Michael Lepech
Professor of Civil and Environmental Engineering and Senior Fellow at the Woods Institute for the Environment
Bio
Unsustainable energy and material consumption, waste production, and emissions are some of today’s most pressing global concerns. To address these concerns, civil engineers are now designing facilities that, for example, passively generate power, reuse waste, and are carbon neutral. These designs are based foremost on longstanding engineering theory. Yet woven within this basic knowledge must be new science and new technologies, which advance the field of civil engineering to the forefront of sustainability-focused design.
My research develops fundamental engineering design concepts, models, and tools that are tightly integrated with quantitative sustainability assessment and service life modeling across length scales, from material scales to system scales, and throughout the early design, project engineering, construction, and operation life cycle phases of constructed facilities. My research follows the Sustainable Integrated Materials, Structures, Systems (SIMSS) framework. SIMSS is a tool to guide the multi-scale design of sustainable built environments, including multi-physics modeling informed by infrastructure sensing data and computational learning and feedback algorithms to support advanced digital-twinning of engineered systems. Thus, my research applies SIMMS through two complementary research thrusts; (1) developing high-fidelity quantitative sustainability assessment methods that enable civil engineers to quickly and probabilistically measure sustainability indicators, and (2) creating multi-scale, fundamental engineering tools that integrate with sustainability assessment and facilitate setting and meeting sustainability targets throughout the life cycle of constructed facilities.
Most recently, my research forms the foundation of the newly created Stanford Center at the Incheon Global Campus (SCIGC) in South Korea, a university-wide research center examining the potential for smart city technologies to enhance the sustainability of urban areas. Located in the smart city of Songdo, Incheon, South Korea, SCIGC is a unique global platform to (i) advance research on the multi-scale design, construction, and operation of sustainable built environments, (ii) demonstrate to cities worldwide the scalable opportunities for new urban technologies (e.g., dense urban sensing networks, dynamic traffic management, autonomous vehicles), and (iii) improve the sustainability and innovative capacity of increasingly smarter cities globally.
With an engineering background in civil and environmental engineering and material science (BSE, MSE, PhD), and business training in strategy and finance (MBA), I continue to explore to the intersection of entrepreneurship education, innovation capital training, and the potential of startups to more rapidly transfer and scale technologies to solve some of the world's most challenging problems.
Academic Appointments
-
Professor, Civil and Environmental Engineering
-
Senior Fellow, Stanford Woods Institute for the Environment
Administrative Appointments
-
Director (acting), Stanford Technology Ventures Program (2023 - Present)
-
Director, Stanford Center for Sustainable Development and Global Competitiveness (2019 - Present)
-
Director, Stanford Center at the Incheon Global Campus (SCIGC) in South Korea (2019 - Present)
-
Academic Director, Stanford Project Leadership Institute (PLI) (2017 - Present)
-
Academic Director, Stanford Ideas to Market Entrepreneurial Education Program (2018 - Present)
-
Academic Director, Stanford Venture Capital Unlocked VC/Angel Investing Program (2017 - Present)
-
Academic Director, Stanford Product Management Professional Certificate (2020 - Present)
Honors & Awards
-
CAREER Award, US National Science Foundation (2015)
Boards, Advisory Committees, Professional Organizations
-
Executive Committee Member, Stanford-Thailand Research Consortium (2018 - Present)
-
Executive Committee Member, Stanford Science, Technology, and Society (STS) Program (2019 - Present)
-
Executive Committee Member, Stanford Urban Studies Program (2018 - Present)
-
