School of Engineering
Showing 1-50 of 205 Results
-
Bruce Cahan
Lecturer, Management Science and Engineering
BioBruce Cahan is a Lecturer in Stanford University's Management Science and Engineering Department, a Distinguished Scholar at Stanford's Human-Sciences and Technologies Advanced Research Institute's mediaX Program, and an active member of CodeX Fellow at Stanford’s Center for Legal Informatics. Bruce co-founded the Sustainable Banking Initiative at Stanford. Bruce teaches Ethics of Finance (MS&E 148), Investing on the Buy Side of Wall Street (MS&E 449) and Sustainable Banking (CEE 244A) at Stanford. As an Ashoka Fellow through Urban Logic, Bruce is creating GoodBank™(IO), an independent teaching bank for high-transparency, impacts-aware commercial bankers.
-
Wei Cai
Associate Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioPredicting mechanical strength of materials through theory and simulations of defect microstructures across atomic, mesoscopic and continuum scales. Developing new atomistic simulation methods for long time-scale processes, such as crystal growth and self-assembly. Introducing magnetic field in quantum simulations of electronic structure and transport.
-
Scott Calvert
Sr. Associate Dean for Administration, School of Engineering
BioScott Calvert is responsible for school operations including finance, HR, IT, facilities, and research administration. He held a similar position at Stanford in the office of the vice provost for undergraduate education prior to joining the engineering team. Before coming to Stanford, Scott was a Navy fighter pilot for 21 years after receiving a commission through the NROTC program at Duke University where he earned a BSE in mechanical engineering. He made numerous deployments aboard aircraft carriers flying F-14s and F/A-18s, and between squadron assignments, he attended US Navy Test Pilot School on a cooperative program with the Naval Postgraduate School where he earned an MSAE in aeronautical engineering. In addition, he has an MBA from Columbia University.
-
David Camarillo
Assistant Professor of Bioengineering and, by courtesy, of Neurosurgery and of Mechanical Engineering
Current Research and Scholarly InterestsThe Camarillo Lab is currently instrumenting Stanford athletes with inertial sensors to investigate the mechanism of concussion. Additionally, the lab is researching cell mechanics for regenerative medicine. We are developing a quantitative, noninvasive and early measure of viability in order to allow clinicians to transfer the single most viable embryo. Other research area is in medical instrumentation as it pertains to robotic catheterization for curing cardiac arrhythmia.
-
Leopold Cambier
Ph.D. Student in Computational and Mathematical Engineering, admitted Autumn 2015
Current Research and Scholarly InterestsFast Sparse Linear Solvers
-
Emmanuel Candes
Barnum-Simons Chair in Math and Statistics, and Professor of Statistics and, by courtesy, of Electrical Engineering
BioEmmanuel Candès is the Barnum-Simons Chair in Mathematics and Statistics, a professor of electrical engineering (by courtesy) and a member of the Institute of Computational and Mathematical Engineering at Stanford University. Earlier, Candès was the Ronald and Maxine Linde Professor of Applied and Computational Mathematics at the California Institute of Technology. His research interests are in computational harmonic analysis, statistics, information theory, signal processing and mathematical optimization with applications to the imaging sciences, scientific computing and inverse problems. He received his Ph.D. in statistics from Stanford University in 1998.
Candès has received several awards including the Alan T. Waterman Award from NSF, which is the highest honor bestowed by the National Science Foundation, and which recognizes the achievements of early-career scientists. He has given over 60 plenary lectures at major international conferences, not only in mathematics and statistics but in many other areas as well including biomedical imaging and solid-state physics. He was elected to the National Academy of Sciences and to the American Academy of Arts and Sciences in 2014. -
Brian Cantwell
Edward C. Wells Professor in the School of Engineering and Professor of Mechanical Engineering
BioProfessor Cantwell's research interests are in the area of turbulent flow. Recent work has centered in three areas: the direct numerical simulation of turbulent shear flows, theoretical studies of the fine-scale structure of turbulence, and experimental measurements of turbulent structure in flames. Experimental studies include the development of particle-tracking methods for measuring velocity fields in unsteady flames and variable density jets. Research in turbulence simulation includes the development of spectral methods for simulating vortex rings, the development of topological methods for interpreting complex fields of data, and simulations of high Reynolds number compressible and incompressible wakes. Theoretical studies include predictions of the asymptotic behavior of drifting vortex pairs and vortex rings and use of group theoretical methods to study the nonlinear dynamics of turbulent fine-scale motions. Current projects include studies of fast-burning fuels for hybrid propulsion and decomposition of nitrous oxide for space propulsion.
