8, 2.5, 2.2, and 1.9, respectively, for the presence of breathing artifacts, and 2.7, 1.7, 2.0, and 1.3, respectively, for the presence of pelvic artifacts TOF PET/MRI images showed the highest image quality scores among the 4 datasets of PET images.The superior timing resolution and resulting TOF capability of the new PET/MRI scanner improved PET image quality in this cohort by reducing artifacts compared to non-TOF PET/MRI, TOF PET/CT, and non-TOF PET/CT.
View details for DOI 10.1007/s11307-016-0939-8
View details for PubMedID 26884058
-
MR Performance Comparison of a PET/MR System Before and After SiPM-Based Time-of-Flight PET Detector Insertion
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2016; 63 (5): 2419-2423
View details for DOI 10.1109/TNS.2016.2529624
View details for Web of Science ID 000386229200001
-
Characterization of a sub-assembly of 3D position sensitive cadmium zinc telluride detectors and electronics from a sub-millimeter resolution PET system.
Physics in medicine and biology
2016; 61 (18): 6733-6753
Abstract
Cadmium zinc telluride (CZT) offers key advantages for small animal positron emission tomography (PET), including high spatial and energy resolution and simple metal deposition for fabrication of very small pixel arrays. Previous studies have investigated the intrinsic spatial, energy, and timing resolution of an individual sub-millimeter resolution CZT detector. In this work we present the first characterization results of a system of these detectors. The 3D position sensitive dual-CZT detector module and readout electronics developed in our lab was scaled up to complete a significant portion of the final PET system. This sub-system was configured as two opposing detection panels containing a total of twelve [Formula: see text] mm monolithic CZT crystals for proof of concept. System-level characterization studies, including optimizing the trigger threshold of each channel's comparators, were performed. (68)Ge and (137)Cs radioactive isotopes were used to characterize the energy resolution of all 468 anode channels in the sub-system. The mean measured global 511 keV photopeak energy resolution over all anodes was found to be [Formula: see text]% FWHM after correction for photon interaction depth-dependent signal variation. The measured global time resolution was 37 ns FWHM, a parameter to be further optimized, and the intrinsic spatial resolution was 0.76 mm FWHM.
View details for PubMedID 27551981
-
An Expectation Maximization Method for Joint Estimation of Emission Activity Distribution and Photon Attenuation Map in PET.
IEEE transactions on medical imaging
2016
Abstract
A maximum likelihood expectation maximization (MLEM) method is proposed for joint estimation of emission activity distribution and photon attenuation map from positron emission tomography (PET) emission data alone. The method is appealing since: (i) it guarantees monotonic likelihood increase to a local extremum, (ii) does not require arbitrary parameters, and (iii) guarantees the positivity of the estimated distributions. Moreover, we propose a discrete Poisson data acquisition model and numerical algorithm for: (i) efficient graphics processing unit (GPU) based formulation, and (ii) a closed form exact solution for the MLEM update equations, which is essential for accurate and robust estimation. Numerical experiments indicate that in the presence of noise, joint EMAA estimation converges to the true emission activity distribution with root mean square errors of 4% and 0.5% respectively in estimation of lung- and myocardial emission activity distributions for a computational XCAT thorax phantom.
View details for DOI 10.1109/TMI.2016.2602339
View details for PubMedID 28113621
-
Analog filtering methods improve leading edge timing performance of multiplexed SiPMs.
Physics in medicine and biology
2016; 61 (16): N427-40
Abstract
Multiplexing many SiPMs to a single readout channel is an attractive option to reduce the readout complexity of high performance time of flight (TOF) PET systems. However, the additional dark counts and shaping from each SiPM cause significant baseline fluctuations in the output waveform, degrading timing measurements using a leading edge threshold. This work proposes the use of a simple analog filtering network to reduce the baseline fluctuations in highly multiplexed SiPM readouts. With 16 SiPMs multiplexed, the FWHM coincident timing resolution for single [Formula: see text] mm LYSO crystals was improved from 401 ± 4 ps without filtering to 248 ± 5 ps with filtering. With 4 SiPMs multiplexed, using an array of [Formula: see text] mm LFS crystals the mean time resolution was improved from 436 ± 6 ps to 249 ± 2 ps. Position information was acquired with a novel binary positioning network. All experiments were performed at room temperature with no active temperature regulation. These results show a promising technique for the construction of high performance multiplexed TOF PET readout systems using analog leading edge timing pickoff.
View details for DOI 10.1088/0031-9155/61/16/N427
View details for PubMedID 27484131
-
Design Features and Mutual Compatibility Studies of the Time-of-Flight PET Capable GE SIGNA PET/MR System.
IEEE transactions on medical imaging
2016; 35 (8): 1907-1914
Abstract
A recent entry into the rapidly evolving field of integrated PET/MR scanners is presented in this paper: a whole body hybrid PET/MR system (SIGNA PET/MR, GE Healthcare) capable of simultaneous acquisition of both time-of-flight (TOF) PET and high resolution MR data. The PET ring was integrated into an existing 3T MR system resulting in a (patient) bore opening of 60 cm diameter, with a 25 cm axial FOV. PET performance was evaluated both on the standalone PET ring and on the same detector integrated into the MR system, to assess the level of mutual interference between both subsystems. In both configurations we obtained detector performance data. PET detector performance was not significantly affected by integration into the MR system. The global energy resolution was within 2% (10.3% versus 10.5%), and the system coincidence time resolution showed a maximum change of < 3% (385 ps versus 394 ps) when measured outside MR and during simultaneous PET/MRI acquisitions, respectively. To evaluate PET image quality and resolution, the NEMA IQ phantom was acquired with MR idle and with MR active. Impact of PET on MR IQ was assessed by comparing SNR with PET acquisition on and off. B0 and B1 homogeneities were acquired before and after the integration of the PET ring inside the magnet. In vivo brain and whole body head-to-thighs data were acquired to demonstrate clinical image quality.
View details for DOI 10.1109/TMI.2016.2537811
View details for PubMedID 26978664
-
NEMA NU 2-2012 performance studies for the SiPM-based ToF-PET component of the GE SIGNA PET/MR system
MEDICAL PHYSICS
2016; 43 (5)
Abstract
The GE SIGNA PET/MR is a new whole body integrated time-of-flight (ToF)-PET/MR scanner from GE Healthcare. The system is capable of simultaneous PET and MR image acquisition with sub-400 ps coincidence time resolution. Simultaneous PET/MR holds great potential as a method of interrogating molecular, functional, and anatomical parameters in clinical disease in one study. Despite the complementary imaging capabilities of PET and MRI, their respective hardware tends to be incompatible due to mutual interference. In this work, the GE SIGNA PET/MR is evaluated in terms of PET performance and the potential effects of interference from MRI operation.The NEMA NU 2-2012 protocol was followed to measure PET performance parameters including spatial resolution, noise equivalent count rate, sensitivity, accuracy, and image quality. Each of these tests was performed both with the MR subsystem idle and with continuous MR pulsing for the duration of the PET data acquisition. Most measurements were repeated at three separate test sites where the system is installed.The scanner has achieved an average of 4.4, 4.1, and 5.3 mm full width at half maximum radial, tangential, and axial spatial resolutions, respectively, at 1 cm from the transaxial FOV center. The peak noise equivalent count rate (NECR) of 218 kcps and a scatter fraction of 43.6% are reached at an activity concentration of 17.8 kBq/ml. Sensitivity at the center position is 23.3 cps/kBq. The maximum relative slice count rate error below peak NECR was 3.3%, and the residual error from attenuation and scatter corrections was 3.6%. Continuous MR pulsing had either no effect or a minor effect on each measurement.Performance measurements of the ToF-PET whole body GE SIGNA PET/MR system indicate that it is a promising new simultaneous imaging platform.
View details for DOI 10.1118/1.4945416
View details for Web of Science ID 000378924200034
View details for PubMedID 27147345
-
Achieving fast timing performance with multiplexed SiPMs.
Physics in medicine and biology
2016; 61 (7): 2879-2892
Abstract
Using time of flight (ToF) measurements for positron emission tomography (PET) is an attractive avenue for increasing the signal to noise (SNR) ratio of PET images. However, achieving excellent time resolution required for high SNR gain using silicon photomultipliers (SiPM) requires many resource heavy high bandwidth readout channels. A method of multiplexing many SiPM signals into a single electronic channel would greatly simplify ToF PET systems. However, multiplexing SiPMs degrades time resolution because of added dark counts and signal shaping. In this work the relative contribution of dark counts and signal shaping to timing degradation is simulated and a baseline correction technique to mitigate the effect of multiplexing on the time resolution of analog SiPMs is simulated and experimentally verified. A charge sharing network for multiplexing is proposed and tested. Results show a full width at half maximum (FWHM) coincidence time resolution of [Formula: see text] ps for a single 3 mm × 3 mm × 20 mm LYSO scintillation crystals coupled to an array of sixteen 3 mm × 3 mm SiPMs that are multiplexed to a single timing channel (in addition to 4 position channels). A [Formula: see text] array of 3 mm × 3 mm × 20 mm LFS crystals showed an average FWHM coincidence time resolution of [Formula: see text] ps using the same timing scheme. All experiments were performed at room temperature with no thermal regulation. These results show that excellent time resolution for ToF can be achieved with a highly multiplexed analog SiPM readout.
View details for DOI 10.1088/0031-9155/61/7/2879
View details for PubMedID 26987898
-
Advances in coincidence time resolution for PET.
Physics in medicine and biology
2016; 61 (6): 2255-2264
Abstract
Coincidence time resolution (CTR), an important parameter for time-of-flight (TOF) PET performance, is determined mainly by properties of the scintillation crystal and photodetector used. Stable production techniques for LGSO:Ce (Lu1.8Gd0.2SiO5:Ce) with decay times varying from ∼30-40 ns have been established over the past decade, and the decay time can be accurately controlled with varying cerium concentration (0.025-0.075 mol%). This material is promising for TOF-PET, as it has similar light output and equivalent stopping power for 511 keV annihilation photons compared to industry standard LSO:Ce and LYSO:Ce, and the decay time is improved by more than 30% with proper Ce concentration. This work investigates the achievable CTR with LGSO:Ce (0.025 mol%) when coupled to new silicon photomultipliers. Crystal element dimension is another important parameter for achieving fast timing. 20 mm length crystal elements achieve higher 511 keV photon detection efficiency, but also introduce higher scintillation photon transit time variance. 3 mm length crystals are not practical for PET, but have reduced scintillation transit time spread. The CTR between pairs of [Formula: see text] mm(3)and [Formula: see text] mm(3) LGSO:Ce crystals was measured to be [Formula: see text] and [Formula: see text] ps FWHM, respectively. Measurements of light yield and intrinsic decay time are also presented for a thorough investigation into the timing performance with LGSO:Ce (0.025 mol%).
View details for DOI 10.1088/0031-9155/61/6/2255
View details for PubMedID 26914187
-
Breast-Dedicated Radionuclide Imaging Systems.
Journal of nuclear medicine : official publication, Society of Nuclear Medicine
2016; 57: 40S-5S
Abstract
Breast-dedicated radionuclide imaging systems show promise for increasing clinical sensitivity for breast cancer while minimizing patient dose and cost. We present several breast-dedicated coincidence-photon and single-photon camera designs that have been described in the literature and examine their intrinsic performance, clinical relevance, and impact. Recent tracer development is mentioned, results from recent clinical tests are summarized, and potential areas for improvement are highlighted.
View details for DOI 10.2967/jnumed.115.157883
View details for PubMedID 26834101
-
The potential of TOF PET-MRI for reducing artifacts in PET images.
EJNMMI physics
2015; 2: A77-?
View details for DOI 10.1186/2197-7364-2-S1-A77
View details for PubMedID 26956338
View details for PubMedCentralID PMC4798707
-
Successful demonstration of simultaneous PET/MR Imaging with a RF-penetrable PET insert.
EJNMMI physics
2015; 2: A17-?
View details for DOI 10.1186/2197-7364-2-S1-A17
View details for PubMedID 26956272
View details for PubMedCentralID PMC4798708
-
Programmable High Voltage Distribution for Photodetectors in a 1 mm Resolution Clinical PET System
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2015; 62 (5): 1989-1994
View details for DOI 10.1109/TNS.2015.2440437
View details for Web of Science ID 000363242200008
-
Technical Note: Characterization of custom 3D printed multimodality imaging phantoms.
Medical physics
2015; 42 (10): 5913-?
Abstract
Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial "Micro Deluxe" phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features.CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed.Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide.This work shows that 3D printed phantoms can be functionally equivalent to commercially available phantoms. They are a viable option for quickly distributing and fabricating low cost, customized phantoms.
View details for DOI 10.1118/1.4930803
View details for PubMedID 26429265
View details for PubMedCentralID PMC4575317
-
Performance characterization of compressed sensing positron emission tomography detectors and data acquisition system.
Physics in medicine and biology
2015; 60 (16): 6407-6421
Abstract
In the field of information theory, compressed sensing (CS) had been developed to recover signals at a lower sampling rate than suggested by the Nyquist-Shannon theorem, provided the signals have a sparse representation with respect to some base. CS has recently emerged as a method to multiplex PET detector readouts thanks to the sparse nature of 511 keV photon interactions in a typical PET study. We have shown in our previous numerical studies that, at the same multiplexing ratio, CS achieves higher signal-to-noise ratio (SNR) compared to Anger and cross-strip multiplexing. In addition, unlike Anger logic, multiplexing by CS preserves the capability to resolve multi-hit events, in which multiple pixels are triggered within the resolving time of the detector. In this work, we characterized the time, energy and intrinsic spatial resolution of two CS detectors and a data acquisition system we have developed for a PET insert system for simultaneous PET/MRI. The CS detector comprises a [Formula: see text] mosaic of [Formula: see text] arrays of [Formula: see text] mm(3) lutetium-yttrium orthosilicate crystals coupled one-to-one to eight [Formula: see text] silicon photomultiplier arrays. The total number of 128 pixels is multiplexed down to 16 readout channels by CS. The energy, coincidence time and intrinsic spatial resolution achieved by two CS detectors were [Formula: see text]% FWHM at 511 keV, 4.5 ns FWHM and 2.3 mm FWHM, respectively. A series of experiments were conducted to measure the sources of time jitter that limit the time resolution of the current system, which provides guidance for potential system design improvements. These findings demonstrate the feasibility of compressed sensing as a promising multiplexing method for PET detectors.
View details for DOI 10.1088/0031-9155/60/16/6407
View details for PubMedID 26237671
-
Optical delay encoding for fast timing and detector signal multiplexing in PET
MEDICAL PHYSICS
2015; 42 (8): 4526-4535
Abstract
The large number of detector channels in modern positron emission tomography (PET) scanners poses a challenge in terms of readout electronics complexity. Multiplexing schemes are typically implemented to reduce the number of physical readout channels, but often result in performance degradation. Novel methods of multiplexing in PET must be developed to avoid this data degradation. The preservation of fast timing information is especially important for time-of-flight PET.A new multiplexing scheme based on encoding detector interaction events with a series of extremely fast overlapping optical pulses with precise delays is demonstrated in this work. Encoding events in this way potentially allows many detector channels to be simultaneously encoded onto a single optical fiber that is then read out by a single digitizer. A two channel silicon photomultiplier-based prototype utilizing this optical delay encoding technique along with dual threshold time-over-threshold is demonstrated.The optical encoding and multiplexing prototype achieves a coincidence time resolution of 160 ps full width at half maximum (FWHM) and an energy resolution of 13.1% FWHM at 511 keV with 3 × 3 × 5 mm(3) LYSO crystals. All interaction information for both detectors, including timing, energy, and channel identification, is encoded onto a single optical fiber with little degradation.Optical delay encoding and multiplexing technology could lead to time-of-flight PET scanners with fewer readout channels and simplified data acquisition systems.
View details for DOI 10.1118/1.4923176
View details for Web of Science ID 000358933000011
View details for PubMedID 26233181
View details for PubMedCentralID PMC4499043
-
Analytical calculation of the lower bound on timing resolution for PET scintillation detectors comprising high-aspect-ratio crystal elements
PHYSICS IN MEDICINE AND BIOLOGY
2015; 60 (13): 5141-5161
Abstract
Excellent timing resolution is required to enhance the signal-to-noise ratio (SNR) gain available from the incorporation of time-of-flight (ToF) information in image reconstruction for positron emission tomography (PET). As the detector's timing resolution improves, so does SNR, reconstructed image quality, and accuracy. This directly impacts the challenging detection and quantification tasks in the clinic. The recognition of these benefits has spurred efforts within the molecular imaging community to determine to what extent the timing resolution of scintillation detectors can be improved and develop near-term solutions for advancing ToF-PET. Presented in this work, is a method for calculating the Cramér-Rao lower bound (CRLB) on timing resolution for scintillation detectors with long crystal elements, where the influence of the variation in optical path length of scintillation light on achievable timing resolution is non-negligible. The presented formalism incorporates an accurate, analytical probability density function (PDF) of optical transit time within the crystal to obtain a purely mathematical expression of the CRLB with high-aspect-ratio (HAR) scintillation detectors. This approach enables the statistical limit on timing resolution performance to be analytically expressed for clinically-relevant PET scintillation detectors without requiring Monte Carlo simulation-generated photon transport time distributions. The analytically calculated optical transport PDF was compared with detailed light transport simulations, and excellent agreement was found between the two. The coincidence timing resolution (CTR) between two [Formula: see text] mm[Formula: see text] LYSO:Ce crystals coupled to analogue SiPMs was experimentally measured to be [Formula: see text] ps FWHM, approaching the analytically calculated lower bound within 6.5%.