Executive Committee Member, Emmett Interdisciplinary Program in Environment and Resources (E-IPER) (2021 - Present)
Program Affiliations
-
Science, Technology and Society
Professional Education
-
MBA, University of Michigan, Finance and Strategy (2008)
-
PhD, University of Michigan, Civil and Environmental Engineering (2006)
2024-25 Courses
- Damage and Failure Mechanics of Structural Systems
CEE 305 (Spr) - Emerson Consequential Scholars
CEE 246F (Aut) - Engineering Economics and Sustainability
CEE 146S, ENGR 60 (Aut, Win, Spr) - Global Entrepreneurship Workshop
CEE 121, CEE 221 (Aut) - Life Cycle Assessment for Complex Systems
CEE 226 (Aut) -
Independent Studies (11)
- Advanced Engineering Problems
CEE 399 (Aut, Win, Spr, Sum) - Directed Reading in Environment and Resources
ENVRES 398 (Aut, Win, Spr, Sum) - Directed Reading or Special Studies in Civil Engineering
CEE 198 (Aut, Win, Spr, Sum) - Directed Research in Environment and Resources
ENVRES 399 (Aut, Win, Spr, Sum) - Independent Project in Civil and Environmental Engineering
CEE 199L (Aut, Win, Spr, Sum) - Independent Project in Civil and Environmental Engineering
CEE 299L (Aut, Win, Spr, Sum) - Independent Study in Civil Engineering for CEE-MS Students
CEE 299 (Aut, Win, Spr, Sum) - Report on Civil Engineering Training
CEE 398 (Aut, Win, Spr, Sum) - Sustainable Development Studio
CEE 224A (Aut, Win) - Undergraduate Honors Thesis
CEE 199H (Aut, Win, Spr, Sum) - Undergraduate Research in Civil and Environmental Engineering
CEE 199 (Aut, Win, Spr, Sum)
- Advanced Engineering Problems
-
Prior Year Courses
2023-24 Courses
- Accounting, Finance & Valuation for Engineers & Constructors
CEE 244 (Sum) - Damage and Failure Mechanics of Structural Systems
CEE 305 (Spr) - Engineering Economics and Sustainability
CEE 146S, ENGR 60 (Aut, Spr, Sum) - Global Korea: Understanding the Nexus of Innovation, Culture, and Media
CEE 121, CEE 221 (Aut, Spr) - Life Cycle Assessment for Complex Systems
CEE 226 (Aut)
2022-23 Courses
- Accounting, Finance & Valuation for Engineers & Constructors
CEE 244 (Sum) - Climate and Sustainability Fellows Seminar
CEE 246D (Spr) - Damage and Failure Mechanics of Structural Systems
CEE 305 (Spr) - Engineering Economics and Sustainability
CEE 146S, ENGR 60 (Aut, Spr, Sum) - Global Korea: Understanding the Nexus of Innovation, Culture, and Media
CEE 121, CEE 221 (Aut, Win, Spr) - Life Cycle Assessment for Complex Systems
CEE 226 (Aut)
2021-22 Courses
- Accounting, Finance & Valuation for Engineers & Constructors
CEE 244 (Sum) - Damage and Failure Mechanics of Structural Systems
CEE 305 (Spr) - Engineering Economics and Sustainability
CEE 146S, ENGR 60 (Aut, Spr, Sum) - Global Korea: Understanding the Nexus of Innovation, Culture, and Media
CEE 121, CEE 221 (Win) - Life Cycle Assessment for Complex Systems
CEE 226 (Aut)
- Accounting, Finance & Valuation for Engineers & Constructors
Stanford Advisees
-
Doctoral Dissertation Reader (AC)
Dinesh Moorjani, Giulia Scagliotti -
Postdoctoral Faculty Sponsor
Summer Jung, Okkeun Lee -
Doctoral Dissertation Advisor (AC)
Yirong Chen, Tess Hegarty, Jason Hernandez, Andrew Lesh, Barney Miao -
Master's Program Advisor
James Anderson, Yueer Cai, Samson Chau, Ningyan Chen, Rachel Chen, Camilo Colorado, Natalie Gonzalez, Haodong He, Anthony Hellen, Darius Javan, Hazel Kim, Hegene Lee, Hyun Woo Lee, Yi Lu, Brian Ma, Kiana Mokrian, Patrick Nieman, Fabian Santillan, Kevin Wright, Bobby de Luna -
Doctoral (Program)
Yirong Chen, Jason Hernandez, Andrew Lesh, Barney Miao, Farah Shahbaz, Muran Yu
All Publications
-
Development of a multiphysics model of synergistic effects between environmental exposure and damage in woven glass fiber reinforced polymeric composites
COMPOSITE STRUCTURES
2021; 258
View details for DOI 10.1016/j.compstruct.2020.113230
View details for Web of Science ID 000609372900002
-
Micromechanics modeling and homogenization of glass fiber reinforced polymer composites subject to synergistic deterioration
COMPOSITES SCIENCE AND TECHNOLOGY
2021; 203
View details for DOI 10.1016/j.compscitech.2020.108629
View details for Web of Science ID 000608630700031
-
How "Belt and Road" initiative implementation has influenced R&D outcomes of Chinese enterprises: asset-exploitation or knowledge transfer?
