School of Engineering


Showing 1-58 of 58 Results

  • Bruce Cahan

    Bruce Cahan

    Lecturer, Management Science and Engineering

    BioBruce Cahan is a Lecturer in Stanford University's Management Science and Engineering Department, a Distinguished Scholar at Stanford's Human-Sciences and Technologies Advanced Research Institute's mediaX Program, and an active member of CodeX Fellow at Stanford’s Center for Legal Informatics. Bruce co-founded the Sustainable Banking Initiative at Stanford. Bruce teaches Ethics of Finance (MS&E 148), Investing on the Buy Side of Wall Street (MS&E 449) and Sustainable Banking (CEE 244A) at Stanford. As an Ashoka Fellow through Urban Logic, Bruce is creating GoodBank™(IO), an independent teaching bank for high-transparency, impacts-aware commercial bankers.

  • Wei Cai

    Wei Cai

    Associate Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering

    BioPredicting mechanical strength of materials through theory and simulations of defect microstructures across atomic, mesoscopic and continuum scales. Developing new atomistic simulation methods for long time-scale processes, such as crystal growth and self-assembly. Introducing magnetic field in quantum simulations of electronic structure and transport.

  • David Camarillo

    David Camarillo

    Assistant Professor of Bioengineering and, by courtesy, of Neurosurgery and of Mechanical Engineering

    BioDavid B. Camarillo is Assistant Professor of Bioengineering, (by courtesy) Mechanical Engineering and Neurosurgery at Stanford University. Dr. Camarillo holds a B.S.E in Mechanical and Aerospace Engineering from Princeton University, a Ph.D. in Mechanical Engineering from Stanford University and completed postdoctoral fellowships in Biophysics at the UCSF and Biodesign Innovation at Stanford. Dr. Camarillo worked in the surgical robotics industry at Intuitive Surgical and Hansen Medical, before launching his laboratory at Stanford in 2012. His current research focuses on precision human measurement for multiple clinical and physiological areas including the brain, heart, lungs, and reproductive system. Dr. Camarillo has been awarded the Hellman Fellowship, the Office of Naval Research Young Investigator Program award, among other honors including multiple best paper awards in brain injury and robotic surgery. His research has been funded by the NIH, NSF, DoD, as well as corporations and private philanthropy. His lab’s research has been featured on NPR, the New York Times, The Washington Post, Science News, ESPN, and TED.com as well as other media outlets aimed at education of the public.

  • Emmanuel Candes

    Emmanuel Candes

    Barnum-Simons Chair in Math and Statistics, and Professor of Statistics and, by courtesy, of Electrical Engineering

    BioEmmanuel Candès is the Barnum-Simons Chair in Mathematics and Statistics, a professor of electrical engineering (by courtesy) and a member of the Institute of Computational and Mathematical Engineering at Stanford University. Earlier, Candès was the Ronald and Maxine Linde Professor of Applied and Computational Mathematics at the California Institute of Technology. His research interests are in computational harmonic analysis, statistics, information theory, signal processing and mathematical optimization with applications to the imaging sciences, scientific computing and inverse problems. He received his Ph.D. in statistics from Stanford University in 1998.

    Candès has received several awards including the Alan T. Waterman Award from NSF, which is the highest honor bestowed by the National Science Foundation, and which recognizes the achievements of early-career scientists. He has given over 60 plenary lectures at major international conferences, not only in mathematics and statistics but in many other areas as well including biomedical imaging and solid-state physics. He was elected to the National Academy of Sciences and to the American Academy of Arts and Sciences in 2014.