View details for DOI 10.1088/0031-9155/60/13/5141
View details for Web of Science ID 000356872000014
View details for PubMedID 26083559
-
Shine-Through in PET/MR Imaging: Effects of the Magnetic Field on Positron Range and Subsequent Image Artifacts
JOURNAL OF NUCLEAR MEDICINE
2015; 56 (6): 951-954
Abstract
Simultaneous PET/MR imaging is an emerging hybrid modality for clinical and preclinical imaging. The static magnetic field of the MR imaging device affects the trajectory of the positrons emitted by the PET radioisotopes. This effect translates into an improvement of the spatial resolution in transaxial images. However, because of the elongation of the positron range distribution along the magnetic field, the axial resolution worsens and shine-through artifacts may appear. These artifacts can lead to misinterpretation and overstaging. The aim of this work was to study the relevance of this effect.Measurements were performed in a 3-tesla PET/MR scanner. A 1-cm(2) piece of paper, soaked with a radioisotope and placed in air, was scanned, and the magnitude of the shine-through was quantified from the PET images for various radioisotopes. Additionally, PET/MR and PET/CT images of the lungs and the larynx with trachea of a deceased swine were obtained after injecting a mixture of NiSO4 and (68)Ga to simulate hot tumor lesions.For the radioactive paper, shine-through artifacts appeared in the location of the acrylic glass backplane, located 3 cm from the source in the axial direction. The ratio between the activity of the shine-through and the activity reconstructed in the original location ranged from 0.9 ((18)F) to 5.7 ((68)Ga). For the larynx-with-trachea images, the magnitude of the artifacts depended on the organ orientation with respect to the magnetic field. The shine-through activity could reach 46% of the reconstructed activity (larynx lesion). The lesion within the trachea produced 2 artifacts, symmetrically aligned with the magnetic field and characterized by artifact-to-lesion volume-of-interest ratios ranging from 21% to 30%.In simultaneous PET/MR imaging, the effect of the magnetic field on positrons may cause severe artifacts in the PET image when the lesions are close to air cavities and high-energy radioisotopes are used. For accurate staging and interpretation, this effect needs to be recognized and adequate compensation techniques should be developed.
View details for DOI 10.2967/jnumed.114.147637
View details for PubMedID 25766897
-
Direct conversion semiconductor detectors in positron emission tomography
MODERN PHYSICS LETTERS A
2015; 30 (14)
View details for DOI 10.1142/S0217732315300116
View details for Web of Science ID 000353297400001
-
Prototype positron emission tomography insert with electro-optical signal transmission for simultaneous operation with MRI
PHYSICS IN MEDICINE AND BIOLOGY
2015; 60 (9): 3459-3478
Abstract
The simultaneous acquisition of PET and MRI data shows promise to provide powerful capabilities to study disease processes in human subjects, guide the development of novel treatments, and monitor therapy response and disease progression. A brain-size PET detector ring insert for an MRI system is being developed that, if successful, can be inserted into any existing MRI system to enable simultaneous PET and MRI images of the brain to be acquired without mutual interference. The PET insert uses electro-optical coupling to relay all the signals from the PET detectors out of the MRI system using analog modulated lasers coupled to fiber optics. Because the fibers use light instead of electrical signals, the PET detector can be electrically decoupled from the MRI making it partially transmissive to the RF field of the MRI. The SiPM devices and low power lasers were powered using non-magnetic MRI compatible batteries. Also, the number of laser-fiber channels in the system was reduced using techniques adapted from the field of compressed sensing. Using the fact that incoming PET data is sparse in time and space, electronic circuits implementing constant weight codes uniquely encode the detector signals in order to reduce the number of electro-optical readout channels by 8-fold. Two out of a total of sixteen electro-optical detector modules have been built and tested with the entire RF-shielded detector gantry for the PET ring insert. The two detectors have been tested outside and inside of a 3T MRI system to study mutual interference effects and simultaneous performance with MRI. Preliminary results show that the PET insert is feasible for high resolution simultaneous PET/MRI imaging for applications in the brain.
View details for DOI 10.1088/0031-9155/60/9/3459
View details for Web of Science ID 000354104700007
View details for PubMedID 25856511
-
Analog electro-optical readout of SiPMs achieves fast timing required for time-of-flight PET/MR
PHYSICS IN MEDICINE AND BIOLOGY
2015; 60 (9): 3795-3806
Abstract
The design of combined positron emission tomography/magnetic resonance (PET/MR) systems presents a number of challenges to engineers, as it forces the PET system to acquire data in a space constrained environment that is sensitive to electro-magnetic interference and contains high static, radio frequency and gradient fields. In this work we validate fast timing performance of a PET scintillation detector using a potentially very compact, very low power, and MR compatible readout method in which analog silicon photomultipliers (SiPM) signals are transmitted optically away from the MR bore with little or even no additional readout electronics. This analog 'electro-optial' method could reduce the entire PET readout in the MR bore to two compact, low power components (SiPMs and lasers). Our experiments show fast timing performance from analog electro-optical readout with and without pre-amplification. With 3 mm × 3 mm × 20 mm lutetium-yttrium oxyorthosilicate (LYSO) crystals and Excelitas SiPMs the best two-sided fwhm coincident timing resolution achieved was 220 +/- 3 ps in electrical mode, 230 +/- 2 ps in electro-optical with preamp mode, and 253 +/- 2 ps in electro-optical without preamp mode. Timing measurements were also performed with Hamamatsu SiPMs and 3 mm × 3 mm × 5 mm crystals. In the future the timing degradation seen can be further reduced with lower laser noise or improvements SiPM rise time or gain.
View details for DOI 10.1088/0031-9155/60/9/3795
View details for Web of Science ID 000354104700026
View details for PubMedID 25905626
View details for PubMedCentralID PMC4431650
-
Electrical delay line multiplexing for pulsed mode radiation detectors
PHYSICS IN MEDICINE AND BIOLOGY
2015; 60 (7): 2785-2802
Abstract
Medical imaging systems are composed of a large number of position sensitive radiation detectors to provide high resolution imaging. For example, whole-body Positron Emission Tomography (PET) systems are typically composed of thousands of scintillation crystal elements, which are coupled to photosensors. Thus, PET systems greatly benefit from methods to reduce the number of data acquisition channels, in order to reduce the system development cost and complexity. In this paper we present an electrical delay line multiplexing scheme that can significantly reduce the number of readout channels, while preserving the signal integrity required for good time resolution performance. We experimented with two 4 × 4 LYSO crystal arrays, with crystal elements having 3 mm × 3 mm × 5 mm and 3 mm × 3 mm × 20 mm dimensions, coupled to 16 Hamamatsu MPPC S10931-050P SiPM elements. Results show that each crystal could be accurately identified, even in the presence of scintillation light sharing and inter-crystal Compton scatter among neighboring crystal elements. The multiplexing configuration degraded the coincidence timing resolution from ∼243 ps FWHM to ∼272 ps FWHM when 16 SiPM signals were combined into a single channel for the 4 × 4 LYSO crystal array with 3 mm × 3 mm × 20 mm crystal element dimensions, in coincidence with a 3 mm × 3 mm × 5 mm LYSO crystal pixel. The method is flexible to allow multiplexing configurations across different block detectors, and is scalable to an entire ring of detectors.
View details for DOI 10.1088/0031-9155/60/7/2785
View details for Web of Science ID 000352516000013
View details for PubMedID 25768002
View details for PubMedCentralID PMC4386692
-
Simultaneous Whole-Body Time-of-Flight F-18-FDG PET/MRI A Pilot Study Comparing SUVmax With PET/CT and Assessment of MR Image Quality
CLINICAL NUCLEAR MEDICINE
2015; 14 (1): 1-8
Abstract
The recent introduction of hybrid PET/MRI scanners in clinical practice has shown promising initial results for several clinical scenarios. However, the first generation of combined PET/MRI lacks time-of-flight (TOF) technology. Here we report the results of the first patients to be scanned on a completely novel fully integrated PET/MRI scanner with TOF.We analyzed data from patients who underwent a clinically indicated F FDG PET/CT, followed by PET/MRI. Maximum standardized uptake values (SUVmax) were measured from F FDG PET/MRI and F FDG PET/CT for lesions, cerebellum, salivary glands, lungs, aortic arch, liver, spleen, skeletal muscle, and fat. Two experienced radiologists independently reviewed the MR data for image quality.Thirty-six patients (19 men, 17 women, mean [±standard deviation] age of 61 ± 14 years [range: 27-86 years]) with a total of 69 discrete lesions met the inclusion criteria. PET/CT images were acquired at a mean (±standard deviation) of 74 ± 14 minutes (range: 49-100 minutes) after injection of 10 ± 1 mCi (range: 8-12 mCi) of F FDG. PET/MRI scans started at 161 ± 29 minutes (range: 117 - 286 minutes) after the F FDG injection. All lesions identified on PET from PET/CT were also seen on PET from PET/MRI. The mean SUVmax values were higher from PET/MRI than PET/CT for all lesions. No degradation of MR image quality was observed.The data obtained so far using this investigational PET/MR system have shown that the TOF PET system is capable of excellent performance during simultaneous PET/MR with routine pulse sequences. MR imaging was not compromised. Comparison of the PET images from PET/CT and PET/MRI show no loss of image quality for the latter. These results support further investigation of this novel fully integrated TOF PET/MRI instrument.
View details for Web of Science ID 000346633400023
-
Simultaneous whole-body time-of-flight 18F-FDG PET/MRI: a pilot study comparing SUVmax with PET/CT and assessment of MR image quality.
Clinical nuclear medicine
2015; 40 (1): 1-8
Abstract
The recent introduction of hybrid PET/MRI scanners in clinical practice has shown promising initial results for several clinical scenarios. However, the first generation of combined PET/MRI lacks time-of-flight (TOF) technology. Here we report the results of the first patients to be scanned on a completely novel fully integrated PET/MRI scanner with TOF.We analyzed data from patients who underwent a clinically indicated F FDG PET/CT, followed by PET/MRI. Maximum standardized uptake values (SUVmax) were measured from F FDG PET/MRI and F FDG PET/CT for lesions, cerebellum, salivary glands, lungs, aortic arch, liver, spleen, skeletal muscle, and fat. Two experienced radiologists independently reviewed the MR data for image quality.Thirty-six patients (19 men, 17 women, mean [±standard deviation] age of 61 ± 14 years [range: 27-86 years]) with a total of 69 discrete lesions met the inclusion criteria. PET/CT images were acquired at a mean (±standard deviation) of 74 ± 14 minutes (range: 49-100 minutes) after injection of 10 ± 1 mCi (range: 8-12 mCi) of F FDG. PET/MRI scans started at 161 ± 29 minutes (range: 117 - 286 minutes) after the F FDG injection. All lesions identified on PET from PET/CT were also seen on PET from PET/MRI. The mean SUVmax values were higher from PET/MRI than PET/CT for all lesions. No degradation of MR image quality was observed.The data obtained so far using this investigational PET/MR system have shown that the TOF PET system is capable of excellent performance during simultaneous PET/MR with routine pulse sequences. MR imaging was not compromised. Comparison of the PET images from PET/CT and PET/MRI show no loss of image quality for the latter. These results support further investigation of this novel fully integrated TOF PET/MRI instrument.
View details for DOI 10.1097/RLU.0000000000000611
View details for PubMedID 25489952
-
Thermal regulation of tightly packed solid-state photodetectors in a 1 mm(3) resolution clinical PET system.
Medical physics
2015; 42 (1): 305-?
Abstract
Silicon photodetectors are of significant interest for use in positron emission tomography (PET) systems due to their compact size, insensitivity to magnetic fields, and high quantum efficiency. However, one of their main disadvantages is fluctuations in temperature cause strong shifts in gain of the devices. PET system designs with high photodetector density suffer both increased thermal density and constrained options for thermally regulating the devices. This paper proposes a method of thermally regulating densely packed silicon photodetectors in the context of a 1 mm(3) resolution, high-sensitivity PET camera dedicated to breast imaging.The PET camera under construction consists of 2304 units, each containing two 8 × 8 arrays of 1 mm(3) LYSO crystals coupled to two position sensitive avalanche photodiodes (PSAPD). A subsection of the proposed camera with 512 PSAPDs has been constructed. The proposed thermal regulation design uses water-cooled heat sinks, thermoelectric elements, and thermistors to measure and regulate the temperature of the PSAPDs in a novel manner. Active cooling elements, placed at the edge of the detector stack due to limited access, are controlled based on collective leakage current and temperature measurements in order to keep all the PSAPDs at a consistent temperature. This thermal regulation design is characterized for the temperature profile across the camera and for the time required for cooling changes to propagate across the camera. These properties guide the implementation of a software-based, cascaded proportional-integral-derivative control loop that controls the current through the Peltier elements by monitoring thermistor temperature and leakage current. The stability of leakage current, temperature within the system using this control loop is tested over a period of 14 h. The energy resolution is then measured over a period of 8.66 h. Finally, the consistency of PSAPD gain between independent operations of the camera over 10 days is tested.The PET camera maintains a temperature of 18.00 ± 0.05 °C over the course of 12 h while the ambient temperature varied 0.61 °C, from 22.83 to 23.44 °C. The 511 keV photopeak energy resolution over a period of 8.66 h is measured to be 11.3% FWHM with a maximum photopeak fluctuation of 4 keV. Between measurements of PSAPD gain separated by at least 2 day, the maximum photopeak shift was 6 keV.The proposed thermal regulation scheme for tightly packed silicon photodetectors provides for stable operation of the constructed subsection of a PET camera over long durations of time. The energy resolution of the system is not degraded despite shifts in ambient temperature and photodetector heat generation. The thermal regulation scheme also provides a consistent operating environment between separate runs of the camera over different days. Inter-run consistency allows for reuse of system calibration parameters from study to study, reducing the time required to calibrate the system and hence to obtain a reconstructed image.
View details for DOI 10.1118/1.4903889
View details for PubMedID 25563270
View details for PubMedCentralID PMC4277559
-
Side readout of long scintillation crystal elements with digital SiPM for TOF-DOI PET
MEDICAL PHYSICS
2014; 41 (12)
Abstract
Side readout of scintillation light from crystal elements in positron emission tomography (PET) is an alternative to conventional end-readout configurations, with the benefit of being able to provide accurate depth-of-interaction (DOI) information and good energy resolution while achieving excellent timing resolution required for time-of-flight PET. This paper explores different readout geometries of scintillation crystal elements with the goal of achieving a detector that simultaneously achieves excellent timing resolution, energy resolution, spatial resolution, and photon sensitivity.The performance of discrete LYSO scintillation elements of different lengths read out from the end/side with digital silicon photomultipliers (dSiPMs) has been assessed.Compared to 3 × 3 × 20 mm(3) LYSO crystals read out from their ends with a coincidence resolving time (CRT) of 162 ± 6 ps FWHM and saturated energy spectra, a side-readout configuration achieved an excellent CRT of 144 ± 2 ps FWHM after correcting for timing skews within the dSiPM and an energy resolution of 11.8% ± 0.2% without requiring energy saturation correction. Using a maximum likelihood estimation method on individual dSiPM pixel response that corresponds to different 511 keV photon interaction positions, the DOI resolution of this 3 × 3 × 20 mm(3) crystal side-readout configuration was computed to be 0.8 mm FWHM with negligible artifacts at the crystal ends. On the other hand, with smaller 3 × 3 × 5 mm(3) LYSO crystals that can also be tiled/stacked to provide DOI information, a timing resolution of 134 ± 6 ps was attained but produced highly saturated energy spectra.The energy, timing, and DOI resolution information extracted from the side of long scintillation crystal elements coupled to dSiPM have been acquired for the first time. The authors conclude in this proof of concept study that such detector configuration has the potential to enable outstanding detector performance in terms of timing, energy, and DOI resolution.
View details for DOI 10.1118/1.4901524
View details for Web of Science ID 000346176300035
View details for PubMedID 25471979
View details for PubMedCentralID PMC4247369
-
The lower timing resolution bound for scintillators with non-negligible optical photon transport time in time-of-flight PET
PHYSICS IN MEDICINE AND BIOLOGY
2014; 59 (20): 6215-6229
View details for DOI 10.1088/0031-9155/59/20/6215
View details for Web of Science ID 000343092300016
-
The lower timing resolution bound for scintillators with non-negligible optical photon transport time in time-of-flight PET.
Physics in medicine and biology
2014; 59 (20): 6215-6229
Abstract
In this work, a method is presented that can calculate the lower bound of the timing resolution for large scintillation crystals with non-negligible photon transport. Hereby, the timing resolution bound can directly be calculated from Monte Carlo generated arrival times of the scintillation photons. This method extends timing resolution bound calculations based on analytical equations, as crystal geometries can be evaluated that do not have closed form solutions of arrival time distributions. The timing resolution bounds are calculated for an exemplary 3 mm × 3 mm × 20 mm LYSO crystal geometry, with scintillation centers exponentially spread along the crystal length as well as with scintillation centers at fixed distances from the photosensor. Pulse shape simulations further show that analog photosensors intrinsically operate near the timing resolution bound, which can be attributed to the finite single photoelectron pulse rise time.
