School of Engineering
Showing 101-200 of 558 Results
-
Eric Darve
Director, Institute for Computational and Mathematical Engineering (ICME) and Professor of Mechanical Engineering
Current Research and Scholarly InterestsThe research interests of Professor Darve span across several domains, including machine learning for science and engineering, large-language models, transformer models, surrogate and reduced order modeling, stochastic inversing, anomaly detection, numerical linear algebra, high-performance, parallel, and GPU computing.
-
David Davidson
Senior Research Engineer, Mechanical Engineering
BioEducation
University of Toronto Physics B.S (1978)
University of Toronto Aerospace Sciences M.Sc. (1980)
York University Physics Ph.D. (1986)
Appointment:
1986-present Senior Research Engineer, Mechanical Engineering Department
Research Activities:
Dr. Davidson’s research interests span the fields of gas dynamics and combustion kinetics. During his tenure at Stanford University he investigated the chemical kinetics of combustion using a wide array of optical and laser-based diagnostic methods and advanced the use of these diagnostics in shock tubes. He co-authored over 350 research publications with his students and Professor Ronald Hanson. He continues to advise and mentor the graduate students who use shock tubes in the High Temperature Gasdynamics Laboratories. An overview of the shock tube studies performed at Stanford under Prof. Hanson’s and Dr. Davidson’s supervision can be found in the report entitled “Fundamental Kinetics Database Utilizing Shock Tube Measurements” available at http://purl.stanford.edu/kb621cw6967.
He claims he is now retired, but apparently, he is still working. -
Scott L. Delp, Ph.D.
Director, Wu Tsai Human Performance Alliance at Stanford, James H. Clark Professor in the School of Engineering, Professor of Bioengineering and of Mechanical Engineering
Current Research and Scholarly InterestsExperimental and computational approaches to study human movement. Development of biomechanical models to analyze muscle function, study movement abnormalities, design medical products, and guide surgery. Imaging and health technology development. Discovering the principles of peak performance to advance human health. Human performance research. Wearable technologies, video motion capture, and machine learning to enable large-scale analysis.
-
Leora Dresselhaus-Marais
Assistant Professor of Materials Science and Engineering, of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsMy group develops new methods to update old processes in metals manufacturing
-
John Eaton
Charles Lee Powell Foundation Professor in the School of Engineering, Emeritus
BioEaton uses experiments and computational simulations to study the flow and heat transfer in complex turbulent flows, especially those relevant to turbomachinery, particle-laden flows, and separated flows, and to develop new techniques for precise control of gas and surface temperature during manufacturing processes.
-
Christopher Edwards
Professor of Mechanical Engineering, Emeritus
BioThe Edwards research group is focused on fundamental research for advanced energy technologies. The group performs theoretical and experimental studies of energy transformations such that the conversion process can be made cleaner, more efficient, and more controllable than has been possible with traditional technologies. Applications include advanced transportation engines (piston and turbine) and advanced electric power generation with carbon mitigation.
-
Matthew R. Edwards
Assistant Professor of Mechanical Engineering
BioMatthew Edwards is an Assistant Professor of Mechanical Engineering. His research applies high-power lasers to the development of optical diagnostics for fluids and plasmas, the study of intense light-matter interactions, and the construction of compact light and particle sources, combining adaptive high-repetition-rate experiments and large-scale simulations to explore new regimes in fluid mechanics, thermodynamics, materials science, and plasma physics.
Matthew received BSE, MA, and PhD degrees in Mechanical and Aerospace Engineering from Princeton University. He was then a Lawrence Fellow in the National Ignition Facility and Photon Science Directorate at Lawrence Livermore National Laboratory. -
Efe Eroz
Ph.D. Student in Mechanical Engineering, admitted Autumn 2026
BioMy personal website and LinkedIn can be found at https://efeeroz.github.io/ and https://www.linkedin.com/in/efe-eroz/ respectively. Please feel free to get in touch at efe@stanford.edu .
-
Vivian Feig
Assistant Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Feig lab aims to develop low-cost, noninvasive, and widely-accessible medical technologies that integrate seamlessly with the human body. We accomplish this by developing functional materials and devices with dynamic mechanical properties, leveraging chemistry and physics insights to engineer novel systems at multiple length scales. In pursuit of our goals, we maintain a strong emphasis on integrity and diversity, while nurturing the intellectual curiosity and holistic growth of our team members as researchers, communicators, and leaders.