  • Brian Cantwell

    Brian Cantwell

    Edward C. Wells Professor in the School of Engineering and Professor of Mechanical Engineering

    BioProfessor Cantwell's research interests are in the area of turbulent flow. Recent work has centered in three areas: the direct numerical simulation of turbulent shear flows, theoretical studies of the fine-scale structure of turbulence, and experimental measurements of turbulent structure in flames. Experimental studies include the development of particle-tracking methods for measuring velocity fields in unsteady flames and variable density jets. Research in turbulence simulation includes the development of spectral methods for simulating vortex rings, the development of topological methods for interpreting complex fields of data, and simulations of high Reynolds number compressible and incompressible wakes. Theoretical studies include predictions of the asymptotic behavior of drifting vortex pairs and vortex rings and use of group theoretical methods to study the nonlinear dynamics of turbulent fine-scale motions. Current projects include studies of fast-burning fuels for hybrid propulsion and decomposition of nitrous oxide for space propulsion.

  • Mark A. Cappelli

    Mark A. Cappelli

    Professor of Mechanical Engineering

    BioProfessor Cappelli is the author of over 100 papers in these areas. He is currently a member of the Editorial Board of Diamond Films and Technology. He is also secretary of the Electric Propulsion Technical Committee of the American Institute for Aeronautics and Astronautics.

  • Matteo Cargnello

    Matteo Cargnello

    Assistant Professor of Chemical Engineering and, by courtesy, of Materials Science and Engineering

    BioMatteo Cargnello is Assistant Professor of Chemical Engineering and Terman Faculty Fellow. His group research interests are in the preparation and use of uniform and tailored materials for heterogeneous catalysis and photocatalysis and the technological exploitation of nanoparticles and nanocrystals. Reactions of interest are related to sustainable energy generation and use, control of emissions of greenhouse gases, and better utilization of abundant building blocks (methane, biomass). Dr. Cargnello received his Ph.D. in Nanotechnology in 2012 at the University of Trieste (Italy) and he was then a post-doctoral scholar in the Chemistry Department at the University of Pennsylvania (Philadelphia) before joining the Faculty at Stanford. He is the recipient of the ENI Award Debut in Research 2013, the European Federation of Catalysis Societies Award as best European Ph.D. thesis in catalysis in 2013, and the Sloan Fellowship in 2018.

  • Gunnar Carlsson

    Gunnar Carlsson

    Ann and Bill Swindells Professor, Emeritus

    BioDr. Carlsson has been a professor of mathematics at Stanford University since 1991. In the last ten years, he has been involved in adapting topological techniques to data analysis, under NSF funding and as the lead PI on the DARPA “Topological Data Analysis” project from 2005 to 2010. He is the lead organizer of the ATMCS conferences, and serves as an editor of several Mathematics journals

  • Maureen Carroll

    Maureen Carroll

    Lecturer, Hasso Plattner Institute of Design

    BioMaureen Carroll, Ph.D., is the Founder of Lime Design and a lecturer at Stanford’s Hasso Plattner Institute of Design (d.school) where she co-teaches Hacking Your Innovation Mindset and worked with the d.school Fellowship Program as a Design Ally. She was the Director of REDlab, which conducts research on the intersection of design thinking and learning at Stanford University from 2008-2016 and received a National Science Foundation grant. She was also a lecturer in Stanford University’s Graduate School of Education, where she co-taught Educating Young STEM Thinkers – a course that integrated design thinking and STEM and gave Stanford students the opportunity to mentor East Palo Alto middle schoolers. Carroll is an ethnographer who has published research in Design Studies, The International Journal of Art & Design Education, The Journal of Research in STEM Education, The Journal of Pre-College Engineering Education Research, and and has a Ph.D. from the University of California at Berkeley in Education: Language, Literacy and Culture.

  • J. Edward Carryer

    J. Edward Carryer

    Adjunct Professor, Mechanical Engineering

    BioEd Carryer graduated from the Illinois Institute of Technology in 1975 with a BSE as a member of the first graduating class of the Education and Experience in Engineering Program. This innovative project-based learning program taught him that he could learn almost anything that he needed to know and set him on a path of lifelong learning. That didn’t, however, keep him from going back to school.

