Mechanical Engineering
Showing 151-200 of 593 Results
-
Vivian Feig
Assistant Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Feig lab aims to develop low-cost, noninvasive, and widely-accessible medical technologies that integrate seamlessly with the human body. We accomplish this by developing functional materials and devices with dynamic mechanical properties, leveraging chemistry and physics insights to engineer novel systems at multiple length scales. In pursuit of our goals, we maintain a strong emphasis on integrity and diversity, while nurturing the intellectual curiosity and holistic growth of our team members as researchers, communicators, and leaders.
-
Tim Flint
Ph.D. Student in Mechanical Engineering, admitted Autumn 2017
BioI am a PhD candidate in the Department of Mechanical Engineering at Stanford University working with Professor Parviz Moin . My PhD research is on the receptivity of the flow field around high-speed bodies. I hope to understand how free-stream disturbances excite instabilities that may grow and become relevant to boundary layer transition in high-speed flight.
-
Sean Follmer
Associate Professor of Mechanical Engineering and, by courtesy, of Computer Science
Current Research and Scholarly InterestsHuman Computer Interaction, Haptics, Robotics, Human Centered Design
-
Lorenza Garau Paganella
Postdoctoral Scholar, Mechanical Engineering
BioLorenza was born in Italy in 1997 and is currently a postdoctoral fellow at Stanford University with Prof. Chaudhuri, supported by an SNSF fellowship. Her research focuses on engineering biomaterials to investigate cell–extracellular matrix interactions and mechanotransduction in 2D and 3D cell cultures, aiming to advance biomedical understanding of tissue remodeling and disease.
Lorenza obtained her PhD (2024) in Mechanical and Process Engineering from ETH Zurich, where she developed hydrogel scaffolds and protocols for protein isolation to study cell behavior in engineered microenvironments.
Before her PhD, Lorenza completed her MSc at ETH Zurich and BSc at University of Trieste in Process Engineering, graduating both cum laude. During this time her focus was on biomaterials for drug delivery which she complemented with an internship in Roche. She has worked in interdisciplinary teams combining engineering and biology and is motivated by research that bridges fundamental science with clinical impact. -
J. Christian Gerdes
Professor of Mechanical Engineering, Emeritus
BioChris Gerdes is a Professor Emeritus of Mechanical Engineering at Stanford University. His laboratory studies how cars move, how humans drive cars and how to design future cars that work cooperatively with the driver or drive themselves. Vehicles in the lab include X1, a student-built electric, steer-by-wire test vehicle; Takumi, a modified Toyota Supra capable of autonomous drifting in tandem with another car; and Marty, the electrified, automated, drifting DeLorean. Chris' interests in vehicle safety extend to ethics and government policy, having helped to develop the US Federal Automated Vehicle Policy while serving as the first Chief Innovation Officer of the US Department of Transportation.
-
Siegfried Glenzer
Professor of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsPlease see our website for detailed information: https://heds.slac.stanford.edu
-
Abeynaya Gnanasekaran
Research Advisor, Mechanical Engineering - Mechanics and Computation
BioI am a PhD student in the Institute for Computational and Mathematical Engineering. My research interests lie in Numerical Linear Algebra and Parallel Computing. I'm working with Prof. Eric Darve on developing fast algorithms for general linear systems. I obtained my B.Tech (Honors) in Chemical Engineering from Indian Institute of Technology Madras, India.
I was born and brought up in Neyveli, an industrial town in south India. I enjoy listening to Indian music and reading novels. -
Kenneth Goodson
Vice Provost for Graduate Education and Postdoctoral Affairs, Davies Family Provostial Professor, and Professor, by courtesy, of Materials Science and Engineering
Current Research and Scholarly InterestsProf. Goodson’s Nanoheat Lab studies heat transfer in electronic nanostructures, microfluidic heat sinks, and packaging, focussing on basic transport physics and practical impact for industry. We work closely with companies on novel cooling and packaging strategies for power devices, portables, ASICs, & data centers. At present, sponsors and collaborators include ARPA-E, the NSF POETS Center, SRC ASCENT, Google, Intel, Toyota, Ford, among others.
-
Catherine Gorle
Associate Professor of Civil and Environmental Engineering and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsGorle's research focuses on the development of predictive flow simulations to support the design of sustainable buildings and cities. Specific topics of interest are the coupling of large- and small-scale models and experiments to quantify uncertainties related to the variability of boundary conditions, the development of uncertainty quantification methods for low-fidelity models using high-fidelity data, and the use of field measurements to validate and improve computational predictions.
-
Wendy Gu
Associate Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Gu Group studies the mechanical behavior and advanced fabrication of metals and ceramics. Current areas of research include the mechanics of solid-state battery materials, soft magnetic alloys and composites, and structural alloys in extreme environments.
-
Angel Gunaman
Undergraduate, Management Science and Engineering
Undergraduate, Mechanical EngineeringBioI'm a Mechanical Engineering major at Stanford, concentrating in Product Realization and minoring in Management Science & Engineering. I'm passionate about building meaningful technology and have experience in engineering research, product development, and public sector infrastructure.