View details for DOI 10.1088/0031-9155/59/20/6215
View details for PubMedID 25255807
View details for PubMedCentralID PMC4216231
-
Thermal regulation for APDs in a 1 mm(3) resolution clinical PET camera: design, simulation and experimental verification
PHYSICS IN MEDICINE AND BIOLOGY
2014; 59 (14): 3951-3967
View details for DOI 10.1088/0031-9155/59/14/3951
View details for Web of Science ID 000338771300018
-
Thermal regulation for APDs in a 1?mm(3) resolution clinical PET camera: design, simulation and experimental verification.
Physics in medicine and biology
2014; 59 (14): 3951-3967
Abstract
We are developing a 1 mm(3) resolution positron emission tomography camera dedicated to breast imaging. The camera collects high energy photons emitted from radioactively labeled agents introduced in the patients in order to detect molecular signatures of breast cancer. The camera comprises many layers of lutetium yttrium oxyorthosilicate (LYSO) scintillation crystals coupled to position sensitive avalanche photodiodes (PSAPDs). The main objectives of the studies presented in this paper are to investigate the temperature profile of the layers of LYSO-PSAPD detectors (a.k.a. 'fins') residing in the camera and to use these results to present the design of the thermal regulation system for the front end of the camera. The study was performed using both experimental methods and simulation. We investigated a design with a heat-dissipating fin. Three fin configurations are tested: fin with Al windows (FwW), fin without Al windows (FwoW) and fin with alumina windows (FwAW). A Fluent® simulation was conducted to study the experimentally inaccessible temperature of the PSAPDs. For the best configuration (FwW), the temperature difference from the center to a point near the edge is 1.0 K when 1.5 A current was applied to the Peltier elements. Those of FwoW and FwAW are 2.6 K and 1.7 K, respectively. We conclude that the design of a heat-dissipating fin configuration with 'aluminum windows' (FwW) that borders the scintillation crystal arrays of 16 adjacent detector modules has better heat dissipation capabilities than the design without 'aluminum windows' (FwoW) and the design with 'alumina windows' (FwAW), respectively.
View details for DOI 10.1088/0031-9155/59/14/3951
View details for PubMedID 24971652
-
A new dual threshold time-over-threshold circuit for fast timing in PET
PHYSICS IN MEDICINE AND BIOLOGY
2014; 59 (13): 3421-3430
Abstract
Time-over-threshold (ToT) is attractive as a method of combined timing and energy encoding in positron emission tomography (PET) due to its simplicity in implementation and readout. However, conventional single threshold ToT has a nonlinear response and generally suffers from a tradeoff between timing and energy resolution. The resulting poor performance is not fit for applications requiring fast timing, such as time-of-flight (ToF) PET. In this work it is shown experimentally that by replacing single threshold ToT with a dual threshold method in a new compact circuit, excellent time resolution can be achieved (154 ps FWHM for 3 × 3 × 5 mm(3) LYSO crystals), suitable for ToF. Dual threshold ToT timing results have been compared to a similar single threshold design, demonstrating that dual threshold ToT performance is far superior to that of single threshold ToT (154 ps versus 418 ps coincidence time resolution for the dual and single threshold cases, respectively). A method of correcting for nonlinearity in dual threshold ToT energy spectra is also demonstrated.
View details for DOI 10.1088/0031-9155/59/13/3421
View details for Web of Science ID 000338424800014
View details for PubMedID 24889105
-
Analog electro-optical readout of SiPMs for compact, low power ToF PET/MRI.
EJNMMI physics
2014; 1: A12-?
View details for DOI 10.1186/2197-7364-1-S1-A12
View details for PubMedID 26501597
View details for PubMedCentralID PMC4545846
-
Performance of a high sensitivity time-of-flight PET ring operating simultaneously within a 3T MR system.
EJNMMI physics
2014; 1: A72-?
View details for DOI 10.1186/2197-7364-1-S1-A72
View details for PubMedID 26501663
View details for PubMedCentralID PMC4545961
-
RF-Penetrable PET insert for simultaneous PET/MR imaging.
EJNMMI physics
2014; 1: A5-?
View details for DOI 10.1186/2197-7364-1-S1-A5
View details for PubMedID 26501638
View details for PubMedCentralID PMC4545802
-
A method to achieve spatial linearity and uniform resolution at the edges of monolithic scintillation crystal detectors
PHYSICS IN MEDICINE AND BIOLOGY
2014; 59 (12): 2975-2995
Abstract
We have performed Monte Carlo simulations of the scintillation light transport between adjacent monolithic LYSO crystals that are optically coupled together using coupling media of varying refractive index. The scintillation light from the crystals was read out by SiPM arrays from the large crystal face. Scintillation event positioning results show that this optical coupling technique preserves the shape of the light spread function near and across the interface between the two crystals in order to substantially reduce the edge-artifacts observed in monolithic scintillation crystals, while not degrading the timing performance.
View details for DOI 10.1088/0031-9155/59/12/2975
View details for Web of Science ID 000337176600008
View details for PubMedID 24841984
-
Study of electrode pattern design for a CZT-based PET detector
PHYSICS IN MEDICINE AND BIOLOGY
2014; 59 (11): 2599-2621
Abstract
We are developing a 1 mm resolution small animal positron emission tomography (PET) system using 3D positioning cadmium zinc telluride photon detectors comprising 40 mm × 40 mm × 5 mm crystals metalized with a cross-strip electrode pattern with a 1 mm anode strip pitch. We optimized the electrode pattern design for intrinsic sensitivity and spatial, energy and time resolution performance using a test detector comprising cathode and steering electrode strips of varying dimensions. The study found 3 and 5 mm width cathode strips locate charge-shared photon interactions near cathode strip boundaries with equal precision. 3 mm width cathode strips exhibited large time resolution variability as a function of photon interaction location between the anode and cathode planes (~26 to ~127.5 ns full width at half maximum (FWHM) for 0.5 mm and 4.2 mm depths, respectively). 5 mm width cathode strips by contrast exhibited more stable time resolution for the same interaction locations (~34 to ~83 ns FWHM), provided more linear spatial positioning in the direction orthogonal to the electrode planes, and as much as 68.4% improvement in photon sensitivity over the 3 mm wide cathode strips. The results were understood by analyzing the cathode strips' weighting functions, which indicated a stronger 'small pixel' effect in the 3 mm wide cathode strips. Photon sensitivity and anode energy resolution were seen to improve with decreasing steering electrode bias from 0 to -80 V w.r.t. the anode potential. A slight improvement in energy resolution was seen for wider steering electrode strips (400 versus 100 µm) for charge-shared photon interactions. Although this study successfully focused on electrode pattern features for PET performance, the results are generally applicable to semiconductor photon detectors employing cross-trip electrode patterns.
View details for DOI 10.1088/0031-9155/59/11/2599
View details for Web of Science ID 000336459000005
View details for PubMedID 24786208
View details for PubMedCentralID PMC4065862
-
Clinical evaluation of a novel intraoperative handheld gamma camera for sentinel lymph node biopsy.
Physica medica
2014; 30 (3): 340-345
Abstract
Preoperative lymphoscintigraphy (PLS) combined with intraoperative gamma probe (GP) localization is standard procedure for localizing the sentinel lymph nodes (SLN) in melanoma and breast cancer. In this study, we evaluated the ability of a novel intraoperative handheld gamma camera (IHGC) to image SLNs during surgery.The IHGC is a small-field-of-view camera optimized for real-time imaging of lymphatic drainage patterns. Unlike conventional cameras, the IHGC can acquire useful images in a few seconds in a free-running fashion and be moved manually around the patient to find a suitable view of the node. Thirty-nine melanoma and eleven breast cancer patients underwent a modified SLN biopsy protocol in which nodes localized with the GP were imaged with the IHGC. The IHGC was also used to localize additional nodes that could not be found with the GP.The removal of 104 radioactive SLNs was confirmed ex vivo by GP counting. In vivo, the relative node detection sensitivity was 88.5 (82.3, 94.6)% for the IHGC (used in conjunction with the GP) and 94.2 (89.7, 98.7)% for the GP alone, a difference not found to be statistically significant (McNemar test, p = 0.24).Small radioactive SLNs can be visualized intraoperatively using the IHGC with exposure time of 20 s or less, with no significant difference in node detection sensitivity compared to a GP. The IHGC is a useful complement to the GP, especially for SLNs that are difficult to locate with the GP alone.
View details for DOI 10.1016/j.ejmp.2013.10.005
View details for PubMedID 24239343
-
Development of an Ultrahigh Resolution Block Detector Based on 0.4 mm Pixel Ce:GAGG Scintillators and a Silicon Photomultiplier Array
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2013; 60 (6): 4582-4587
View details for DOI 10.1109/TNS.2013.2282294
View details for Web of Science ID 000328971500001
-
Readout strategy of an electro-optical coupled PET detector for time-of-flight PET/MRI
PHYSICS IN MEDICINE AND BIOLOGY
2013; 58 (20): 7227-7238
Abstract
Combining PET with MRI in a single system provides clinicians with complementary molecular and anatomical information. However, existing integrated PET/MRI systems do not have time-of-flight (ToF) PET capabilities. This work describes an MRI-compatible front-end electronic system with ToF capabilities. The approach employs a fast arrival-time pickoff comparator to digitize the timing information, and a laser diode to drive a 10 m fiber-optic cable to optically transmit asynchronous timing information to a photodiode receiver readout system. The FWHM jitter of the comparator and this electo-optical link is 11.5 ps in response to a fast digital pulse. When configured with LYSO scintillation crystals and Hamamatsu MPPC silicon photo-multipliers the comparator and electro-optical link achieved a 511 keV coincidence time resolution of 254.7 ps +/- 8.0 ps FWHM with 3 × 3 × 20 mm(3) crystals and 166.5 +/- 2.5 ps FWHM with 3 × 3 × 5 mm(3) crystals.
View details for DOI 10.1088/0031-9155/58/20/7227
View details for Web of Science ID 000325172500013
View details for PubMedID 24061218
-
Readout strategy of an electro-optical coupled PET detector for time-of-flight PET/MRI.
Physics in medicine and biology
2013; 58 (20): 7227-7238
Abstract
Combining PET with MRI in a single system provides clinicians with complementary molecular and anatomical information. However, existing integrated PET/MRI systems do not have time-of-flight (ToF) PET capabilities. This work describes an MRI-compatible front-end electronic system with ToF capabilities. The approach employs a fast arrival-time pickoff comparator to digitize the timing information, and a laser diode to drive a 10 m fiber-optic cable to optically transmit asynchronous timing information to a photodiode receiver readout system. The FWHM jitter of the comparator and this electo-optical link is 11.5 ps in response to a fast digital pulse. When configured with LYSO scintillation crystals and Hamamatsu MPPC silicon photo-multipliers the comparator and electro-optical link achieved a 511 keV coincidence time resolution of 254.7 ps +/- 8.0 ps FWHM with 3 × 3 × 20 mm(3) crystals and 166.5 +/- 2.5 ps FWHM with 3 × 3 × 5 mm(3) crystals.
View details for DOI 10.1088/0031-9155/58/20/7227
View details for PubMedID 24061218
-
Cross-Strip Multiplexed Electro-Optical Coupled Scintillation Detector for Integrated PET/MRI
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2013; 60 (5): 3198-3204
View details for DOI 10.1109/TNS.2013.2271916
View details for Web of Science ID 000325827200005
-
Readout Electronics and Data Acquisition of a Positron Emission Tomography Time-of-Flight Detector Module With Waveform Digitizer
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2013; 60 (5): 3735-3741
View details for DOI 10.1109/TNS.2013.2264947
View details for Web of Science ID 000325827700049
-
Trends of Data Path Topologies for Data Acquisition Systems in Positron Emission Tomography
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2013; 60 (5): 3746-3757
View details for DOI 10.1109/TNS.2013.2281419
View details for Web of Science ID 000325827700051
-
Compact pulse width modulation circuitry for silicon photomultiplier readout.
Physics in medicine and biology
2013; 58 (15): 5049-5059
Abstract
The adoption of solid-state photodetectors for positron emission tomography (PET) system design and the interest in 3D interaction information from PET detectors has lead to an increasing number of readout channels in PET systems. To handle these additional readout channels, PET readout electronics should be simplified to reduce the power consumption, cost, and size of the electronics for a single channel. Pulse-width modulation (PWM), where detector pulses are converted to digital pulses with width proportional to the detected photon energy, promises to simplify PET readout by converting the signals to digital form at the beginning of the processing chain, and allowing a single time-to-digital converter to perform the data acquisition for many channels rather than routing many analogue channels and digitizing in the back end. Integrator based PWM systems, also known as charge-to-time converters (QTCs), are especially compact, reducing the front-end electronics to an op-amp integrator with a resistor discharge, and a comparator. QTCs, however, have a long dead-time during which dark count noise is integrated, reducing the output signal-to-noise ratio. This work presents a QTC based PWM circuit with a gated integrator that shows performance improvements over existing QTC based PWM. By opening and closing an analogue switch on the input of the integrator, the circuit can be controlled to integrate only the portions of the signal with a high signal-to-noise ratio. It also allows for multiplexing different detectors into the same PWM circuit while avoiding uncorrelated noise propagation between photodetector channels. Four gated integrator PWM circuits were built to readout the spatial channels of two position sensitive solid-state photomultiplier (PS-SSPM). Results show a 4 × 4 array 0.9 mm × 0.9 mm × 15 mm of LYSO crystals being identified on the 5 mm × 5 mm PS-SSPM at room temperature with no degradation for twofold multiplexing. In principle, much larger multiplexing ratios are possible, limited only by count rate issues.
View details for DOI 10.1088/0031-9155/58/15/5049
View details for PubMedID 23831601
-
Compact pulse width modulation circuitry for silicon photomultiplier readout
PHYSICS IN MEDICINE AND BIOLOGY
2013; 58 (15)
View details for DOI 10.1088/0031-9155/58/15/5049
View details for Web of Science ID 000322028000006
View details for PubMedID 23831601
-
Single-photon sampling architecture for solid-state imaging sensors
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
2013; 110 (30): E2752-E2761
Abstract
Advances in solid-state technology have enabled the development of silicon photomultiplier sensor arrays capable of sensing individual photons. Combined with high-frequency time-to-digital converters (TDCs), this technology opens up the prospect of sensors capable of recording with high accuracy both the time and location of each detected photon. Such a capability could lead to significant improvements in imaging accuracy, especially for applications operating with low photon fluxes such as light detection and ranging and positron-emission tomography. The demands placed on on-chip readout circuitry impose stringent trade-offs between fill factor and spatiotemporal resolution, causing many contemporary designs to severely underuse the technology's full potential. Concentrating on the low photon flux setting, this paper leverages results from group testing and proposes an architecture for a highly efficient readout of pixels using only a small number of TDCs. We provide optimized design instances for various sensor parameters and compute explicit upper and lower bounds on the number of TDCs required to uniquely decode a given maximum number of simultaneous photon arrivals. To illustrate the strength of the proposed architecture, we note a typical digitization of a 60 × 60 photodiode sensor using only 142 TDCs. The design guarantees registration and unique recovery of up to four simultaneous photon arrivals using a fast decoding algorithm. By contrast, a cross-strip design requires 120 TDCs and cannot uniquely decode any simultaneous photon arrivals. Among other realistic simulations of scintillation events in clinical positron-emission tomography, the above design is shown to recover the spatiotemporal location of 99.98% of all detected photons.
View details for DOI 10.1073/pnas.1216318110
View details for Web of Science ID 000322112300005
View details for PubMedID 23836643
-
Fast Timing Silicon Photomultipliers for Scintillation Detectors
IEEE PHOTONICS TECHNOLOGY LETTERS
2013; 25 (14): 1309-1312
View details for DOI 10.1109/LPT.2013.2264049
View details for Web of Science ID 000321151600003
-
Sparse Signal Recovery Methods for Multiplexing PET Detector Readout
IEEE TRANSACTIONS ON MEDICAL IMAGING
2013; 32 (5): 932-942
Abstract
Nuclear medicine imaging detectors are commonly multiplexed to reduce the number of readout channels. Because the underlying detector signals have a sparse representation, sparse recovery methods such as compressed sensing may be used to develop new multiplexing schemes. Random methods may be used to create sensing matrices that satisfy the restricted isometry property. However, the restricted isometry property provides little guidance for developing multiplexing networks with good signal-to-noise recovery capability. In this work, we describe compressed sensing using a maximum likelihood framework and develop a new method for constructing multiplexing (sensing) matrices that can recover signals more accurately in a mean square error sense compared to sensing matrices constructed by random construction methods. Signals can then be recovered by maximum likelihood estimation constrained to the support recovered by either greedy l₀ iterative algorithms or l₁-norm minimization techniques. We show that this new method for constructing and decoding sensing matrices recovers signals with 4%-110% higher SNR than random Gaussian sensing matrices, up to 100% higher SNR than partial DCT sensing matrices 50%-2400% higher SNR than cross-strip multiplexing, and 22%-210% higher SNR than Anger multiplexing for photoelectric events.