    Upon completion of his Master’s Degree in Bio-Medical Engineering at the University of Wisconsin Madison in 1978, he was seduced by his love of cars, and instead of going into medical device design, he went to work for Ford on the 1979 Turbocharged Mustang. In later programs at Ford, he got to apply the background that he had gained in electronics and microcontrollers during his graduate work to the 1983 Turbocharged Mustang and Thunderbird and the 1984 SVO Mustang. After leaving Ford, Ed worked on the design and implementation of engine control software for GM and on a stillborn development program to put a turbocharged engine into the Renault Alliance at AMC before deciding to return once again to school. At Stanford University, he did research in the engine lab and earned his PhD in 1992.

    While working on his PhD, Ed got involved in teaching the graduate course sequence in mechatronics that is known at Stanford as Smart Product Design. He took over teaching the courses first part time in 1989, then full time after completing his PhD. In teaching mechatronics, Ed seems to have found his calling. The integration of mechanical, electronic, and software design with teaching others how to use all of this to make new products hits all his buttons. He is currently a Consulting Professor and the Director of the Smart Product Design Lab (SPDL). He teaches graduate courses in mechatronics in the Mechanical Engineering department and an undergraduate course in mechatronics in the Electrical Engineering department.

    Since 1984, Ed has maintained a consultancy focused on helping firms apply electronics and software in the creation of integrated electromechanical solutions (in 1984, almost no one was using the term mechatronics).The projects that he has worked on include an engine controller for an outboard motor manufacturer, an automated blood gas analyzer, a turbocharger boost control system for a new type of turbocharger, and a heated glove for arctic explorers. His most recent project involved using ZigBee radios and local structural model evaluation to create a wireless network of intelligent sensors to monitor and evaluate the structural health of buildings and transportation infrastructure.

  • Carissa Carter

    Carissa Carter

    Adjunct Professor, Hasso Plattner Institute of Design

    BioCarissa Carter is the Director of Teaching + Learning at the Stanford d.school. In this role she guides the development of the d.school’s pedagogy, leads its instructors, and shapes its class offering. She teaches courses on the intersection of data and design, design for climate change, and maps and the visual sorting of information.

  • Dennis R Carter

    Dennis R Carter

    Professor of Mechanical Engineering, Emeritus

    Current Research and Scholarly InterestsProfessor Carter studies the influence of mechanical loading upon the growth, development, regeneration, and aging of skeletal tissues. Basic information from such studies is used to understand skeletal diseases and treatments. He has served as President of the Orthopaedic Research Society and is a Fellow of the American Institute for Medical and Biological Engineering.

  • Lynette Cegelski

    Lynette Cegelski

    Associate Professor of Chemistry and, by courtesy, of Chemical Engineering

    Current Research and Scholarly InterestsOur research program integrates chemistry, biology, and physics to investigate the assembly and function of macromolecular and whole-cell systems. The genomics and proteomics revolutions have been enormously successful in generating crucial "parts lists" for biological systems. Yet, for many fascinating systems, formidable challenges exist in building complete descriptions of how the parts function and assemble into macromolecular complexes and whole-cell factories. We are inspired by the need for new and unconventional approaches to solve these outstanding problems and to drive the discovery of new therapeutics for human disease.

    Our approach is different from the more conventional protein-structure determinations of structural biology. We employ biophysical and biochemical tools, and are designing new strategies using solid-state NMR spectroscopy to examine assemblies such as amyloid fibers, bacterial cell walls, whole cells, and biofilms. We would like to understand at a molecular and atomic level how bacteria self-assemble extracellular structures, including functional amyloid fibers termed curli, and how bacteria use such building blocks to construct organized biofilm architectures. We also employ a chemical genetics approach to recruit small molecules as tools to interrupt and interrogate the temporal and spatial events during assembly processes and to develop new strategies to prevent and treat infectious diseases. Overall, our approach is multi-pronged and provides training opportunities for students interested in research at the chemistry-biology interface.

