Stanford University
Showing 51-100 of 297 Results
-
Srabanti Chowdhury
Associate Professor of Electrical Engineering, Senior Fellow at the Precourt Institute for Energy and Associate Professor, by courtesy, of Materials Science and Engineering
Current Research and Scholarly InterestsWide bandap materials & devices for RF, Power and energy efficient electronics
-
William Chueh
Associate Professor of Materials Science and Engineering, of Energy Science and Engineering, of Photon Science, and Senior Fellow at the Precourt Institute for Energy
BioThe availability of low-cost but intermittent renewable electricity (e.g., derived from solar and wind) underscores the grand challenge to store and dispatch energy so that it is available when and where it is needed. Redox-active materials promise the efficient transformation between electrical, chemical, and thermal energy, and are at the heart of carbon-neutral energy cycles. Understanding design rules that govern materials chemistry and architecture holds the key towards rationally optimizing technologies such as batteries, fuel cells, electrolyzers, and novel thermodynamic cycles. Electrochemical and chemical reactions involved in these technologies span diverse length and time scales, ranging from Ångströms to meters and from picoseconds to years. As such, establishing a unified, predictive framework has been a major challenge. The central question unifying our research is: “can we understand and engineer redox reactions at the levels of electrons, ions, molecules, particles and devices using a bottom-up approach?” Our approach integrates novel synthesis, fabrication, characterization, modeling and analytics to understand molecular pathways and interfacial structure, and to bridge fundamentals to energy storage and conversion technologies by establishing new design rules.
-
Yi Cui
Fortinet Founders Professor, Professor of Materials Science and Engineering, of Energy Science and Engineering, of Photon Science, Senior Fellow at Woods and Professor, by courtesy, of Chemistry
BioCui studies fundamentals and applications of nanomaterials and develops tools for their understanding. Research Interests: nanotechnology, batteries, electrocatalysis, wearables, 2D materials, environmental technology (water, air, soil), cryogenic electron microscopy.
-
Reinhold Dauskardt
Ruth G. and William K. Bowes Professor in the School of Engineering
BioDauskardt and his group have worked extensively on integrating new materials into emerging technologies including thin-film structures for nanoscience and energy technologies, high-performance composite and laminates for aerospace, and on biomaterials and soft tissues in bioengineering. His group has pioneered methods for characterizing adhesion and cohesion of thin films used extensively in device technologies. His research on wound healing has concentrated on establishing a biomechanics framework to quantify the mechanical stresses and biologic responses in healing wounds and define how the mechanical environment affects scar formation. Experimental studies are complimented with a range of multiscale computational capabilities. His research includes interaction with researchers nationally and internationally in academia, industry, and clinical practice.
-
Felipe de Quesada
Ph.D. Student in Materials Science and Engineering, admitted Autumn 2019
BioPhD Candidate in materials science, researching ultrafast structural dynamics of topological and energy materials in the Lindenberg research group.
-
Joseph M. DeSimone
Sanjiv Sam Gambhir Professor of Translational Medicine, Professor of Chemical Engineering and, by courtesy, of Chemistry, of Materials Science and Engineering, and of Operations, Information and Technology at the Graduate School of Business
BioJoseph M. DeSimone is the Sanjiv Sam Gambhir Professor of Translational Medicine and Chemical Engineering at Stanford University. He holds appointments in the Departments of Radiology and Chemical Engineering with courtesy appointments in the Department of Chemistry and in Stanford’s Graduate School of Business.
The DeSimone laboratory's research efforts are focused on developing innovative, interdisciplinary solutions to complex problems centered around advanced polymer 3D fabrication methods. In Chemical Engineering and Materials Science, the lab is pursuing new capabilities in digital 3D printing, as well as the synthesis of new polymers for use in advanced additive technologies. In Translational Medicine, research is focused on exploiting 3D digital fabrication tools to engineer new vaccine platforms, enhanced drug delivery approaches, and improved medical devices for numerous conditions, with a current major focus in pediatrics. Complementing these research areas, the DeSimone group has a third focus in Entrepreneurship, Digital Transformation, and Manufacturing.
Before joining Stanford in 2020, DeSimone was a professor of chemistry at the University of North Carolina at Chapel Hill and of chemical engineering at North Carolina State University. He is also Co-founder, Board Chair, and former CEO (2014 - 2019) of the additive manufacturing company, Carbon. DeSimone is responsible for numerous breakthroughs in his career in areas including green chemistry, medical devices, nanomedicine, and 3D printing. He has published over 350 scientific articles and is a named inventor on over 200 issued patents. Additionally, he has mentored 80 students through Ph.D. completion in his career, half of whom are women and members of underrepresented groups in STEM.
In 2016 DeSimone was recognized by President Barack Obama with the National Medal of Technology and Innovation, the highest U.S. honor for achievement and leadership in advancing technological progress. He has received numerous other major awards in his career, including the U.S. Presidential Green Chemistry Challenge Award (1997); the American Chemical Society Award for Creative Invention (2005); the Lemelson-MIT Prize (2008); the NIH Director’s Pioneer Award (2009); the AAAS Mentor Award (2010); the Heinz Award for Technology, the Economy and Employment (2017); the Wilhelm Exner Medal (2019); the EY Entrepreneur of the Year Award (2019 U.S. Overall National Winner); and the Harvey Prize in Science and Technology (2020). He is one of only 25 individuals elected to all three branches of the U.S. National Academies (Sciences, Medicine, Engineering). DeSimone received his B.S. in Chemistry in 1986 from Ursinus College and his Ph.D. in Chemistry in 1990 from Virginia Tech. -
Thomas Devereaux
Professor of Photon Science and of Materials Science and Engineering
Current Research and Scholarly InterestsMy main research interests lie in the areas of theoretical condensed matter physics and computational physics. My research effort focuses on using the tools of computational physics to understand quantum materials. Fortunately, we are poised in an excellent position as the speed and cost of computers have allowed us to tackle heretofore unaddressed problems involving interacting systems. The goal of my research is to understand electron dynamics via a combination of analytical theory and numerical simulations to provide insight into materials of relevance to energy science. My group carries out numerical simulations on SIMES’ high-performance supercomputer and US and Canadian computational facilities. The specific focus of my group is the development of numerical methods and theories of photon-based spectroscopies of strongly correlated materials.
