School of Engineering
Showing 101-200 of 543 Results
-
Mark Cutkosky
Fletcher Jones Professor in the School of Engineering
BioCutkosky applies analyses, simulations, and experiments to the design and control of robotic hands, tactile sensors, and devices for human/computer interaction. In manufacturing, his work focuses on design tools for rapid prototyping.
-
Eric Darve
Director, Institute for Computational and Mathematical Engineering (ICME), Professor of Mechanical Engineering and, by courtesy, of Computer Science
Current Research and Scholarly InterestsThe research interests of Professor Darve span across several domains, including machine learning for science and engineering, large-language models, transformer models, surrogate and reduced order modeling, stochastic inversing, anomaly detection, numerical linear algebra, high-performance, parallel, and GPU computing.
-
David Davidson
Research Assistant, Mechanical Engineering - Thermosciences
BioEducation
University of Toronto Physics B.S (1978)
University of Toronto Aerospace Sciences M.Sc. (1980)
York University Physics Ph.D. (1986)
Appointment:
1986-present Senior Research Engineer, Mechanical Engineering Department
Research Activities:
Dr. Davidson’s research interests span the fields of gas dynamics and combustion kinetics. During his tenure at Stanford University he investigated the chemical kinetics of combustion using a wide array of optical and laser-based diagnostic methods and advanced the use of these diagnostics in shock tubes. He co-authored over 350 research publications with his students and Professor Ronald Hanson. He continues to advise and mentor the graduate students who use shock tubes in the High Temperature Gasdynamics Laboratories. An overview of the shock tube studies performed at Stanford under Prof. Hanson’s and Dr. Davidson’s supervision can be found in the report entitled “Fundamental Kinetics Database Utilizing Shock Tube Measurements” available at http://purl.stanford.edu/kb621cw6967.
He claims he is now retired, but apparently, he is still working. -
Scott L. Delp, Ph.D.
Director, Wu Tsai Human Performance Alliance at Stanford, James H. Clark Professor in the School of Engineering, Professor of Bioengineering and of Mechanical Engineering
On Partial Leave from 2026-10-01 To 2027-06-30Current Research and Scholarly InterestsExperimental and computational approaches to study human movement. Development of biomechanical models to analyze muscle function, study movement abnormalities, design medical products, and guide surgery. Imaging and health technology development. Discovering the principles of peak performance to advance human health. Human performance research. Wearable technologies, video motion capture, and machine learning to enable large-scale analysis.
-
Stefan P. Domino
Visiting Scholar, Mechanical Engineering - Center for Turbulence Research
BioDr. Stefan Domino’s research interest rests within low-Mach fluid mechanics methods development for marine ethology-based systems that drive the coupling of mass, momentum, species and energy transport. His core research resides within the intersection of physics elucidation, numerical methods research, V&V techniques exploration, and high performance computing and coding methods. Stefan supports Stanford's School of Engineering including roles as an Adjunct Professor and Visiting Senior Fellow at the Center for Turbulence Research, is a former Distinguished Member of the Technical Staff at Sandia National Laboratories, and is the CEO of the 501(c)(3) Computational Marine Ethology Research Institute, https://www.comeri.org
Education: University of Utah
Ph.D. Department of Chemical Engineering, 2000
"Methods towards improved simulations for the oxides of nitrogen in pulverized-coal furnaces"
Professor Philip J. Smith, Advisor
Select Recent Publications:
* Domino, S. P., Scott, S., Hubbard, J., "Structural uncertainty assessment for fire-engulfed objects in crosswind: Establishing credibility for a multiphysics wall-modeled large-eddy simulation paradigm", Phys. Rev. Fluids, 2025.
* Domino, S. P., "On the subject of large-scale pool fires and turbulent boundary layer interactions", Phys. Fluids, 2024.
* Domino, S. P., Wenzel, E. A, "A direct numerical simulation study for confined non-isothermal jet impingement at moderate nozzle-to-plate distances: capturing jet-to-ambient density effects", Int. J. Heat Mass Trans, 2023.
* Benjamin, M., Domino, S. P., Iaccarino, G., "Neural networks for large eddy simulations of wall-bounded turbulence: numerical experiments and challenges", Eur. Phys. J. E., 2023.
* Hubbard, J., Cheng, M., Domino, S. P., "Mixing in low-Reynolds number reacting impinging jets in crossflow", J. Fluids Engr., 2023.