View details for DOI 10.1109/TMI.2013.2246182
View details for Web of Science ID 000318643500009
View details for PubMedID 23475349
-
Distributed MLEM: An Iterative Tomographic Image Reconstruction Algorithm for Distributed Memory Architectures
IEEE TRANSACTIONS ON MEDICAL IMAGING
2013; 32 (5): 957-967
Abstract
The processing speed for positron emission tomography (PET) image reconstruction has been greatly improved in recent years by simply dividing the workload to multiple processors of a graphics processing unit (GPU). However, if this strategy is generalized to a multi-GPU cluster, the processing speed does not improve linearly with the number of GPUs. This is because large data transfer is required between the GPUs after each iteration, effectively reducing the parallelism. This paper proposes a novel approach to reformulate the maximum likelihood expectation maximization (MLEM) algorithm so that it can scale up to many GPU nodes with less frequent inter-node communication. While being mathematically different, the new algorithm maximizes the same convex likelihood function as MLEM, thus converges to the same solution. Experiments on a multi-GPU cluster demonstrate the effectiveness of the proposed approach.
View details for DOI 10.1109/TMI.2013.2252913
View details for Web of Science ID 000318643500011
View details for PubMedID 23529079
-
First Performance Results of Ce:GAGG Scintillation Crystals With Silicon Photomultipliers
Symposium on Radiation Measurements and Applications (SORMA)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 2013: 988–92
View details for DOI 10.1109/TNS.2012.2233497
View details for Web of Science ID 000320856500088
-
Optimizing timing performance of silicon photomultiplier-based scintillation detectors
PHYSICS IN MEDICINE AND BIOLOGY
2013; 58 (4): 1207-1220
Abstract
Precise timing resolution is crucial for applications requiring photon time-of-flight (ToF) information such as ToF positron emission tomography (PET). Silicon photomultipliers (SiPM) for PET, with their high output capacitance, are known to require custom preamplifiers to optimize timing performance. In this paper, we describe simple alternative front-end electronics based on a commercial low-noise RF preamplifier and methods that have been implemented to achieve excellent timing resolution. Two radiation detectors with L(Y)SO scintillators coupled to Hamamatsu SiPMs (MPPC S10362-33-050C) and front-end electronics based on an RF amplifier (MAR-3SM+), typically used for wireless applications that require minimal additional circuitry, have been fabricated. These detectors were used to detect annihilation photons from a Ge-68 source and the output signals were subsequently digitized by a high speed oscilloscope for offline processing. A coincident resolving time (CRT) of 147 ± 3 ps FWHM and 186 ± 3 ps FWHM with 3 × 3 × 5 mm(3) and with 3 × 3 × 20 mm(3) LYSO crystal elements were measured, respectively. With smaller 2 × 2 × 3 mm(3) LSO crystals, a CRT of 125 ± 2 ps FWHM was achieved with slight improvement to 121 ± 3 ps at a lower temperature (15° C). Finally, with the 20 mm length crystals, a degradation of timing resolution was observed for annihilation photon interactions that occur close to the photosensor compared to shallow depth-of-interaction (DOI). We conclude that commercial RF amplifiers optimized for noise, besides their ease of use, can produce excellent timing resolution comparable to best reported values acquired with custom readout electronics. On the other hand, as timing performance degrades with increasing photon DOI, a head-on detector configuration will produce better CRT than a side-irradiated setup for longer crystals.
View details for DOI 10.1088/0031-9155/58/4/1207
View details for Web of Science ID 000314396800029
View details for PubMedID 23369872
View details for PubMedCentralID PMC3675904
-
In situ study of the impact of inter- and intra-reader variability on region of interest (ROI) analysis in preclinical molecular imaging.
American journal of nuclear medicine and molecular imaging
2013; 3 (2): 175-181
Abstract
We estimated reader-dependent variability of region of interest (ROI) analysis and evaluated its impact on preclinical quantitative molecular imaging. To estimate reader variability, we used five independent image datasets acquired each using microPET and multispectral fluorescence imaging (MSFI). We also selected ten experienced researchers who utilize molecular imaging in the same environment that they typically perform their own studies. Nine investigators blinded to the data type completed the ROI analysis by drawing ROIs manually that delineate the tumor regions to the best of their knowledge and repeated the measurements three times, non-consecutively. Extracted mean intensities of voxels within each ROI are used to compute the coefficient of variation (CV) and characterize the inter- and intra-reader variability. The impact of variability was assessed through random samples iterated from normal distributions for control and experimental groups on hypothesis testing and computing statistical power by varying subject size, measured difference between groups and CV. The results indicate that inter-reader variability was 22.5% for microPET and 72.2% for MSFI. Additionally, mean intra-reader variability was 10.1% for microPET and 26.4% for MSFI. Repeated statistical testing showed that a total variability of CV < 50% may be needed to detect differences < 50% between experimental and control groups when six subjects (n = 6) or more are used and statistical power is adequate (80%). Surprisingly high variability has been observed mainly due to differences in the ROI placement and geometry drawn between readers, which may adversely affect statistical power and erroneously lead to negative study outcomes.
View details for PubMedID 23526701
-
An MLEM Method for Joint Tissue Activity Distribution and Photon Attenuation Map Reconstruction in PET
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500025
-
A 16-Channel FPGA-Based Time-to-Digital Converter for Pulse Width Modulation Circuitry for Silicon Photomultiplier Readout
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501012
-
Novel Photon-Counting Energy-Resolving Ultra-Fast X-Ray Detector
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500013
-
Scintillation Crystal Side-Readout with SiPMs for Improved Time Resolution
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500070
-
Optical Encoding and Multiplexing of Detector Signals with Dual Threshold Time-over-Threshold
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501008
-
Studies of Electromagnetic Interference of PET Detector Insert for Simultaneous PET/MRI
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500037
-
Electrical delay line multiplexing for pulsed mode radiation detectors
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500008
-
First measurements of a 512 PSAPD prototype of a sub-mm resolution clinical PET camera
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501220
-
Characterization of PET Data Acquisition System with Compressed Sensing Detectors
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501024
-
A Pulse Width Modulation Readout Method for Densely Packed Solid State Photodetectors
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501009
-
Analyzing the Stability of 256 APDs Through Leakage Current and Temperature Monitoring in a 1 mm(3) Resolution Clinical PET System
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500072
-
Comparison of End/Side Scintillator Readout with Digital-SiPM for ToF PET
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501136
-
General spatial distortion correction method for solid-state position sensitive detectors in PET
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163500021
-
3D Printing for Cost-Effective, Customized, Reusable Multi-Modality Imaging Phantoms
60th IEEE Nuclear Science Symposium (NSS) / Medical Imaging Conference (MIC) / 20th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2013
View details for Web of Science ID 000347163501001
-
Signal Conditioning Technique for Position Sensitive Photodetectors to Manipulate Pixelated Crystal Identification Capabilities
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2012; 59 (5): 1815-1822
View details for DOI 10.1109/TNS.2012.2209893
View details for Web of Science ID 000310142800005
-
Influence of temperature and bias voltage on the performance of a high resolution PET detector built with position sensitive avalanche photodiodes
JOURNAL OF INSTRUMENTATION
2012; 7
View details for DOI 10.1088/1748-0221/7/08/P08001
View details for Web of Science ID 000308869800012
-
Study of PET intrinsic spatial resolution and contrast recovery improvement for PET/MRI systems
PHYSICS IN MEDICINE AND BIOLOGY
2012; 57 (9)
Abstract
This paper studied PET intrinsic spatial resolution and contrast recovery improvement for PET/MRI dual modality systems. A Monte Carlo simulation tool was developed to study positron diffusion in tissues with and without a magnetic field for six commonly used isotopes ((18)F, (11)C, (13)N, (15)O, (68)Ga and (82)Rb). A convolution process was implemented to investigate PET intrinsic spatial resolution, taking into account three factors: positron diffusion range, collinear photon annihilation and finite detector element width. The resolution improvement was studied quantitatively as a function of magnetic field strength for three PET system configurations (whole-body, brain-dedicated and small-animal PET). When the magnetic field strength increases up to 10 T, the system spatial resolution in directions orthogonal to the field for (15)O, (68)Ga and (82)Rb is comparable to that of (18)F without the magnetic field. Beyond 10 T, no significant improvement of spatial resolution was observed. In addition, the modulation transfer function was studied to predict the intrinsic contrast recovery improvement for several existing and promising PET/MRI configurations.
View details for DOI 10.1088/0031-9155/57/9/N101
View details for Web of Science ID 000303046200001
View details for PubMedID 22481596
-
Promising New Photon Detection Concepts for High-Resolution Clinical and Preclinical PET
JOURNAL OF NUCLEAR MEDICINE
2012; 53 (2): 167-170
Abstract
The ability of PET to visualize and quantify regions of low concentration of PET tracer representing subtle cellular and molecular signatures of disease depends on relatively complex biochemical, biologic, and physiologic factors that are challenging to control, as well as on instrumentation performance parameters that are, in principle, still possible to improve on. Thus, advances to the latter can somewhat offset barriers of the former. PET system performance parameters such as spatial resolution, contrast resolution, and photon sensitivity contribute significantly to PET's ability to visualize and quantify lower concentrations of signal in the presence of background. In this report we present some technology innovations under investigation toward improving these PET system performance parameters. We focus particularly on a promising advance known as 3-dimensional position-sensitive detectors, which are detectors capable of distinguishing and measuring the position, energy, and arrival time of individual interactions of multi-interaction photon events in 3 dimensions. If successful, these new strategies enable enhancements such as the detection of fewer diseased cells in tissue or the ability to characterize lower-abundance molecular targets within cells. Translating these advanced capabilities to the clinic might allow expansion of PET's roles in disease management, perhaps to earlier stages of disease. In preclinical research, such enhancements enable more sensitive and accurate studies of disease biology in living subjects.
View details for DOI 10.2967/jnumed.110.084343
View details for Web of Science ID 000300032800006
View details for PubMedID 22302960
-
Readout Electronics and Data Acquisition of a Time of Flight Detector for Positron Emission Tomography
18th IEEE-NPSS Real Time Conference (RT)
IEEE. 2012
View details for Web of Science ID 000316572100054
-
Characterization of Detector Layers from a 1 mm(3) Resolution Clinical PET System
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 3804–3807
View details for Web of Science ID 000326814203210
-
Performance of Fast Timing Silicon Photomultipliers for Scintillation Detectors
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2845–2847
View details for Web of Science ID 000326814202209
-
Characterization of Inter-detector Effects in a 3-D Position-Sensitive Dual-CZT Detector Modules for PET
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 4088–4090
View details for Web of Science ID 000326814204038
-
Optimizing Timing Performance of Silicon Photomultiplier Based Scintillation Detectors
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 3119–3121
View details for Web of Science ID 000326814203048
-
Timing Performance Comparison of P-on-N and N-on-P Silicon Photomultipliers
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2128–2130
View details for Web of Science ID 000326814202047
-
Improved Compressed Sensing Multiplexing for PET Detector Readout
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2472–2474
View details for Web of Science ID 000326814202123
-
PET DAQ System for Compressed Sensing Detector Modules
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2798–2801
View details for Web of Science ID 000326814202198
-
FPGA-based Time-to-Digital Converter for Time-of-Flight PET Detector
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2463–2465
View details for Web of Science ID 000326814202120
-
Design and Implementation of Scalable DAQ Software for a High-Resolution PET Camera
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2537–2539
View details for Web of Science ID 000326814202139
-
A cost-effective modular programmable HV distribution system for photodetectors
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 3504–3506
View details for Web of Science ID 000326814203137
-
A Method to Achieve Spatial Linearity and Uniform Resolution at the Edges of Monolithic Scintillation Crystal Detectors for PET
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 2270–2273
View details for Web of Science ID 000326814202075
-
Strategies to Achieve More Compact Pulse Width Modulation Circuitry for Silicon Photomultiplier Readout
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 3812–3814
View details for Web of Science ID 000326814203212
-
The Trend of Data Path Structures for Data Acquisition Systems in Positron Emission Tomography
18th IEEE-NPSS Real Time Conference (RT)
IEEE. 2012
View details for Web of Science ID 000316572100091
-
GPU-Enabled PET Motion Compensation Using Sparse and Low-Rank Decomposition
IEEE Nuclear Science Symposium / Medical Imaging Conference Record (NSS/MIC) / 19th Room-Temperature Semiconductor X-ray and Gamma-ray Detector Workshop
IEEE. 2012: 3367–3370
View details for Web of Science ID 000326814203104
-
Fully 3D list-mode time-of-flight PET image reconstruction on GPUs using CUDA
MEDICAL PHYSICS
2011; 38 (12): 6775-6786
Abstract
List-mode processing is an efficient way of dealing with the sparse nature of positron emission tomography (PET) data sets and is the processing method of choice for time-of-flight (ToF) PET image reconstruction. However, the massive amount of computation involved in forward projection and backprojection limits the application of list-mode reconstruction in practice, and makes it challenging to incorporate accurate system modeling.The authors present a novel formulation for computing line projection operations on graphics processing units (GPUs) using the compute unified device architecture (CUDA) framework, and apply the formulation to list-mode ordered-subsets expectation maximization (OSEM) image reconstruction. Our method overcomes well-known GPU challenges such as divergence of compute threads, limited bandwidth of global memory, and limited size of shared memory, while exploiting GPU capabilities such as fast access to shared memory and efficient linear interpolation of texture memory. Execution time comparison and image quality analysis of the GPU-CUDA method and the central processing unit (CPU) method are performed on several data sets acquired on a preclinical scanner and a clinical ToF scanner.When applied to line projection operations for non-ToF list-mode PET, this new GPU-CUDA method is >200 times faster than a single-threaded reference CPU implementation. For ToF reconstruction, we exploit a ToF-specific optimization to improve the efficiency of our parallel processing method, resulting in GPU reconstruction >300 times faster than the CPU counterpart. For a typical whole-body scan with 75 × 75 × 26 image matrix, 40.7 million LORs, 33 subsets, and 3 iterations, the overall processing time is 7.7 s for GPU and 42 min for a single-threaded CPU. Image quality and accuracy are preserved for multiple imaging configurations and reconstruction parameters, with normalized root mean squared (RMS) deviation less than 1% between CPU and GPU-generated images for all cases.A list-mode ToF OSEM library was developed on the GPU-CUDA platform. Our studies show that the GPU reformulation is considerably faster than a single-threaded reference CPU method especially for ToF processing, while producing virtually identical images. This new method can be easily adapted to enable more advanced algorithms for high resolution PET reconstruction based on additional information such as depth of interaction (DoI), photon energy, and point spread functions (PSFs).
View details for DOI 10.1118/1.3661998
View details for Web of Science ID 000298250100045
View details for PubMedID 22149859
-
Online detector response calculations for high-resolution PET image reconstruction
PHYSICS IN MEDICINE AND BIOLOGY
2011; 56 (13): 4023-4040
Abstract
Positron emission tomography systems are best described by a linear shift-varying model. However, image reconstruction often assumes simplified shift-invariant models to the detriment of image quality and quantitative accuracy. We investigated a shift-varying model of the geometrical system response based on an analytical formulation. The model was incorporated within a list-mode, fully 3D iterative reconstruction process in which the system response coefficients are calculated online on a graphics processing unit (GPU). The implementation requires less than 512 Mb of GPU memory and can process two million events per minute (forward and backprojection). For small detector volume elements, the analytical model compared well to reference calculations. Images reconstructed with the shift-varying model achieved higher quality and quantitative accuracy than those that used a simpler shift-invariant model. For an 8 mm sphere in a warm background, the contrast recovery was 95.8% for the shift-varying model versus 85.9% for the shift-invariant model. In addition, the spatial resolution was more uniform across the field-of-view: for an array of 1.75 mm hot spheres in air, the variation in reconstructed sphere size was 0.5 mm RMS for the shift-invariant model, compared to 0.07 mm RMS for the shift-varying model.
View details for DOI 10.1088/0031-9155/56/13/018
View details for Web of Science ID 000291866800020
View details for PubMedID 21677367
View details for PubMedCentralID PMC3147176
-
A Maximum NEC Criterion for Compton Collimation to Accurately Identify True Coincidences in PET
IEEE TRANSACTIONS ON MEDICAL IMAGING
2011; 30 (7): 1341-1352
Abstract
In this work, we propose a new method to increase the accuracy of identifying true coincidence events for positron emission tomography (PET). This approach requires 3-D detectors with the ability to position each photon interaction in multi-interaction photon events. When multiple interactions occur in the detector, the incident direction of the photon can be estimated using the Compton scatter kinematics (Compton Collimation). If the difference between the estimated incident direction of the photon relative to a second, coincident photon lies within a certain angular range around colinearity, the line of response between the two photons is identified as a true coincidence and used for image reconstruction. We present an algorithm for choosing the incident photon direction window threshold that maximizes the noise equivalent counts of the PET system. For simulated data, the direction window removed 56%-67% of random coincidences while retaining > 94% of true coincidences from image reconstruction as well as accurately extracted 70% of true coincidences from multiple coincidences.