R & D MANAGEMENT
2020
View details for DOI 10.1111/radm.12445
View details for Web of Science ID 000591439500001
-
Incorporating pavement deterioration uncertainty into pavement management optimization
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING
2020
View details for DOI 10.1080/10298436.2020.1837827
View details for Web of Science ID 000586083600001
-
Prediction of micrometeoroid damage to lunar construction materials using numerical modeling of hypervelocity impact events
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2020; 138
View details for DOI 10.1016/j.ijimpeng.2020.103499
View details for Web of Science ID 000514015800012
-
A novel approach to district heating and cooling network design based on life cycle cost optimization
ENERGY
2020; 194
View details for DOI 10.1016/j.energy.2019.116837
View details for Web of Science ID 000519654200055
-
Hypervelocity Impact Performance of Biopolymer-Bound Soil Composites for Space Construction
JOURNAL OF AEROSPACE ENGINEERING
2020; 33 (2)
View details for DOI 10.1061/(ASCE)AS.1943-5525.0001110
View details for Web of Science ID 000507897200001
-
Incorporating multi-physics deterioration analysis in building information modeling for life-cycle management of durability performance
AUTOMATION IN CONSTRUCTION
2020; 110
View details for DOI 10.1016/j.autcon.2019.103004
View details for Web of Science ID 000517664900002
-
On Designing Biopolymer-Bound Soil Composites (BSC) for Peak Compressive Strength
JOURNAL OF RENEWABLE MATERIALS
2020; 8 (8): 845–61
View details for DOI 10.32604/jrm.2020.09844
View details for Web of Science ID 000549493600001
-
Prediction of ultimate compressive strength for biopolymer-bound soil composites (BSC) using sliding wingtip crack analysis
ENGINEERING FRACTURE MECHANICS
2019; 218
View details for DOI 10.1016/j.engfracmech.2019.106570
View details for Web of Science ID 000483383200009
-
PROBABILISTIC DESIGN OF SUSTAINABLE REINFORCED CONCRETE INFRASTRUCTURE REPAIRS USING SIPMATH
IEEE. 2019: 3104–15
View details for Web of Science ID 000529791402085
-
Finite element models of reinforced ECC beams subjected to various cyclic deformation
COMPUTERS AND CONCRETE
2018; 22 (3): 305–17
View details for DOI 10.12989/cac.2018.22.3.305
View details for Web of Science ID 000446078200005
-
Experimental Testing of Reinforced ECC Beams Subjected to Various Cyclic Deformation Histories
JOURNAL OF STRUCTURAL ENGINEERING
2018; 144 (6)
View details for DOI 10.1061/(ASCE)ST.1943-541X.0002034
View details for Web of Science ID 000431120500012
-
Scaling Impact Crater Dimensions to Predict Micrometeorite Damage of Biopolymer-Stabilized Regolith
AMER SOC CIVIL ENGINEERS. 2018: 612–20
View details for Web of Science ID 000462200100058
-
Probabilistic Design of Environmentally Sustainable Reinforced-Concrete Transportation Infrastructure Incorporating Maintenance Optimization
JOURNAL OF INFRASTRUCTURE SYSTEMS
2017; 23 (3)
View details for DOI 10.1061/(ASCE)IS.1943-555X.0000345
View details for Web of Science ID 000400524200006
-
Development of time-dependent fragility functions for deteriorating reinforced concrete bridge piers
STRUCTURE AND INFRASTRUCTURE ENGINEERING
2017; 13 (1): 67-83
View details for DOI 10.1080/15732479.2016.1198401
View details for Web of Science ID 000384219400007
-
Simplified structural deterioration model for reinforced concrete bridge piers under cyclic loading
STRUCTURE AND INFRASTRUCTURE ENGINEERING
2017; 13 (1): 55-66
View details for DOI 10.1080/15732479.2016.1198402
View details for Web of Science ID 000384219400006
-
Influence of carbon feedstock on potentially net beneficial environmental impacts of bio-based composites
JOURNAL OF CLEANER PRODUCTION
2016; 132: 266-278
View details for DOI 10.1016/j.jclepro.2015.11.047
View details for Web of Science ID 000380624400022
-
Modeling and optimization of building mix and energy supply technology for urban districts