* Domino, S. P. “Unstructured finite volume approaches for turbulence,” in Numerical Methods in Turbulence Simulation, edited by R. Moser (Elsevier, 2023), Ch. 7, pp. 285–317.
* Scott, S., Domino, S. P., "A computational examination of large-scale pool fires: variations in crosswind velocity and pool shape", Flow, 2022.
* Domino, S. P., Horne, W., "Development and deployment of a credible unstructured, six-DOF, implicit low-Mach overset simulation tool for wave energy applications", Renew. Energy, 2022.
* Hubbard, J., Hansen, M., Kirsch, J., Hewson, J., Domino, S. P., “Medium scale methanol pool fire model validation”, J. Heat Transfer, 2022.
* Barone, M., Ray, J., Domino, S. P., "Feature selection, clustering, and prototype placement for turbulence datasets", AIAA J., 2021,
* Domino, S. P., Hewson, J., Knaus, R., Hansen, M., "Predicting large-scale pool fire dynamics using an unsteady flamelet- and large-eddy simulation-based model suite", Phys. Fluids, 2021.
* Domino, S. P., "A case study on pathogen transport, deposition, evaporation and transmission: linking high-fidelity computational fluid dynamics simulations to probability of infection", Int. J. CFD, 2021.
* Domino, S. P., Pierce, F., Hubbard, J., "A multi-physics computational investigation of droplet pathogen transport emanating from synthetic coughs and breathing", Atom. Sprays, 2021.
* Jofre, L., Domino, S. P., Iaacarino, G., "Eigensensitivity analysis of subgrid-scale stresses in large-eddy simulation of a turbulent axisymmetric jet", Int. J. Heat Fluid Flow, 2019.
* Domino, S. P., Sakievich, P., Barone, M., "An assessment of atypical mesh topologies for low-Mach large-eddy simulation", Comp. Fluids, 2019.
* Domino, S. P., "Design-order, non-conformal low-Mach fluid algorithms using a hybrid CVFEM/DG approach ", J. Comput. Physics, 2018.
* Jofre, L., Domino, S. P., Iaacarino, G., "A Framework for Characterizing Structural Uncertainty in Large-Eddy Simulation Closures", Flow Turb. Combust., 2018.
CV: https://github.com/spdomino/cv/blob/main/dominoCV.pdf -
Leora Dresselhaus-Marais
Assistant Professor of Materials Science and Engineering, of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsMy group develops new methods to update old processes in metals manufacturing
-
John Eaton
Charles Lee Powell Foundation Professor in the School of Engineering, Emeritus
BioEaton uses experiments and computational simulations to study the flow and heat transfer in complex turbulent flows, especially those relevant to turbomachinery, particle-laden flows, and separated flows, and to develop new techniques for precise control of gas and surface temperature during manufacturing processes.
-
Christopher Edwards
Professor of Mechanical Engineering, Emeritus
BioThe Edwards research group is focused on fundamental research for advanced energy technologies. The group performs theoretical and experimental studies of energy transformations such that the conversion process can be made cleaner, more efficient, and more controllable than has been possible with traditional technologies. Applications include advanced transportation engines (piston and turbine) and advanced electric power generation with carbon mitigation.
-
Matthew R. Edwards
Assistant Professor of Mechanical Engineering
BioMatthew Edwards is an Assistant Professor of Mechanical Engineering. His research applies high-power lasers to the development of optical diagnostics for fluids and plasmas, the study of intense light-matter interactions, and the construction of compact light and particle sources, combining adaptive high-repetition-rate experiments and large-scale simulations to explore new regimes in fluid mechanics, thermodynamics, materials science, and plasma physics.
Matthew received BSE, MA, and PhD degrees in Mechanical and Aerospace Engineering from Princeton University. He was then a Lawrence Fellow in the National Ignition Facility and Photon Science Directorate at Lawrence Livermore National Laboratory. -
Efe Eroz
Ph.D. Student in Mechanical Engineering, admitted Autumn 2026
Masters Student in Mechanical Engineering, admitted Autumn 2026BioMy personal website and LinkedIn can be found at https://efeeroz.github.io/ and https://www.linkedin.com/in/efe-eroz/ respectively. Please feel free to get in touch at efe@stanford.edu .
-
Vivian Feig
Assistant Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Feig lab aims to develop low-cost, noninvasive, and widely-accessible medical technologies that integrate seamlessly with the human body. We accomplish this by developing functional materials and devices with dynamic mechanical properties, leveraging chemistry and physics insights to engineer novel systems at multiple length scales. In pursuit of our goals, we maintain a strong emphasis on integrity and diversity, while nurturing the intellectual curiosity and holistic growth of our team members as researchers, communicators, and leaders.
