Zev Granowitz
Ph.D. Student in Mechanical Engineering, admitted Summer 2021
Bio
Zev Granowitz is a PhD candidate in Mechanical Engineering in the Hanson Research Group at the High Temperature Gasdynamics Laboratory, advised by Prof. Ronald K. Hanson. His research develops laser and lamp absorption spectroscopy techniques for high-temperature and nonequilibrium gases, with applications in hypersonic flight and atmospheric entry. He leads the development of a new broadband laser absorption technique for shock tube experiments. Earlier work includes laser absorption measurements of temperature and enthalpy in the NASA Ames arc jet and shock tube measurements of excited atomic nitrogen. He received a BS in Mechanical Engineering, summa cum laude, from Lafayette College in 2021 and held an NDSEG Fellowship from 2023 to 2026.
Honors & Awards
-
National Defense Science and Engineering Graduate (NDSEG) Fellowship, U.S. Department of Defense (2023 to 2026)
-
Mechanical Engineering Department Fellowship, Stanford University (2021 to 2022)
-
Mechanical Engineering Faculty Award, Lafayette College (2021)
-
Mechanical Engineering Student Award, Lafayette College (2021)
-
Phi Beta Kappa, Phi Beta Kappa Society, Lafayette College
-
Tau Beta Pi, Tau Beta Pi Association, Lafayette College
Education & Certifications
-
MS, Stanford University, Mechanical Engineering (2023)
-
BS, summa cum laude, with Honors, Lafayette College, Mechanical Engineering (2021)
Service, Volunteer and Community Work
-
Board of Directors (2025 to 2026), Hillel at Stanford
Board member of the Jewish student life organization at Stanford, selected following graduate community organizing work.
Location
Stanford, CA
-
School of Engineering Representative and Co-Treasurer (2024 to 2025), Stanford University Graduate Student Council
Restructured the student club funding process and allocated over $1 million across student organizations.
Location
Stanford, CA
Personal Interests
Ultimate frisbee, running, and social dance.
Projects
-
faBolus (2026 to present), faBolus open-source project
Co-created and leads faBolus (faBolus.org), an open-source app that lets people with type 1 diabetes dose insulin and read glucose from an iPhone or Garmin watch instead of handling their Tandem t:slim X2 pump. Directs LLM coding agents that write the implementation, and owns requirements, architecture, safety review, evaluation design, and documentation. Not a medical device and not FDA cleared.
Location
Stanford, CA
Work Experience
-
Engineering Consultant (2022 to 2024), Exhalos
Consulted on development of a neonatal breath monitoring device for early detection of necrotizing enterocolitis. Developed firmware and supported hardware development for the prototype taken into clinical trials, and advised on gas sampling design and sensor selection for the breath analysis path.
Location
Stanford, CA
-
Mechanical Engineering Intern (2020), ExxonMobil Global Projects, Unconventional Projects
Reevaluated the design of compressor stations against historical cost and engineering data and identified $1 million in savings. Built a Spotfire analysis from requirements gathered with mechanics, project engineers, and operations staff.
Location
Midland, TX
-
Mechanical Engineering Co-Op (2019), Lutron Electronics, Window Systems Engineering and Product Support
Led a $250,000 value-add project covering duplication and design of new tooling, modeled in PTC Creo and coordinated across multiple manufacturing facilities. Automated torque and cycle-time calculations for window shade orders in Python and VBA.
Location
Coopersburg, PA
All Publications
-
Empirical and theoretical values of Stark shift and broadening parameters for excited states of O, Ar, and Xe
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER
2026; 361
View details for DOI 10.1016/j.jqsrt.2026.110005
View details for Web of Science ID 001786652700001
-
Pathlength-Amplified Tunable Diode Laser Absorption Spectroscopy of the Excitation and Ionization of Air in a Shock Tube
AIAA SciTech 2026 Forum
2026
View details for DOI 10.2514/6.2026-2265
-
Temperature and Enthalpy Characterization of NASA Arcjet Using Oxygen and Nitrogen Absorption
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER
2025
View details for DOI 10.2514/1.T7088
View details for Web of Science ID 001466756400001
-
Simultaneous, Pathlength-Amplified Laser Absorption Measurements of Excited Air Species in a Shock Tube
AIAA SciTech 2025 Forum
2025
View details for DOI 10.2514/6.2025-1995
-
Assessment of Axial Variations of Temperature and Enthalpy in a NASA Arc Jet Using Laser Absorption of Atomic Oxygen and Nitrogen
34th International Symposium on Shock Waves (ISSW34)
2025: 227-237
View details for DOI 10.1007/978-981-96-4767-5_20
-
Shock Tube ARAS Measurements of N(2D) and N(2P) in 5100 K to 6400 K Nitrogen-Argon Mixtures
AIAA SciTech 2025 Forum
2025
View details for DOI 10.2514/6.2025-2614
-
Simulations of Non-Equilibrium Air Chemistry Compared To Hypersonic Wind Tunnel Experiments
AMER INST AERONAUTICS & ASTRONAUTICS. 2024
View details for Web of Science ID 001375987902032
-
Shock-Tube Measurements of Atomic Nitrogen Collisional Excitation in 8000-12000 K Partially Ionized Nitrogen-Argon Mixtures.
The journal of physical chemistry. A
2023
Abstract
We report on shock-tube experiments measuring the collisional excitation of atomic nitrogen using tunable diode laser absorption spectroscopy (TDLAS). Conditions behind the reflected shocks ranged from 8000 to 12000 K and 0.1 to 1.1 atm in mixtures of 1 or 2% molecular nitrogen (N2) in argon (Ar). Absorption from the transition between atomic nitrogen quantum states 4P to 4D at 868 nm was used to monitor the formation of electronically excited nitrogen. Population measurements of the 4P state were made at a rate of 50 kHz. In connection with these measurements, a multitemperature kinetic mechanism is proposed for nitrogen excitation. Measurements suggest a multistage process. In early test times, a period of induction due to N2 dissociation is followed by a rise via heavy particle excitation. The dominant channel causing this excitation is believed to be N + N N(4P) + N with a measured forward rate constant of 3.65 * 10-18 exp(-119892/T) [m3/s]. As test time evolves, the excitation of 4P, referred to as N*, is subsequently interrupted and then resumes, as the kinetic environment becomes increasingly electron-dominated. The most impactful reactions of the mechanism are optimized to reduce the residual between simulations and the measurements. The measured N* populations indicate strong, though indirect, sensitivity to adjacent processes, including the excitation of metastable nitrogen, and ionization channels.
View details for DOI 10.1021/acs.jpca.2c07839
View details for PubMedID 36745871
-
Measurements of Temperature and Enthalpy in NASA Ames 60-MW Arcjet using Atomic Oxygen and Atomic Nitrogen Absorption
AMER INST AERONAUTICS & ASTRONAUTICS. 2023
View details for DOI 10.2514/6.2023-2333
View details for Web of Science ID 001415200200154
-
Near-Body Measurements in Hypersonic Wedge Flows in the T5 Reflected Shock Tunnel by Tunable Diode Laser Absorption Spectroscopy
AIAA SciTech 2023 Forum
2023
View details for DOI 10.2514/6.2023-2518
https://orcid.org/0000-0001-8882-6752