APPLIED ENERGY
2015; 159: 161-177
View details for DOI 10.1016/j.apenergy.2015.08.076
View details for Web of Science ID 000364880900016
-
Cradle-to-gate sustainable target value design: integrating life cycle assessment and construction management for buildings
JOURNAL OF CLEANER PRODUCTION
2015; 100: 107-115
View details for DOI 10.1016/j.jclepro.2015.03.044
View details for Web of Science ID 000356191400009
-
Sustainability Assessment of Protein-Soil Composite Materials for Limited Resource Environments
JOURNAL OF RENEWABLE MATERIALS
2015; 3 (3): 183-194
View details for DOI 10.7569/JRM.2015.634107
View details for Web of Science ID 000365669800004
-
Integrating durability-based service-life predictions with environmental impact assessments of natural fiber-reinforced composite materials
RESOURCES CONSERVATION AND RECYCLING
2015; 99: 72-83
View details for DOI 10.1016/j.resconrec.2015.04.004
View details for Web of Science ID 000356735500008
-
Static versus Time-Dependent Material Selection Charts and Application in Wood Flour Composites
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY
2015; 9 (2): 273-283
View details for DOI 10.1166/jbmb.2015.1517
View details for Web of Science ID 000358624400021
-
Techno-Ecological Synergy: A Framework for Sustainable Engineering
ENVIRONMENTAL SCIENCE & TECHNOLOGY
2015; 49 (3): 1752-1760
Abstract
Even though the importance of ecosystems in sustaining all human activities is well-known, methods for sustainable engineering fail to fully account for this role of nature. Most methods account for the demand for ecosystem services, but almost none account for the supply. Incomplete accounting of the very foundation of human well-being can result in perverse outcomes from decisions meant to enhance sustainability and lost opportunities for benefiting from the ability of nature to satisfy human needs in an economically and environmentally superior manner. This paper develops a framework for understanding and designing synergies between technological and ecological systems to encourage greater harmony between human activities and nature. This framework considers technological systems ranging from individual processes to supply chains and life cycles, along with corresponding ecological systems at multiple spatial scales ranging from local to global. The demand for specific ecosystem services is determined from information about emissions and resource use, while the supply is obtained from information about the capacity of relevant ecosystems. Metrics calculate the sustainability of individual ecosystem services at multiple spatial scales and help define necessary but not sufficient conditions for local and global sustainability. Efforts to reduce ecological overshoot encourage enhancement of life cycle efficiency, development of industrial symbiosis, innovative designs and policies, and ecological restoration, thus combining the best features of many existing methods. Opportunities for theoretical and applied research to make this framework practical are also discussed.
View details for DOI 10.1021/es5041442
View details for Web of Science ID 000349060300063
View details for PubMedID 25560912
-
Impact of progressive sustainable target value assessment on building design decisions
BUILDING AND ENVIRONMENT
2015; 85: 52-60
View details for DOI 10.1016/j.buildenv.2014.11.011
View details for Web of Science ID 000350184900006
-
Sustainable target value design: integrating life cycle assessment and target value design to improve building energy and environmental performance
JOURNAL OF CLEANER PRODUCTION
2015; 88: 43-51
View details for DOI 10.1016/j.jclepro.2014.03.025
View details for Web of Science ID 000347771100005
-
Incorporating spatiotemporal effects and moisture diffusivity into a multi-criteria materials selection methodology for wood-polymer composites
CONSTRUCTION AND BUILDING MATERIALS
2014; 71: 589-601