-
Tim Flint
Ph.D. Student in Mechanical Engineering, admitted Autumn 2017
BioI am a PhD candidate in the Department of Mechanical Engineering at Stanford University working with Professor Parviz Moin . My PhD research is on the receptivity of the flow field around high-speed bodies. I hope to understand how free-stream disturbances excite instabilities that may grow and become relevant to boundary layer transition in high-speed flight.
-
Sean Follmer
Associate Professor of Mechanical Engineering and, by courtesy, of Computer Science
Current Research and Scholarly InterestsHuman Computer Interaction, Haptics, Robotics, Human Centered Design
-
Lorenza Garau Paganella
Postdoctoral Scholar, Mechanical Engineering
BioLorenza was born in Italy in 1997 and is currently a postdoctoral fellow at Stanford University with Prof. Chaudhuri, supported by an SNSF fellowship. Her research focuses on engineering biomaterials to investigate cell–extracellular matrix interactions and mechanotransduction in 2D and 3D cell cultures, aiming to advance biomedical understanding of tissue remodeling and disease.
Lorenza obtained her PhD (2024) in Mechanical and Process Engineering from ETH Zurich, where she developed hydrogel scaffolds and protocols for protein isolation to study cell behavior in engineered microenvironments.
Before her PhD, Lorenza completed her MSc at ETH Zurich and BSc at University of Trieste in Process Engineering, graduating both cum laude. During this time her focus was on biomaterials for drug delivery which she complemented with an internship in Roche. She has worked in interdisciplinary teams combining engineering and biology and is motivated by research that bridges fundamental science with clinical impact. -
J. Christian Gerdes
Professor of Mechanical Engineering, Emeritus
BioChris Gerdes is a Professor Emeritus of Mechanical Engineering at Stanford University. His laboratory studies how cars move, how humans drive cars and how to design future cars that work cooperatively with the driver or drive themselves. Vehicles in the lab include X1, a student-built electric, steer-by-wire test vehicle; Takumi, a modified Toyota Supra capable of autonomous drifting in tandem with another car; and Marty, the electrified, automated, drifting DeLorean. Chris' interests in vehicle safety extend to ethics and government policy, having helped to develop the US Federal Automated Vehicle Policy while serving as the first Chief Innovation Officer of the US Department of Transportation.
-
Siegfried Glenzer
Professor of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsPlease see our website for detailed information: https://heds.slac.stanford.edu
-
Kenneth Goodson
Vice Provost for Graduate Education and Postdoctoral Affairs, Davies Family Provostial Professor, and Professor, by courtesy, of Materials Science and Engineering
Current Research and Scholarly InterestsProf. Goodson’s Nanoheat Lab studies heat transfer in electronic nanostructures, microfluidic heat sinks, and packaging, focussing on basic transport physics and practical impact for industry. We work closely with companies on novel cooling and packaging strategies for power devices, portables, ASICs, & data centers. At present, sponsors and collaborators include ARPA-E, the NSF POETS Center, SRC ASCENT, Google, Intel, Toyota, Ford, among others.
-
Catherine Gorle
Associate Professor of Civil and Environmental Engineering and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsGorle's research focuses on the development of predictive flow simulations to support the design of sustainable buildings and cities. Specific topics of interest are the coupling of large- and small-scale models and experiments to quantify uncertainties related to the variability of boundary conditions, the development of uncertainty quantification methods for low-fidelity models using high-fidelity data, and the use of field measurements to validate and improve computational predictions.
-
Wendy Gu
Associate Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Gu Group studies the mechanical behavior and advanced fabrication of metals and ceramics. Current areas of research include the mechanics of solid-state battery materials, soft magnetic alloys and composites, and structural alloys in extreme environments.
-
Angel Gunaman
Office Aide, Contingent
Undergraduate, Management Science and Engineering
Undergraduate, Mechanical EngineeringBioI'm a Mechanical Engineering major at Stanford, concentrating in Product Realization and minoring in Management Science & Engineering. I'm passionate about building meaningful technology and have experience in engineering research, product development, and public sector infrastructure.
-
Kai Douglas Hammond
Undergraduate, Mechanical Engineering
BioClass of 2027. Stanford Undergraduate majoring in Mechanical Engineering.
-
Ronald Hanson
Clarence J. and Patricia R. Woodard Professor of Mechanical Engineering
Current Research and Scholarly InterestsProfessor Hanson has been an international leader in the development of laser-based diagnostic methods for combustion and propulsion, and in the development of modern shock tube methods for accurate determination of chemical reaction rate parameters needed for modeling combustion and propulsion systems. He and his students have made several pioneering contributions that have impacted the pace of propulsion research and development worldwide.