-
Tim Flint
Ph.D. Student in Mechanical Engineering, admitted Autumn 2017
BioI am a PhD candidate in the Department of Mechanical Engineering at Stanford University working with Professor Parviz Moin . My PhD research is on the receptivity of the flow field around high-speed bodies. I hope to understand how free-stream disturbances excite instabilities that may grow and become relevant to boundary layer transition in high-speed flight.
-
Sean Follmer
Associate Professor of Mechanical Engineering and, by courtesy, of Computer Science
Current Research and Scholarly InterestsHuman Computer Interaction, Haptics, Robotics, Human Centered Design
-
Lorenza Garau Paganella
Postdoctoral Scholar, Mechanical Engineering
BioLorenza was born in Italy in 1997 and is currently a postdoctoral fellow at Stanford University with Prof. Chaudhuri, supported by an SNSF fellowship. Her research focuses on engineering biomaterials to investigate cell–extracellular matrix interactions and mechanotransduction in 2D and 3D cell cultures, aiming to advance biomedical understanding of tissue remodeling and disease.
Lorenza obtained her PhD (2024) in Mechanical and Process Engineering from ETH Zurich, where she developed hydrogel scaffolds and protocols for protein isolation to study cell behavior in engineered microenvironments.
Before her PhD, Lorenza completed her MSc at ETH Zurich and BSc at University of Trieste in Process Engineering, graduating both cum laude. During this time her focus was on biomaterials for drug delivery which she complemented with an internship in Roche. She has worked in interdisciplinary teams combining engineering and biology and is motivated by research that bridges fundamental science with clinical impact. -
J. Christian Gerdes
Professor of Mechanical Engineering, Emeritus
BioChris Gerdes is a Professor Emeritus of Mechanical Engineering at Stanford University. His laboratory studies how cars move, how humans drive cars and how to design future cars that work cooperatively with the driver or drive themselves. Vehicles in the lab include X1, a student-built electric, steer-by-wire test vehicle; Takumi, a modified Toyota Supra capable of autonomous drifting in tandem with another car; and Marty, the electrified, automated, drifting DeLorean. Chris' interests in vehicle safety extend to ethics and government policy, having helped to develop the US Federal Automated Vehicle Policy while serving as the first Chief Innovation Officer of the US Department of Transportation.
-
Siegfried Glenzer
Professor of Photon Science and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsPlease see our website for detailed information: https://heds.slac.stanford.edu
-
Kenneth Goodson
Vice Provost for Graduate Education and Postdoctoral Affairs, Davies Family Provostial Professor, and Professor, by courtesy, of Materials Science and Engineering
Current Research and Scholarly InterestsProf. Goodson’s Nanoheat Lab studies heat transfer in electronic nanostructures, microfluidic heat sinks, and packaging, focussing on basic transport physics and practical impact for industry. We work closely with companies on novel cooling and packaging strategies for power devices, portables, ASICs, & data centers. At present, sponsors and collaborators include ARPA-E, the NSF POETS Center, SRC ASCENT, Google, Intel, Toyota, Ford, among others.
-
Catherine Gorle
Associate Professor of Civil and Environmental Engineering and, by courtesy, of Mechanical Engineering
Current Research and Scholarly InterestsGorle's research focuses on the development of predictive flow simulations to support the design of sustainable buildings and cities. Specific topics of interest are the coupling of large- and small-scale models and experiments to quantify uncertainties related to the variability of boundary conditions, the development of uncertainty quantification methods for low-fidelity models using high-fidelity data, and the use of field measurements to validate and improve computational predictions.
-
Alex Granieri
Lecturer, Design Courses
BioPrior to joining the Design Group in the Mechanical Engineering Department, I spent almost 20 years in industry working primarily in the fields of Sustainable Mobility, Robotics and Consumer Electronics. From building prototype vehicles at Tesla to the original Alexa devices at Amazon and high altitude aircrafts along the way at Facebook, I’ve had the privilege to contribute to many “firsts” in my career. I am passionate about project-based learning and creating opportunities for students to be part of crafting their own educational journey.