View details for DOI 10.1016/j.conbuildmat.2014.08.049
View details for Web of Science ID 000345475300063
-
A multi-objective feedback approach for evaluating sequential conceptual building design decisions
AUTOMATION IN CONSTRUCTION
2014; 45: 136-150
View details for DOI 10.1016/j.autcon.2014.04.015
View details for Web of Science ID 000347745800014
-
Firm-level ecosystem service valuation using mechanistic biogeochemical modeling and functional substitutability
ECOLOGICAL ECONOMICS
2014; 100: 63-73
View details for DOI 10.1016/j.ecolecon.2014.01.014
View details for Web of Science ID 000334132600006
-
Probabilistic design and management of environmentally sustainable repair and rehabilitation of reinforced concrete structures
CEMENT & CONCRETE COMPOSITES
2014; 47: 19-31
View details for DOI 10.1016/j.cemconcomp.2013.10.009
View details for Web of Science ID 000331686900004
-
Application of multi-criteria material selection techniques to constituent refinement in biobased composites
MATERIALS & DESIGN
2013; 52: 1043-1051
View details for DOI 10.1016/j.matdes.2013.06.046
View details for Web of Science ID 000323832200122
-
Behavior of Concrete and ECC Structures under Simulated Earthquake Motion
JOURNAL OF STRUCTURAL ENGINEERING-ASCE
2013; 139 (3): 389-399
View details for DOI 10.1061/(ASCE)ST.1943-541X.0000667
View details for Web of Science ID 000316701000008
-
Network-Level Pavement Asset Management System Integrated with Life-Cycle Analysis and Life-Cycle Optimization
JOURNAL OF INFRASTRUCTURE SYSTEMS
2013; 19 (1): 99-107
View details for DOI 10.1061/(ASCE)IS.1943-555X.0000093
View details for Web of Science ID 000316563500010
-
Application of life-cycle assessment to early stage building design for reduced embodied environmental impacts
BUILDING AND ENVIRONMENT
2013; 60: 81-92
View details for DOI 10.1016/j.buildenv.2012.11.009
View details for Web of Science ID 000314734800008
-
Improvement in environmental performance of poly(beta-hydroxybutyrate)-co-(beta-hydroxyvalerate) composites through process modifications
JOURNAL OF CLEANER PRODUCTION
2013; 40: 190-198
View details for DOI 10.1016/j.jclepro.2012.08.033
View details for Web of Science ID 000312173200022
-
Durability of strain-hardening cement-based composites (SHCC)
MATERIALS AND STRUCTURES
2012; 45 (10): 1447-1463
View details for DOI 10.1617/s11527-012-9845-y
View details for Web of Science ID 000307539400002
-
Cradle-to-Gate Life Cycle Assessment for a Cradle-to-Cradle Cycle: Biogas-to-Bioplastic (and Back)
ENVIRONMENTAL SCIENCE & TECHNOLOGY
2012; 46 (18): 9822-9829
Abstract
At present, most synthetic organic materials are produced from fossil carbon feedstock that is regenerated over time scales of millions of years. Biobased alternatives can be rapidly renewed in cradle-to-cradle cycles (1-10 years). Such materials extend landfill life and decrease undesirable impacts due to material persistence. This work develops a LCA for synthesis of polyhydroxybutyrate (PHB) from methane with subsequent biodegradation of PHB back to biogas (40-70% methane, 30-60% carbon dioxide). The parameters for this cradle-to-cradle cycle for PHB production are developed and used as the basis for a cradle-to-gate LCA. PHB production from biogas methane is shown to be preferable to its production from cultivated feedstock due to the energy and land required for the feedstock cultivation and fermentation. For the PHB-methane cycle, the major challenges are PHB recovery and demands for energy. Some or all of the energy requirements can be satisfied using renewable energy, such as a portion of the collected biogas methane. Oxidation of 18-26% of the methane in a biogas stream can meet the energy demands for aeration and agitation, and recovery of PHB synthesized from the remaining 74-82%. Effective coupling of waste-to-energy technologies could thus conceivably enable PHB production without imported carbon and energy.