-
Mark A. Cappelli
Professor of Mechanical Engineering
BioProfessor Cappelli is the author of over 100 papers in these areas. He is currently a member of the Editorial Board of Diamond Films and Technology. He is also secretary of the Electric Propulsion Technical Committee of the American Institute for Aeronautics and Astronautics.
-
Matteo Cargnello
Assistant Professor of Chemical Engineering
BioMatteo Cargnello is Assistant Professor of Chemical Engineering and Terman Faculty Fellow. His group research interests are in the preparation and use of uniform and tailored materials for heterogeneous catalysis and photocatalysis and the technological exploitation of nanoparticles and nanocrystals. Reactions of interest are related to sustainable energy generation and use, control of emissions of greenhouse gases, and better utilization of abundant building blocks (methane, biomass). Dr. Cargnello received his Ph.D. in Nanotechnology in 2012 at the University of Trieste (Italy) and he was then a post-doctoral scholar in the Chemistry Department at the University of Pennsylvania (Philadelphia) before joining the Faculty at Stanford. He is the recipient of the ENI Award Debut in Research 2013, the European Federation of Catalysis Societies Award as best European Ph.D. thesis in catalysis in 2013, and the Sloan Fellowship in 2018.
-
Gunnar Carlsson
Ann and Bill Swindells Professor, Emeritus
BioDr. Carlsson has been a professor of mathematics at Stanford University since 1991. In the last ten years, he has been involved in adapting topological techniques to data analysis, under NSF funding and as the lead PI on the DARPA “Topological Data Analysis” project from 2005 to 2010. He is the lead organizer of the ATMCS conferences, and serves as an editor of several Mathematics journals
-
J. Edward Carryer
Adjunct Professor, Mechanical Engineering
BioEd Carryer graduated from the Illinois Institute of Technology in 1975 with a BSE as a member of the first graduating class of the Education and Experience in Engineering Program. This innovative project-based learning program taught him that he could learn almost anything that he needed to know and set him on a path of lifelong learning. That didn’t, however, keep him from going back to school.
Upon completion of his Master’s Degree in Bio-Medical Engineering at the University of Wisconsin Madison in 1978, he was seduced by his love of cars, and instead of going into medical device design, he went to work for Ford on the 1979 Turbocharged Mustang. In later programs at Ford, he got to apply the background that he had gained in electronics and microcontrollers during his graduate work to the 1983 Turbocharged Mustang and Thunderbird and the 1984 SVO Mustang. After leaving Ford, Ed worked on the design and implementation of engine control software for GM and on a stillborn development program to put a turbocharged engine into the Renault Alliance at AMC before deciding to return once again to school. At Stanford University, he did research in the engine lab and earned his PhD in 1992.
While working on his PhD, Ed got involved in teaching the graduate course sequence in mechatronics that is known at Stanford as Smart Product Design. He took over teaching the courses first part time in 1989, then full time after completing his PhD. In teaching mechatronics, Ed seems to have found his calling. The integration of mechanical, electronic, and software design with teaching others how to use all of this to make new products hits all his buttons. He is currently a Consulting Professor and the Director of the Smart Product Design Lab (SPDL). He teaches graduate courses in mechatronics in the Mechanical Engineering department and an undergraduate course in mechatronics in the Electrical Engineering department.
Since 1984, Ed has maintained a consultancy focused on helping firms apply electronics and software in the creation of integrated electromechanical solutions (in 1984, almost no one was using the term mechatronics).The projects that he has worked on include an engine controller for an outboard motor manufacturer, an automated blood gas analyzer, a turbocharger boost control system for a new type of turbocharger, and a heated glove for arctic explorers. His most recent project involved using ZigBee radios and local structural model evaluation to create a wireless network of intelligent sensors to monitor and evaluate the structural health of buildings and transportation infrastructure. -
Carissa Carter
Adjunct Professor, Hasso Plattner Institute of Design
BioCarissa Carter is the Director of Teaching + Learning at the Stanford d.school. In this role she guides the development of the d.school’s pedagogy, leads its instructors, and shapes its class offering. She teaches courses on the intersection of data and design, design for climate change, and maps and the visual sorting of information.
-
Dennis R Carter
Professor of Mechanical Engineering, Emeritus
Current Research and Scholarly InterestsProfessor Carter studies the influence of mechanical loading upon the growth, development, regeneration, and aging of skeletal tissues. Basic information from such studies is used to understand skeletal diseases and treatments. He has served as President of the Orthopaedic Research Society and is a Fellow of the American Institute for Medical and Biological Engineering.