-
Wendy Gu
Associate Professor of Mechanical Engineering and, by courtesy, of Materials Science and Engineering
BioThe Gu Group studies the mechanical behavior and advanced fabrication of metals and ceramics. Current areas of research include the mechanics of solid-state battery materials, soft magnetic alloys and composites, and structural alloys in extreme environments.
-
Angel Gunaman
Office Aide, Contingent
Undergraduate, Management Science and Engineering
Undergraduate, Mechanical EngineeringBioI'm a Mechanical Engineering major at Stanford, concentrating in Product Realization and minoring in Management Science & Engineering. I'm passionate about building meaningful technology and have experience in engineering research, product development, and public sector infrastructure.
-
Turgut M Gür
Staff, Mechanical Engineering
Npl Research Liaison, Mechanical Engineering - DesignBioTurgut M. Gür is an Adjunct Professor of Materials Science and Engineering at Stanford University, where he recently retired after a distinguished career that included technical and management leadership for three major multi-disciplinary team-based research centers on campus focused on advanced materials and energy conversion and storage, namely, the DOE-EFRC Center on Nanostructuring for Efficient Energy Conversion (CNEEC), the NSF-MRSEC Center for Materials Research (CMR), and Geballe Laboratory for Advanced Materials (GLAM).
Currently, he is the President of The Electrochemical Society and chairs its Board of Directors and several other ECS committees. He is also an inducted Fellow of The Electrochemical Society.
In addition, he holds a Visiting Professor appointment from the Chinese University of Mining and Technology-Beijing (CUMTB) in China, and an "international mentor" appointment from the Norwegian University of Science and Technology (NTNU) in Trondheim, Norway.
He is an internationally recognized leader in high temperature electrochemical energy conversion and storage technologies, materials and processes with 11 US issued patents, 17 (published) patent applications, and 165 technical publications, largely related to energy conversion processes and materials including fuel cells, electrocatalysis, electrosynthesis, coal and hydrocarbon conversion, hydrogen production, and sensors and membranes. He has made nearly 150 oral presentations in national and international conferences, given 85 invited lectures, talks and colloquia, co-organized 24 international conferences and symposia, and co- edited 18 transaction volumes and proceedings.
In 2020, out of more than 186,000 energy scientists in the world, he is ranked the 702nd most cited energy researcher, and is also rated in the top 1% of most cited among all scientists in the world across all scholarly fields of sciences, engineering and medicine (https://journals.plos.org/plosbiology/article?id=10.1371/journal.pbio.3000918). Recently, he is also ranked in the top 5% of cited researcher in RSC journals by The Royal Society of Chemistry.
As an entrepreneur, he was involved in developing advanced technologies in several start-up companies developing supercapacitors, chemically assisted spontaneous production of hydrogen via steam electrolysis, carbon fuel cells for efficient conversion of coal, biomass and other solid fuels to electricity with total carbon capture, and industrial wastewater treatment based on electrochemical remediation by selective reduction and capacitive deionization.
He has served in top leadership positions on the boards of several professional societies as well as industrial and non-profit organizations. He has been on the Board of Directors of The Electrochemical Society for 6 years and was the Chair of the High Temperature Energy Materials and Processes division of the Society. Previously, he had served 3 terms on the Board of the International Society for Solid State Ionics (ISSI), which is another leading global society for scientists in electrochemical energy conversion and storage. Formerly, he was an Associate Editor of the Journal of the American Ceramic Society (2002-2014), and the editor for Solid State Ionics Letters (1998-2002).
He also volunteers his time as a Board Trustee and the former Vice President of the Turkish Educational Foundation, a charitable non-profit organization in the San Francisco Bay Area in California, USA, that provides financial support, scholarships and educational assistance annually to 2400 needy students in Turkey.
He holds BSc and MSc degrees in Chemical Engineering from the Middle East Technical University in Ankara, Turkey, and three graduate degrees including a Ph.D. in Materials Science and Engineering from Stanford University. -
Kai Douglas Hammond
Masters Student in Mechanical Engineering, admitted Autumn 2024
BioClass of 2027. Stanford Undergraduate majoring in Mechanical Engineering.
-
Ronald Hanson
Clarence J. and Patricia R. Woodard Professor of Mechanical Engineering
Current Research and Scholarly InterestsProfessor Hanson has been an international leader in the development of laser-based diagnostic methods for combustion and propulsion, and in the development of modern shock tube methods for accurate determination of chemical reaction rate parameters needed for modeling combustion and propulsion systems. He and his students have made several pioneering contributions that have impacted the pace of propulsion research and development worldwide.