View details for DOI 10.1109/TMI.2011.2113379
View details for Web of Science ID 000292164900004
View details for PubMedID 21317079
View details for PubMedCentralID PMC3667991
-
Investigation of a clinical PET detector module design that employs large-area avalanche photodetectors
PHYSICS IN MEDICINE AND BIOLOGY
2011; 56 (12): 3603-3627
Abstract
We investigated the feasibility of designing an Anger-logic PET detector module using large-area high-gain avalanche photodiodes (APDs) for a brain-dedicated PET/MRI system. Using Monte Carlo simulations, we systematically optimized the detector design with regard to the scintillation crystal, optical diffuser, surface treatment, layout of large-area APDs, and signal-to-noise ratio (SNR, defined as the 511 keV photopeak position divided by the standard deviation of noise floor in an energy spectrum) of the APD devices. A detector prototype was built comprising an 8 × 8 array of 2.75 × 3.00 × 20.0 mm3 LYSO (lutetium-yttrium-oxyorthosilicate) crystals and a 22.0 × 24.0 × 9.0 mm3 optical diffuser. From the four designs of the optical diffuser tested, two designs employing a slotted diffuser are able to resolve all 64 crystals within the block with good uniformity and peak-to-valley ratio. Good agreement was found between the simulation and experimental results. For the detector employing a slotted optical diffuser, the energy resolution of the global energy spectrum after normalization is 13.4 ± 0.4%. The energy resolution of individual crystals varies between 11.3 ± 0.3% and 17.3 ± 0.4%. The time resolution varies between 4.85 ± 0.04 (center crystal), 5.17 ± 0.06 (edge crystal), and 5.18 ± 0.07 ns (corner crystal). The generalized framework proposed in this work helps to guide the design of detector modules for selected PET system configurations, including scaling the design down to a preclinical PET system, scaling up to a whole-body clinical scanner, as well as replacing APDs with other novel photodetectors that have higher gain or SNR such as silicon photomultipliers.
View details for DOI 10.1088/0031-9155/56/12/010
View details for Web of Science ID 000291095700011
View details for PubMedID 21610292
-
Study of a high-resolution, 3D positioning cadmium zinc telluride detector for PET
PHYSICS IN MEDICINE AND BIOLOGY
2011; 56 (6): 1563-1584
Abstract
This paper investigates the performance of 1 mm resolution cadmium zinc telluride (CZT) detectors for positron emission tomography (PET) capable of positioning the 3D coordinates of individual 511 keV photon interactions. The detectors comprise 40 mm × 40 mm × 5 mm monolithic CZT crystals that employ a novel cross-strip readout with interspersed steering electrodes to obtain high spatial and energy resolution. The study found a single anode FWHM energy resolution of 3.06 ± 0.39% at 511 keV throughout most of the detector volume. Improved resolution is expected with properly shielded front-end electronics. Measurements made using a collimated beam established the efficacy of the steering electrodes in facilitating enhanced charge collection across anodes, as well as a spatial resolution of 0.44 ± 0.07 mm in the direction orthogonal to the electrode planes. Finally, measurements based on coincidence electronic collimation yielded a point spread function with 0.78 ± 0.10 mm FWHM, demonstrating 1 mm spatial resolution capability transverse to the anodes-as expected from the 1 mm anode pitch. These findings indicate that the CZT-based detector concept has excellent performance and shows great promise for a high-resolution PET system.
View details for DOI 10.1088/0031-9155/56/6/004
View details for Web of Science ID 000287848600004
View details for PubMedID 21335649
View details for PubMedCentralID PMC3274175
-
Investigating the temporal resolution limits of scintillation detection from pixellated elements: comparison between experiment and simulation
PHYSICS IN MEDICINE AND BIOLOGY
2011; 56 (3): 735-756
Abstract
This study investigates the physical limitations involved in the extraction of accurate timing information from pixellated scintillation detectors for positron emission tomography (PET). Accurate physical modeling of the scintillation detection process, from scintillation light generation through detection, is devised and performed for varying detector attributes, such as the crystal element length, light yield, decay time and surface treatment. The dependence of light output and time resolution on these attributes, as well as on the photon interaction depth (DoI) of the annihilation quanta within the crystal volume, is studied and compared with experimental results. A theoretical background which highlights the importance of different time blurring factors for instantaneous ('ideal') and exponential ('realistic') scintillation decay is developed and compared with simulated data. For the case of a realistic scintillator, our experimental and simulation findings suggest that dependence of detector performance on DoI is more evident for crystal elements with rough ('as cut') compared to polished surfaces (maximum observed difference of 64% (25%) and 22% (19%) in simulation (measurement) for light output and time resolution, respectively). Furthermore we observe distinct trends of the detector performance dependence on detector element length and surface treatment. For short crystals (3 × 3 × 5 mm(3)) an improvement in light output and time resolution for 'as cut' compared to polished crystals is observed (3% (7%) and 9% (9%) for simulation (measurement), respectively). The trend is reversed for longer crystals (3 × 3 × 20 mm(3)) and an improvement in light output and time uncertainty for polished compared to 'as cut' crystals is observed (36% (6%) and 40% (20%) for simulation (measurement), respectively). The results of this study are used to guide the design of PET detectors with combined time of flight (ToF) and DoI features.
View details for DOI 10.1088/0031-9155/56/3/013
View details for Web of Science ID 000286223100013
View details for PubMedID 21239845
-
Convex Optimization of Coincidence Time Resolution for a High-Resolution PET System
IEEE TRANSACTIONS ON MEDICAL IMAGING
2011; 30 (2): 391-400
Abstract
We are developing a dual panel breast-dedicated positron emission tomography (PET) system using LSO scintillators coupled to position sensitive avalanche photodiodes (PSAPD). The charge output is amplified and read using NOVA RENA-3 ASICs. This paper shows that the coincidence timing resolution of the RENA-3 ASIC can be improved using certain list-mode calibrations. We treat the calibration problem as a convex optimization problem and use the RENA-3's analog-based timing system to correct the measured data for time dispersion effects from correlated noise, PSAPD signal delays and varying signal amplitudes. The direct solution to the optimization problem involves a matrix inversion that grows order (n(3)) with the number of parameters. An iterative method using single-coordinate descent to approximate the inversion grows order (n). The inversion does not need to run to convergence, since any gains at high iteration number will be low compared to noise amplification. The system calibration method is demonstrated with measured pulser data as well as with two LSO-PSAPD detectors in electronic coincidence. After applying the algorithm, the 511 keV photopeak paired coincidence time resolution from the LSO-PSAPD detectors under study improved by 57%, from the raw value of 16.3 ±0.07 ns full-width at half-maximum (FWHM) to 6.92 ±0.02 ns FWHM ( 11.52 ±0.05 ns to 4.89 ±0.02 ns for unpaired photons).
View details for Web of Science ID 000286931000019
View details for PubMedID 20876008
-
Fast List-Mode Reconstruction for Time-of-Flight PET Using Graphics Hardware
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2011; 58 (1): 105-109
View details for DOI 10.1109/TNS.2010.2081376
View details for Web of Science ID 000287086900015
-
Scintillation induced response in passively-quenched Si-based single photon counting avalanche diode arrays
OPTICS EXPRESS
2011; 19 (2): 1665-1679
Abstract
An optical electrical model which studies the response of Si-based single photon counting arrays, specifically silicon photomultipliers (SiPMs), to scintillation light has been developed and validated with analytically derived and experimental data. The scintillator-photodetector response in terms of relative pulse height, 10%-90% rise/decay times to light stimuli of different rise times (ranging from 0.1 to 5 ns) and decay times (ranging from 1 to 50 ns), as well as for different decay times of the photodetector are compared in theory and simulation. A measured detector response is used as a reference to further validate the model and the results show a mean deviation of simulated over measured values of 1%.
View details for Web of Science ID 000286314600127
View details for PubMedID 21263706
-
Compressed Sensing for the multiplexing of PET detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3224–3226
View details for Web of Science ID 000304755603101
-
Silicon Photomultiplier-based Detector Array for TOF PET
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 2415–2417
View details for Web of Science ID 000304755602130
-
Energy and Time Characterization of Silicon Photomultiplier Detector Blocks
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3045–3047
View details for Web of Science ID 000304755603062
-
A New Data Path Design for a PET Data Acquisition System: A Packet Based Approach
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3871–3873
View details for Web of Science ID 000304755604023
-
Functionality Test of a Readout Circuit for a 1mm(3) Resolution Clinical PET System
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3945–3949
View details for Web of Science ID 000304755604037
-
Signal Conditioning Technique for Position Sensitive Photo detectors to Manipulate Pixelated Crystal Identification Capabilities
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 1647–1653
View details for Web of Science ID 000304755601179
-
Measurement-Based Spatially-Varying Point Spread Function for List-Mode PET Reconstruction on GPU
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 2593–2596
View details for Web of Science ID 000304755602171
-
Point Spread Function for PET Detectors Based on the Probability Density Function of the Line Segment
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 4386–4389
View details for Web of Science ID 000304755604132
-
Methods for Increasing the Sensitivity of Simultaneous Multi-Isotope Positron Emission Tomography
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3597–3601
View details for Web of Science ID 000304755603187
-
Fast and Accurate 3D Compton Cone Projections on GPU Using CUDA
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 2572–2575
View details for Web of Science ID 000304755602167
-
Measuring 511 ke V photon interaction locations in three dimensions using 3-D position sensitive scintillation detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3635–3638
View details for Web of Science ID 000304755603196
-
Study of Readout for Groups of Position Sensitive Avalanche Photodiodes Used in a 1 mm(3) Resolution Clinical PET System
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3253–3255
View details for Web of Science ID 000304755603108
-
Algorithms that exploit multi-interaction photon events in sub-millimeter resolution CZT detectors for PET
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 3669–3671
View details for Web of Science ID 000304755603203
-
Time Resolution Performance of an Electro-Optical-Coupled PET Detector for Time-of-Flight PET/MRI
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 2531–2533
View details for Web of Science ID 000304755602156
-
All-optical encoding of PET detector signals
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)/18th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors
IEEE. 2011: 2258–2260
View details for Web of Science ID 000304755602096
-
Analog signal multiplexing for PSAPD-based PET detectors: simulation and experimental validation
PHYSICS IN MEDICINE AND BIOLOGY
2010; 55 (23): 7149-7174
Abstract
A 1 mm(3) resolution clinical positron emission tomography (PET) system employing 4608 position-sensitive avalanche photodiodes (PSAPDs) is under development. This paper describes a detector multiplexing technique that simplifies the readout electronics and reduces the density of the circuit board design. The multiplexing scheme was validated using a simulation framework that models the PSAPDs and front-end multiplexing circuits to predict the signal-to-noise ratio and flood histogram performance. Two independent experimental setups measured the energy resolution, time resolution, crystal identification ability and count rate both with and without multiplexing. With multiplexing, there was no significant degradation in energy resolution, time resolution and count rate. There was a relative 6.9 ± 1.0% and 9.4 ± 1.0% degradation in the figure of merit that characterizes the crystal identification ability observed in the measured and simulated ceramic-mounted PSAPD module flood histograms, respectively.
View details for DOI 10.1088/0031-9155/55/23/001
View details for Web of Science ID 000284261000015
View details for PubMedID 21081831
-
Physical effects of mechanical design parameters on photon sensitivity and spatial resolution performance of a breast-dedicated PET system
MEDICAL PHYSICS
2010; 37 (11): 5838-5849
Abstract
This study aims to address design considerations of a high resolution, high sensitivity positron emission tomography scanner dedicated to breast imaging.The methodology uses a detailed Monte Carlo model of the system structures to obtain a quantitative evaluation of several performance parameters. Special focus was given to the effect of dense mechanical structures designed to provide mechanical robustness and thermal regulation to the minuscule and temperature sensitive detectors.For the energies of interest around the photopeak (450-700 keV energy window), the simulation results predict a 6.5% reduction in the single photon detection efficiency and a 12.5% reduction in the coincidence photon detection efficiency in the case that the mechanical structures are interspersed between the detectors. However for lower energies, a substantial increase in the number of detected events (approximately 14% and 7% for singles at a 100-200 keV energy window and coincidences at a lower energy threshold of 100 keV, respectively) was observed with the presence of these structures due to backscatter. The number of photon events that involve multiple interactions in various crystal elements is also affected by the presence of the structures. For photon events involving multiple interactions among various crystal elements, the coincidence photon sensitivity is reduced by as much as 20% for a point source at the center of the field of view. There is no observable effect on the intrinsic and the reconstructed spatial resolution and spatial resolution uniformity.Mechanical structures can have a considerable effect on system sensitivity, especially for systems processing multi-interaction photon events. This effect, however, does not impact the spatial resolution. Various mechanical structure designs are currently under evaluation in order to achieve optimum trade-off between temperature stability, accurate detector positioning, and minimum influence on system performance.
View details for DOI 10.1118/1.3484059
View details for Web of Science ID 000283747600030
View details for PubMedID 21158296
View details for PubMedCentralID PMC2980543
-
Photo-Detectors for Time of Flight Positron Emission Tomography (ToF-PET)
SENSORS
2010; 10 (11): 10484-10505
Abstract
We present the most recent advances in photo-detector design employed in time of flight positron emission tomography (ToF-PET). PET is a molecular imaging modality that collects pairs of coincident (temporally correlated) annihilation photons emitted from the patient body. The annihilation photon detector typically comprises a scintillation crystal coupled to a fast photo-detector. ToF information provides better localization of the annihilation event along the line formed by each detector pair, resulting in an overall improvement in signal to noise ratio (SNR) of the reconstructed image. Apart from the demand for high luminosity and fast decay time of the scintillation crystal, proper design and selection of the photo-detector and methods for arrival time pick-off are a prerequisite for achieving excellent time resolution required for ToF-PET. We review the two types of photo-detectors used in ToF-PET: photomultiplier tubes (PMTs) and silicon photo-multipliers (SiPMs) with a special focus on SiPMs.
View details for DOI 10.3390/s101110484
View details for Web of Science ID 000284578200058
View details for PubMedID 22163482
View details for PubMedCentralID PMC3230997
-
Performance characterization of a new high resolution PET scintillation detector
PHYSICS IN MEDICINE AND BIOLOGY
2010; 55 (19): 5895-5911
Abstract
Performance of a new high resolution PET detection concept is presented. In this new concept, annihilation radiation enters the scintillator detectors edge-on. Each detector module comprises two 8 × 8 LYSO scintillator arrays of 0.91 × 0.91 × 1 mm(3) crystals coupled to two position-sensitive avalanche photodiodes (PSAPDs) mounted on a flex circuit. Appropriate crystal segmentation allows the recording of all three spatial coordinates of the interaction(s) simultaneously with submillimeter resolution. We report an average energy resolution of 14.6 ± 1.7% for 511 keV photons at FWHM. Coincident time resolution was determined to be 2.98 ± 0.13 ns FWHM on average. The coincidence point spread function (PSF) has an average FWHM of 0.837 ± 0.049 mm (using a 500 μm spherical source) and is uniform across the arrays. Both PSF and coincident time resolution degrade when Compton interactions are included in the data. Different blurring factors were evaluated theoretically, resulting in a calculated PSF of 0.793 mm, in good agreement with the measured value.
View details for DOI 10.1088/0031-9155/55/19/018
View details for Web of Science ID 000282061800018
View details for PubMedID 20844332
-
Effects of multiple-interaction photon events in a high-resolution PET system that uses 3-D positioning detectors
MEDICAL PHYSICS
2010; 37 (10): 5494-5508
Abstract
The authors' laboratory is developing a dual-panel, breast-dedicated PET system. The detector panels are built from dual-LSO-position-sensitive avalanche photodiode (PSAPD) modules-units holding two 8 x 8 arrays of 1 mm3 LSO crystals, where each array is coupled to a PSAPD. When stacked to form an imaging volume, these modules are capable of recording the 3-D coordinates of individual interactions of a multiple-interaction photon event (MIPE). The small size of the scintillation crystal elements used increases the likelihood of photon scattering between crystal arrays. In this article, the authors investigate how MIPEs impact the system photon sensitivity, the data acquisition scheme, and the quality and quantitative accuracy of reconstructed PET images.A Monte Carlo simulated PET scan using the dual-panel system was performed on a uniformly radioactive phantom for the photon sensitivity study. To establish the impact of MIPEs on a proposed PSAPD multiplexing scheme, experimental data were collected from a dual-LSO-PSAPD module edge-irradiated with a 22Na point source, the data were compared against simulation data based on an identical setup. To assess the impact of MIPEs on the dual-panel PET images, a simulated PET of a phantom comprising a matrix of hot spherical radiation sources of varying diameters immersed in a warm background was performed. The list-mode output data were used for image reconstruction, where various methods were used for estimating the location of the first photon interaction in MIPEs for more accurate line of response positioning. The contrast recovery coefficient (CRC), contrast to noise ratio (CNR), and the full width at half maximum spatial resolution of the spheres in the reconstructed images were used as figures of merit to facilitate comparison.Compared to image reconstruction employing only events with interactions confined to one LSO array, a potential single photon sensitivity gain of > 46.9% (> 115.7% for coincidence) was noted for a uniform phantom when MIPEs with summed-energy falling within a +/- 12% window around the photopeak were also included. Both experimental and simulation data demonstrate that < 0.4% of the events whose summed-energy deposition falling within that energy window interacted with both crystal arrays within the same dual-LSO-PSAPD module. This result establishes the feasibility of a proposed multiplexed readout of analog output signals of the two PSAPDs within each module. Using MIPEs with summed-energy deposition within the 511 keV +/- 12% photopeak window and a new method for estimating the location of the first photon interaction in MIPEs, the corresponding reconstructed image exhibited a peak CNR of 7.23 for the 8 mm diameter phantom spheres versus a CNR of 6.69 from images based solely on single LSO array interaction events. The improved system photon sensitivity could be exploited to reduce the scan time by up to approximately 10%, while still maintaining image quality comparable to that achieved if MIPEs were excluded.MIPE distribution in the detectors allows the proposed photodetector multiplexing arrangement without significant information loss. Furthermore, acquiring MIPEs can enhance system photon sensitivity and improve PET image CNR and CRC. The system under development can therefore competently acquire and analyze MIPEs and produce high-resolution PET images.