  • Fu-Kuo Chang

    Fu-Kuo Chang

    Professor of Aeronautics and Astronautics

    BioProfessor Chang's primary research interest is in the areas of multi-functional materials and intelligent structures with particular emphases on structural health monitoring, intelligent self-sensing diagnostics, and integrated health management for space and aircraft structures as well safety-critical assets and medical devices. His specialties include sensors and sensor network development, built-in self-diagnostics,  integrated diagnostics and prognostics, damage tolerance and failure analysis for composite materials, and advanced multi-physics computational methods for multi-functional structures. Most of his work involves system integration and multi-disciplinary engineering in structural mechanics, electrical engineering, signal processing, and multi-scale fabrication of materials. His recent research topics include: Integrated health management for aircraft structures, bio-inspired intelligent sensory materials for fly-by-feel autonomous vehicles, active sensing diagnostics for composite structures, self-diagnostics for high-temperature materials, etc.

  • Moses Charikar

    Moses Charikar

    Donald E. Knuth Professor and Professor, by courtesy, of Mathematics

    Current Research and Scholarly InterestsApproximation algorithms for discrete optimization problems with provable guarantees; convex optimization approaches for non-convex combinatorial optimization problems; efficient algorithmic techniques for processing, searching and indexing massive high-dimensional data sets; efficient algorithms for computational problems in high-dimensional statistics and optimization problems in machine learning; low-distortion embeddings of finite metric spaces.

  • Ovijit Chaudhuri

    Ovijit Chaudhuri

    Assistant Professor of Mechanical Engineering

    BioOur group's research is focused at the intersection of mechanics and biology. We are interested in elucidating the underlying molecular mechanisms that give rise to the complex mechanical properties of cells, extracellular matrices, and tissues . Conversely, we are investigating how complex mechanical cues influence important biological processes such as cell division, differentiation, or cancer progression. Our approaches involve using force measurement instrumentation, such as atomic force microscopy, to exert and measure forces on materials and cells at the nanoscale, and the development of material systems for 3D cell culture that allow precise and independent manipulation of mechanical properties.

  • Helen L. Chen

    Helen L. Chen

    Social Science Research Scholar, Mechanical Engineering

    BioHelen L. Chen is a research scientist in the Designing Education Lab in the Department of Mechanical Engineering at Stanford University. She holds an undergraduate degree in communication from UCLA and a PhD in communication with a minor in psychology from Stanford. Helen is a board member for the Association for Authentic, Experiential and Evidence-Based Learning (AAEEBL) and is a co-author of Documenting Learning with ePortfolios: A Guide for College Instructors and co-executive editor of the International Journal of ePortfolio. She works closely with the Association of American Colleges and Universities and consults with institutions on general education redesign, authentic assessment approaches, design thinking, and personal branding and ePortfolios. Helen's current research and scholarship focus on engineering and entrepreneurship education; the pedagogy of portfolios and reflective practice in higher education; and redesigning how learning is recorded and recognized in traditional transcripts and academic credentials.

  • E.J. Chichilnisky

    E.J. Chichilnisky

    John R. Adler Professor, Professor of Neurosurgery and of Ophthalmology and, by courtesy, of Electrical Engineering

    Current Research and Scholarly InterestsFunctional circuitry of the retina and design of retinal prostheses

  • Jun-Chau Chien

    Jun-Chau Chien

    Engr Res Assoc, Electrical Engineering

    BioJun-Chau Chien received the B.S. and M.S. degrees in Electrical Engineering from National Taiwan University in 2004 and 2006, respectively, and the Ph.D. degree in Electrical Engineering and Computer Sciences from University of California, Berkeley, in 2015. He is currently a post-doctoral research associate at Stanford University. He has held industrial positions at InvenSense, Xilinx, and HMicro working on mixed-signal integrated circuits for inertial sensors and wireline/wireless transceivers. He is broadly interested in innovative biotechnology for point-of-care diagnostics and medical imaging with emphasis on silicon-based approaches.