View details for DOI 10.1021/es204541w
View details for Web of Science ID 000308787800002
View details for PubMedID 22775327
-
Human Health Impact as a Boundary Selection Criterion in the Life Cycle Assessment of Pultruded Fiber Reinforced Polymer Composite Materials
JOURNAL OF INDUSTRIAL ECOLOGY
2012; 16 (2): 266-275
View details for DOI 10.1111/j.1530-9290.2011.00416.x
View details for Web of Science ID 000302534800010
-
Project-Level Assessment of Environmental Impact: Ecosystem Services Approach to Sustainable Management and Development
JOURNAL OF MANAGEMENT IN ENGINEERING
2012; 28 (1): 5-12
View details for DOI 10.1061/(ASCE)ME.1943-5479.0000093
View details for Web of Science ID 000300439100003
-
Multi-objective building envelope optimization for life-cycle cost and global warming potential
9th European Conference on Product and Process Modelling
CRC PRESS-TAYLOR & FRANCIS GROUP. 2012: 193–200
View details for Web of Science ID 000337164500027
-
Structural modeling of corroded reinforced concrete bridge columns
6th International Conference on Bridge Maintenance, Safety and Management (IABMAS)
CRC PRESS-TAYLOR & FRANCIS GROUP. 2012: 1008–1014
View details for Web of Science ID 000328502801053
-
USING LIFE CYCLE ASSESSMENT METHODS TO GUIDE ARCHITECTURAL DECISION-MAKING FOR SUSTAINABLE PREFABRICATED MODULAR BUILDINGS
JOURNAL OF GREEN BUILDING
2012; 7 (3): 151-170
View details for Web of Science ID 000322715200010
-
ECOLOGICAL PAYBACK TIME OF AN ENERGY-EFFICIENT MODULAR BUILDING
JOURNAL OF GREEN BUILDING
2012; 7 (1): 100-119
View details for Web of Science ID 000303729200008
-
A Framework for Multiphysics Modeling of Natural Environments for Valuation of Privately Owned Ecosystem Services
IEEE International Symposium on Sustainable Systems and Technology (ISSST)
IEEE. 2011
View details for Web of Science ID 000297353100064
-
INTEGRATED PROBABILISTIC LIFE CYCLE ASSESSMENT AND DURABILITY DESIGN FOR SUSTAINABLE SHCC INFRASTRUCTURE
2nd International RILEM Conference on Strain Hardening Cementitious Composites (SHCC2-Rio)
R I L E M PUBLICATIONS. 2011: 157–164
View details for Web of Science ID 000309322600019
-
Life-Cycle Optimization of Pavement Overlay Systems
JOURNAL OF INFRASTRUCTURE SYSTEMS
2010; 16 (4): 310-322
View details for DOI 10.1061/(ASCE)IS.1943-555X.0000042
View details for Web of Science ID 000284277500010
-
Dynamic Life-Cycle Modeling of Pavement Overlay Systems: Capturing the Impacts of Users, Construction, and Roadway Deterioration
JOURNAL OF INFRASTRUCTURE SYSTEMS
2010; 16 (4): 299-309
View details for DOI 10.1061/(ASCE)IS.1943-555X.0000017
View details for Web of Science ID 000284277500009
-
Design of Sustainable Pavements Using Probabilistic LCA/Durability Design
Proceedings of International Workshop on Energy and Environment in the Development of Sustainable Asphalt Pavements
XIAN JIAOTUNG UNIV PRESS. 2010: 16–21
View details for Web of Science ID 000283200900006
-
Improving infrastructure sustainability using nanoparticle engineered cementitious composites
International Conference on Advanced Concrete Materials (ACM)
CRC PRESS-TAYLOR & FRANCIS GROUP. 2010: 153–161
View details for Web of Science ID 000353964900020
-
Time varying risk modeling of deteriorating bridge infrastructure for sustainable infrastructure design
5th International Conference on Bridge Maintenance, Safety and Management (IABMAS)
CRC PRESS-TAYLOR & FRANCIS GROUP. 2010: 2501–2508
View details for Web of Science ID 000320615004038
-
Water permeability of engineered cementitious composites
CEMENT & CONCRETE COMPOSITES
2009; 31 (10): 744-753
View details for DOI 10.1016/j.cemconcomp.2009.07.002
View details for Web of Science ID 000271850300007
-
Application of ECC for bridge deck link slabs
MATERIALS AND STRUCTURES
2009; 42 (9): 1185-1195
View details for DOI 10.1617/s11527-009-9544-5
View details for Web of Science ID 000270841100003
-
Introduction of Transition Zone Design for Bridge Deck Link Slabs Using Ductile Concrete
ACI STRUCTURAL JOURNAL
2009; 106 (1): 96-105
View details for Web of Science ID 000262291800011
- Transition Zone Analysis and Design for Bridge Deck Link Slabs using Ductile Concrete ACI Structural Journal 2009; 1 (106): 96-105