View details for DOI 10.1118/1.3483262
View details for Web of Science ID 000283483700038
View details for PubMedID 21089785
View details for PubMedCentralID PMC2962664
-
Recent Developments in PET Instrumentation
CURRENT PHARMACEUTICAL BIOTECHNOLOGY
2010; 11 (6): 555-571
Abstract
Positron emission tomography (PET) is used in the clinic and in vivo small animal research to study molecular processes associated with diseases such as cancer, heart disease, and neurological disorders, and to guide the discovery and development of new treatments. This paper reviews current challenges of advancing PET technology and some of newly developed PET detectors and systems. The paper focuses on four aspects of PET instrumentation: high photon detection sensitivity; improved spatial resolution; depth-of-interaction (DOI) resolution and time-of-flight (TOF). Improved system geometry, novel non-scintillator based detectors, and tapered scintillation crystal arrays are able to enhance the photon detection sensitivity of a PET system. Several challenges for achieving high resolution with standard scintillator-based PET detectors are discussed. Novel detectors with 3-D positioning capability have great potential to be deployed in PET for achieving spatial resolution better than 1 mm, such as cadmium-zinc-telluride (CZT) and position-sensitive avalanche photodiodes (PSAPDs). DOI capability enables a PET system to mitigate parallax error and achieve uniform spatial resolution across the field-of-view (FOV). Six common DOI designs, as well as advantages and limitations of each design, are discussed. The availability of fast scintillation crystals such as LaBr(3), and the silicon photomultiplier (SiPM) greatly advances TOF-PET development. Recent instrumentation and initial results of clinical trials are briefly presented. If successful, these technology advances, together with new probe molecules, will substantially enhance the molecular sensitivity of PET and thus increase its role in preclinical and clinical research as well as evaluating and managing disease in the clinic.
View details for Web of Science ID 000281435100003
View details for PubMedID 20497121
-
Design study of a high-resolution breast-dedicated PET system built from cadmium zinc telluride detectors
PHYSICS IN MEDICINE AND BIOLOGY
2010; 55 (9): 2761-2788
Abstract
We studied the performance of a dual-panel positron emission tomography (PET) camera dedicated to breast cancer imaging using Monte Carlo simulation. The proposed system consists of two 4 cm thick 12 x 15 cm(2) area cadmium zinc telluride (CZT) panels with adjustable separation, which can be put in close proximity to the breast and/or axillary nodes. Unique characteristics distinguishing the proposed system from previous efforts in breast-dedicated PET instrumentation are the deployment of CZT detectors with superior spatial and energy resolution, using a cross-strip electrode readout scheme to enable 3D positioning of individual photon interaction coordinates in the CZT, which includes directly measured photon depth-of-interaction (DOI), and arranging the detector slabs edge-on with respect to incoming 511 keV photons for high photon sensitivity. The simulation results show that the proposed CZT dual-panel PET system is able to achieve superior performance in terms of photon sensitivity, noise equivalent count rate, spatial resolution and lesion visualization. The proposed system is expected to achieve approximately 32% photon sensitivity for a point source at the center and a 4 cm panel separation. For a simplified breast phantom adjacent to heart and torso compartments, the peak noise equivalent count (NEC) rate is predicted to be approximately 94.2 kcts s(-1) (breast volume: 720 cm(3) and activity concentration: 3.7 kBq cm(-3)) for a approximately 10% energy window around 511 keV and approximately 8 ns coincidence time window. The system achieves 1 mm intrinsic spatial resolution anywhere between the two panels with a 4 cm panel separation if the detectors have DOI resolution less than 2 mm. For a 3 mm DOI resolution, the system exhibits excellent sphere resolution uniformity (sigma(rms)/mean) < or = 10%) across a 4 cm width FOV. Simulation results indicate that the system exhibits superior hot sphere visualization and is expected to visualize 2 mm diameter spheres with a 5:1 activity concentration ratio within roughly 7 min imaging time. Furthermore, we observe that the degree of spatial resolution degradation along the direction orthogonal to the two panels that is typical of a limited angle tomography configuration is mitigated by having high-resolution DOI capabilities that enable more accurate positioning of oblique response lines.
View details for DOI 10.1088/0031-9155/55/9/022
View details for Web of Science ID 000276816400022
View details for PubMedID 20400807
-
Effects of External Shielding on the Performance of a 1 mm(3) Resolution Breast PET Camera
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 3644–3648
View details for Web of Science ID 000306402903180
-
Analytic Pulse Height Correction in Dual-Ended Readout PET Detectors
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 2151–2154
View details for Web of Science ID 000306402902067
-
Optical Network-based PET DAQ System: One Fiber Optical Connection
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 2020–2025
View details for Web of Science ID 000306402902037
-
Fully 3-D List-mode Positron Emission Tomography Image Reconstruction on GPU using CUDA
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 2635–2637
View details for Web of Science ID 000306402902173
-
Readout Design and Validation for a 1 mm(3) Resolution Clinical PET System
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 3097–3099
View details for Web of Science ID 000306402903058
-
Improving SNR with a Maximum Likelihood Compressed Sensing Decoder for Multiplexed PET Detectors
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 3353–3356
View details for Web of Science ID 000306402903115
-
Mixture Model for Fast Estimation of Positron Range
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 3058–3060
View details for Web of Science ID 000306402903049
-
Acceleration of PET Monte Carlo simulation using the graphics hardware ray-tracing engine
IEEE Nuclear Science Symposium (NSS)/Medical Imaging Conference (MIC)/17th International Workshop on Room-Temperature Semiconductor X-ray and Gamma-ray Detectors
IEEE. 2010: 1848–1855
View details for Web of Science ID 000306402902001
-
Novel Electro-Optical Coupling Technique for Magnetic Resonance-Compatible Positron Emission Tomography Detectors
MOLECULAR IMAGING
2009; 8 (2): 74-86
Abstract
A new magnetic resonance imaging (MRI)-compatible positron emission tomography (PET) detector design is being developed that uses electro-optical coupling to bring the amplitude and arrival time information of high-speed PET detector scintillation pulses out of an MRI system. The electro-optical coupling technology consists of a magnetically insensitive photodetector output signal connected to a nonmagnetic vertical cavity surface emitting laser (VCSEL) diode that is coupled to a multimode optical fiber. This scheme essentially acts as an optical wire with no influence on the MRI system. To test the feasibility of this approach, a lutetium-yttrium oxyorthosilicate crystal coupled to a single pixel of a solid-state photomultiplier array was placed in coincidence with a lutetium oxyorthosilicate crystal coupled to a fast photomultiplier tube with both the new nonmagnetic VCSEL coupling and the standard coaxial cable signal transmission scheme. No significant change was observed in 511 keV photopeak energy resolution and coincidence time resolution. This electro-optical coupling technology enables an MRI-compatible PET block detector to have a reduced electromagnetic footprint compared with the signal transmission schemes deployed in the current MRI/PET designs.
View details for DOI 10.2310/7290.2009.00012
View details for Web of Science ID 000265948200004
View details for PubMedID 19397853
- Simulation study of PET spatial resolution and contrast recovery improvement for PET/MRI dual modality systems. Submitted to Medical Physics 2009
-
1 mm(3) Resolution Breast-Dedicated PET System
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 5378–5381
View details for Web of Science ID 000268656002327
-
Front-End Electronics for a 1 mm(3) Resolution Avalanche Photodiode-Based PET System with Analog Signal Multiplexing
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3146–3149
View details for Web of Science ID 000268656001256
-
Study of a High Resolution, 3-D Positioning Cross-Strip Cadmium Zinc Telluride Detector for PET
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 2871–2878
View details for Web of Science ID 000268656001200
-
Effects of Multiple Photon Interactions in a High Resolution PET System that Uses 3-D Positioning Detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3089–3094
View details for Web of Science ID 000268656001243
-
Effects of Thermal Regulation Structures on the Photon Sensitivity and Spatial Resolution of a 1 mm(3) Resolution Breast-Dedicated PET System
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 5416–5420
View details for Web of Science ID 000268656002334
-
Performance characterization of a new high resolution PET scintillation detector
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 2879–2883
View details for Web of Science ID 000268656001201
-
Convex Optimization of Coincidence Time Resolution for High Resolution PET Systems
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3343–3348
View details for Web of Science ID 000268656001302
-
Pulse Width Modulation: a Novel Readout Scheme for High Energy Photon Detection
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3804–3809
View details for Web of Science ID 000268656002008
-
Can large-area avalanche photodiodes be used for a clinical PET/MRI block detector?
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3948–3953
View details for Web of Science ID 000268656002037
-
Novel Electro-Optically Coupled MR-Compatible PET Detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 3913–3918
View details for Web of Science ID 000268656002030
- Optimization of Coincidence Time Resolution for a High Resolution PET System. Submitted to IEEE Transactions on Medical Imaging 2009
- Design study of a high-resolution breast-dedicated PET system built from cadmium zinc telluride detectors. Submitted to Physics in Medicine Biology 2009
- New Geometry for a Whole Body PET System. Submitted to IEEE Transactions on Nuclear Science, 2009
- Monte Carlo assessment of a dense mechanical design for a 1 mm3 resolution breast-dedicated PET system: effects on photon sensitivity, spatial resolution and multi-interaction photon events. Submitted to Medical Physics 2009
- Sampling Error in CT-based Partial Volume Correction of Lesions Imaged by PET. Submitted to Journal of Nuclear Medicine 2009
- High Resolution, Light Multiplexed 3D Positioning Scintillation Detector for High Resolution PET. Submitted to IEEE Transactions on Nuclear Science 2009
-
A Method to Reject Random Coincidences and Extract True from Multiple Coincidences in PET using 3-D Detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 4515–4520
View details for Web of Science ID 000268656002154
-
Faster Maximum-Likelihood Reconstruction via Explicit Conjugation of Search Directions
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 4336–4341
View details for Web of Science ID 000268656002118
-
Study of Scintillation Crystal Array Parameters for an Advanced PET Scanner Dedicated to Breast Cancer Imaging
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 4180–4185
View details for Web of Science ID 000268656002086
-
Temperature and Bias Voltage Studies of a Large Area Position Sensitive Avalanche Photodiode
IEEE Nuclear Science Symposium Conference 2009
IEEE. 2009: 3664–3669
View details for Web of Science ID 000280505102062
- Performance characterization of a new high resolution PET scintillation detector. Submitted to Physics in Medicine and Biology 2009
- Fast, Accurate and Shift-Varying Line Projections for Iterative Reconstruction Using the GPU. IEEE Transactions in Medical Imaging, March 2009; Vol. 28, (No. 3,): 435-445
- Online calculation of the detector response for high-resolution PET iterative image reconstruction. Submitted to IEEE Transactions on Medical Imaging 2009
- Multiplexing circuits for PSAPD-Based PET Detectors: Simulation and Experimental Validation. Submitted to IEEE Transactions on Nuclear Science 2009
- Maximum NEC Incident Photon Direction Window Using Compton Kinematics for 3-D Positioning PET Detectors. Submitted to IEEE Transactions on Medical Imaging 2009
- Novel Electro-Optical Coupling Technique for Magnetic Resonance-Compatible Positron Emission Tomography Detectors. Molecular Imaging, MAR-APR 2009; Volume 8, (Issue 2,): 74-86,
- New geometry for a whole body PET system. Submitted to IEEE Transactions on Nuclear Science 2009
- Bayesian reconstruction of photon interaction sequences for high-resolution PET detectors. Physics in Medicine and Biology. Selected as Feature Article of the Month, American Institute of Physics, August 2009; Vol. 54 (Issue 17,): pp. 5073-5094,
-
Charge Collection Studies of a High Resolution CZT-Based Detector for PET
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2009: 5310–5317
View details for Web of Science ID 000268656002315
- Study of a High Resolution, 3-D Positioning Cross-Strip Cadmium Zinc Telluride Detector for PET. Submitted to Medical Physics 2009
- Can large-area avalanche photodiodes be used for a PET detector insert for an MRI system? Submitted to Medical Physics 2009
-
New imaging technologies to enhance the molecular sensitivity of positron emission tomography
PROCEEDINGS OF THE IEEE
2008; 96 (3): 439-467
View details for DOI 10.1109/JPROC.2007.913504
View details for Web of Science ID 000253299600006
- Characterization of a Small Animal Time-Domain Fluorescence Tomography Imaging System., IEEE Transactions on Medical Imaging. Jan. 2008; Volume 27 (Issue 1,): Page(s):58 - 63.
- Simulation and Measurement of Gamma-Ray and Annihilation Photon Imaging Detectors. IEEE Transactions on Nuclear Science. 2008: Undergoing review,
- New Imaging Technologies to Enhance the Molecular Sensitivity of Positron Emission Tomography. Proceedings of the IEEE, March 2008; Vol.96, (No.3,): pp. 439-67.
-
Performance characterization of a miniature, high sensitivity gamma ray camera
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2007; 54 (5): 1492-1497
View details for DOI 10.1109/TNS.2007.902367
View details for Web of Science ID 000250313600006
-
Effects of system geometry and other physical factors on photon sensitivity of high-resolution positron emission tomography
PHYSICS IN MEDICINE AND BIOLOGY
2007; 52 (13): 3753-3772
Abstract
We are studying two new detector technologies that directly measure the three-dimensional coordinates of 511 keV photon interactions for high-resolution positron emission tomography (PET) systems designed for small animal and breast imaging. These detectors are based on (1) lutetium oxyorthosilicate (LSO) scintillation crystal arrays coupled to position-sensitive avalanche photodiodes (PSAPD) and (2) cadmium zinc telluride (CZT). The detectors have excellent measured 511 keV photon energy resolutions (=12% FWHM for LSO-PSAPD and =3% for CZT) and good coincidence time resolutions (2 ns FWHM for LSO-PSAPD and 8 ns for CZT). The goal is to incorporate the detectors into systems that will achieve 1 mm(3) spatial resolution ( approximately 1 mm(3), uniform throughout the field of view (FOV)), with excellent contrast resolution as well. In order to realize 1 mm(3) spatial resolution with high signal-to-noise ratio (SNR), it is necessary to significantly boost coincidence photon detection efficiency (referred to as photon sensitivity). To facilitate high photon sensitivity in the proposed PET system designs, the detector arrays are oriented 'edge-on' with respect to incoming 511 keV annihilation photons and arranged to form a compact FOV with detectors very close to, or in contact with, the subject tissues. In this paper, we used Monte Carlo simulation to study various factors that limit the photon sensitivity of a high-resolution PET system dedicated to small animal imaging. To optimize the photon sensitivity, we studied several possible system geometries for a fixed 8 cm transaxial and 8 cm axial FOV. We found that using rectangular-shaped detectors arranged into a cylindrical geometry does not yield the best photon sensitivity. This is due to the fact that forming rectangular-shaped detectors into a ring produces significant wedge-shaped inter-module gaps, through which Compton-scattered photons in the detector can escape. This effect limits the center point source photon sensitivity to <6% for a cylindrical system with rectangular-shaped blocks, 8 cm diameter and 8 cm axial FOV, and a 350-650 keV energy window setting. On the other hand, if the proposed rectangular-shaped detectors are arranged into an 8 x 8 x 8 cm(3) FOV box configuration (four detector panels), there are only four inter-module gaps and the favorable distribution of these gaps yields >8% photon sensitivity for the LSO-PSAPD box configuration and >15% for CZT box geometry, using a 350-650 keV energy window setting. These simulation results compare well with analytical estimations. The trend is different for a clinical whole-body PET system that uses conventional LSO-PMT block detectors with larger crystal elements. Simulations predict roughly the same sensitivity for both box and cylindrical detector configurations. This results from the fact that a large system diameter (>80 cm) results in relatively small inter-module gaps in clinical whole-body PET. In addition, the relatively large block detectors (typically >5 x 5 cm(2) cross-sectional area) and large crystals (>4 x 4 x 20 mm(3)) enable a higher fraction of detector scatter photons to be absorbed compared to a small animal system. However, if the four detector sides (panels) of a box-shaped system geometry are configured to move with respect to each other, to better fit the transaxial FOV to the actual size of the object to be imaged, a significant increase in photon sensitivity is possible. Simulation results predict a 60-100% relative increase of photon sensitivity for the proposed small animal PET box configurations and >60% increase for a clinical whole-body system geometry. Thus, simulation results indicate that for a PET system built from rectangular-shaped detector modules, arranging them into a box-shaped system geometry may help us to significantly boost photon sensitivity for both small animal and clinical PET systems.