  • Wah Chiu

    Wah Chiu

    Professor of Photon Science, Bioengineering and of Microbiology and Immunology

    Current Research and Scholarly InterestsMy research include methodology improvements in single particle cryo-EM for atomic resolution structure determination of molecules and molecular machines, as well as in cryo-ET of cells and organelles towards subnanometer resolutions. We have collaborations with many researchers around the country and outside USA on understanding biological processes such as protein folding, virus assembly and disassembly, pathogen-host interactions, signal transduction, transport across cytosol and membrane.

  • Srabanti Chowdhury

    Srabanti Chowdhury

    Associate Professor of Electrical Engineering

    Current Research and Scholarly InterestsWide bandap materials & devices for RF, Power and energy efficient electronics

  • Richard Christensen

    Richard Christensen

    Professor (Research) of Aeronautics and Astronautics and of Mechanical Engineering, Emeritus

    BioProfessor Christensen's research is concerned with the mechanics of materials. The behavior of polymers and polymeric fiber composites are areas of specialization. Of particular interest is the field of micro-mechanics that focuses on materials' functionality at intermediate-length scales between atomic and the usual macro scale. Applicable techniques involve the methods of homogenization for all types of composite materials. The intended outcomes of his research are useful means of characterizing the yielding, damage accumulation, and failure behavior of modern materials. A related website has been developed to provide critical evaluations for the mathematical failure criteria used with the various classes of engineering materials. Most of these materials types are employed in aerospace structures and products.

  • William Chueh

    William Chueh

    Associate Professor of Materials Science and Engineering and Senior Fellow at the Precourt Institute for Energy

    BioThe availability of low-cost but intermittent renewable electricity (e.g., derived from solar and wind) underscores the grand challenge to store and dispatch energy so that it is available when and where it is needed. Redox-active materials promise the efficient transformation between electrical, chemical, and thermal energy, and are at the heart of carbon-neutral energy cycles. Understanding design rules that govern materials chemistry and architecture holds the key towards rationally optimizing technologies such as batteries, fuel cells, electrolyzers, and novel thermodynamic cycles. Electrochemical and chemical reactions involved in these technologies span diverse length and time scales, ranging from Ångströms to meters and from picoseconds to years. As such, establishing a unified, predictive framework has been a major challenge. The central question unifying our research is: “can we understand and engineer redox reactions at the levels of electrons, ions, molecules, particles and devices using a bottom-up approach?” Our approach integrates novel synthesis, fabrication, characterization, modeling and analytics to understand molecular pathways and interfacial structure, and to bridge fundamentals to energy storage and conversion technologies by establishing new design rules.

  • John Cioffi

    John Cioffi

    Hitachi America Professor in the School of Engineering, Emeritus

    BioJohn M. Cioffi taught Stanford's graduate electrical engineering course sequence in digital communications for over 20 years from 1986 to 2008, when he retired to emeritus. Cioffi's research interests were in the theory of transmitting the highest possible data rates on a number of different communications channels, many of which efforts were spun out of Stanford through he and/or his many former PhD students to companies, most notably including the basic designed used worldwide on more than 500 million DSL connections. Cioffi also over saw the prototype developments for the worlds first cable modem and digital-audio broadcast system. Cioffi pioneering the use of remote management algorithms to improve (over the internet or cloud) both wireline (DSL) and wireless (Wi-Fi) physical-layer transmission performance, an area often known as Dynamic Spectrum Management or Dynamic Line Management. Cioffi was co-inventer on basic patents for vectored DSL transmission and optimized MIMO wireless transmission. In his early career, Cioffi developed the worlds first full-duplex voiceband data modem while at Bell Laboratories, and the worlds first adaptively equalized disk read channel while at IBM. His courses and research projects over the years centered on these areas.

  • Bruce Clemens

    Bruce Clemens

    Walter B. Reinhold Professor in the School of Engineering and Professor of Photon Science

    BioClemens studies growth and structure of thin film, interface and nanostructured materials for catalytic, electronic and photovoltaic applications. He and his group investigate phase transitions and kinetics in nanostructured materials, and perform nanoparticle engineering for hydrogen storage and catalysis. Recently he and his collaborators have developed nano-portals for efficient injection of hydrogen into storage media, dual-phase nanoparticles for catalysis, amorphous metal electrodes for semiconductor devices, and a lift-off process for forming free-standing, single-crystal films of compound semiconductors.