-
Gerwin Dijk
Postdoctoral Scholar, Materials Science and Engineering
BioBioelectronics, neurostimulation, biosensors, conducting polymers, microfabrication.
-
Jennifer Dionne
Professor of Materials Science and Engineering
BioJennifer Dionne is the Senior Associate Vice Provost of Research Platforms/Shared Facilities and an Associate Professor of Materials Science and Engineering and of Radiology (by courtesy) at Stanford. Jen received her Ph.D. in Applied Physics at the California Institute of Technology, advised by Harry Atwater, and B.S. degrees in Physics and Systems & Electrical Engineering from Washington University in St. Louis. Prior to joining Stanford, she served as a postdoctoral researcher in Chemistry at Berkeley, advised by Paul Alivisatos. Jen's research develops nanophotonic methods to observe and control chemical and biological processes as they unfold with nanometer scale resolution, emphasizing critical challenges in global health and sustainability. Her work has been recognized with the Alan T. Waterman Award (2019), an NIH Director's New Innovator Award (2019), a Moore Inventor Fellowship (2017), the Materials Research Society Young Investigator Award (2017), Adolph Lomb Medal (2016), Sloan Foundation Fellowship (2015), and the Presidential Early Career Award for Scientists and Engineers (2014), and was featured on Oprah’s list of “50 Things that will make you say ‘Wow!'"
-
Varun Dolia
Ph.D. Student in Materials Science and Engineering, admitted Autumn 2021
BioVarun Dolia is a Benchmark Fellow and a Ph.D. candidate in Prof. Jen Dionne's lab. He is excited about developing nanophotonic platforms for health and environmental monitoring.
-
Persis Drell
Provost, Emerita, James and Anna Marie Spilker Professor, Professor of Materials Science and Engineering and of Physics
BioPersis Drell is the James and Anna Marie Spilker Professor in the School of Engineering, a professor of materials science and engineering, and a professor of physics. From Feb 1, 2017 to Sept. 30, 2023, Drell was the provost of Stanford University.
Prior to her appointment as provost in February 2017, she was dean of the Stanford School of Engineering from 2014 to 2017 and director of U.S. Department of Energy SLAC National Acceleratory Laboratory from 2007 to 2012.
She earned her bachelor’s degree in mathematics and physics from Wellesley College and her PhD in atomic physics from UC Berkeley. Before joining the faculty at Stanford in 2002, she was a faculty member in the physics department at Cornell University for 14 years. -
Leora Dresselhaus-Marais
Assistant Professor of Materials Science and Engineering, of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsMy group develops new methods to update old processes in metals manufacturing
-
Lisa Ewan
Director of Finance and Operations, Materials Science and Engineering
Current Role at StanfordIn the newly created Senior Director of Administration role in the Dean's Office of the School of Humanities and Sciences, I am responsible for driving administrative excellence, building connections, and establishing engagement within H&S' decentralized environment. I will partner with the senior department and program administrators and Dean's Office functional area leaders to identify areas for improvement and drive and implement solutions. I will also lead the hiring process, onboarding, and mentoring of H&S' department and program administrative leaders.
-
Qingyuan Fan
Ph.D. Student in Materials Science and Engineering, admitted Autumn 2019
BioPh.D Student, Dept. of Materials Science and Engineering, Stanford 09.2019 - present
Undergraduate, Zhejiang University 2015-2019
Visiting Student Researcher, Aaron Lindenberg's group, Dept. of Materials Science and Engineering, Stanford 07.2018-09.2018 -
Ian Fisher
Professor of Applied Physics and, by courtesy, of Materials Science and Engineering
Current Research and Scholarly InterestsOur research focuses on the study of quantum materials with unconventional magnetic & electronic ground states & phase transitions. Emphasis on design and discovery of new materials. Recent focus on use of strain as a probe of, and tuning parameter for, a variety of electronic states. Interests include unconventional superconductivity, quantum phase transitions, nematicity, multipolar order, instabilities of low-dimensional materials and quantum magnetism.
-
Sadegh Ghorbani
Visiting Post Doc, Geballe Laboratory for Advanced Materials
Affiliate, Program-Heilshorn, S.BioA biotechnologist with a focus on protein-based hydrogels, aimed at exploring the intricate processes of neurogenesis, brain tumors, and the signaling pathways governing their cell-cell and cell-matrix adhesion. Through the utilization of customizable hydrogels that incorporate cell-adhesive sequences, our primary objective is to mimic the native microenvironment of the nervous system within 3D systems, allowing us to discern the intricate responses of cells on engineered and functional bio-interfaces. My work is driven by dual-core objectives. Firstly, I am committed to enhancing the treatment of peripheral nerve injuries by devising a therapeutic approach that is both efficient and effective. Secondly, I am involved in investigating the complex interactions between brain cancer cells and neuronal cells in precisely defined microenvironments.
#Biomaterials #Biointerface #Tissue_engineering #Neuroscience #Brain_tumors #Biotechnology #Cellular_biology