View details for DOI 10.1088/0031-9155/52/13/007
View details for Web of Science ID 000247048300007
View details for PubMedID 17664575
-
A new positioning algorithm for position-sensitive avalanche photodiodes
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2007; 54 (3): 433-437
Abstract
We are using a novel position sensitive avalanche photodiode (PSAPD) for the construction of a high resolution positron emission tomography (PET) camera. Up to now most researchers working with PSAPDs have been using an Anger-like positioning algorithm involving the four corner readout signals of the PSAPD. This algorithm yields a significant non-linear spatial "pin-cushion" distortion in raw crystal positioning histograms. In this paper, we report an improved positioning algorithm, which combines two diagonal corner signals of the PSAPD followed by a 45° rotation to determine the X or Y position of the interaction. We present flood positioning histogram data generated with the old and new positioning algorithms using a 3 × 4 array of 2 × 2 × 3 mm3 and a 3 × 8 array of 1 × 1 × 3 mm3 of LSO crystals coupled to 8 × 8 mm2 PSAPDs. This new algorithm significantly reduces the pin-cushion distortion in raw flood histogram image.
View details for DOI 10.1109/TNS.2007.894129
View details for Web of Science ID 000247391200004
View details for PubMedCentralID PMC3846097
-
A New Positioning Algorithm for Position-Sensitive Avalanche Photodiodes.
IEEE transactions on nuclear science
2007; 54 (3)
Abstract
We are using a novel position sensitive avalanche photodiode (PSAPD) for the construction of a high resolution positron emission tomography (PET) camera. Up to now most researchers working with PSAPDs have been using an Anger-like positioning algorithm involving the four corner readout signals of the PSAPD. This algorithm yields a significant non-linear spatial "pin-cushion" distortion in raw crystal positioning histograms. In this paper, we report an improved positioning algorithm, which combines two diagonal corner signals of the PSAPD followed by a 45° rotation to determine the X or Y position of the interaction. We present flood positioning histogram data generated with the old and new positioning algorithms using a 3 × 4 array of 2 × 2 × 3 mm3 and a 3 × 8 array of 1 × 1 × 3 mm3 of LSO crystals coupled to 8 × 8 mm2 PSAPDs. This new algorithm significantly reduces the pin-cushion distortion in raw flood histogram image.
View details for DOI 10.1109/TNS.2007.894129
View details for PubMedID 24307743
View details for PubMedCentralID PMC3846097
-
Performance characterization of a novel thin position-sensitive avalanche photodiode for 1 mm resolution positron emission tomography
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2007; 54 (3): 415-421
View details for DOI 10.1109/TNS.2007.894128
View details for Web of Science ID 000247391200001
-
Current Trends in Preclinical PET System Design.
PET clinics
2007; 2 (2): 125-160
Abstract
PET is used in laboratory small-animal research to visualize and track certain molecular processes associated with diseases such as cancer, heart disease, and neurologic disorders in living small-animal models of disease. The current and next generation of PET molecular imaging probes, assays, and imaging systems still have substantial room to improve PET's ability to detect, visualize, and quantify low concentrations of probe interacting with its target, which we refer to as the molecular sensitivity. This article focuses on the challenges of advancing PET system and some of the new imaging system technologies under investigation to enhance PET's molecular sensitivity substantially.
View details for DOI 10.1016/j.cpet.2007.12.001
View details for PubMedID 27157870
-
Study of the performance of a novel 1 mm resolution dual-panel PET camera design dedicated to breast cancer imaging using Monte Carlo simulation
MEDICAL PHYSICS
2007; 34 (2): 689-702
Abstract
We studied the performance of a dual-panel positron emission tomography (PET) camera dedicated to breast cancer imaging using Monte Carlo simulation. The PET camera under development has two 10x 15 cm(2) plates that are constructed from arrays of I X 1 X 3 mm(3) LSO crystals coupled to novel ultra-thin (<200 Am) silicon position-sensitive avalanche photodiodes (PSAPD). In this design the photodetectors are configured "edge-on" with respect to incoming photons which encounter a minimum of 2 cm thick of LSO with directly measured photon interaction depth. Simulations predict that this camera will have 10-15% photon sensitivity, for an 8-4 cm panel separation. Detector measurements show approximately 1 mm(3) intrinsic spatial resolution, <12% energy resolution, and approximately 2 ns coincidence time resolution. By performing simulated dual-panel PET studies using a phantom comprising active breast, heart, and torso tissue, count performance was studied as a function of coincident time and energy windows. We also studied visualization of hot spheres of 2.5-4.0 mm diameter and various locations within the simulated breast tissue for 1 X 1 X 3 mm(3), 2 x 2 x 10 mm(3), 3 x 3 x 30 mm(3), and 4 X 4 X 20 mm(3) LSO crystal resolutions and different panel separations. Images were reconstructed by focal plane tomography with attenuation and normalization corrections applied. Simulation results indicate that with an activity concentration ratio of tumor:breast:heart:torso of 10:1:10:1 and 30 s of acquisition time, only the dual-plate PET camera comprising 1 X 1 X 3 mm(3) crystals could resolve 2.5 mm diameter spheres with an average peak-to-valley ratio of 1.3.
View details for DOI 10.1118/1.2409480
View details for Web of Science ID 000244424200035
View details for PubMedID 17388187
-
Prototype parallel readout system for position sensitive PMT based gamma ray imaging systems
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2007; 54 (1): 60-65
View details for DOI 10.1109/TNS.2006.889157
View details for Web of Science ID 000244311600009
- Current Trends in Pre-Clinical Positron Emission Tomography System Design. PET Clinics, 2007; Vol. 2 (No. 2): pp 125-160
-
Noise analysis of LSO-PSAPD PET detector front-end multiplexing circuits
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 3212–3219
View details for Web of Science ID 000257380402138
-
Data acquisition system design for a 1 mm(3) resolution PSAPD-based PET system
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 3206–3211
View details for Web of Science ID 000257380402137
-
Design study of a high-resolution breast-dedicated PET system built from cadmium zinc telluride detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 3700–3704
View details for Web of Science ID 000257380402239
-
Evaluation of free-running ADCs for high resolution PET data acquisition
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 3328–3331
View details for Web of Science ID 000257380402160
-
Accurately positioning events in a high-resolution PET system that uses 3D CZT detectors
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 2660–2664
View details for Web of Science ID 000257380402023
-
PET image reconstruction with a Bayesian projector for multi-electronic collimation schemes
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2007: 2799–2802
View details for Web of Science ID 000257380402050
-
Bayesian estimator for angle recovery: Event classification and reconstruction in positron emission tomography
27th International Workshop on Bayesian Inference and Maximum Entropy Methods in Science and Engineering
AMER INST PHYSICS. 2007: 362–371
View details for Web of Science ID 000251381000040
- Bayesian Estimator for Angle Recovery: Event Classification and Reconstruction in Positron Emission Tomography, Journal of Bayesian Inference and Maximum Entropy Methods in Science and Engineering, American Institutes of Physics, 2007; Volume 954: pp. 362-371,
- Prototype Parallel Readout System for Position Sensitive PMT based Gamma-Ray Imaging Systems. IEEE Transactions on Nuclear Science. 2007; 54-1(1),: 60-65
- Study of the Performance of a Novel 1 mm Resolution Dual-Panel PET Camera Design Dedicated to Breast Cancer Imaging Using Monte Carlo Simulation. Medical Physics 2007; 34(2),: 689-702
- Performance Characterization of a Novel Thin Position-Sensitive Avalanche Photodiode for High Resolution Positron Emission Tomography. IEEE Transactions on Nuclear Science. Part 1 June 2007; Volume 54 (3): Page(s):415 - 421
- Effects of System Geometry and Other Physical Factors on Photon Sensitivity of High Resolution Positron Emission Tomography. Physics in Medicine and. Biology. 2007; 52: 3753-3772.
- A New Positioning Algorithm for Position-Sensitive Avalanche Photodiodes. IEEE Transactions on Nuclear Science. 2007; Volume 54 (3, Part 1): Page(s):433 ? 437.
- Performance Characterization of a Miniature, High Sensitivity Gamma-Ray Camera. IEEE Transactions on Nuclear Science. Part 1 OCT 2007; 54(5): 1492-1497
-
Positioning annihilation photon interactions in a thin LSO crystal sheet with a position-sensitive avalanche photodiode
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2006; 53 (5): 2549-2556
View details for DOI 10.1109/TNS.2006.877178
View details for Web of Science ID 000241367100012
-
Image processing algorithms to facilitate and enhance sentinel node detection using a hand-held gamma ray camera in surgical breast cancer staging
Workshop on Nuclear Radiology of Breast Cancer
IST EDITORIALI POLGRAFICI INT. 2006: 99–101
Abstract
We have developed a miniature scintillation camera to be used in surgical cancer staging. The availability of such a compact hand-held gamma camera may in certain cases improve localization of the sentinel lymph node and reduce the duration of a surgical breast cancer staging procedure. We have investigated image processing algorithms applied to planar images that may improve node detection capabilities for breast cancer staging. We have also studied contrast enhancement methods that may be able to identify nodes that would otherwise be missed. Exposure duration for a given camera position can be adaptively shortened or increased by using an optical flow algorithm to estimate camera motion with respect to the current frame. By determining if the camera is in motion or not, the exposure time may be increased to allow more image counts to accumulate at a given camera position. Adaptive exposure time may improve the ease of use of the hand-held camera, and allow regions of interest to be imaged more effectively. We feel that these image processing techniques can improve the utility of a hand-held gamma ray imager for sentinel lymph node detection during breast cancer staging.
View details for Web of Science ID 000245817500027
View details for PubMedID 17646006
-
GRAY: High Energy Photon Ray Tracer for PET Applications
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 2011–2015
View details for Web of Science ID 000288875602012
-
Fully 3-D List-Mode OSEM Accelerated by Graphics Processing Units
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 2196–2202
View details for Web of Science ID 000288875602054
-
Characterization of Two Thin Postion-Sensitive Avalanche Photodiodes on a Single Flex Circuit for Use in 3-D Positioning PET Detectors
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 2469–2472
View details for Web of Science ID 000288875602115
-
A high speed fully digital data acquisition system for Positron Emission Tomography
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 1909–1911
View details for Web of Science ID 000288875601201
-
Incident Photon Direction Calculation Using Bayesian Estimation for High Energy Photon Detector Systems with 3D Positioning Capability
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 2008–2010
View details for Web of Science ID 000288875602011
- Impact of High Energy Resolution Detectors on the Performance of a PET System Dedicated to Breast Cancer Imaging. . Physica Medica. Selected Top 10 Most Cited Papers in Physica Medica (European Journal of Medical Physics). 2006; Vol. XXI (Suppl. 1): pp. 28-34
-
A Method to Include Single Photon Events in Image Reconstruction for a 1 mm Resolution PET System Built with Advanced 3-D Positioning Detectors
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 1740–1745
View details for Web of Science ID 000288875601167
-
Accurately Positioning and Incorporating Tissue-Scattered Photons into PET Image Reconstruction
15th International Workshop on Room-Temperature Semiconductor X- and Gamma-Ray Detectors/ 2006 IEEE Nuclear Science Symposium
IEEE. 2006: 1746–1751
View details for Web of Science ID 000288875601168
- Positioning Annihilation Photon Interactions in a Thin LSO Crystal Sheet with a Position-Sensitive Avalanche Photodiodes. IEEE Transactions on Nuclear Science. 2006; 53-5(1), (Part 1 Oct): 2549-2556,
- Image Processing Algorithms to Facilitate and Enhance Sentinel Node Detection using a Hand-Held Gamma-Ray Camera in Surgical Breast Cancer Staging. Physica Medica. 2006; Vol. XXI (Suppl. 1): pp.99-101
- Evaluation of a Dual-Head PET Camera Design Dedicated to Breast Cancer Imaging. Physica Medica. 2006; Vol. XXI (Suppl.1): pp. 94-98
-
Evaluation of a dual-panel PET camera design to breast cancer imaging
Workshop on Nuclear Radiology of Breast Cancer
IST EDITORIALI POLGRAFICI INT. 2006: 94–98
Abstract
We are developing a novel, portable dual-panel positron emission tomography (PET) camera dedicated to breast cancer imaging. With a sensitive area of approximately 150 cm(2), this camera is based on arrays of lutetium oxyorthosilicate (LSO) crystals (1x1x3 mm(3)) coupled to 11x11-mm(2) position-sensitive avalanche photodiodes (PSAPD). GATE open source software was used to perform Monte Carlo simulations to optimize the parameters for the camera design. The noise equivalent counting (NEC) rate, together with the true, scatter, and random counting rates were simulated at different time and energy windows. Focal plane tomography (FPT) was used for visualizing the tumors at different depths between the two detector panels. Attenuation and uniformity corrections were applied to images.
View details for Web of Science ID 000245817500026
View details for PubMedID 17646005
-
2004 Workshop on the Nuclear Radiology of Breast Cancer - Rome (Italy) October 22-23, 2004 - Preface
PHYSICA MEDICA
2006; 21: 1-1
View details for Web of Science ID 000245817500001
-
Impact of high energy resolution detectors on the performance of a PET system dedicated to breast cancer imaging
Workshop on Nuclear Radiology of Breast Cancer
IST EDITORIALI POLGRAFICI INT. 2006: 28–34
Abstract
We are developing a high resolution, high sensitivity PET camera dedicated to breast cancer imaging. We are studying two novel detector technologies for this imaging system: a scintillation detector comprising layers of small lutetium oxyorthosilicate (LSO) crystals coupled to new position sensitive avalanche photodiodes (PSAPDs), and a pure semiconductor detector comprising cadmium zinc telluride (CZT) crystal slabs with thin anode and cathode strips deposited in orthogonal directions on either side of each slab. Both detectors achieve 1 mm spatial resolution with 3-5 mm directly measured photon interaction depth resolution, which promotes uniform reconstructed spatial resolution throughout a compact, breast-size field of view. Both detector types also achieve outstanding energy resolution (<3% and <12%, respectively for LSO-PSAPD and CZT at 511 keV). This paper studies the effects that this excellent energy resolution has on the expected system performance. Results indicate the importance that high energy resolution and narrow energy window settings have in reducing background random as well as scatter coincidences without compromising statistical quality of the dedicated breast PET data. Simulations predict that using either detector type the excellent performance and novel arrangement of these detectors proposed for the system facilitate approximately 20% instrument sensitivity at the system center and a peak noise-equivalent count rate of >4 kcps for 200 microCi in a simulated breast phantom.
View details for Web of Science ID 000245817500011
View details for PubMedID 17645990
- Count Rate Studies of a Box-Shaped PET Breast Imaging System Comprised of Position Sensitive Avalanche Photodiodes Utilizing Monte Carlo Simulation. Physica Medica. 2006; Vol. XXI (Suppl. 1): pp. 64-67
- 2004 Workshop on the Nuclear Radiology of Breast Cancer - Rome (Italy) October 22-23, 2004 ? Preface, Physica Medica, 2006; Volume: 21 (Suppl. 1): Pages: 1-1
-
Scintillation crystal design features for a miniature gamma ray camera
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2005; 52 (5): 1439-1446
View details for DOI 10.1109/TNS.2005.858178
View details for Web of Science ID 000233780800036
-
Compact readout electronics for position sensitive photomultiplier tubes
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2005; 52 (1): 21-27
View details for DOI 10.1109/TNS.2004.843134
View details for Web of Science ID 000228168700004
- Primer on Molecular Imaging Technology. European Journal of Nuclear Medicine and Molecular Imaging, 2005; , 32-2,: S325-45,
-
Finite element model based spatial linearity correction for scintillation detectors that use position sensitive avalanche photodiodes
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 2459–2462
View details for Web of Science ID 000241851904005
-
Performance characterization of a novel thin position-sensitive avalanche photodiode-based detector for high resolution PET
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 2478–2482
View details for Web of Science ID 000241851904009
-
Charge multiplexing readout for position sensitive avalanche photodiodes
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 2935–2937
View details for Web of Science ID 000241851904112
-
Monte Carlo simulation study of a dual-plate PET camera dedicated to breast cancer Imaging
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 1667–1671
View details for Web of Science ID 000241851902102
-
Investigation of scintillation light multiplexing for PET detectors based on position sensitive avalanche photodiodes
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 2027–2030
View details for Web of Science ID 000241851903044
-
Comparing geometries for a PET system with 3-D photon positioning capability
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 1709–1712
View details for Web of Science ID 000241851902111
-
Component based normalization for PET systems with depth of interaction measurement capability
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2005: 2108–2111
View details for Web of Science ID 000241851903063
- Compact Readout Electronics for Position Sensitive Photomultiplier Tubes. IEEE Transactions on Nuclear Science, 2005; 52-1(1),: 21-27,
- Scintillation Crystal Design Features for a Miniature Gamma-Ray Camera. IEEE Transactions on Nuclear Science, 2005; 52-5(1),: 1439-1446,
-
Methods to extract more light from minute scintillation crystals used in an ultra-high resolution Positron Emission Tomography detector
2nd International Conference on Imaging Technologies in Biomedical Sciences
ELSEVIER SCIENCE BV. 2004: 35–40
View details for DOI 10.1016/j.nima.2004.03.013
View details for Web of Science ID 000222712200008
-
Study of low noise multichannel readout electronics for high sensitivity PET systems based on avalanche photodiode arrays
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2004; 51 (3): 764-769
View details for DOI 10.1109/TNS.2004.829599
View details for Web of Science ID 000222644100025
-
Investigation of position sensitive avalanche photodiodes for a new high-resolution PET detector design
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2004; 51 (3): 805-810
View details for DOI 10.1109/TNS.2004.830112
View details for Web of Science ID 000222644100032
-
Prototype parallel readout system for position sensitive PMT based gamma ray imaging systems
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 1891–1894
View details for Web of Science ID 000223398000420
-
Positioning annihilation photon interactions in a thin LSO crystal sheet with a position-sensitive avalanche photodiode
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 2985–2989
View details for Web of Science ID 000232002104070
-
Simulation and measurement of gamma ray and annihilation photon imaging detectors
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 4019–4022
View details for Web of Science ID 000232002105152
-
Scintillation crystal design features for a miniature gamma ray camera
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 1967–1971
View details for Web of Science ID 000223398000437
-
Investigation of position sensitive avalanche photodiodes for a new high resolution PET detector design
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 2262–2266
View details for Web of Science ID 000223398000502
-
Compact readout electronics for position sensitive photomultiplier tubes
IEEE Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 1962–1966
View details for Web of Science ID 000223398000436
- Study of Low Noise Multi-Channel Readout Electronics for High Sensitivity PET Systems Based on Avalanche Photodiode Arrays. IEEE Transactions on Nuclear Science, 2004; 51-3(2),: 764-9,
- Investigation of Position Sensitive Avalanche Photodiodes for a New High Resolution PET Detector Design. IEEE Transactions on Nuclear Science, 2004; 51-3(2),: 805-810,
- Methods to Extract More Light from Minute Scintillation Crystals Used in an Ultra-High Resolution Positron Emission Tomography Detector. Nuclear Instruments and Methods in Physics Research A, 2004; 527(1-2):: 35-40.