- Sustainable Infrastructure Systems using Engineered Cementitious Composites 2009
- Treatment of Uncertainties in Life Cycle Assessment 2009
- Improving Infrastructure Sustainability using Nanoparticle Engineered Cementitious Composites 2009
- Autogenous Healing of Engineered Cementitious Composites Under Wet-Dry Cycles Journal of Cement and Concrete Research 2009; 39: 382-390
-
Design of Green Engineered Cementitious Composites for Improved Sustainability
ACI MATERIALS JOURNAL
2008; 105 (6): 567-575
View details for Web of Science ID 000261585200004
-
Materials design for sustainability through life cycle modeling of engineered cementitious composites
MATERIALS AND STRUCTURES
2008; 41 (6): 1117-1131
View details for DOI 10.1617/s11527-007-9310-5
View details for Web of Science ID 000256434800010
-
Design of green engineered cementitious composites for pavement overlay applications
1st International Symposium on Life-Cycle Civil Engineering
CRC PRESS-TAYLOR & FRANCIS GROUP. 2008: 837–842
View details for Web of Science ID 000267796500130
- Large Scale Processing of Engineered Cementitious Composites ACI Materials Journal 2008; 4 (105): 358-366
-
An integrated life cycle assessment and life cycle analysis model for pavement overlay systems
1st International Symposium on Life-Cycle Civil Engineering
CRC PRESS-TAYLOR & FRANCIS GROUP. 2008: 907–912
View details for Web of Science ID 000267796500141
- Integrated Structure and Materials Design for Sustainable Concrete Transportation Infrastructure 2007
- Incorporating Life Cycle Analysis into Early Stage Office Furniture Product Development International Life Cycle Assessment and Management 2007. 2007
-
Guiding the design and application of new materials for enhancing sustainability performance: Framework and infrastructure application
Symposium on Life-Cycle Analysis Tools for Green Materials and Process Selection held at the 2005 MRS Fall Meeting
MATERIALS RESEARCH SOCIETY. 2006: 123–134
View details for Web of Science ID 000237226800013
- Sustainable Infrastructure Engineering: Integrating Material and Structural Design with Life Cycle Analysis Advances in Cement and Concrete X: Sustainability edited by Schrivener, K., Monteiro, P., Hanehara, S. ECI. 2006: 55–60
- Long Term Durability Performance of Engineered Cementitious Composites International Journal for Restoration of Buildings and Monuments 2006; 2 (12): 119-132
- Durability ang Long Term Performance of Engineered Cementitious Composites 2006
- General Design Assumptions for Engineered Cementitious Composites 2006
-
Life Cycle Modeling of Concrete Bridge Design: Comparison of Engineered Cementitious Composite Link Slabs and Conventional Steel Expansion Joints
JOURNAL OF INFRASTRUCTURE SYSTEMS
2005; 11 (1): 51-60
View details for DOI 10.1061/(ASCE)1076-0342(2005)11:1(51)
View details for Web of Science ID 000208358700006
- Water Permeability of Cracked Cementitious Composites 2005
- Life-Cycle Cost Model for Evaluating the Sustainability of Bridge Decks 2005
- Life Cycle Model for Evaluating the Sustainability of Concrete Infrastructure Systems 2005
- Design and Field Demonstration of ECC Link Slabs for Jointless Bridge Decks 2005
- Sustainable Infrastructure Material Design 2005
- Self -healing of ECC under cyclic wetting and drying 2005
- Self-healing in Cementitious Compounds Self-healing Materials Workshop edited by aan Zee, N. Delft, Netherlands. 2005: 1
- Life Cycle Modeling of Concrete Bridge Design: Comparison of ECC Link Slabs and Conventional Steel Expansion Joints Journal of Infrastructure Systems 2005: 51-60
-
Development of green engineered cementitious composites for sustainable infrastructure systems
International Workshop on Sustainable Development and Concrete Technology
CENTER TRANSPORTATION RESEARCH & EDUCATION. 2004: 181–191
View details for Web of Science ID 000223336500017
- Development of Green ECC for Sustainable Infrastructure Systems. edited by Wang, K. 2004
- Size Effect in ECC Structural Members in Flexure 2004
- Crack Resistant Concrete Material for Transportation Construction Transportation Research Board 83rd Annual Meeting Compendium of Papers, Paper No. 04-4680. 2004
- Preliminary Findings on Size Effect in ECC Structural Members in Flexural 2003