  • Sigrid Close

    Sigrid Close

    Associate Professor of Aeronautics and Astronautics and, by courtesy, of Electrical Engineering

    BioProf. Close's research involves space weather detection and modeling for improved spacecraft designs, and advanced signal processing and electromagnetic wave interactions with plasma for ground-to-satellite communication systems. These topics fall under the Space Situational Awareness (SSA) umbrella that include environmental remote sensing using satellite systems and ground-based radar. Her current efforts are the MEDUSSA (Meteoroid, Energetics, and Debris Understanding for Space Situational Awareness) program, which uses dust accelerators to understand the effects of hypervelocity particle impacts on spacecraft along with Particle-In-Cell simulations, and using ground-based radars to characterize the space debris and meteoroid population remotely. She also has active programs in hypersonic plasmas associated with re-entry vehicles.

  • Jennifer R. Cochran

    Jennifer R. Cochran

    Shriram Chair of Bioengineering, Professor of Bioengineering and, by courtesy, of Chemical Engineering

    Current Research and Scholarly InterestsMolecular Engineering, Protein Biochemistry, Biotechnology, Cell and Tissue Engineering, Molecular Imaging, Chemical Biology

  • Steven Hartley Collins

    Steven Hartley Collins

    Associate Professor of Mechanical Engineering

    BioSteve Collins received his B.S. in Mechanical Engineering in 2002 from Cornell University, where he performed research on passive dynamic walking robots with Andy Ruina. He received his Ph.D. in Mechanical Engineering in 2008 from the University of Michigan, where he performed research on the dynamics and control of human walking with Art Kuo. He performed postdoctoral research on humanoid robots with Martijn Wisse at T. U. Delft in the Netherlands. He was a professor of Mechanical Engineering and Robotics at Carnegie Mellon University for seven years. In 2017, he joined the faculty of Mechanical Engineering at Stanford University, where he teaches courses on design and robotics and directs the Stanford Biomechatronics Lab.

    Prof. Collins' primary focus is to speed and systematize the design and prescription of prostheses and exoskeletons using versatile device emulator hardware and human-in-the-loop optimization algorithms (Zhang et al. 2017, Science). Another focus is efficient autonomous devices, such as highly energy-efficient walking robots (Collins et al. 2005, Science) and exoskeletons that use no energy yet reduce the metabolic energy cost of human walking (Collins et al. 2015, Nature). He is a member of the Scientific Board of Dynamic Walking and an Associate Editor of the International Journal of Robotics Research. He has received the Young Scientist Award from the American Society of Biomechanics, the Best Medical Devices Paper from the International Conference on Robotics and Automation, and the student-voted Professor of the Year in his department.

  • Toby Corey

    Toby Corey

    Lecturer, Management Science and Engineering

    BioCareer Highlights: successfully managed three $1b+ businesses (one as co-founder/President), two successful IPO’s, raised over $300m in private and public financing, former President of leader in clean energy services with successful IPO and successful Tesla merger, co-founder and former President/COO of worldwide leader in web development services with $3b+ market cap and successful IPO, managed 7,000+ employee organization, operating globally, awarded two "messaging" patents, executed 40+ M&A transactions while career path disrupted information technology, digital economy, Renewable Energy and Mobile sectors. Currently sitting on the boards of Buoy, Advanced MicroGrid Solutions, WildLifeDirect with Chairman Dr. Richard Leakey (former board member) and advisory boards at Inboard Technologies, YaDoggi and CruzFoam.