-
Shivani Guptasarma
Ph.D. Student in Mechanical Engineering, admitted Autumn 2019
BioShivani Guptasarma is a PhD student at the Assistive Robotics and Manipulation (ARM) Lab, where she studies the control of robotic upper limb prostheses. She is a recipient of graduate fellowships from the Knight-Hennessy Scholars and the Wu Tsai Human Performance Alliance at Stanford. She obtained her Bachelors and Masters degrees at the Department of Engineering Design at the Indian Institute of Technology Madras in Chennai, India.
-
Turgut M Gür
Adjunct Professor, Materials Science and Engineering
Npl Research Liaison, Mechanical Engineering - DesignBioTurgut M. Gür is an Adjunct Professor of Materials Science and Engineering at Stanford University, where he recently retired after a distinguished career that included technical and management leadership for three major multi-disciplinary team-based research centers on campus focused on advanced materials and energy conversion and storage, namely, the DOE-EFRC Center on Nanostructuring for Efficient Energy Conversion (CNEEC), the NSF-MRSEC Center for Materials Research (CMR), and Geballe Laboratory for Advanced Materials (GLAM).
Currently, he is the President of The Electrochemical Society and chairs its Board of Directors and several other ECS committees. He is also an inducted Fellow of The Electrochemical Society.
In addition, he holds a Visiting Professor appointment from the Chinese University of Mining and Technology-Beijing (CUMTB) in China, and an "international mentor" appointment from the Norwegian University of Science and Technology (NTNU) in Trondheim, Norway.
He is an internationally recognized leader in high temperature electrochemical energy conversion and storage technologies, materials and processes with 11 US issued patents, 17 (published) patent applications, and 165 technical publications, largely related to energy conversion processes and materials including fuel cells, electrocatalysis, electrosynthesis, coal and hydrocarbon conversion, hydrogen production, and sensors and membranes. He has made nearly 150 oral presentations in national and international conferences, given 85 invited lectures, talks and colloquia, co-organized 24 international conferences and symposia, and co- edited 18 transaction volumes and proceedings.
In 2020, out of more than 186,000 energy scientists in the world, he is ranked the 702nd most cited energy researcher, and is also rated in the top 1% of most cited among all scientists in the world across all scholarly fields of sciences, engineering and medicine (https://journals.plos.org/plosbiology/article?id=10.1371/journal.pbio.3000918). Recently, he is also ranked in the top 5% of cited researcher in RSC journals by The Royal Society of Chemistry.
As an entrepreneur, he was involved in developing advanced technologies in several start-up companies developing supercapacitors, chemically assisted spontaneous production of hydrogen via steam electrolysis, carbon fuel cells for efficient conversion of coal, biomass and other solid fuels to electricity with total carbon capture, and industrial wastewater treatment based on electrochemical remediation by selective reduction and capacitive deionization.
He has served in top leadership positions on the boards of several professional societies as well as industrial and non-profit organizations. He has been on the Board of Directors of The Electrochemical Society for 6 years and was the Chair of the High Temperature Energy Materials and Processes division of the Society. Previously, he had served 3 terms on the Board of the International Society for Solid State Ionics (ISSI), which is another leading global society for scientists in electrochemical energy conversion and storage. Formerly, he was an Associate Editor of the Journal of the American Ceramic Society (2002-2014), and the editor for Solid State Ionics Letters (1998-2002).
He also volunteers his time as a Board Trustee and the former Vice President of the Turkish Educational Foundation, a charitable non-profit organization in the San Francisco Bay Area in California, USA, that provides financial support, scholarships and educational assistance annually to 2400 needy students in Turkey.
He holds BSc and MSc degrees in Chemical Engineering from the Middle East Technical University in Ankara, Turkey, and three graduate degrees including a Ph.D. in Materials Science and Engineering from Stanford University. -
Kai Douglas Hammond
Undergraduate, Mechanical Engineering
BioClass of 2027. Stanford Undergraduate majoring in Mechanical Engineering.
-
Ronald Hanson
Clarence J. and Patricia R. Woodard Professor of Mechanical Engineering
Current Research and Scholarly InterestsProfessor Hanson has been an international leader in the development of laser-based diagnostic methods for combustion and propulsion, and in the development of modern shock tube methods for accurate determination of chemical reaction rate parameters needed for modeling combustion and propulsion systems. He and his students have made several pioneering contributions that have impacted the pace of propulsion research and development worldwide.
-
Zichen He
Masters Student in Mechanical Engineering, admitted Autumn 2024
BioI obtained my bachelor degrees from University of Michigan, Ann Arbor and Sichuan University in China, both in mechanical engineering. I grew up in Zhengzhou, a city in the middle of China.
-
Aoife Henry
Postdoctoral Scholar, Mechanical Engineering
BioAoife Henry earned her doctorate in Electrical, Computer & Energy Engineering at the University of Colorado, Boulder, funded by and in collaboration with the wind energy control systems team at the National Renewable Energy Laboratory (NREL). During her doctorate, she applied her joint specializations of machine learning and control systems to implement and validate forecast-enabled wind energy controllers using state-of-the-art time-series forecasting models. She is now working to commercialize and scale this technology under the wing of the Stanford Sustainability Accelerator Fellowship at the Doerr School of Sustainability.