-
Characterization of performance of a miniature, high sensitivity gamma ray camera
Nuclear Science Symposium/Medical Imaging Conference
IEEE. 2004: 3997–4000
View details for Web of Science ID 000232002105147
-
Detector design issues for compact nuclear emission cameras dedicated to breast imaging
1st Topical Symposium on Functional Breast Imaging with Advanced Detectors
ELSEVIER SCIENCE BV. 2003: 60–74
View details for Web of Science ID 000180900800011
- Detector Design Issues for Compact Nuclear Emission Cameras Dedicated to Functional Breast Imaging. Nuclear Instruments and Methods in Physics Research A, 2003; 497-1,: 60-74,
-
Investigation of low noise, low cost readout electronics for high sensitivity PET systems based on avalanche photodiode arrays
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)
IEEE. 2003: 661–665
View details for Web of Science ID 000185702500143
-
Initial studies of a new detector design for ultra-high resolution Positron Emission Tomography
IEEE Nuclear Science Symposium/Medical Imaging Conference (NSS/MIC)
IEEE. 2003: 1751–1755
View details for Web of Science ID 000185702500385
-
Design of a high-resolution and high-sensitivity scintillation crystal array for PET with nearly complete light collection
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2002; 49 (5): 2236-2243
View details for DOI 10.1109/TNS.2002.803870
View details for Web of Science ID 000179177300032
-
Evaluation of breast tumor detectability with two dedicated, compact scintillation cameras
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2002; 49 (3): 794-802
View details for Web of Science ID 000178670800028
-
Performance analysis of an improved 3-D PET Monte Carlo simulation and scatter correction
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2002; 49 (1): 83-89
View details for Web of Science ID 000175427300015
- Centered Versus Non-Centered Source For Intracoronary Artery Radiation Therapy: A Model Based on the Scripps Trial. American Heart Journal, 2002; 143-2: 342-8
-
Expanding the versatility of a more accurate accelerated Monte Carlo simulation for 3D PET: Data correction of PET emission scans using I-124
IEEE Nuclear Science Symposium
IEEE. 2002: 2105–2109
View details for Web of Science ID 000178495800461
-
Design of a high resolution and high sensitivity scintillation crystal array with nearly perfect light collection
IEEE Nuclear Science Symposium
IEEE. 2002: 48–52
View details for Web of Science ID 000178495800011
- Design of a High-Resolution and High-Sensitivity Scintillation Crystal Array for PET with Nearly Complete Light Collection. IEEE Transactions on Nuclear Science, 2002; 49-5(1),: 2236-43
- Evaluation of Breast Tumor Detectability with Two Dedicated, Compact Scintillation Cameras. IEEE Transactions on Nuclear Science, 2002; 49-3(1),: 794-802,
- Performance Analysis of an Improved 3-D PET Monte Carlo Simulation and Scatter Correction. IEEE Transactions on Nuclear Science, 2002; 49-1(1),: 83-89,
-
Investigation of microcolumnar scintillators on an optical fiber coupled compact imaging system
Medical Imaging Conference (MIC)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 2001: 637–44
View details for Web of Science ID 000170576300005
-
Investigation of accelerated Monte Carlo techniques for PET simulation and 3D PET scatter correction
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
2001; 48 (1): 74-81
View details for Web of Science ID 000167393800011
- Investigation of Accelerated Monte Carlo Techniques for PET Simulation and 3-D PET Scatter Correction. IEEE Transactions on Nuclear Science, 2001; 48-1(1),: 74-81
- Investigation of Microcolumnar Scintillators on an Optical Fiber Coupled Compact Imaging System. IEEE Transactions on Nuclear Science, 2001; 48-3(2),: 637-44,
- Corrigendum: Calculation of Positron Range and its Effect on Positron Emission Tomography System Spatial Resolution. Physics in Medicine and Biology 2000; 45-2: 559
- Calculation of Positron Range and its Effect on Positron Emission Tomography System Spatial Resolution. Physics in Medicine and Biology 1999; 44,: 781-799,
-
Investigation of accelerated monte carlo techniques for PET simulation and 3-D PET scatter correction
1999 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1999: 1500–1504
View details for Web of Science ID 000089372200311
-
A miniature phoswich detector for gamma-ray localization and beta imaging
1997 Medical Imaging Conference
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1998: 1166–73
View details for Web of Science ID 000074190800019
-
A dual detector beta-ray imaging probe with gamma-ray background suppression for use in intra-operative detection of radiolabeled tumors
7th Pisa Meeting on Advanced Detectors
ELSEVIER SCIENCE BV. 1998: 511–16
View details for Web of Science ID 000074975100122
- A Miniature Phoswich Detector for Gamma-Ray Localization and Beta Imaging. IEEE Transactions on Nuclear Science, 1998; 45-3(2),: 1166-73,
-
A miniature phoswich detector for gamma-ray localization and beta imaging
1997 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1998: 1028–1032
View details for Web of Science ID 000074401900224
- A Dual Detector Beta-Ray Imaging Probe with Gamma-Ray Background Suppression for Use in Intra-Operative Detection of Radiolabeled Tumors. Nuclear Instruments and Methods in Physics Research A 1998; 409: 511-16,
-
Design and performance of gamma and beta intra-operative imaging probes
V International Conference on Application of Physics in Medicine and Biology (Trieste Medical Physics 96) / IX Congresso AIFB / EFOMP Medical Physics 96 / EUTECH 96
ELSEVIER SCI LTD. 1997: 243–246
View details for Web of Science ID 000074057200067
-
PSPMT and photodiode designs of a small scintillation camera for imaging malignant breast tumors
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1513–20
View details for Web of Science ID A1997XP91900008
-
Gamma and beta intra-operative imaging probes
4th International Conference on Position-Sensitive Detectors
ELSEVIER SCIENCE BV. 1997: 324–29
View details for Web of Science ID A1997XU98100065
-
Investigation of crystal geometries for fiber coupled gamma imaging intra-operative probes
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1254–61
View details for Web of Science ID A1997XF30000027
-
Investigation of a new readout scheme for high resolution scintillation crystal arrays using photodiodes
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1208–13
View details for Web of Science ID A1997XF30000019
-
Discrete scintillator coupled mercuric iodide photodetector arrays for breast imaging
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1127–33
View details for Web of Science ID A1997XF30000006
-
Development of an intraoperative gamma camera based on a 256-pixel mercuric iodide detector array
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1242–48
View details for Web of Science ID A1997XF30000025
-
Annihilation gamma ray background characterization and rejection for a small beta camera used for tumor localization during surgery
1996 Medical Imaging Conference (MIC) / Nuclear Science Symposium (NSS)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1997: 1120–26
View details for Web of Science ID A1997XF30000005
-
Compton scatter and X-ray crosstalk and the use of very thin intercrystal septa in high-resolution PET detectors
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
1997; 44 (2): 218-224
View details for Web of Science ID A1997WU14300016
- Investigation of a New Readout Scheme for High Resolution Scintillation Crystal Arrays Using Photodiodes. IEEE Transactions on Nuclear Science 1997; 44-3(2),: 1208-13
-
A new photodiode readout scheme for high resolution scintillation crystal arrays
1996 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1997: 1223–1227
View details for Web of Science ID A1997BH59W00265
-
PSPMT and PIN diode designs of a small scintillation camera for imaging malignant breast tumors
1996 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1997: 1196–1200
View details for Web of Science ID A1997BH59W00259
-
Investigation of crystal geometries for fiber coupled gamma imaging intra-operative probes
1996 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1997: 1135–1139
View details for Web of Science ID A1997BH59W00246
-
Discrete scintillator coupled mercuric iodide photodetector arrays for breast imaging
1996 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1997: 1034–1038
View details for Web of Science ID A1997BH59W00227
-
Annihilation gamma ray background characterization and rejection for a positron camera
1996 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1997: 1044–1048
View details for Web of Science ID A1997BH59W00229
- Development of an Intraoperative Gamma Camera Based on a 256-Pixel Mercuric Iodide Detector Array. IEEE Transactions on Nuclear Science, 1997; 44-3(2),: 1242-48,
- Compton Scatter and X-Ray Crosstalk and the Use of Very Thin Intercrystal Septa in High Resolution PET Detectors. IEEE Transactions on Nuclear Science 1997; 44-2: 18-24
- Investigation of Crystal Geometries for Fiber Coupled Gamma Imaging Intra-Operative Probes. IEEE Transactions on Nuclear Science, 1997; 44-3(2),: 1254-61
- Annihilation Gamma-Ray Background Characterization and Rejection for a Small Beta Camera Used for Tumor Localization During Surgery. IEEE Transactions on Nuclear Science 1997; 44-4: 1120-26,
- Discrete Scintillator Coupled Mercuric Iodide Photodetector Arrays for Breast Imaging. IEEE Transactions on Nuclear Science, 1997; 44-3(2),: 1127-33,
- PSPMT and Photodiode Designs of a Small Scintillation Camera for Imaging Malignant Breast Tumors. . IEEE Transactions on Nuclear Science, 1997; 44-4(1),: 1513-20,
- Gamma and Beta Intra-Operative Imaging Probes. Nuclear Instruments and Methods in Physics Research A, 1997; 392: 324-29
- Design and Performance of Gamma and Beta Intra-Operative Imaging Probes. Physica Medica 1997; Vol. XIII (Suppl. 1): S243-247
-
Characterization of fluor concentration and geometry in organic scintillators for in situ beta imaging
IEEE TRANSACTIONS ON NUCLEAR SCIENCE
1996; 43 (6): 3342-3347
View details for Web of Science ID A1996WC90500019
-
Mercuric iodide photodetector arrays for gamma-ray imaging
9th International Workshop on Room Temperature Semiconductor X-Ray and Gamma-Ray Detectors, Associated Electronics and Applications
ELSEVIER SCIENCE BV. 1996: 295–300
View details for Web of Science ID A1996VW52700066
-
Design considerations and initial performance of a 1.2 cm(2) beta imaging intra-operative probe
1995 Nuclear Science Symposium / Medical Imaging Conference (NSS/MIC 95)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1996: 2326–35
View details for Web of Science ID A1996VD77700020
-
Optimizing light collection from thin scintillators used in a beta-ray camera for surgical use
1995 Nuclear Science Symposium / Medical Imaging Conference (NSS/MIC 95)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1996: 2053–60
View details for Web of Science ID A1996UT04400179
- Design Considerations and Initial Performance of a 1.2 cm2 Beta Imaging Intra-Operative Probe. IEEE Transactions on Nuclear Science, 1996; 43-4(1): 2326-2335
-
Removal of the effect of compton scattering in 3-D whole body positron emission tomography by Monte Carlo
1995 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1996: 1050–1054
View details for Web of Science ID A1996BF95Z00236
-
Design considerations and initial performance of a 1.2cm(2) beta imaging intra-operative probe
1995 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1996: 1791–1795
View details for Web of Science ID A1996BF95Z00392
-
Compton scatter and x-ray crosstalk and the use of very thin inter-crystal septa in high resolution pet detectors
1995 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1996: 1036–1040
View details for Web of Science ID A1996BF95Z00233
-
Characterization of fluor concentration and geometry in organic scintillators for in situ beta imaging
1995 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1996: 1632–1636
View details for Web of Science ID A1996BF95Z00359
-
Optimizing light collection from thin scintillators used in a beta-ray camera for surgical use
1995 IEEE Nuclear Science Symposium and Medical Imaging Conference
IEEE. 1996: 1796–1800
View details for Web of Science ID A1996BF95Z00393
- Miniature Nuclear Emission Imaging System for Intra-Operative Applications. In: Proceedings from UCLA International Conference on Imaging Detectors in High Energy & Astroparticle Physics 1996: 133-47
- Optimizing Light Collection from Thin Scintillators Used in a Beta-Ray Camera for Surgical Use. IEEE Transactions on Nuclear Science, 1996; 43-3(2),: 2053-60
- Mercuric Iodide Photodetector Arrays for Gamma-Ray Imaging. Nuclear Instruments and Methods in Physics Research A, 1996; 380: 295-300
- Characterization of Fluor Concentration and Geometry in Organic Scintillators for in situ Beta Imaging. IEEE Transactions on Nuclear Science, 1996; 43-6(2): 3342-47
-
DEVELOPMENT OF A MERCURIC IODIDE DETECTOR ARRAY FOR MEDICAL IMAGING APPLICATIONS
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
1995; 366 (1): 173-182
View details for Web of Science ID A1995TG30900023
-
INVESTIGATION OF THE PHYSICAL ASPECTS OF BETA-IMAGING PROBES USING SCINTILLATING FIBERS AND VISIBLE-LIGHT PHOTON COUNTERS
1994 Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1995: 1351–57
View details for Web of Science ID A1995RP81900195
-
A MONTE-CARLO CORRECTION FOR THE EFFECT OF COMPTON-SCATTERING IN 3-D PET BRAIN IMAGING
1994 Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1995: 1181–85
View details for Web of Science ID A1995RP81900173
-
A COMPARISON OF PET DETECTOR MODULES EMPLOYING RECTANGULAR AND ROUND PHOTOMULTIPLIER TUBES
1994 Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. 1995: 1064–68
View details for Web of Science ID A1995RP81900154
- A Monte Carlo Correction for the Effect of Compton Scattering in 3-D PET Brain Imaging. . IEEE Transactions on Nuclear Science, 1995; 42-4(1, 2): 1181-1185
-
Small area, fiber coupled scintillation camera for imaging beta-ray distributions intra-operatively
Conference on Photoelectronic Detectors, Cameras, and Systems
SPIE - INT SOC OPTICAL ENGINEERING. 1995: 92–101
View details for Web of Science ID A1995BE06Y00009
- Small Area, Fiber Coupled Scintillation Camera for Imaging Beta-Ray Distributions Intra-Operatively. In: Photoelectronic Detectors, Cameras and Systems, Eds. C.B. Johnson, E.J. Fenyves, Proceedings of SPIE, the International Society for Optical Engineering, SPIE, Bellingham, WA. 1995; 2551: 92-101
- Development of a Mercuric Iodide Detector Array for Medical Imaging Applications. Nuclear Instruments and Methods in Physics Research A, 1995; 42-4(1, 2): 1181-1185
- Development of a Mercuric Iodide Detector Array for in-vivo X-Ray Imaging. Advances in X-Ray Analysis, 1995; 38: 615-24
- A Comparison of PET Detector Modules Employing Rectangular and Round Photomultiplier Tubes. IEEE Transactions on Nuclear Science, 1995; 42-4(1, 2): 1064-1068
- Investigation of the Physical Aspects of Beta Imaging Probes Using Scintillating Fibers and Visible Light Photon Counters. IEEE Transactions on Nuclear Science, 1995; 42-4(1, 2): 1351-1357
-
Investigation of the physical aspects of beta imaging probes using scintillating fibers and visible light photon counters
1994 Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
I E E E. 1994: 1380–1384
View details for Web of Science ID A1994BD85P00284
-
A Monte Carlo correction for compton scattering effects in 3D pet brain imaging
1994 Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
I E E E. 1994: 1502–1506
View details for Web of Science ID A1994BD85P00311