  • Richard Cottle

    Richard Cottle

    Professor of Management Science and Engineering, Emeritus

    BioRichard W. (Dick) Cottle was born in Chicago in 1934. He received his elementary and high school education in the neighboring village of Oak Park. Dick enrolled at Harvard College to take up political science and premedical studies in order to become a physician (or possibly a foreign service officer if that didn't work out). As it happened, both of these alternatives were abandoned because he was strongly attracted to mathematics and ultimately received his bachelor's degree in that field. He stayed on at Harvard and received the master's degree in mathematics in 1958. This was the Sputnik era, and Dick was moved by a passion to teach secondary-level mathematics. In the first of a series of fateful decisions, he joined the Mathematics Department at the Middlesex School in Concord, Massachusetts where for two years he taught grades 7-12. Midway through this period he married his wife Suzanne (Sue). At this time he began to think of returning to graduate school for a doctorate in mathematics. He decided to study geometry at the University of California at Berkeley and was admitted there. Just before leaving Middlesex, Dick received a telephone call from the Radiation Laboratory at Berkeley offering him the part- time job as a computer programmer for which he had applied. Through this job, he became aware of linear and quadratic programming and the contributions of George Dantzig and Philip Wolfe. Before long, Dick left the Rad Lab to join Dantzig's team at the Operations Research Center at UC Berkeley. Under the tutelage of George Dantzig (and the late Edmund Eisenberg), Dick developed a symmetric duality theory and what was then called the "composite problem". These topics along with a reëxamination of the Fritz John conditions, formed the core of his doctoral dissertation. The composite problem involved a fusion of the primal and dual first-order optimality conditions. It was realized that the resulting inequality system could be studied without reference to the primal-dual structure out of which it was born. The name "complementarity problem" was suggested by Dick and introduced in a joint paper with Habetler and Lemke. After Berkeley, Dick's work took two closely related directions. One was the study of quadratic programming; the other was what we now call "linear complementarity". The interesting role played by classes of matrices in both these areas has always held a special fascination for Dick. In quadratic programming, for instance, with Jacques Ferland he obtained characterizations of quasi- and pseudo-convexity of quadratic functions. Dick (and others) were quick to recognize the importance of matrix classes in linear complementarity theory. It was he who proposed the name "copositive-plus" for a matrix class that arose in Lemke's seminal paper of 1965. The name first appeared in the classic paper of Cottle and Dantzig called "Complementary Pivot Theory of Mathematical Programming". The subjects of quadratic programming and linear complementarity (and the associated matrix theory) remain central to his research interests.

  • Markus Covert

    Markus Covert

    Associate Professor of Bioengineering and, by courtesy, of Chemical and Systems Biology

    Current Research and Scholarly InterestsOur focus is on building computational models of complex biological processes, and using them to guide an experimental program. Such an approach leads to a relatively rapid identification and validation of previously unknown components and interactions. Biological systems of interest include metabolic, regulatory and signaling networks as well as cell-cell interactions. Current research involves the dynamic behavior of NF-kappaB, an important family of transcription factors.

  • Craig Criddle

    Craig Criddle

    Professor of Civil and Environmental Engineering and Senior Fellow, by courtesy, at the Woods Institute for the Environment

    BioCriddle's research focuses on biotechnology and microbial ecology for clean water, clean energy, and healthy ecosystems.

  • Yi Cui

    Yi Cui

    Professor of Materials Science and Engineering, of Photon Science, Senior Fellow at the Precourt Institute for Energy and Prof, by courtesy, of Chemistry

    BioCui studies nanoscale phenomena and their applications broadly defined. Research Interests: Nanocrystal and nanowire synthesis and self-assembly, electron transfer and transport in nanomaterials and at the nanointerface, nanoscale electronic and photonic devices, batteries, solar cells, microbial fuel cells, water filters and chemical and biological sensors.

  • Mark Cutkosky

    Mark Cutkosky

    Fletcher Jones Chair in the School of Engineering

    BioCutkosky applies analyses, simulations, and experiments to the design and control of robotic hands, tactile sensors, and devices for human/computer interaction. In manufacturing, his work focuses on design tools for rapid prototyping.